ill never forget the first time i heard someone play a flute, i was 12 years old camping with my parents. sitting down by the lake watching the sun go down and i heard that beautiful sound, a girl in the campsite over was doing the same thing but playing her flute also. long story short me and that young girl have been married 43 years now.
I’ve never made a native American flute but here goes following your directions. My first instrument was a flute and I loved it. Music is one of my favorite pastimes. And I know will enjoy this flute as much as I have any musical instrument. I love the haunting sound it makes. Thank you so much for this gift of music.
When I got interested in getting a N.A. Indian flute, I wanted to understand how it worked and how I could make one. You just answered every question. The demonstration was priceless in understanding this. Thank you. You are an excellent teacher and engineer.
I've watched a lot of these PVC instructional videos, but this is the only one that gives me the confidence to build one that will actually sound the way it's supposed to! Once again, I THANK YOU for a great, no BS tutorial on something I've always been interested in!
+Craig Oldsen Thank you for the encouraging words. Don't be afraid to jump in there and mess up. A 10 foot length of PVC pipe is only a couple dollars and you have plenty of length to make mistakes with. Each mistake is a learning lesson and a potential key to point you in the right direction. eventually after being armed with enough knowledge gained from learning what does not work, you will end up with something that *DOES* work. Of course it is always best to have enough knowledge to start with that you can avoid the majority of mistakes.
I must of watched 50 videos until this one. All questions are answered and explained without all the uncertainty. Excellent presentation that finally made me feel confident in my first two build's. PVC to start following up with a bamboo. Thanks for the inspiration.
I made this using only a saw, file & xacto knife. It actually sounds very satisfying for pvc. I think I'll take it camping with me to torment sasquatch. I'd play it at home but my wife....... Well I'm less afraid of sasquatch....
Lonnie there are no limits to your talents! Your greatest talent is your ability to teach, that flute sounded so awesome! Many thanks for the instructions!!!
Sir, that is awesome. I don't know what your back ground is but you are one cool dude. Thank You for sharing your back country wisdom. I'm beginning year three of a pretty extreme hardship. I have always loved camping and the outdoors and due to some really bad misfortune I am surviving full time. I have always practiced many of the skills in your videos, my father taught me a great deal and I have always been pretty self sufficient but trying to get back to a more normal life is a daunting task. I am married to a wonderful women. She stays with her mother at night so she can ready herself for work. We see each other most every day. We lost our home, but we own a small property in the country but are not permitted to have a well or sewage system and we are not permitted to build a home. It's in a flood zone. So we haul water from a natural spring and use a small amount of solar power and and old truck to charge a couple deep cycle battery. My shack is 8' x 12' but it is pretty well insulated I use a small one burner propane stove to heat water for tea and coffee. And keep the window cracked a bit for obvious reasons. There is so much more to our story and I know I can be of help to others even less fortunate. I would like to share some of the solutions to problems we have encountered but I would like to stay anonymous so as not to further aggravate our circumstances.
the music you make with your flute is sooo relaxing and calming ….I love it I have tried several times to make a flute and I keep failing but I will rock-on and never give up. thank you for sharing your talents!
Been trying to make one of these for a week now. Watched a bazillion videos each one gives me a little different take on how to make a flute. Yours has offered some things new I am dying to try. I'm using PVC because it is readily available and inexpensive. Thanks for sharing your knowledge. You've made a beautiful sounding instrument.
This is amazing! I would love to make one of these, don't have the tools, but will keep this for reference. Love the tones coming from these flutes. Just absolutely beautiful!
Dear Mr. North, I must say that I thoroughly enjoyed your instructional video. Your slow, measured pace, and even volume made it easy for me to understand. I thank your for your gift to us. Blessings, pierre from New Mexico
Sir, absolutely amazing and now I understand why native American flutes are so pricey, didn't know it such was refined art and science. Thank you for posting this video and being so detailed in your explanations and for sharing your wisdom on this subject.
bowl4two Thanks for standing up for me but I did not take his comment as an insult but rather a compliment. Professor Dumbledore was the headmaster of Hogwarts school of wizardry in the Harry Potter book series. He sported a *LONG* gray beard and was considered, I believe to be a wise individual.
