If you haven't got a Trezor T and want to take the plunge, buy one and help me out at the same time with the link here: shop.trezor.io/product/trezor-model-t?offer_id=14&aff_id=2922&source=UA-cam Alternatively, keep all your crypto safe & upgrade to a Ledger Nano X Hardware Wallet shop.ledger.com/pages/ledger-nano-x?r=5243ecbb8427
i have a Trezor model T.. Trezor is DANGEROUS as instructions are incomplete and trezor suite is apt to loose tokens especially after firmware update. ZERO tech support isnt a plus either.. Ledger is much safer to not loose crypto. Any cold wallet should used with front end hot wallets like metamask to REDUCE risk.
It's actually fine and this is just user error... (Unless you have an actual, reproducible bug) If you have a typo in your seed or passphrase, you will have this same issue on a Ledger. (Though Ledger initial seed verification step is far more robust than what you find on a Trezor, especially given the 12 word seed on the Trezor T)
@@CryptoGuide ledger is safer, cleaner and has better customer service responses trezor is only ok with hot wallet as front end wallet for tokens.. I think newer people getting in need more technical support and less commissioned sales focus ..
@@CryptoGuide Hello, what should I do...I'm on the first step. Got it connected but I'm stuck. I have a message that says "Device detected in incorrect state "
After 10 days of non response from Satoshi labs I found you and voila, RECOVERED. Quite easy thanks to you. The secret was the swipe a micro second before plug in part. Big Thanks Crypto Guide!!
For those having problems with the swipe - make sure to swipe AND leave your finger on the screen. I was swiping and lifting my finger and it wasn't working.
I tried doing a seed check recovery and I could not work out how the hell you used the on screed letters, thank you for this I’m feeling confident that I can do it now. Also pleased to hear others have struggled with it, it needs a better way, Ledgers is better IMO.
I have the trezor with the buttons instead of the touch screen. Does that software page work with it? I can't find where to wipe my wallet. All the pages I can connect it to do not have that option. (It has an incorrect seed word so I have to start over. )
hi is it the same for the trezor one? i want to wiped uot my trezor one but i have axies slp axs in my trezor and i cant access my trezor please help thank you
great vid! can you do a recovery on a trezor that has crypto on it ? i own a trezor model T and have crypto on it. I have never done a recovery on the unit and would like to but would like to know if I should transfer the crypto off the unit first and then proceed with the test recovery? cheers.
Thanks for the video. I'm confused. My Trezor Model T came with 12 seed words. I want to use 12 of my own making. Can you explain how to do this? Thanks, Dr. Marc
Firstly, chosing your own words is generally a bad idea as humans are terrible at randomness. Secondly, BIP39 recovery seeds like the Trezor uses both use words from a set list and have a checksum that dictates what the last word must be depending on the rest of the words. Trezor devices don't support generating the checksum word, so you can't easily pick the first 11 unless you are prepared to randomly pick the final word BIP39 words until you find one that is valid. (This will take 16 tries on average for an 12 word seed)
Just watch my video on Binance chains. Most of it applies to the Trezor T, except you just need to use Metamask for BEP20/ERC20 and use Binance.org for the BEP2 stuff.
Hey man! Great video. I received my second Trezor Model T hard wallet for my NFT collection. When I plugged it in, it said "something seems off... please contact support." Although there were no signs of "tampering," I did and then proceeded to wipe the device as you showed above and then created a new wallet (since I hadn't connected to metamask yet.) Am I safe to connect to metamask now or should I just get a new Model T?
Firstly, you might want to check that it will be compatible before sending NFTs to a Trezor T, as I'm pretty sure the firmware doesn't yet support signing transactions sending them out... Secondly, are you saying that the device came pre-configured with a seed? Trezor Suite can be a bit fiddley at the moment in terms of the device being in the wrong state.
Didn't work for me,.. managed to get the screen you show when connecting the cable, but it will not show me the next... it's still pairing as before..weired.
I don't get it, is this a bitcoin wallet? If it's a wallet and it is reset then where is the bitcoins? If this is not a wallet then what is it good for?
Yes it's a Bitcoin wallet. When you reset it, you can either generate a new seed (which will contain no funds) or restore a seed that you had previously used to store funds. The wallet is useful because it lets you securely generate, store and use private keys. (Represented as a seed phrase)
Hello, I just want to make sure before I start. You stated that this will work if I lost my pin, correct? In the vid I just didn't hear you say, this is where a new pin is created
You can just use Electrum to initialize it with a 24 word seed. Safety check level and other Trezor CTL stuff is covered in my video on recovering LTC sent to a BTC address.
If I reset my trezor and restore normally all wallets connected to it like yoroi and metamask will they recognize the wallet as before reset? or would it be better if I transfer the adas to another wallet before the reset?
If you restore the same seed back on, as far as all these software interfaces for, nothing has changed and they will "just work" with it as they did before.
