So he’s using a piece of wood and a wood mallet to straighten the rim. Correct me if I’m wrong, but isn’t this exactly the way to reshape steel without leaving work marks? It seems like you can see him hitting the rim multiple times without leaving any marks.
Com certeza é. Esses caras são do Pakistao e lá eles conseguem com ferramentas caseiras e muita engenhosidade fabricar em metais praticamente tudo que você possa imaginar .
Esse é o país mais ecológico do mundo! Os caras reaproveitam tudo,com extrema dedicação e profissionalismo,só posso dizer que eles merecem tudo de bom.
The dexterity of the installation and naive spectators think that this Pakistani mechanic straightened out a rather complex rim profile in a couple of blows. Moreover, with deformations in the stiffeners. Such a defect can, in principle, be corrected, but the process will be quite long and special mandrels will be needed to restore the profile. An attentive viewer will notice that at the beginning of the video there will be four rims standing against the wall with his back to which this Pakistani guy will be working, and then surprisingly there will be three of them...)))
Where do you think those spare rims came from? He'll straighten the rim from this bike between other customer work. Notice the rim he used was also a used part. He didn't give up on straightening the dented rim, he used a better one because the customer was waiting.
@@alan_2056yeah, which is why when he pulled the tire from the "customers" rim there was mysteriously no tube to be seen 😂 because he magically made it disappear. Fake from the start my friend.
Я получил огромное удовольствие от просмотра ❤ представил,что я тот парень, что сломал колесо. Нашёл этого мастера и он сделал колесо, как новое❤ те же чувства испытываю,когда забираю свой авто после длительного проф ремонта 🎉
When we were 8 or 9 back in the 50's an old chap by the name of Bill Whittle had a bike shop that he would let us hang out of and do repairs on his forecourt to our bikes, a lot of which were made from parts grabbed from the local scrap yard anyhoo, Bill taught us how to straighten out dents and buckles using the spokes and a spoke spanner something I was able to pass onto my grandson, who couldn't seem to get how to ride a kerb, 50 years later but as for the damage I could see here I'm not so sure but hey who cares.
ما شاء الله على الشعب الباكستاني المسلم والله إني أحبكم في الله، الشعب الباكستاني الوحيد هو القادر أن يعيد رجاله استخدام كل شيء بتفان شديد واحترافية، والله لا يسعني إلا أن أرفع له القبعة وأقول إنه يستحق كل التقدير والإحترام .
Even if he swapped the rim, its some of a puzzle to get together all the spokes. Still respectful job. Maybe he swapped rims to make the vid look more perfect...this time. I am sure he could get the rim working, but not without marks or scratches. I've seen worse hoaxes, like gov-style scams ruining innocent people everyday etc.
Quanto tempo gasto para recuperar uma roda de motocicleta, trabalho manual cujo valor é menor que o preço de um aro e raios. Antes de criticar, conheça o meio onde eles vivem, quais suas dificuldades sua cultura - Suas habilidades são dignas de respeito - A sobrevivência está acima da segurança. How much time does it take to repair a motorcycle wheel, manual labor whose value is less than the price of a rim and spokes. Before criticizing, get to know the environment in which they live, their difficulties and their culture - Their skills are worthy of respect - Survival comes before safety.
Another reason why you should rather buy a new Motorbike in those contries when you want to travel there on Holiday by motorbike. In no scenario I would want to drive around with a wheel like that!Too risky!
Hmmm... the rim suddenly became round without any marks from the hammering, amazing.
Typical Indian trickery…
Nicht der geringste Kratzer oder Dellen vom Hammerschlag zu sehen, erstaunlich! 🤣
@@charlestisserand7947Die können sogar im Dreck sitzend zaubern. Klasse!
So he’s using a piece of wood and a wood mallet to straighten the rim. Correct me if I’m wrong, but isn’t this exactly the way to reshape steel without leaving work marks? It seems like you can see him hitting the rim multiple times without leaving any marks.
Они в тапках металл плавят, не удивляйся. )))))))))))
If this is the original bent rim, then this guy is incredible. Just lacing and truing and balancing a wheel is difficult. Good job.
Com certeza é. Esses caras são do Pakistao e lá eles conseguem com ferramentas caseiras e muita engenhosidade fabricar em metais praticamente tudo que você possa imaginar .
Fake
No dear I witness that with little tool they perfectly treat balance wheel
I don't know. You can fix little dents in aluminum alloy rims, but trying to fix a dent like that is bound to crack the rim.
@@serhiyranush4420 The rim is made of steel, not alu.
По моему он просто другой обод поставил, а тот что был погнут в конце видео 8:38 валялся рядом с двумя другими🤣
точно,он так и сделал,развод для лохов.
100 пудов для просмотра , какие тока фокусы не увидешь аху.....ть
А то что 1:23 он снимает покрышку без камеры не смутило?
@@tulaabc жулик😅
Я тоже сразу обратил на это внимание
Esse é o país mais ecológico do mundo! Os caras reaproveitam tudo,com extrema dedicação e profissionalismo,só posso dizer que eles merecem tudo de bom.