So Lawny my friend I truly appreciate you taking the time to teach us/me how to make this awesome little flute I'm really excited about this I am going to try and maybe make one out of some teek wood I have I will let you know how it goes thank you so much sir
Super video. I'm making a bamboo flute, but no bamboo flute videos go into as much detail. For example, none mentioned that the spacing can be changed from flutomats measurements and that holes will just need to be adjusted to the correct size for whatever note we want. So glad I found this. Thanks!
You are a true artisan. I live in a trailer in a state park with no access to tools or a shop. However, I have a five hole blue bear flute that is tuned to G. I was curious about how the tuning was done. Thanks for this video. I learned a lot. 😄
That's really slick! I've been wanting to buy a flute but I think I'll give this a got first. Nothing to lose but $2 in pvc tube and a bit of time. Thanks for the tutorial!
Really a great companion to one's soul, Lonnie... a soft whisper in the wild spaces provided by God. Something to remind us that no matter how small we are, we are never alone... for he will bring joy to out hearts wherever we are. Thank you,Lonnie and Connie, and God bless...
My grandfather use to make a simple flute with a piece "A branch" from a tree, guessing maple, a young Maple branch then made a small flute like whistle for me as a kid out on the Farm!! He used his jack knife to pull out the center of the piece of wood " the core" then he would Enoch it on an angle, then shove it back in to the outer skin of the branch!!! This is awesome and brings back memories .. Thanks 4 sharing bud.!!
Lonnie, I've watched many of your videos. Today I watched this one again and finally undertook the flute making project. I'm ecstatic to report that it worked. Thanks for the gift of sharing your many talents. Best of luck up North this winter and please keep the good content coming! I'm taking my flute on my next campout for sure.
I didn't have any corks so I used a corn cob, making it ever so slightly larger than the hole and forced it in. Also, I had the idea of taking a pvc coupling and grinding out the inside lip and sanding the inside to where it would slide over the pipe with a bit of resistance and it worked perfectly for the "bird".
I watched this yesterday and it left me shaking my head in disbelief. Your knowledge and talents seem to have no end. AND you are tech savvy too. I couldn't decide whether I should say so or not then thought if I had a friend that thought that way about me I wouldn't mind hearing it.
Well, I made 2 PVC flutes this past weekend. Thanks so much for your video, especially the NAFlutomat sight; what a wealth of information, the app tuner and for you just showing how to do it. Thanks again!
I watched your video the first time and downloaded "gstrings" to my Android device and followed along with your instructions, -very well done!! I have been playing around with a 23-note pan flute, a pentatonic 15-note pan flute AND a tunable PVC pan flute that I built. I knew that I needed some audio-scoring device to more correctly measure the lengths (not just to rely upon actual physical length of each tube) and this instructional tutorial will greatly assist me. My next project it to make a Native American flute as per this tutorial. Yours sounds very good! MUCH thanks for posting this video!
Soon as the store opens I'm away to get the makings for your flute. I've already got the tuning app downloaded. I'll get the hole measurements template on line and that's my project for today. Thanks for the instructions and inspiration, you're a mighty fine gentleman.
no you don't understand I'm tone deaf that means you can't tell the difference between different tones. I played the trumpet in school for one year. my instructor would tell me over and over it's the wrong note. and when I finally got it right I would just remember how I made it, but I could not tell the difference between that note and the note I made before it. yes I can make noise but not music. trust me you don't want to site next to me in church lol
That wonderful moment when you are looking for flute making information, and end up back on a channel you are subscribed to for wilderness camping advice. This man has too many skills.
Just make sure you coat the PVC with a safe coat or use tape to cover the exposed area. Do not put your lips on the plastic. My brother is a chemical engineer and he explained to me how PVC breaks down and is absorbed through the skin if any heat is applied and if there is moisture in the skin / on the skin.
Thank You Lonnie! Your knowledge and wisdom is only out distanced by your ability to share them with us! My best to you and Connie.... Regards....Old John
I can appreciate the work that goes into a professionally made instrument, but I would much rather create my own like you have. Great job, thanks for the time and effort.
You'll be making a disc for us soon I'm hoping Lonnie? Thank you for a very good video and thanks to Connie for the video editing. Really nice visiting with you both. Take care because we care... Duncan & Rebecca
Lonnie, I liked your presentation and wrote up the instructions you provided so that I could sit down with my grandkids and make flutes with them. BTW, my daughter is not happy with me right now... teaching them how to play the flutes comes later! I'm writing up the instructions more neatly with screenshots of your video. Would you like a copy to go over and, once everything is written up the way you like it, a final copy to provide to your channel followers if they ask for it?