Hi, can you advise if I can use the same Seed Phrase that already exists on my Trezor One and use it on my brand new Model 'T' which I plan to use instead?
Do you mean the recovery seed of that passphrase? Basically resetting it will give you new recovery seed or allow you to reinitialise it with your existing one. (If you forgot the PIN) Do you have existing funds in the wallet? If so, then these are associated with your current seed+passphrase and you will need to work out what the passphrase you used was.
I have a Trezor model T, and I still can access it with the passcode. However, I lost the seed phrase. Is there a way to generate a new seed phrase? Im nervous since it still works, but I would feel safer if I could wipe it and start with a new seed phrase.
There is no way to get the seed again and it's unsafe to run without a backup. The best course of action is to send all funds off the wallet, wipe it, then reinitialize with a new seed.
You just need to factory reset the device, but need to move all funds off if before doing so. (As any funds still associated with the old seed will be unrecoverable)
Hello sir. Found your yesterday watched video on seed recovery quite brilliant, so came for more today. But this one did not help me out of trouble. Thing is, recently my old PC crashed, with all the apps in it. Have had to reinstall crypto online wallets and Trezor Suite app as well. Well, I seem to have forgotten the "account name" (I had two on my Trezor T, with one seed phrase). The one that the Trezor shows me is "empty". That would have been a bad dream. I assume the priv keys are still "somewhere on the device". What do I do? I have the seed and passphrase right, but the Trezor is telling me it is empty. Thank you
If the seed is giving you different addresses then you likely have a typo in your seed. The only other thing to check first is Trezor Suite, as it will display some account types which won't be displayed correctly in other wallets. (Like Exodus, wallet.trezor.io etc)
@@CryptoGuide Hello ..... (sorry I cannot address you by name - I don´t think I heard it in the videos :( Well, thank you for trying to decode the issue for me, but if this is your break-down, then it won´t help. I´m hundred percent sure the seed is correct. triple checked it at creation and was very sure about it. also the passphrase I have used multiple times when sending out or restaking, so that one is also correct. hmmmm. well, I´m gonna have months to try getting back to what was meant to be my ´pension plan´ since 2017. Anyway, thank you, ..... For your time! Regards from Jan
If you are getting the wrong address then it's going to be related to am issue in your seed or passphrase... Unless you have deliberately used a non-standard derivation path via something like Electrum.
Hi, I hope all is well. I recently purchased the Trezor Model T and I need to give it to some people that I was part of a mining pool with so they can transfer my crypto to it. My plan is to transfer the crypto once added to my Trezor to another wallet, and then do a factory reset on the device to ensure I only have access to the Trezor. From there I would then send back the crypto to the newly wiped device. May I ask if I'm approaching the situation correctly?
Why are you giving the Trezor to anyone else at all? This isn't ever required and sounds super dodgy... When mining, you just give a single address to the pool, that is all.
@@CryptoGuide Thank you for the input! I've been trying to read up on it because it seemed strange to me as well but now I know for certain that it's not needed. This is just what I needed to hear because I kept on being told that it needs to be plugged in and unlocked in order to receive the funding, along with the occasional crypto terminology which from my reading didn't add up. I believed these people to be "trustworthy" and you may have saved me from a bad mistake. Many thanks and good health!!!
Guide here ua-cam.com/video/SzQ1BxcXr0s/v-deo.html Just be aware that if you wipe without your backup, you permanently lose access to all the funds you had stored there
I am currently living in Indonesia and want to know if you how I can make sure when I buy one here, on a local Indonesian online store, that it hasn’t been compromised ?
Hello I have a trezor T and I will need to reset it, but I have a wallet in yoroi and inside that wallet I created another one connected to trezor, when I reset it will all web wallets recognize my trezor after recovery?
If you restore the same seed back on, as far as all these software interfaces for, nothing has changed and they will "just work" with it as they did before.
@@CryptoGuide My new trezor has just arrived and is having a problem with the display, dead pixel the support asked to reset it in an attempt to fix this failure and I was told that this will not interfere with the use if it continues
question - did you use a " hidden wallet" on your trezor? I heard too late it is a VERY BAD idea as Trezor has NOT perfected the tech yet after firmware recovery. .. have you successfully recovered a wallet with crypto in its hidden wallet successfully?
There is nothing wrong with hidden wallet an it works perfectly fine after recovery. I have recovery *many* wallets with passphrase enabled, no problem whatsoever...
How can I recover accounts on my KeepKey using my KeepKey seed on my new Trezor Model T? The old KeepKey will not show my BTC legacy coins as it isn’t compatible with BIP44, so rather than use a software wallet like the Coinomi you gave a video on, I was told that somehow that could be done on my new Trezor that’s been setup, but has coins on it yet. Can you help on this?