Tak se podívejte jak recyklují autobaterie. Ekologické 😂.
@@petrstraka8582 escreva em português,sua mula !
Öyle bükülmüş bir çember asla düzelmez
Doğru diyosun o başka bir çember
Yersen
Fake.
@@DartVader1984 absolutely
The dexterity of the installation and naive spectators think that this Pakistani mechanic straightened out a rather complex rim profile in a couple of blows. Moreover, with deformations in the stiffeners. Such a defect can, in principle, be corrected, but the process will be quite long and special mandrels will be needed to restore the profile.
An attentive viewer will notice that at the beginning of the video there will be four rims standing against the wall with his back to which this Pakistani guy will be working, and then surprisingly there will be three of them...)))
If this guy straightened the original bent rim as shown, then I am the president of USA. Blocking this channel.
@@olevaiti4302 I think that you were a better president than the current stumbling old man!))))
Where do you think those spare rims came from? He'll straighten the rim from this bike between other customer work. Notice the rim he used was also a used part. He didn't give up on straightening the dented rim, he used a better one because the customer was waiting.
@@alan_2056yeah, which is why when he pulled the tire from the "customers" rim there was mysteriously no tube to be seen 😂 because he magically made it disappear. Fake from the start my friend.
Я получил огромное удовольствие от просмотра ❤ представил,что я тот парень, что сломал колесо. Нашёл этого мастера и он сделал колесо, как новое❤ те же чувства испытываю,когда забираю свой авто после длительного проф ремонта 🎉
El cambio del aro roto por otro en buen estado no se ha notado demasiado🤣🤣🤣🤣
2:44 jackpot xD
La professionalità di questo artigiano è stata quella di sostituire il cerchio.
Yes.
Pra mim não é o mesmo aro, com aquela dobradura jamais ficaria liso e perfeito, até podera rodar mas com imperfeições
هذا صحيح
When we were 8 or 9 back in the 50's an old chap by the name of Bill Whittle had a bike shop that he would let us hang out of and do repairs on his forecourt to our bikes, a lot of which were made from parts grabbed from the local scrap yard anyhoo, Bill taught us how to straighten out dents and buckles using the spokes and a spoke spanner something I was able to pass onto my grandson, who couldn't seem to get how to ride a kerb, 50 years later but as for the damage I could see here I'm not so sure but hey who cares.
إحترافية ومهارة كبيرتين إنه العمل اليدوي
ما شاء الله على الشعب الباكستاني المسلم والله إني أحبكم في الله، الشعب الباكستاني الوحيد هو القادر أن يعيد رجاله استخدام كل شيء بتفان شديد واحترافية، والله لا يسعني إلا أن أرفع له القبعة وأقول إنه يستحق كل التقدير والإحترام .
Yes!
Despite the lies
I wish the world had more people like this guy. Awesome work man
He ran into a light post on a straight road in broad daylight?! Incredible!
This man has my deepest respect, he is the very definition of ‘make do’.
the skillful hands of a repairman can do even the impossible!😊
Very caring ,fully devoted mechanic,my personal best wishes as well as similar prayers to Almighty.
Muy buen arreglo!!!amigo!!!👍👏👏👏yo hace tiempo arregle una que estaba la mitad de doblada que esa!!!y que bien dentro de todo!!!😀
at 8:38 you can see the bent rim on the right hand side bottom of the screen.
The 3 rims? One is split-broken.
I think he cheated in this vid, but he may have other rims laying around aswell :)
А зачем он старый обод колотил? Мастерство показывал?
Затем что нового нет или дорого, что непонятно русский
@@alexsu9007А зачем он потом новый колотит, когда рядом старый валяется?
@@АлексейЕфимов-ц3к он старый колотил, что не понятно рузкий
@@КаримаКадыровна-е2о то есть он такой же глупый как и ты
Чтобы можно было в комментах выявить каклопитеков верящих в сказки и незнающих про возможности монтажа 🤣
Wow! Really, this is a very nice & excellent video.
Das hätte in Deutschland niemand gemacht.
Eine super Handarbeit.
Vielen Dank für den schönen Beitrag.
Germany
Da arbeitet auch niemand um einen Stundenlohn von 0,50€ ! 🤣
@@charlestisserand7947 Ich dachte da mehr an Lustlosigkeit....
This would not be legal in some countries, a new rim and spokes would be needed.
@@alan_2056 Legal is fiction. Fiction is to control and make profit for "the owners...".
Nobody would throw away a bent rim and swap it for a new one? Because that's all he did...
Rim swaps at 2:49 What a hoax !
Even if he swapped the rim, its some of a puzzle to get together all the spokes.
Still respectful job.
Maybe he swapped rims to make the vid look more perfect...this time. I am sure he could get the rim working, but not without marks or scratches.
I've seen worse hoaxes, like gov-style scams ruining innocent people everyday etc.