The more i think about it the more that sounds like a good idea if it is in a digital format of some sort. If you don't mind, I would like a copy. I do not have a web page yet so am not sure how to make it down loadable for those interested other than just email it I guess.
That sounds like an excellent idea. Don't know when I'll get the time to bring that about but I do like that idea. it sounds like a win win situation for everybody.
Lonnie, I'd like to apologize for the delay. Some things have come up and they have put me behind a bit. If you would like to see what I have SO FAR just shoot me an email: conway.charles@gmail.com and I'll send you what I have so you can review it. I'm looking at needing at least another week so I can take care of what's going on and then get back to finishing the instructions. Again, sorry for the delay.
my name is ALBERTO DE LA PAZ from Puerto Rico. Congratulation. really you are a professor by the explanation on this video. Thanks very mucho for your class.
+Ted Palmer I am sure of one thing, I'll bet they did not use PVC from Home Depot. They probably tuned by ear to sounds that were pleasing rather than tuning to a predetermined note. There are several natural plant materials that have been used traditionally. "River cane" and bamboo are a couple that come to mind. I have personally made some "bushcrafted" flutes out of dried last year's "cow parsnip" stalks but I doubt that was used traditionally.
Nicely done! PVC can also be stained many different colors to make it more personalized. I can't play a musical instrument to save my life, but this looks like a fun project.
Thank you so much!when I went thruogh my awaking these style flutes really became a big love to me.I joined a group to make them but don't have the money or resources they do.But this I can afford and do!I love building things out of simple houshold things!peace be with you brother!
I am impressed also, pretty good, I see PVC now has 10001 uses. I am really going to try this. Thank you for making this video for others to try and make one.
I remember when I was young (around 14 ? That is long ago…) I made a flute like this, but much more simple with "Canne de Provence", a sort of bamboo. Only one bias hole and the cork to generate the sound. And no engine to fit the finger holes. The lower was a C for me and then I pierced the holes step by step from the down one, adjusting the size with ear. I just used a small knife and the flute sounded very well, and I had a great pleasure to play it.
I made one of these with 1inch pvc, mostly with hand tools and liked it so much, i made another, then another... The first one i tuned in E minor. The 2nd is tuned in C and the 3rd is tuned in B or was tuned before I broke it. I still have 2 very satisfying flutes. The C is my favorite but i'm still learning to play. It's good for strengthening the lungs for tai chi and kung fu. I made all 3 flutes in the traditional 5 hole style.
Some folks just don't get it, but once in awhile it just feels good to sit down and make your own stuff. Good job Lonnie liked it. 👍😎
Yep...
It's that feeling of accomplishment
ill never forget the first time i heard someone play a flute, i was 12 years old camping with my parents. sitting down by the lake watching the sun go down and i heard that beautiful sound, a girl in the campsite over was doing the same thing but playing her flute also. long story short me and that young girl have been married 43 years now.
JAKE that is beautiful. May you continue making beautiful music together for many more years 😆
JAKE That's awesome.
i am deeply touched may you be married many more years!
Nice, I am gonna be replicating this particular flute for my Tech Theatre class project for the Magic Flute.
Beautiful, thanks for sharing, incredible story
I’ve never made a native American flute but here goes following your directions. My first instrument was a flute and I loved it. Music is one of my favorite pastimes. And I know will enjoy this flute as much as I have any musical instrument. I love the haunting sound it makes. Thank you so much for this gift of music.
Anyone noticed how calming his voice seems, or is it just me?
This video popped back in my suggestions and this dude has a voice like public speaker or story teller. I'm serious vary calming.
He's a white Morgan Freeman.
Sy W amen
RimWulf Randall he must be related to bob ross
bob ross
When I got interested in getting a N.A. Indian flute, I wanted to understand how it worked and how I could make one. You just answered every question. The demonstration was priceless in understanding this. Thank you. You are an excellent teacher and engineer.
Been watching you for years and look who I stumble into again when I have a sudden interest in making myself a flute. Awesome video!
I've watched a lot of these PVC instructional videos, but this is the only one that gives me the confidence to build one that will actually sound the way it's supposed to! Once again, I THANK YOU for a great, no BS tutorial on something I've always been interested in!