What makes you think the Keepkey isn't compatible with legacy Bitcoin accounts and BIP44. (It certainly is) In terms of Trezor, you can just stick the seed from a Keepkey straight in to a Trezor T and it will "just work"
@@CryptoGuide Thank you for your comment. I did put my seed into another KeepKey and no coin showed up. Tech at ShapeShift said to input my old accounts manually, which I don’t know how to do. KeepKey and ShapeShift is difficult, so I’m hoping to resolve it all by moving to Trezor, God willing! I think I know how to do that now, and hope it works.
A Trezor T is unlikely to give any different result than a Keepkey when it comes to detecting Bitcoin legacy accounts. If you still find nothing, it's possible you have a typo in your seed. (As Keepkey doesn't verify this at all as part of the onboarding process) If so, BTCRecover can likely make short work of it.
I am having trouble retrieving my wallet in Trezor T. I wiped my wallet but I had my recovery seed. Upon doing a factory reset I still couldn't retrieve my wallet - Trezor T says I must have set a passphrase. This was news to me as I could not recall setting a passphase. Then they said is you a using Metamask it sets the paraphrase by default - Now i am really stuck please HELP. I have my recovery seed + public key - will btc recovery help here?
I am confused - I have my public key and recovery phrase but Trezor tells me that using BTC recover will not help me recover my passphrase please help?
If someone gains access to my seed phrase on model T, and recovers it on another device, they will get into a regular wallet, but not the passphrase protected one. At this point, can they do a factory reset and generate a new seed and my passphrase protected wallet is gone/at risk? Also, can they brute force the passphrase if they have the seed? Thanks
I don't understand your first question, someone restoring your seed and wiping doesn't impact your wallet at all. BTCRecover supports brute-force recovery of BIP 39 passphrase, so it's short (5-6) characters or a common word/phrase them it can be easily brute-forced.
@@CryptoGuide If someone got my seed and restored it on another Trezor, but couldn't get into my passphrase protected wallet, can they do a factory reset/wipe, after restoring it, is that seed gone forever? Even if they did that, it would not affect MY Trezor wallet at all? I will still have access to my funds on my Trezor?
Watch my video on cloning hardware wallets as there are some key concepts that you need up understand... Basically every hardware device is totally independent, even if running the same seed. Unless you destroy the physical backup, you can restore it on as many devices as you like, wipe them, etc, and while things like sending funds from any one device will be automatically reflected in all of them, stuff like wiping, destroying devices, etc, will not do anything to either your other backups or the seed backup itself.
@@CryptoGuide yes.i wipe the device because of the update.then i follow the instructions. I choose the recovery wallet since i have already one with my funds.i wrote the 12 words .it confirms that i finish update and recovery.however. i found a new wallet without funds.and the former wallet is disconnected
First thing to check is that the if you use Trezor suite, the funds are still mjssing. If you weren't using a passphrase before (hidden wallets) just leave the passphrase field blank when prompted. It's also possible that you have a typo in your 12 word seed, in which case you will need to use BTCRecover.
@Crypto Guide My new Trezor Model T is great! And your video here save me X x 1MM. Thank you for your help and UA-cam video, which was very well presented. One more question, I still have remaining to recover Bitcoin Cash, which didn’t immediately show up on this recovery. It showed up after the hard fork in 2017. How do I recover that? It was in my Account #2 on my old KeepKey. And BTW, I followed basically the same process of recovery on my KeepKey, and all that showed up was two empty Accounts, with no coin!
Thanks. If the first account is empty for BCH then Trezor Suite might not be automatically discovering it. Your best bet would be to just use the Trezor T with Electron-Cash and add the account with your hardware wallet that way. (Electron-Cash will work directly with your Trezor, so no seed entry required) You may need to use the derivation path m/44'/0'/1' for the second account on the Keepkey. (If you didn't split it) m/44'/145'/1' if you did split it...
@@CryptoGuide thanks again, you’re very good at replying and that is much appreciated. It’s all working perfect now on my new Model T, with both BTC and BCH, all showing up. Trezor just has different tabs to access different coin. I really like Trezor, and I really like your presentations.
Put the Trezor T in bootloader mode, open Trezor Suite and then you will be offered an option to go in to device settings where you can do the factory reset
@@CryptoGuide Bootloader mode done but if I open Trezor Suite, it says "Device detected in incorrect state" and no option to go to device setting. It says This Trezor is in bootload mode and asks to reconnect your device.
Pls help… I try update firmware Trezor t…it didn’t go… then my Trezor T I plug again and want me to set up but I already have set up.what to do ?follow your step for recover seed? Then my Trezor is set up again with the exiting wallet? Plssss help 😩
Yea it may be that the update failed and wiped the device. You will basically just need to restore with your existing 12 word seed and all your funds will be there.