El centrado de la rueda siempre es trabajoso y complejo, así mismo quedo excelente 👌 👏
Muito bom o serviço, ficou top
An incredible story, when removing the tire - 1:23, it is revealed that the tube is missing - the episode is rigged.
The rim is a new old one... :)
It's a very good result.
So good...one would believe they swapped the bent rim for another, straight, one.... 😂
There are some peoples how believe it's not real but I witnessed in Pakistan 🇵🇰 there are very amazing workers and do work with very little machines
@@EUROSPORTS4TECH respect 🫡
Bro, he pulled the tire off and there was no tube...it was fake from the start. Pay attention.
But also, I have a bridge to sell you.
I can't believe I saw it myself...a craftsman's hand
Amazing.
big respect from Germany
@@Michael-o3t1w thank you sir 🫡
NOT the same rim!!!!
Quanto tempo gasto para recuperar uma roda de motocicleta, trabalho manual cujo valor é menor que o preço de um aro e raios. Antes de criticar, conheça o meio onde eles vivem, quais suas dificuldades sua cultura - Suas habilidades são dignas de respeito - A sobrevivência está acima da segurança.
How much time does it take to repair a motorcycle wheel, manual labor whose value is less than the price of a rim and spokes. Before criticizing, get to know the environment in which they live, their difficulties and their culture - Their skills are worthy of respect - Survival comes before safety.
These truths have been obscured in out consumer driven culture. Lets all bring them back.
Incrível! E tudo feito no chão! Parabéns!
bravo Monsieur !
Most of the world works on the ground, don't be snobs saying he needs a workbench.
No inner tube on a tube tyre and no hammer marks! These must be magicians.
Mis respeto!!!! Muy profecional, quedo salida de fabrica. Bendiciones🇦🇷💖
素晴らしい技術ですね
A master at work! Well done.🇨🇮🇵🇸
That is very skillful........................ a pleasure to watch.
Good job
Very Very good
An great work
Very well done.
MashAllah
Zabardast karigar
ESPECTACULAR,,UN MAESTRO 🤝💪💪💪✍️
Amazing talent 👏
мухлеж, обод подменили!
The driver took a jump in the ditch. Meanwhile some metal artists fixed his bent rim.
Pode ser que o aro tenha sido trocado por um outro em melhor estado. É difícil recuperar um aro sem deixar marcas.
Ok 👍 to są fachowcy , specjaliści wysokiej klasy
Покрышку снял, а камеры нет. Он на ободе что ли ехал? По одному гнутому ободу постучал, потом взял другой, переспицевал ступицу и готово.
The bent rim is just behind him 7:18 😂 great job though!
SUPER WORK❤❤❤❤❤
Dit is echt vakwerk heel mooi gedaan👍
it seems the broken rim was not the one used here, it might be changed. ???
bravo monsieur
True master...just needs a bench
Good skills baljeet
India people very bright very talented
@@nestorechavez this is Pakistani artisan
@@globalartiisans ohh I'm sorry sir Im just admiring your great job Pakistan is great
this guy is Pakistani not Indian
Very scammy, very fake.
Nice
ឡូយមេមេ😮
real bikers
Super❤....ALBANIA 🇦🇱
Very good
Akurat ze pouzil iny rafik, nevyrovnal povodny...
Kamal Ast.... 👌
He hide tha fact that he CHANGE the rim because he can not straightened the bended rim !
Change rim
I have machine wheel spoke balance any rim accident with in five minutes start
Nice job bhai sab
🎉super
Отличная работа.
o Aro não é o Mesmo, eles trocaram podem reparar a fisionomia de um aro para o outro.
Respect !
Та ладно там, випрямив чи поміняв. Тут питання як його погнуть так можна?
Hello ❤❤❤🎉🎉🎉
@@LanDaiLyLife yes
La llanta fue reutilizada para trollear a 500mil personas😂
Heel erg knap zeg wauw.
What happened to the empty rim that was leaning against the wall
Вообще молодцы
Excellent
Kemah ngat towing
Master !!!!!
آفرین😂
Kind of hard to believe this is the original rim.
Nice video
Respect 🫡
Nice video very good kob👍
o cara trocou a calhar
Them fellas in pakistan can fix anything with a rock and a brick😬👍🏻
If this MAN was to charge the amount that would equal the cost for new he wouldn't make enough to live
Senzational!!!!
I like the....voices!
No te kleo dijo el chinitoo ... 😂
Если космическая станция упадет в индии они ее отремонтируют и назад запустят, для них нет нечего невозможного.
He really needs a worktable and a chair !!
Working on the ground saves time each time parts fall to the ground.
@@ralorpa If he keeps dropping things on the gound, he should look for another job….
Ремонт с помощью молотка и какой то матери!
Perfekt 😊
Ай шайтан!
Bớt giỡn đi bạn hiền làm phải cho thấy thực tế nha bạn
I thought they wanted to make two motorcycles mate and then have a small motorcycle. 0:37
Another reason why you should rather buy a new Motorbike in those contries when you want to travel there on Holiday by motorbike. In no scenario I would want to drive around with a wheel like that!Too risky!