+Craig Oldsen Thank you for the encouraging words. Don't be afraid to jump in there and mess up. A 10 foot length of PVC pipe is only a couple dollars and you have plenty of length to make mistakes with. Each mistake is a learning lesson and a potential key to point you in the right direction. eventually after being armed with enough knowledge gained from learning what does not work, you will end up with something that *DOES* work. Of course it is always best to have enough knowledge to start with that you can avoid the majority of mistakes.
I must of watched 50 videos until this one. All questions are answered and explained without all the uncertainty. Excellent presentation that finally made me feel confident in my first two build's. PVC to start following up with a bamboo. Thanks for the inspiration.
I made this using only a saw, file & xacto knife. It actually sounds very satisfying for pvc. I think I'll take it camping with me to torment sasquatch. I'd play it at home but my wife....... Well I'm less afraid of sasquatch....
Zero Negativity
Zero Negativity lol 😂 😂😂😂
How do you make a sound out of it
My old man had a similar issue when he started learning to play bagpipes 😂
You're a very brave man😉
Lonnie there are no limits to your talents! Your greatest talent is your ability to teach, that flute sounded so awesome! Many thanks for the instructions!!!
You are truly the Bob Ross of life in the woods! Thank you!!!
No way I thought the same thing Bob Ross
Same thought❤
I made one back in the 80's, I used 1" pvc, used a cork to direct to air flow, sounds deep and beautiful.
Good video 👌👍✝️👍
Sir, that is awesome. I don't know what your back ground is but you are one cool dude. Thank You for sharing your back country wisdom. I'm beginning year three of a pretty extreme hardship. I have always loved camping and the outdoors and due to some really bad misfortune I am surviving full time. I have always practiced many of the skills in your videos, my father taught me a great deal and I have always been pretty self sufficient but trying to get back to a more normal life is a daunting task. I am married to a wonderful women. She stays with her mother at night so she can ready herself for work. We see each other most every day. We lost our home, but we own a small property in the country but are not permitted to have a well or sewage system and we are not permitted to build a home. It's in a flood zone. So we haul water from a natural spring and use a small amount of solar power and and old truck to charge a couple deep cycle battery. My shack is 8' x 12' but it is pretty well insulated I use a small one burner propane stove to heat water for tea and coffee. And keep the window cracked a bit for obvious reasons. There is so much more to our story and I know I can be of help to others even less fortunate. I would like to share some of the solutions to problems we have encountered but I would like to stay anonymous so as not to further aggravate our circumstances.
Your amazing Shack Man
Good luck, hope you find what you are lookin for.
Sir that was the best pvc flute build I have seen, I can't wait to try this, love your videos, thanks for sharing
Excellent video and thoughtful instruction. Thank you!
Love your efficiency & simplicity. I've been making musical instruments myself for almost 60 years and love every minute of it.
Great video, thanks so much! I just made this for my physics class and it came out awesome!! ☺️
the music you make with your flute is sooo relaxing and calming ….I love it I have tried several times to make a flute and I keep failing but I will rock-on and never give up. thank you for sharing your talents!
Been trying to make one of these for a week now. Watched a bazillion videos each one gives me a little different take on how to make a flute. Yours has offered some things new I am dying to try. I'm using PVC because it is readily available and inexpensive. Thanks for sharing your knowledge. You've made a beautiful sounding instrument.
Good luck on the project.
Thanks for a great tutorial and an interesting site. From Russia with love.
This is amazing! I would love to make one of these, don't have the tools, but will keep this for reference. Love the tones coming from these flutes. Just absolutely beautiful!
Very welldone Lonnie. You explained that very well. The end result sounded very good.
Sandy
Dear Mr. North, I must say that I thoroughly enjoyed your instructional video. Your slow, measured pace, and even volume made it easy for me to understand. I thank your for your gift to us. Blessings, pierre from New Mexico
pierre5325 I GUESS HERE ISN'T VERY MUCH I CAN ADD TO THAT EXCEPT TO SAY, , ME TOO!
I live in las cruces I love New Mexico!
still bill g
@@stillbill3018 Me too *2
Sir, absolutely amazing and now I understand why native American flutes are so pricey, didn't know it such was refined art and science. Thank you for posting this video and being so detailed in your explanations and for sharing your wisdom on this subject.
thanks professor Dumbledore
bowl4two Thanks for standing up for me but I did not take his comment as an insult but rather a compliment. Professor Dumbledore was the headmaster of Hogwarts school of wizardry in the Harry Potter book series. He sported a *LONG* gray beard and was considered, I believe to be a wise individual.