Hey Nancy, good to hear, feel free to shoot me a tip at www.reddit.com/user/Crypto-Guide/comments/czy13u/a_post_or_video_of_mine_was_helpful_feel_free_to/ :)
Hello I need help, how do I restore a hidden wallet?, because I already used the seed phrases but I can not connect the hidden wallet, I even used the same passphases and same tags and I still can't connect. I can see it because is registered at trezor suite but I can not connect
You just restore the seed as normal and then when prompted in Trezor suite, you select "hidden wallet" and enter your passphrase. When you say "I can't connect" what does this mean? Does it load up a bunch of empty accounts or are you getting an error message of some kind?
Hey J.M.メディナ ヘスス, good to hear, feel free to shoot me a tip at www.reddit.com/user/Crypto-Guide/comments/czy13u/a_post_or_video_of_mine_was_helpful_feel_free_to/ :)
You have a typo in your passphrase or your seed. I have recovered *many* wallets on Trezor devices, both with passphrase and without, never had a problem. Did you run the full recovery check to make sure your seed is correct?
If you are recovering and getting different addresses (So a bunch of accounts with no balance or transactions, check with Trezor suite) then you have a typo in your seed and will need to try BTCRecover.
That's what I'm trying to tell you... A different seed (or same seed with a typo) will generate different addresses, so if you are seeing a bunch of empty accounts then this can be why. Are you using a Trezor T or a Trezor One?
@@CryptoGuide You gave me the confidence to verify my passphrase and the underlying individual wallets enough to rely on it for coin transfer. This will be on a lot of folks' minds before that big day where they must get everything perfect. Thanks a million!
If you haven't got a Trezor T and want to take the plunge, buy one and help me out at the same time with the link here: shop.trezor.io/product/trezor-model-t?offer_id=14&aff_id=2922&source=UA-cam
Alternatively, keep all your crypto safe & upgrade to a Ledger Nano X Hardware Wallet shop.ledger.com/pages/ledger-nano-x?r=5243ecbb8427
i have a Trezor model T.. Trezor is DANGEROUS as instructions are incomplete and trezor suite is apt to loose tokens especially after firmware update. ZERO tech support isnt a plus either.. Ledger is much safer to not loose crypto. Any cold wallet should used with front end hot wallets like metamask to REDUCE risk.
It's actually fine and this is just user error... (Unless you have an actual, reproducible bug) If you have a typo in your seed or passphrase, you will have this same issue on a Ledger. (Though Ledger initial seed verification step is far more robust than what you find on a Trezor, especially given the 12 word seed on the Trezor T)
@@CryptoGuide ledger is safer, cleaner and has better customer service responses trezor is only ok with hot wallet as front end wallet for tokens.. I think newer people getting in need more technical support and less commissioned sales focus ..
@@CryptoGuide Hello, what should I do...I'm on the first step. Got it connected but I'm stuck. I have a message that says "Device detected in incorrect state "
.
The best Trezor tutorial I’ve seen. Great job
Thanks, Glad you found it helpful :)
After 10 days of non response from Satoshi labs I found you and voila, RECOVERED. Quite easy thanks to you. The secret was the swipe a micro second before plug in part. Big Thanks Crypto Guide!!
Glad it helped, yes the swipe is extremely frustrating...
For those having problems with the swipe - make sure to swipe AND leave your finger on the screen. I was swiping and lifting my finger and it wasn't working.
I haven't found that this is needed, but it certainly can be tricky to get right :)
I tried doing a seed check recovery and I could not work out how the hell you used the on screed letters, thank you for this I’m feeling confident that I can do it now.
Also pleased to hear others have struggled with it, it needs a better way, Ledgers is better IMO.
Yea it's certainly confusing, glad this clarified things :)
Hey buddy - thanks so much for this video, you made it super easy for me to complete, what was for - me a scary task! Cheers
Glad it helped!
Thanks goodness, I didn't understand how to select the letters and thought my seed was wrong and all my btc was gone.
Glad it helped, hood job sorting it out :)
So good ... gave us the confidence ;) ... Thank you!
Happy to help!
I have the trezor with the buttons instead of the touch screen. Does that software page work with it? I can't find where to wipe my wallet. All the pages I can connect it to do not have that option. (It has an incorrect seed word so I have to start over. )
The process for the Trezor One is here ua-cam.com/video/SzQ1BxcXr0s/v-deo.html
Thanks I do this!!
Glad it helped
hi is it the same for the trezor one?
i want to wiped uot my trezor one but i have axies slp axs in my trezor and i cant access my trezor please help thank you
It's a different video for Trezor One, but the process of restoring the seed is still straightforward.
great vid! can you do a recovery on a trezor that has crypto on it ? i own a trezor model T and have crypto on it. I have never done a recovery on the unit and would like to but would like to know if I should transfer the crypto off the unit first and then proceed with the test recovery?
cheers.
The dry run recovery can be run without risking any crypto on the device. (It doesn't wipe it or anything like that) :)
Thank you!
