That was an excellent video. As of today, I ordered another brush motor & gearbox for a Shark RV750N robot sweeper (gears were stuck). You know, the RH wheel assemblies for that particular Shark model are getting virtually impossible to find now.
Thanks for this video! We had a suction loss fault code. Turned out there was just a little hard bit stuck in the suction unit. Took about 40 minutes start to finish. 🤘🏼
Mine ran over some dog poo... took it all apart and cleaned it. Forgot how it went back together but thanks to this video I got it back together and it's now on the charger! Only problem is I have quite a few screws that I don't know where they went haha
My robot Betty keeps attempting suicide by running off the second story balcony. I think she may have finally succeeded. Hoping this video may help me determine what broke.
i opened up my 251 shark robot vacuum and a1-1/2" heavy chrome cylinder with a little foam pad on top fell out Where does it go back into? this is a grear series for the DIy!!
Where is the dustbin sensor on an AV2510 series? I took my robot apart and put it back together but it’s throwing a dust bin not installed error. I’m wondering if I misplaced the sensor, but I can’t see anywhere on the dustbin or on its space where a sensor could be
Sounds like that is a different model board. It might work but there is a good chance it will have errors depending on what that port connection is for.
I have the Rv1101arus model and took it apart your video was great and very helpful. Trying to put it together and i have a metal weight that i have no idea where it came from. Any idea?
Howdy sir, I have a shark RV754R01US, it cleans for two minutes or less before stopping with a flashing blue max light, I followed your disassembly, and cleaned the contacts for the front bumper with isopropyl. No change, I just thought you might have a suggestion for me to help track down the issue. Thanks for making the vid.
My daughters Shark Ion Robot Vacuum AV752 is making a growling noise when it runs. I watched your video and I think it is repairable. My Google search for replacement parts yielded very little for parts. Only the more common parts: brushes, roller brush etc. I am thinking the noise is coming from inside one of the drive wheel assemblies. Can you recommend a supplier for replacement parts and contact information. Your video was really helpful.
Hey, I’ve got a RV990 and for the life of me cannot figure out how to remove the cover from the robot. I know you counted out 5 screws, I can only find 4…. My vacuum doesn’t have the one in the brush roll but it won’t budge like there’s still another screw
Good video. I bought at $40 set of sensors on eBay and the solved my #7 cliff sensor error. Had to snip some plastic to get the side sensors in. Better be a patient excellent dyi to accomplish.
Have a shark self empty and it gives me an error 6. Says bumper stuck. I've taken it apart cleaned and checked the springs. Everything looks ok and very clean, but still get the error code. What to do next?
How do you remove the front caster from its holder. I saw that you removed just the caster,but the Piece that holds the caster is broke and need help getting it out.
Hi,Broke Pin When Taking Out Battery From My Shark RV2001 VacMop And Wondering If You Think It Can Be Repaired Or Do I Have To Replace Motherboard, Very Frustrating And Shark Does Not Sell Motherboard, Any Help Would Be Appreciated.
Oh no sorry to hear, if you have to skills you can attach some wire where the pin went and just attach the battery with different terminals. If thats not possible sadly a new motherboard is the only option.
@@SmittysWorld Thanks Smitty,I Was Thinking Of Tearing The Vac Down To Get At The Motherboard And Maybe Solder Another Pin But Was Told Can't Happen And That Brings Me To You Wise One,Is It Possible If Pin Snapped Off At The Motherboard? Cheers
@@SmittysWorld Thanks My Friend, I'm Going To Rewatch Your Video To Make Sure I Keep It Organized When I Tear The Vacmop Apart To Get At Motherboard And Hoping I Can Consult With You If Needed, Thanks For Your Support. Cheers
Good afternoon! I have a Shark Iron Robot 720 and I tried to fix it but it was impossible. When we press the clean button, the Spot light flashes few seconds later. I live in Brazil and I don't know what to do. We opened the robot following your video instructions and every single part is totally clean. What do you suggest?