*****
I wasn't serious. I didn't mean to be disrespectful. Just a joke. Actually i like your videos and you're a very good "teacher".
(ი.ი)
I love how precise he is I wish all my teachers were as patent as he is
You can't tune it you can tune a fish ha ha ha
The best explanation of a flute build that I have seen on a video yet. I have learned things and I have been making flutes for over 20 years.
You're voice made me grow a beard.
Critter Cosner Lol I found myself in a tree
Critter Cosner. Lol.. 😂😂😂
i became a tree
his voice made me wiser
Critter Cosner your*
That's the only video you need to get started. I've been looking for a straight forward video. Really appreciate that.
So Lawny my friend I truly appreciate you taking the time to teach us/me how to make this awesome little flute I'm really excited about this I am going to try and maybe make one out of some teek wood I have I will let you know how it goes thank you so much sir
Yes I would enjoy knowing how it turns out for you. I had my flute out just yesterday tooting on it briefly.
Super video. I'm making a bamboo flute, but no bamboo flute videos go into as much detail. For example, none mentioned that the spacing can be changed from flutomats measurements and that holes will just need to be adjusted to the correct size for whatever note we want. So glad I found this. Thanks!
I've watched for 3 seconds, and I already like the guy
You are a true artisan. I live in a trailer in a state park with no access to tools or a shop. However, I have a five hole blue bear flute that is tuned to G. I was curious about how the tuning was done. Thanks for this video. I learned a lot. 😄
That's really slick! I've been wanting to buy a flute but I think I'll give this a got first. Nothing to lose but $2 in pvc tube and a bit of time. Thanks for the tutorial!
Really a great companion to one's soul, Lonnie... a soft whisper in the wild spaces provided by God. Something to remind us that no matter how small we are, we are never alone... for he will bring joy to out hearts wherever we are. Thank you,Lonnie and Connie, and God bless...
I use schedule 80 pvc for my flutes. Using a thicker walled pipe makes for a less reedy sounding instrument.
I like the beige type myself for a lighter sound, but sch 80 is for most purposes the finest pvc for flutes
My grandfather use to make a simple flute with a piece "A branch" from a tree, guessing maple, a young Maple branch then made a small flute like whistle for me as a kid out on the Farm!! He used his jack knife to pull out the center of the piece of wood " the core" then he would Enoch it on an angle, then shove it back in to the outer skin of the branch!!!
This is awesome and brings back memories ..
Thanks 4 sharing bud.!!
I have also made whistles similar to what you are taking about.
Make A Wilderness Willow Whistle
ua-cam.com/video/m4cXEE3_NAI/v-deo.html
Lonnie, I've watched many of your videos. Today I watched this one again and finally undertook the flute making project. I'm ecstatic to report that it worked. Thanks for the gift of sharing your many talents. Best of luck up North this winter and please keep the good content coming! I'm taking my flute on my next campout for sure.
I cannot thank you enough. You made an incredible tutorial. Love and light my friend!
I didn't have any corks so I used a corn cob, making it ever so slightly larger than the hole and forced it in. Also, I had the idea of taking a pvc coupling and grinding out the inside lip and sanding the inside to where it would slide over the pipe with a bit of resistance and it worked perfectly for the "bird".
I watched this yesterday and it left me shaking my head in disbelief. Your knowledge and talents seem to have no end. AND you are tech savvy too. I couldn't decide whether I should say so or not then thought if I had a friend that thought that way about me I wouldn't mind hearing it.
We as people are always open to "attaboys" "kudos" etc. Thanks much for the kind words and thanks for watching.
Well, I made 2 PVC flutes this past weekend. Thanks so much
for your video, especially the NAFlutomat sight; what a wealth of information, the
app tuner and for you just showing how to do it. Thanks again!
Just amazing. Can't wait to make one of these and learn how to play. Thanks so much for your generosity. Such a balm to a troubled world.
I watched your video the first time and downloaded "gstrings" to my Android device and followed along with your instructions, -very well done!! I have been playing around with a 23-note pan flute, a pentatonic 15-note pan flute AND a tunable PVC pan flute that I built. I knew that I needed some audio-scoring device to more correctly measure the lengths (not just to rely upon actual physical length of each tube) and this instructional tutorial will greatly assist me.
