I have found with the PVC flutes, that if you roll up a bit of paper towel and place it in the Slow Air Chamber (SAC) or breath chamber, that it will absorb some of the condensation and give you a longer play time without the mess. Thanks for the video.
Drill the holes 1-3mm more to the end so that they need to be bigger in size. Because you can bend the pitch of the notes way better with bigger holes. You can also flatten the area around the holes a little and surround them with a mold like bevel to make them easer to close properly.
Hi ! I wish to make my own PVC native american flute and I didn't found a real tutorial. Can you explain me ? Thanks P.S : Sorry if I do mistake, my English isn"t very good
I cut the holes (drilled and filed) then I used the file to cut in a channel between both holes, but fiddly but it works. You can cut the channel in the bird (the part which is mounted on, maybe easier
I have found with the PVC flutes, that if you roll up a bit of paper towel and place it in the Slow Air Chamber (SAC) or breath chamber, that it will absorb some of the condensation and give you a longer play time without the mess. Thanks for the video.
good idea, thanks for watching
You & your well designed Flute are beautiful 🌹 thank you for sharing
Drill the holes 1-3mm more to the end so that they need to be bigger in size. Because you can bend the pitch of the notes way better with bigger holes. You can also flatten the area around the holes a little and surround them with a mold like bevel to make them easer to close properly.
did that with the next one :D with the first one I was scared to drill the holes too big hahaha
Nice, love it
good job , the tube is completely hollow ?
nearly. the part between the air hole and the sound hole, where you create the wind channel is closed with a cork (I used stiff foam :) )
+Armin Hirmer ty friend
thank you another question where does the finger holes need to be place and aproximately how big
Hi !
I wish to make my own PVC native american flute and I didn't found a real tutorial.
Can you explain me ?
Thanks
P.S : Sorry if I do mistake, my English isn"t very good
how did you make the windway between the holes
I cut the holes (drilled and filed) then I used the file to cut in a channel between both holes, but fiddly but it works. You can cut the channel in the bird (the part which is mounted on, maybe easier
What are the dimensions please , thank you
WAIT, WHATTT. Jean-Claude Van Damme is now into Flutes????
Hello mr.armin,
Would u pls teach me how to make native american flute key of high A
Thank you
Greeting from Thailand
Jean Claude Van Damme 👍☺
:D
Good thank you
those sound great could you make a tutorial video on how to make them?
+Ricky Adams I will try next days to do one :)
+Armin Hirmer awesome thank you I can't wait to see :)
😎
what are the dimensions for the pvc pipe
it is a 3/4 inch pipe
E as medidas em cm
Get rid of his accent