I purchased the shark AI Robot. It was working for about two weeks. The battery is getting drained by the charger. I purchased a new battery and it drained the new battery while it’s charging. I know it’s charging because the charging unit led changes from green to blue.
shame that shark doesn't sell more replacement parts. This great video illustrates the point that if you don't know a repair person that has the part your options are 1. TOSS IT, 2. Buy another-with same potential. Cheap low quality plastic saved shark 3 cents per part vs your hundreds invested..
I have a RV20011 that keeps draining the battery. I have 19.9 v on the base . I can manually charge a new battery to 14.4v but it drains the battery overnight. Any ideas?
Hi Smitty, I Managed To Finally Find A Electronic Guy That Soldered A Couple Of Wires Where The Pins Were But I Messed Up And Didn't Take Pictures Before Taking The Wire Clips Off The motherboard And Did Put Them Back On But Not Sure And Wondering If I Could Send You A Couple Of pics To Get Your Opinion? Man It Would Be Appreciated.
All your videos are very informative as far as they go and i have learned a lot. Only issue for me is that on my rv750 i need to replace the cliff sensors and have not seen a single video from anyone on how to remove and replace these. If you have one i have not seen, please let me know. I got some sensors that said non n type, but they were not correct. I would like to get some if you have them for sale and see how to replace. Thanks, Bryan
I grabbed a 700 the other day and was fooling around with it. It will move about a foot then stop. Not seeing any errors, just a beep every few seconds. You can push clean again and it will move about another foot and stop. Any ideas?
Wow you sure know what you're doing! I learned a lot from you,thanks.A few days ago my shark gave this message" please check under robot for an obstruction" So far I cleaned the brush roll and compartment and today pulled the housing where the filter is located on front of vaccum.And turned the unit off and on again.Still not working. What do you think the issue is? Vacuum is 4 month old.
I took my share apart to clean it. Put it back together and now it won’t turn on. I am assuming it’s a power connection somewhere. Where show I start looking?
I I was hoping you might show what sensors let the shark know that the Dustbin is engaged, I can find no sensors or switches or anything for that matter that might let the shark determine that the Dustbin is put in place. And I can't get the air to clear and obviously the shark doesn't work the shark doesn't work with the error active
Guess roller brush gears tend to misalign and apparently melt , ,high stress parts made out of plastic instead of metal , , ,🤔 almost guarantees product failure , , , ,
I finally got the correct brush mower. Before I put it back together I can’t remember what the 5 silver colored screws came from and another set of 2 of them.
@SmittysWorld Any ideas why the app won’t connect anymore? I have an AV752. I go through all the steps of deleting the robot from the app, turn off/on, reconnect successfully, but then it shows up as “disconnected” and won’t let me program it. It used to work fine until I got a new WiFi router. Any ideas?
That was an excellent video. As of today, I ordered another brush motor & gearbox for a Shark RV750N robot sweeper (gears were stuck). You know, the RH wheel assemblies for that particular Shark model are getting virtually impossible to find now.
Thanks for this video! We had a suction loss fault code. Turned out there was just a little hard bit stuck in the suction unit. Took about 40 minutes start to finish. 🤘🏼
Awesome video. Helped me replace my vacuum motor and main brush motor. You saved me hundreds of dollars. Keep up the great work!
Mine ran over some dog poo... took it all apart and cleaned it. Forgot how it went back together but thanks to this video I got it back together and it's now on the charger! Only problem is I have quite a few screws that I don't know where they went haha
My robot Betty keeps attempting suicide by running off the second story balcony. I think she may have finally succeeded. Hoping this video may help me determine what broke.
i opened up my 251 shark robot vacuum and a1-1/2" heavy chrome cylinder with a little foam pad on top fell out Where does it go back into? this is a grear series for the DIy!!
RV1001 completed repair of code 7. Thanks to your video,
Where is the dustbin sensor on an AV2510 series? I took my robot apart and put it back together but it’s throwing a dust bin not installed error. I’m wondering if I misplaced the sensor, but I can’t see anywhere on the dustbin or on its space where a sensor could be
trying to replace motherboard for Shark RV1001-AE, on new boar there is an extra plug port at top to right of middle will this work on mine?