My next project it to make a Native American flute as per this tutorial. Yours sounds very good! MUCH thanks for posting this video!
Soon as the store opens I'm away to get the makings for your flute. I've already got the tuning app downloaded. I'll get the hole measurements template on line and that's my project for today. Thanks for the instructions and inspiration, you're a mighty fine gentleman.
It sounds as good as my $90 (PROMINENT NAME GOES HERE) Native American flute... You have inspired me. Thank you.
Thanks very much for this. Just the right amount of info, I made two today for my son and I, turned out great. Was a great afternoon project!
Man of many talents. Loved watching how you build it. I'm tone deaf so no making music for me.
Doesn't mean you cant make music! There are apps for tuning, and with practice anyone can become fluent in recognizing tones. Never give up friend
no you don't understand I'm tone deaf that means you can't tell the difference between different tones. I played the trumpet in school for one year. my instructor would tell me over and over it's the wrong note. and when I finally got it right I would just remember how I made it, but I could not tell the difference between that note and the note I made before it. yes I can make noise but not music. trust me you don't want to site next to me in church lol
Tony Stites ù.
Tony Stites
I enjoy you so much. Even your voice is so calming. Native American flute is soothing. Nothing like it. Thank you.
PVC for survival situations, lets check it out
thats the new bait PepeLaugh
That wonderful moment when you are looking for flute making information, and end up back on a channel you are subscribed to for wilderness camping advice. This man has too many skills.
Just make sure you coat the PVC with a safe coat or use tape to cover the exposed area. Do not put your lips on the plastic. My brother is a chemical engineer and he explained to me how PVC breaks down and is absorbed through the skin if any heat is applied and if there is moisture in the skin / on the skin.
Hello Sir, I'm Sanjay Mandal from India...I'm watching your video and I must say with Love and Respect - You are a ARTIST ...
Another Awesome video by the Master Bushman! Thanks Lonnie for your time and effort in making this video.
The simplicity of construction is attractive, and the soothing sound is relaxing. The instrument was nice too..
Awesome, great job and sound! Thx for sharing.
Waldhandwerk - BushcraftSurvival i
Waldhandwerk - BushcraftSurvival ,i
That was the best Native American style flute video I have ever seen!
Great work and very good explanation Lonnie, the sound is just great my friend, thanks for sharing and take care, Taro
Thank You Lonnie! Your knowledge and wisdom is only out distanced by your ability to share them with us! My best to you and Connie.... Regards....Old John
Great job Lonnie a man with great skills. See you in the woods.
Wow! Just a PVC pipe, but it gives a very beautiful sound...
wow .. you're a born teacher .. so clear I think I could do that.Thank you very much!
Awesome and informative video. Thanks for sharing Lonnie! Peace!
I finished my flute tuned it and it turned out wonderful thankyou for your knowledge
+Matthew Nolen That is awesome and thanks for letting me know. I always enjoy hearing when one of my instructional videos have helped someone.
Great work, very clever, and sounds great :)
I can appreciate the work that goes into a professionally made instrument, but I would much rather create my own like you have. Great job, thanks for the time and effort.
You'll be making a disc for us soon I'm hoping Lonnie?
Thank you for a very good video and thanks to Connie for the video editing.
Really nice visiting with you both.
Take care because we care... Duncan & Rebecca
One of the most soothing sounds ever . Thank you.
Lonnie, I liked your presentation and wrote up the instructions you provided so that I could sit down with my grandkids and make flutes with them. BTW, my daughter is not happy with me right now... teaching them how to play the flutes comes later! I'm writing up the instructions more neatly with screenshots of your video. Would you like a copy to go over and, once everything is written up the way you like it, a final copy to provide to your channel followers if they ask for it?
The more i think about it the more that sounds like a good idea if it is in a digital format of some sort. If you don't mind, I would like a copy. I do not have a web page yet so am not sure how to make it down loadable for those interested other than just email it I guess.
Absolutely. I'll try to have you a draft for review by the end of the week
I have been thinking about that. Have you considered posting it on the www.instructables.com/ website and adding the link to your video description?
That sounds like an excellent idea. Don't know when I'll get the time to bring that about but I do like that idea. it sounds like a win win situation for everybody.