Glad it helped :)
Thanks for the video. I'm confused. My Trezor Model T came with 12 seed words. I want to use 12 of my own making. Can you explain how to do this? Thanks, Dr. Marc
Firstly, chosing your own words is generally a bad idea as humans are terrible at randomness. Secondly, BIP39 recovery seeds like the Trezor uses both use words from a set list and have a checksum that dictates what the last word must be depending on the rest of the words. Trezor devices don't support generating the checksum word, so you can't easily pick the first 11 unless you are prepared to randomly pick the final word BIP39 words until you find one that is valid. (This will take 16 tries on average for an 12 word seed)
Is there a way to "undo" the Factory Reset of a Trezor ? --> regaining the deleted memory of the Trezor itself?
Nope, though once you reinitialize it with your seed it will be back into the same state that it was before being reset.
Please make a detail video on how to transfer and store BUSD/ USDT/ USDC on Trezor wallet T using ERC 20/ BEP 20/ BEP 2
Just watch my video on Binance chains. Most of it applies to the Trezor T, except you just need to use Metamask for BEP20/ERC20 and use Binance.org for the BEP2 stuff.
Hi sir where can i find the recovery button. I cant find it
The process is basically the same in Trezor suite. Just put the device in recovery mode before you open Trezor Suite.
Hey man! Great video. I received my second Trezor Model T hard wallet for my NFT collection. When I plugged it in, it said "something seems off... please contact support." Although there were no signs of "tampering," I did and then proceeded to wipe the device as you showed above and then created a new wallet (since I hadn't connected to metamask yet.) Am I safe to connect to metamask now or should I just get a new Model T?
Firstly, you might want to check that it will be compatible before sending NFTs to a Trezor T, as I'm pretty sure the firmware doesn't yet support signing transactions sending them out...
Secondly, are you saying that the device came pre-configured with a seed? Trezor Suite can be a bit fiddley at the moment in terms of the device being in the wrong state.
Didn't work for me,.. managed to get the screen you show when connecting the cable, but it will not show me the next... it's still pairing as before..weired.
What didn't work for you? What are you trying to achieve?
I don't get it, is this a bitcoin wallet? If it's a wallet and it is reset then where is the bitcoins? If this is not a wallet then what is it good for?
Yes it's a Bitcoin wallet. When you reset it, you can either generate a new seed (which will contain no funds) or restore a seed that you had previously used to store funds.
The wallet is useful because it lets you securely generate, store and use private keys. (Represented as a seed phrase)
Hello,
I just want to make sure before I start. You stated that this will work if I lost my pin, correct? In the vid I just didn't hear you say, this is where a new pin is created
You can wipe the device without the PIN. You then just set a new pin after you have restored your seed.
Thanks 👍🏾
.
Do you have a video setting up 24 seeds and the safety check level too strict ?
You can just use Electrum to initialize it with a 24 word seed. Safety check level and other Trezor CTL stuff is covered in my video on recovering LTC sent to a BTC address.
If I reset my trezor and restore normally all wallets connected to it like yoroi and metamask will they recognize the wallet as before reset? or would it be better if I transfer the adas to another wallet before the reset?
If you restore the same seed back on, as far as all these software interfaces for, nothing has changed and they will "just work" with it as they did before.
hi good morning i have trezor one i have my seed phrase if i wipe my trezor one and do recover all the same ronin account on my back up will appear?
If you have a working backup and wipe/restored, everything will work fine as it did before.
Did you do a full review on the Model-T? Can't find it.
I never actually did one beyond the feature comparison on my website here cryptoguide.tips/hardware-wallet-comparisons/
Hi, can you advise if I can use the same Seed Phrase that already exists on my Trezor One and use it on my brand new Model 'T' which I plan to use instead?
Yep, just restore the seed from your Trezor One on to your Trezor T and it will "just work". You can even have it on both at the same time.
Thank you. I have done the reset - but I still cannot get the send button to work. I can receive coins however??
Which wallet software are you using?
is it safe to factory reset your device when you actually forgot the passphrase?
Do you mean the recovery seed of that passphrase? Basically resetting it will give you new recovery seed or allow you to reinitialise it with your existing one. (If you forgot the PIN)
Do you have existing funds in the wallet? If so, then these are associated with your current seed+passphrase and you will need to work out what the passphrase you used was.
I have a Trezor model T, and I still can access it with the passcode. However, I lost the seed phrase. Is there a way to generate a new seed phrase? Im nervous since it still works, but I would feel safer if I could wipe it and start with a new seed phrase.
There is no way to get the seed again and it's unsafe to run without a backup.
The best course of action is to send all funds off the wallet, wipe it, then reinitialize with a new seed.
@@CryptoGuideYes, im not trying to recover old seed phrase. Im looking for a way to generate a new seed phrase.
