Why on earth would you machine a complete hub when the repair was pretty simple? That was better than the bolt on bearing housings used by chopper builders with 'custom' wheels (OCC, and others)
You should charge extra when customer doesn't even attempt to clean part before bringing it in. That was a very nice repair, wouldn't be economical to do it in USA as machining and labour charge would probably be higher than a new hub. Looked like you started 0.004" under-size but ended up with size on size for bearing?
Bạn làm rất tốt...Vấn đề ở đây tôi đang thắc mắc là số tiền bỏ ra gia công lại...đóng sơ mi kiên cố như vậy có bằng tiền bỏ ra mua cái đùm mới không thua ngài.!
🚫‼️It is not allowed to hold the lathe chuck by hand for braking in order to ensure proper braking, the brake belt in the front pulley should be replaced.‼️🚫
I already tried this before I was brought it to machine shop.same like this hub and process. After 1 week the thread was lossen.! Its better to buy new hub...
Interesting video, done purely for u tube money. You could go into vitrually any breakers shop and get a good serviceable hub complete with bearing and spacers etc. For about 5 bucks.
فیلمهای خوبی دارید ولی متوجه نمیشوم چرا تراشکارها در استفاده از قطعات این همه اصراف میکنند!!!؟؟ دراکثر فیلمها، قطعات یدکی را بسیار زیاد تراش میدهند و بخاطر یک سانتی متر خوردگی پنج سانتی متر دور ریخته میشود درصورتیکه نیاز به این همه دور ریز نیست!!
You could have turned an entire hub from scratch instead, would need to mill out the sprocket drive holes though. well done.
😮😮
If you do that, your hub will surely break, cause without the rubber spacer the impact between the well and chain will absorb the hub alone.
Why on earth would you machine a complete hub when the repair was pretty simple?
That was better than the bolt on bearing housings used by chopper builders with 'custom' wheels (OCC, and others)
1
, @@bruceenriquez1667
Q
You should charge extra when customer doesn't even attempt to clean part before bringing it in.
That was a very nice repair, wouldn't be economical to do it in USA as machining and labour charge would probably be higher than a new hub.
Looked like you started 0.004" under-size but ended up with size on size for bearing?
Bạn làm rất tốt...Vấn đề ở đây tôi đang thắc mắc là số tiền bỏ ra gia công lại...đóng sơ mi kiên cố như vậy có bằng tiền bỏ ra mua cái đùm mới không thua ngài.!
Ustad ji
Verry good .
👍🥰
Supreme work... cleaver Pakistani..
From srilanka
ต้องยอมรับความสามารถของเขาสุดยอด
🚫‼️It is not allowed to hold the lathe chuck by hand for braking in order to ensure proper braking, the brake belt in the front pulley should be replaced.‼️🚫
อินเดียช่อมเก่ง แต่ดูแล้วแต่ละงาน เกิดจากโครงสร้างไม่แข็งแรง ของเครื่องจักร จึงทำให้เกิดการช่อมบ่อย อาจเป็นกลยุทธ์ของผู้สร้างเพื่อให้เกิดงานในประเทศ เคยเห็นรถไถล้อแกนขาด อยากให้อินเดียเอารถไถไทยไปใช้ ไม่มีขาด
Outstanding repair job !
Muy buen trabajo maestro Tornero ,quedo exelente
เก่งมากฮาบัง
Muy imprecionantes son ustedes , mis respetos.👏👏
Vous êtes un professionnel exceptionnel. Bon travail.
Good as new. Top job mate!
Más caro q comprar uno nuevo 😂
It won't last long..Been done that..ended up buying New One...
Golden hands! Super master!!!
बहोत बडीया
Perfecto trabajo amigo !!! saludos desde ARGENTINA!!
Nice.working.job
Good job pare
Gostei bastante até me inscrevi no seu canal.
I already tried this before I was brought it to machine shop.same like this hub and process. After 1 week the thread was lossen.! Its better to buy new hub...
Interesting video, done purely for u tube money. You could go into vitrually any breakers shop and get a good serviceable hub complete with bearing and spacers etc. For about 5 bucks.
Nice one
very interesting...
Se fizer esse trabalho no Brasil, custa mais caro que comprar o cubo...
Sukses buat anda
Amazing brother
Ide yang kreatif dan bagus
+ 1 inscrito no canal
Saudações do Brasil 🤝
Thanks
The best 👍
สุดยอดจริงๆๆ
Very good
Muito bom serviço
Difference between new cost and repairing cost.
Is it safe ?
Cái này ở Việt Nam chúng tôi làm lâu rồi
Короче, если сломается летучий корабль, чинить в пакистане!
Required dia possible in 4 cuts.
La hace muy largo el tiempo para cobrar más 😢
biaya serfisnya setara dengan harga barunya😂😂
Terbaik
Nên.co.vay tôi.lam...?
Super
Good turner but do not take precautions.
Great work but why even bother to repair this? It's far cheaper to just buy new.
Pakistan is on embargo or something?
Apakah di Pakistan suku cadang sepeda motor sulit di temukan dan kudu mengimpor dari negara India 😢
Gue trabajó tan elegante
❤❤❤❤❤❤
talented
Biayanya mahal gak?
Imagine if the tread became loose😂
👍👍👍
Brasil
Sa an po ba iyan logar pa macin scap
Isaka Kitna paisa liya
All that work then he bashes the center part of the bearing - so that's the bearing shot already - Doh !
Trow it away and better buy a new one!..
This is so weak. Just buy a new one
Новой нет в продаже.
فیلمهای خوبی دارید ولی متوجه نمیشوم چرا تراشکارها در استفاده از قطعات این همه اصراف میکنند!!!؟؟
دراکثر فیلمها، قطعات یدکی را بسیار زیاد تراش میدهند و بخاطر یک سانتی متر خوردگی پنج سانتی متر دور ریخته میشود درصورتیکه نیاز به این همه دور ریز نیست!!
A qui después q no sirve para motos, se funde para ser carderos
❤❤❤❤❤❤❤❤❤❤❤❤❤
just buy a new one
Buy order
Sus sa pinoy nyo lang natutunan yan🤣🤣🤣
Using machine is not amazing, that ideas made the material weaker than original ang too much time wasting, just buy a new one plug n play!
Новой детали нет. Делают так.
Joecoolatienza7090 , you do not know what you have just watched. What makes you think negatively?
No
...
Vocês e retados mesmo
Excellent job like no other!!
Super