Lonnie, I'd like to apologize for the delay. Some things have come up and they have put me behind a bit. If you would like to see what I have SO FAR just shoot me an email: conway.charles@gmail.com and I'll send you what I have so you can review it. I'm looking at needing at least another week so I can take care of what's going on and then get back to finishing the instructions. Again, sorry for the delay.
my name is ALBERTO DE LA PAZ from Puerto Rico. Congratulation. really you are a professor by the explanation on this video. Thanks very mucho for your class.
Thanks sir for
this video ....
I make a bamboo flute and a pvc flute
Still drums music
How You prepared it Bro. I wanna see please
The greatest Flute making tutorial out there!!!Thanks a million!!!!!!
I really enjoyed this video Lonnie . Thanks for showing us how :0)
What an excellent tutorial! Thank you sir for posting this. I cannot wait to try to make one!
Could I use copper pipe instead? Just thought it would make for a cooler looking flute
I do not know how much the thin wall of the copper pipe would affect the performance. I guess you could try it and see.
GoSub, let us know the results man
Paint it.
the thinner the wall the more high pitched sound ya would get I believe
@@Far-North-Bushcraft-Survival I don't think the wall is thick enough to file the correct flat spot where the air holes are.
What an amazing talent you have! This was awesome to watch and totally impressive to see the end results. 👍🙏✌️
man thats technical
how do you suppose the old ones did it?
thanks brother long beard!
+Ted Palmer I am sure of one thing, I'll bet they did not use PVC from Home Depot. They probably tuned by ear to sounds that were pleasing rather than tuning to a predetermined note. There are several natural plant materials that have been used traditionally. "River cane" and bamboo are a couple that come to mind. I have personally made some "bushcrafted" flutes out of dried last year's "cow parsnip" stalks but I doubt that was used traditionally.
They also had different scales, which is what gives some First Nations music a "weird" sound to Western ears.
Nicely done! PVC can also be stained many different colors to make it more personalized. I can't play a musical instrument to save my life, but this looks like a fun project.
There are now even some great looking paints for plastic that makes the painted article look like it is made from stone.
Gandalf wow
Excellent demonstration, now to watch it several times and build one for home use. Thank you.
Great Job....
Thank you ,for sharing your skills and experiences of bush craft, careful now some people may call it art. Much love from the great white north.
хто українець лайк.За відео лайк і підписка.
Thank you so much!when I went thruogh my awaking these style flutes really became a big love to me.I joined a group to make them but don't have the money or resources they do.But this I can afford and do!I love building things out of simple houshold things!peace be with you brother!
He surprisely look like Rabindranath Tagore.............xD
My favorite poet!
Good instructional video, you have a calm organized teaching style. very easy to follow.
Yasuo?
I am impressed also, pretty good, I see PVC now has 10001 uses. I am really going to try this. Thank you for making this video for others to try and make one.
What a wonderful and very inclusive video. My friend the more of your videos I watch the more respect I seem to gain for you. Thanks
Your a great instructional teachers. Very easy to follow. Thank you so much for sharing.
Thanks for this and all your videos. You remind me of my older brother who is no longer with us. Take care and be safe out there.
Dear Sir: Thank you for showing us your skills of how to make a FLUTE. Your are amazing man I hope I can make one for my Grand daughter.
You sir are a master craftsmen of the highest quality
Great job a lovely sound 👌
I watch all of your videos. I envy you with so much wisdom and knowledge. Beautiful country you are in.
Best of wishes to you.
I remember when I was young (around 14 ? That is long ago…) I made a flute like this, but much more simple with "Canne de Provence", a sort of bamboo. Only one bias hole and the cork to generate the sound. And no engine to fit the finger holes. The lower was a C for me and then I pierced the holes step by step from the down one, adjusting the size with ear. I just used a small knife and the flute sounded very well, and I had a great pleasure to play it.
woot, i made one. just got to tune it right and then make it shine! thanks for your awesome video tutorial.
Many Thanks lovely to see someone explain clearly as to how its done
I made a flute using this tutorial. My third effort was a success. Thanks for posting this.
I made one of these with 1inch pvc, mostly with hand tools and liked it so much, i made another, then another... The first one i tuned in E minor. The 2nd is tuned in C and the 3rd is tuned in B or was tuned before I broke it. I still have 2 very satisfying flutes. The C is my favorite but i'm still learning to play. It's good for strengthening the lungs for tai chi and kung fu. I made all 3 flutes in the traditional 5 hole style.
Thank you for the tutorial! It took about an hour with crude tools.