You just need to factory reset the device, but need to move all funds off if before doing so. (As any funds still associated with the old seed will be unrecoverable)
Hello sir. Found your yesterday watched video on seed recovery quite brilliant, so came for more today. But this one did not help me out of trouble. Thing is, recently my old PC crashed, with all the apps in it. Have had to reinstall crypto online wallets and Trezor Suite app as well. Well, I seem to have forgotten the "account name" (I had two on my Trezor T, with one seed phrase). The one that the Trezor shows me is "empty". That would have been a bad dream. I assume the priv keys are still "somewhere on the device". What do I do? I have the seed and passphrase right, but the Trezor is telling me it is empty. Thank you
If the seed is giving you different addresses then you likely have a typo in your seed. The only other thing to check first is Trezor Suite, as it will display some account types which won't be displayed correctly in other wallets. (Like Exodus, wallet.trezor.io etc)
If it isn't discovering the correct accounts then this is because of an issue with either your seed or passphrase. (Likely using the wrong one)
@@CryptoGuide Hello ..... (sorry I cannot address you by name - I don´t think I heard it in the videos :( Well, thank you for trying to decode the issue for me, but if this is your break-down, then it won´t help. I´m hundred percent sure the seed is correct. triple checked it at creation and was very sure about it. also the passphrase I have used multiple times when sending out or restaking, so that one is also correct. hmmmm. well, I´m gonna have months to try getting back to what was meant to be my ´pension plan´ since 2017. Anyway, thank you, ..... For your time! Regards from Jan
If you are getting the wrong address then it's going to be related to am issue in your seed or passphrase... Unless you have deliberately used a non-standard derivation path via something like Electrum.
Hi, I hope all is well. I recently purchased the Trezor Model T and I need to give it to some people that I was part of a mining pool with so they can transfer my crypto to it. My plan is to transfer the crypto once added to my Trezor to another wallet, and then do a factory reset on the device to ensure I only have access to the Trezor. From there I would then send back the crypto to the newly wiped device. May I ask if I'm approaching the situation correctly?
Why are you giving the Trezor to anyone else at all? This isn't ever required and sounds super dodgy... When mining, you just give a single address to the pool, that is all.
@@CryptoGuide Thank you for the input! I've been trying to read up on it because it seemed strange to me as well but now I know for certain that it's not needed. This is just what I needed to hear because I kept on being told that it needs to be plugged in and unlocked in order to receive the funding, along with the occasional crypto terminology which from my reading didn't add up. I believed these people to be "trustworthy" and you may have saved me from a bad mistake. Many thanks and good health!!!
.
Hi my terzor disconnected when i was writing the 12 words...and backup failed...now i cant do nothing, need some help please!
If you haven't deposited any funds on to it, just wipe it and reinitialise with a new seed.
I started using the new trezor suite but in the coins list it does not have cardano ,
You will need to use Adalite or Yoroi wallets to use your Trezor T with Cardano.
Hi there.I have a trezor one and lost my password and phrases. Do you have any info on how to reset? Thank you
Guide here ua-cam.com/video/SzQ1BxcXr0s/v-deo.html
Just be aware that if you wipe without your backup, you permanently lose access to all the funds you had stored there
I am currently living in Indonesia and want to know if you how I can make sure when I buy one here, on a local Indonesian online store, that it hasn’t been compromised ?
Have you tried buying it directly from the Trezor store? bit.ly/37mYr6x It does look like they ship to Indonesia :)
Crypto Guide you canyes it is just really hard w tax. Can take a loooong time to receive
.
hi I lost my pin and cannot access to the trezor page at all
Just follow the docco on the Trezor wiki
Hi , i need to know abt trezor . I lost my private key . Now i dont know how to restore it . Can u help me ?
Do you still have access to the Trezor and accounts that the seed was associated with?
Can you change the seed phrase if you only have the wallet and password?
You can't change your seed phrase, you will need up move the funds off the device and then reinitialise it with a new seed.
Hello I have a trezor T and I will need to reset it, but I have a wallet in yoroi and inside that wallet I created another one connected to trezor, when I reset it will all web wallets recognize my trezor after recovery?
If you restore the same seed back on, as far as all these software interfaces for, nothing has changed and they will "just work" with it as they did before.
@@CryptoGuide nice thank you very much
@@CryptoGuide My new trezor has just arrived and is having a problem with the display, dead pixel the support asked to reset it in an attempt to fix this failure and I was told that this will not interfere with the use if it continues
question - did you use a " hidden wallet" on your trezor? I heard too late it is a VERY BAD idea as Trezor has NOT perfected the tech yet after firmware recovery. .. have you successfully recovered a wallet with crypto in its hidden wallet successfully?
There is nothing wrong with hidden wallet an it works perfectly fine after recovery. I have recovery *many* wallets with passphrase enabled, no problem whatsoever...