Sounds like that is a different model board. It might work but there is a good chance it will have errors depending on what that port connection is for.
Thanks man. Super helpful for my tear down today to replace the “cliff sensors”. Shit was wild.
Did you have to remove the motherboard first?
Can I replace the cliff sensors without removing the motherboard?
depends on the robot model and the sensor but most the time they are under it.
I have the Rv1101arus model and took it apart your video was great and very helpful. Trying to put it together and i have a metal weight that i have no idea where it came from. Any idea?
Any chance for a teardown video on the Shark AI model RV2520AOUS? I’ve taken apart and can’t get it back together. Thx.
No videos right now
@@SmittysWorld thx btw for all the good content. Any chance u can point me to any other content or info?
Howdy sir, I have a shark RV754R01US, it cleans for two minutes or less before stopping with a flashing blue max light, I followed your disassembly, and cleaned the contacts for the front bumper with isopropyl. No change, I just thought you might have a suggestion for me to help track down the issue. Thanks for making the vid.
My daughters Shark Ion Robot Vacuum AV752 is making a growling noise when it runs. I watched your video and I think it is repairable. My Google search for replacement parts yielded very little for parts. Only the more common parts: brushes, roller brush etc. I am thinking the noise is coming from inside one of the drive wheel assemblies. Can you recommend a supplier for replacement parts and contact information. Your video was really helpful.
Hey, I’ve got a RV990 and for the life of me cannot figure out how to remove the cover from the robot. I know you counted out 5 screws, I can only find 4…. My vacuum doesn’t have the one in the brush roll but it won’t budge like there’s still another screw
Every model is different. Make sure all the wheels screws are out , all the body screws are out and the front lip is removed.
😂😂😂😂
Good video. I bought at $40 set of sensors on eBay and the solved my #7 cliff sensor error. Had to snip some plastic to get the side sensors in. Better be a patient excellent dyi to accomplish.
Have a shark self empty and it gives me an error 6. Says bumper stuck. I've taken it apart cleaned and checked the springs. Everything looks ok and very clean, but still get the error code. What to do next?
How do you remove the front caster from its holder. I saw that you removed just the caster,but the Piece that holds the caster is broke and need help getting it out.
Hi,Broke Pin When Taking Out Battery From My Shark RV2001 VacMop And Wondering If You Think It Can Be Repaired Or Do I Have To Replace Motherboard, Very Frustrating And Shark Does Not Sell Motherboard, Any Help Would Be Appreciated.
Oh no sorry to hear, if you have to skills you can attach some wire where the pin went and just attach the battery with different terminals. If thats not possible sadly a new motherboard is the only option.
@@SmittysWorld Thanks Smitty,I Was Thinking Of Tearing The Vac Down To Get At The Motherboard And Maybe Solder Another Pin But Was Told Can't Happen And That Brings Me To You Wise One,Is It Possible If Pin Snapped Off At The Motherboard? Cheers
@@Roaddog22 if you remove the motherboard you could solder some new pins or even some wire connectors to make it work
@@SmittysWorld Thanks My Friend, I'm Going To Rewatch Your Video To Make Sure I Keep It Organized When I Tear The Vacmop Apart To Get At Motherboard And Hoping I Can Consult With You If Needed, Thanks For Your Support.
Cheers
Good afternoon!
I have a Shark Iron Robot 720 and I tried to fix it but it was impossible. When we press the clean button, the Spot light flashes few seconds later. I live in Brazil and I don't know what to do. We opened the robot following your video instructions and every single part is totally clean. What do you suggest?
Can you tell me where to get a pioneer 132-2m for my vacuum model RV754R01US please?I can't find it anywhere.
get what?
@SmittysWorld Sorry, it is the belt or the whole belt and gear set housing . Like the one that melted and you replaced in the video.
Brush motor is slipping either gears or the belt. Where can I get replacement parts and a parts diagram
I purchased the shark AI Robot. It was working for about two weeks. The battery is getting drained by the charger. I purchased a new battery and it drained the new battery while it’s charging. I know it’s charging because the charging unit led changes from green to blue.
shame that shark doesn't sell more replacement parts. This great video illustrates the point that if you don't know a repair person that has the part your options are 1. TOSS IT, 2. Buy another-with same potential. Cheap low quality plastic saved shark 3 cents per part vs your hundreds invested..