How can I recover accounts on my KeepKey using my KeepKey seed on my new Trezor Model T? The old KeepKey will not show my BTC legacy coins as it isn’t compatible with BIP44, so rather than use a software wallet like the Coinomi you gave a video on, I was told that somehow that could be done on my new Trezor that’s been setup, but has coins on it yet. Can you help on this?
What makes you think the Keepkey isn't compatible with legacy Bitcoin accounts and BIP44. (It certainly is)
In terms of Trezor, you can just stick the seed from a Keepkey straight in to a Trezor T and it will "just work"
@@CryptoGuide Thank you for your comment. I did put my seed into another KeepKey and no coin showed up. Tech at ShapeShift said to input my old accounts manually, which I don’t know how to do. KeepKey and ShapeShift is difficult, so I’m hoping to resolve it all by moving to Trezor, God willing! I think I know how to do that now, and hope it works.
A Trezor T is unlikely to give any different result than a Keepkey when it comes to detecting Bitcoin legacy accounts. If you still find nothing, it's possible you have a typo in your seed. (As Keepkey doesn't verify this at all as part of the onboarding process) If so, BTCRecover can likely make short work of it.
Hey CG! Is it possible to recover a lost seed phrase if you still remember your PIN and Passphrase?
Unfortunately no, these are both useless without either the seed phrase or a working wallet that was initialised with the seed phrase.
I appreciate the response man!
@@CryptoGuide hi cg what will happen to the assets that in my trezor when i forgot the seed phrase.. Can i still transfer it at other trezor
.
Sir how can i recover recovery seed phrase of my tresor.
How many of the seed words do you have?
I am having trouble retrieving my wallet in Trezor T. I wiped my wallet but I had my recovery seed. Upon doing a factory reset I still couldn't retrieve my wallet - Trezor T says I must have set a passphrase. This was news to me as I could not recall setting a passphase. Then they said is you a using Metamask it sets the paraphrase by default - Now i am really stuck please HELP. I have my recovery seed + public key - will btc recovery help here?
You will need to use something like BTCRecover to attempt to recover your passphrase
I am confused - I have my public key and recovery phrase but Trezor tells me that using BTC recover will not help me recover my passphrase please help?
You will need some idea of what passphrase you might have used, but BTCRecover supports both seed and passphrase recovery.
If someone gains access to my seed phrase on model T, and recovers it on another device, they will get into a regular wallet, but not the passphrase protected one. At this point, can they do a factory reset and generate a new seed and my passphrase protected wallet is gone/at risk?
Also, can they brute force the passphrase if they have the seed? Thanks
I don't understand your first question, someone restoring your seed and wiping doesn't impact your wallet at all.
BTCRecover supports brute-force recovery of BIP 39 passphrase, so it's short (5-6) characters or a common word/phrase them it can be easily brute-forced.
@@CryptoGuide If someone got my seed and restored it on another Trezor, but couldn't get into my passphrase protected wallet, can they do a factory reset/wipe, after restoring it, is that seed gone forever? Even if they did that, it would not affect MY Trezor wallet at all? I will still have access to my funds on my Trezor?
Watch my video on cloning hardware wallets as there are some key concepts that you need up understand... Basically every hardware device is totally independent, even if running the same seed. Unless you destroy the physical backup, you can restore it on as many devices as you like, wipe them, etc, and while things like sending funds from any one device will be automatically reflected in all of them, stuff like wiping, destroying devices, etc, will not do anything to either your other backups or the seed backup itself.
@@CryptoGuide That answers my question, thanks!
.
Hi.i updated the firmware.then i found myself with new wallet while mine is disconnected completely with my funds.please help me
Were you using a BIP 39 passphrase before? (And is it prompting you for one now) Did you wipe/restore the device as part of the update?
@@CryptoGuide yes.i wipe the device because of the update.then i follow the instructions. I choose the recovery wallet since i have already one with my funds.i wrote the 12 words .it confirms that i finish update and recovery.however. i found a new wallet without funds.and the former wallet is disconnected
First thing to check is that the if you use Trezor suite, the funds are still mjssing. If you weren't using a passphrase before (hidden wallets) just leave the passphrase field blank when prompted. It's also possible that you have a typo in your 12 word seed, in which case you will need to use BTCRecover.
@Crypto Guide My new Trezor Model T is great! And your video here save me X x 1MM. Thank you for your help and UA-cam video, which was very well presented.
One more question, I still have remaining to recover Bitcoin Cash, which didn’t immediately show up on this recovery. It showed up after the hard fork in 2017. How do I recover that? It was in my Account #2 on my old KeepKey.
And BTW, I followed basically the same process of recovery on my KeepKey, and all that showed up was two empty Accounts, with no coin!
Thanks.
If the first account is empty for BCH then Trezor Suite might not be automatically discovering it.
Your best bet would be to just use the Trezor T with Electron-Cash and add the account with your hardware wallet that way. (Electron-Cash will work directly with your Trezor, so no seed entry required) You may need to use the derivation path m/44'/0'/1' for the second account on the Keepkey. (If you didn't split it) m/44'/145'/1' if you did split it...