Where can i purchase a wheel, not the small one in front but one of the large wheels, for RV1101ARUS? The Shark website doest have them?
Have you tried eBay?
Awesome! Thanks!! 👏🏼👏🏼👏🏼
I have a shark RV750 I am looking for a bearing and a belt. I am having problems finding a place to order from,, Any suggestions? Thanks
Ebay will be the only place you can get those parts and when you say bearing what are you referring to? the brush bearing?
@@SmittysWorld yup. the brush bearing. I didn't take it apart yet. Would you recommend replacing the motor also ?
I have a RV20011 that keeps draining the battery. I have 19.9 v on the base . I can manually charge a new battery to 14.4v but it drains the battery overnight. Any ideas?
I have the same issue, did you ever find the solution?
@@ronaldallanperez3064 Hell no! Rosie found the bottom of the trash can. Too bad, I really like the vacuum.
Hi Smitty, I Managed To Finally Find A Electronic Guy That Soldered A Couple Of Wires Where The Pins Were But I Messed Up And Didn't Take Pictures Before Taking The Wire Clips Off The motherboard And Did Put Them Back On But Not Sure And Wondering If I Could Send You A Couple Of pics To Get Your Opinion? Man It Would Be Appreciated.
All your videos are very informative as far as they go and i have learned a lot. Only issue for me is that on my rv750 i need to replace the cliff sensors and have not seen a single video from anyone on how to remove and replace these. If you have one i have not seen, please let me know. I got some sensors that said non n type, but they were not correct. I would like to get some if you have them for sale and see how to replace. Thanks, Bryan
I grabbed a 700 the other day and was fooling around with it. It will move about a foot then stop. Not seeing any errors, just a beep every few seconds. You can push clean again and it will move about another foot and stop. Any ideas?
Hmm 🧐 I would take it part give it a good cleaning could be something causing it to get stuck inside. Maybe a motor going bad and heating up even.
This same thing is happening to me. Did you ever solve it? I've cleaned every part of the main brush, but the brush motor isn't moving very smoothly.
Good work
Do you have a shark ion robot rv750 dirt cup? If so what is the price for it and shipping fee?
Wow you sure know what you're doing! I learned a lot from you,thanks.A few days ago my shark gave this message" please check under robot for an obstruction"
So far I cleaned the brush roll and compartment and today pulled the housing where the filter is located on front of vaccum.And turned the unit off and on again.Still not working.
What do you think the issue is? Vacuum is 4 month old.
What model
I took my share apart to clean it. Put it back together and now it won’t turn on. I am assuming it’s a power connection somewhere. Where show I start looking?
I have the same issue. Checked every wire to some pictures I took before hand. Any thoughts?
I I was hoping you might show what sensors let the shark know that the Dustbin is engaged, I can find no sensors or switches or anything for that matter that might let the shark determine that the Dustbin is put in place. And I can't get the air to clear and obviously the shark doesn't work the shark doesn't work with the error active
I have a shark RV 1001 AE
Guess roller brush gears tend to misalign and apparently melt , ,high stress parts made out of plastic instead of metal , , ,🤔 almost guarantees product failure , , , ,
The shark has a ecm brushless dc motor.
I finally got the correct brush mower. Before I put it back together I can’t remember what the 5 silver colored screws came from and another set of 2 of them.
Places that have silver screws , main brush motor , side spinner motors , mother board , suction motor all those have screws like that
It's A Shark RV 2100
I need front wheel. New puppy
front wheel can be removed and cleaned. Unless you mean it was eaten lol
Looks to me heart surgery 😂
Oh come on its not that bad
@SmittysWorld Any ideas why the app won’t connect anymore? I have an AV752. I go through all the steps of deleting the robot from the app, turn off/on, reconnect successfully, but then it shows up as “disconnected” and won’t let me program it. It used to work fine until I got a new WiFi router. Any ideas?