@@CryptoGuide thanks again, you’re very good at replying and that is much appreciated. It’s all working perfect now on my new Model T, with both BTC and BCH, all showing up. Trezor just has different tabs to access different coin. I really like Trezor, and I really like your presentations.
Thanks, good to hear you got it sorted :
This video is not updated..I tried swiping then the page says that the device is detected in incorrect state and not connected
It needs to be updated again for Trezor suite, but the process of getting in to the bootloader hasn't changed.
@@CryptoGuide What should I do in Trezor Suite? it's not working T.T
Put the Trezor T in bootloader mode, open Trezor Suite and then you will be offered an option to go in to device settings where you can do the factory reset
@@CryptoGuide Bootloader mode done but if I open Trezor Suite, it says "Device detected in incorrect state" and no option to go to device setting. It says This Trezor is in bootload mode and asks to reconnect your device.
Try closing Trezor suite and opening it after the device is in bootloader. I tried it just now and it works fine
Pls help… I try update firmware Trezor t…it didn’t go… then my Trezor T I plug again and want me to set up but I already have set up.what to do ?follow your step for recover seed? Then my Trezor is set up again with the exiting wallet? Plssss help 😩
Yea it may be that the update failed and wiped the device. You will basically just need to restore with your existing 12 word seed and all your funds will be there.
@@CryptoGuide thank you so much 🙏 i just need to follow your step in this video? And my old Wallet should be good?
Yep. Just be sure that you only enter your seed in to the physical Trezor device itself, rather than any website, software, etc.
@@CryptoGuide thank you 🙏 your video saved me and you earn a follower.Keep up the good work 💕Thank you again 🙏💕
Hey Nancy, good to hear, feel free to shoot me a tip at www.reddit.com/user/Crypto-Guide/comments/czy13u/a_post_or_video_of_mine_was_helpful_feel_free_to/ :)
Hello I need help, how do I restore a hidden wallet?, because I already used the seed phrases but I can not connect the hidden wallet, I even used the same passphases and same tags and I still can't connect. I can see it because is registered at trezor suite but I can not connect
You just restore the seed as normal and then when prompted in Trezor suite, you select "hidden wallet" and enter your passphrase.
When you say "I can't connect" what does this mean? Does it load up a bunch of empty accounts or are you getting an error message of some kind?
@@CryptoGuide I was writing the wrong passphrase, that was the problem now everything it's fine thanks😁
Hey J.M.メディナ ヘスス, good to hear, feel free to shoot me a tip at www.reddit.com/user/Crypto-Guide/comments/czy13u/a_post_or_video_of_mine_was_helpful_feel_free_to/ :)
@@spinnito I have same problem.. but no re typing or re spelling of pass phrase works.. no mispelling either.. hidden wallet stays empty
You have a typo in your passphrase or your seed. I have recovered *many* wallets on Trezor devices, both with passphrase and without, never had a problem. Did you run the full recovery check to make sure your seed is correct?
How do I wipe and get a new seed?
Just follow the process to do the reset and then it will start again like a new device.
@@CryptoGuide just wanted to double check- does the wallet have to be empty, before doing this?
@@CryptoGuide so each time a reset is done, a new seed is generated ? I don’t have any funds on it yet.
.
please make vid how to change from 12 to 24 word seed using python
Do you need to use TrezorCTL in the command line? You could just use Electrum.
@@CryptoGuide managed with figure out with TrezorCTL using your vids and reddit, heard Electrum isnt great as it exposes seed. thanks for your help!
Good job.
Also, Electrum doesn't expose the seed at all, it basically just does the same workflow that is triggered via TrezorCTL
I wiped by mistake my devise and i do recovery but my accounts dont show ! Plz if anyonce can help
If you are recovering and getting different addresses (So a bunch of accounts with no balance or transactions, check with Trezor suite) then you have a typo in your seed and will need to try BTCRecover.
@@CryptoGuide thank u ! I use my wallet for axies and till know i dont know why its empty ….
If you are getting different addresses then this is likely due to a typo in your seed backup.
@@CryptoGuide even if typo in seed it will log me in another wallet ? If i use btcrocovery it will help me ? I have my axie in trezor and crypto 🤦♂️
That's what I'm trying to tell you... A different seed (or same seed with a typo) will generate different addresses, so if you are seeing a bunch of empty accounts then this can be why.
Are you using a Trezor T or a Trezor One?
This vid will get an avalanche of views once folks wake up to crypto.
Thanks :) It's already picking up a lot with the latest price action.
@@CryptoGuide You gave me the confidence to verify my passphrase and the underlying individual wallets enough to rely on it for coin transfer. This will be on a lot of folks' minds before that big day where they must get everything perfect. Thanks a million!
Glad it helped :)