Cool to see people doing flutes their way. I made flutes by hand for over 30+ years and carved well over 200 (I quit counting at that point) by hand with a wood chisel. I learned how to make them the old way with the help of Doc Tate who encouraged me to keep going. I’m mostly out of the flute making game now. The hands don’t hold chisels as well any more. But I sure met some great people when doing trades and sales. It warms my heart to see people creating objects that bring joy and heal broken souls.
Could you share some of your craft with me please? I got interested into flutes after I started playing on my irish tin whistle, I make bows so I have pretty good supply of wood. Thank you very much!
@@FriedPi-mc5yt I have many questions to ask, but this one is my main interest and it is about size of the holes, if it does influence notation when played(finger placement) and then tuning the wooden whistle. I can give you my contact but not here in comment section. Thank you sir!
@@MrJemw10 I’ve considered doing a series of UA-cam videos for hand carving the flutes. Mostly how to measure them out by a persons body measurements rather than using a tape measure. This makes a flute that is as individual as the person making it. As far as how to play a flute. I stick with a method that has worked since Natives started making flutes. I listen to the birds and mimic them and then create songs around that. If I can get my son to help me shoot a few videos, I may post them.
Sounds hauntingly beautiful. I enjoy watching you create your Flutes then play them. It reminds me of a time when I used to make NAFlutes... All the hand sanding and burning and using those little Jewelers Files to get those perfect angles just the right size... Adjusting the block with whatever animal I decided to carve to put on top. Then blowing through the Flute to make sure it sounds in tune to my ears, then finally wrap a leather strap around it TIGHT. I never glued mine together as you do though. We all learn different ways to create things. I still play, and have a collection of Native American made Flutes as well as a few Bamboo Flutes I was experimenting with. Have some from Mexico and assorted Peruvian Flutes. Do make more of this type of video. It reminds me of great times had creating and teaching myself how to play. Ciao~💡🎵🦎🔥🌌🤙
Fascinating. Watching you craft flutes never gets old. It sounded really beautiful. I just ordered a couple of flutes from you and I *absolutely* cannot wait to recieve them. You have all of my support, Mr. Charlie!
Charlie … You are more than a craftsman; you are an artisan!!! Your flutes are cherished instruments, true works of art and vehicles for the music of the soul!!! Very well done instrument build and better music!!! Me and mine wish you and yours all things great and good; take care, be safe, all my best and God bless!!! Chuck Knight from Buffalo, Texas. 🤠🖖✝️🙏
hey Charlie, quiete impressive. im a woodworker and a carpenter myself so i can really appreciate the time and effort you put into your craft. im glad i watched this, it really increases my appreciation for your flutes. much respect and God bless.
After fires here last summer, evacuation and trying to repair and recover, things have been tense, moods are rough and sensitive. Enjoyed watching the flute being made and you playing at the end sure helped sooth some of those rough feelings we have here. Thank you! Santa cruz mountains California
After watching your videos and reading a lot of the comments here, I can't find any reason to say negative words about any of your videos or construction techniques or words that you say or how you say them. But then that might be why the Nez Pierz who I worked with on fires in Montana called me, "whatever." A positive word brings joy.
@@rogerbrowning4637 thank you again, you too! Be careful when making it and don't give up! It would be unusual if I didn't have a video to help solve any troubles you may have and making it but if I don't, let me know.
Never disappointed in watching your videos. I will admit, I was on pins and needles for a while, talking to the video saying "please don't use PVA glue", but I had no reason to worry as you masterfully pulled out the CA glue. As you know, teak contains an oil which can cause glue joints to fail. This can be somewhat remediated when using PVA glue by wiping the mating surfaces with acetone before assembling, but it's still a gamble. If memory serves, this is your 3rd video foray into the "cutting board flutes" genre that you created, and was a tour de force of your versatility and skill. Well done. 😉
Great idea for good piece of wood. I never get enough flute making. Your D flute dimensions resulted in my favorite flute of 8 I have made. The bird and both ends are winge. Aromatic cedar for the body of the flute. 1" bore. Thank you for getting me addicted to flute making.
That is a fantastic looking flute and it sounds beautiful. I just ordered your book and I can't wait to start making a flute or two or maybe a few. I have been binge watching all of your videos. You have a great bunch of videos packed full of knowledge, entertainment, and appreciation for your history. I thoroughly enjoy all of your videos! Keep up the great work. :)
You got me building flutes a few years ago with your book. Since I am a builder of wooden boats, I used boatbuilding woods--not teak yet--but I did use two types of Mahogany, Alaskan Yellow Cedar, Atlantic White Cedar and Sitka Spruce. I also used bamboo and Ipe. I really love the sound of the Native American flute, (reminds me of the call of the Loon echoing across a Maine lake), and the pentatonic scale. I can make lovely sounds just improvising as a rank amateur! I varnished them with a marine varnish that rubs out well to a satin sheen and made beads to decorate the leather thongs with Sculpey clay--cheating, I know--but you can make lovely turquoise blue, jasper red and white beads
I used to hear a native american flute being played in the woods behind my house. It was always very faint comforting and beautiful sounding. I only would hear it as the sun was beginning to rise. Nobody lives behind me my neighbors also heard it.
This is really cool and very beautiful (to look at and listen to) but you did not show or explain the significance of the figurine, why and how it is attached.
Hello Mr. Charlie I am doing well. It's been a little over 4 years since I moved to Starkville, Ms. During my move i guess the flute you made and gave me got lost. Sure enjoy watching your videos on making them. Just wanted you to know I am well and to say Merry Christmas and a Happy New Year from Starkville, Ms. I use to live in the 1st Mobilehome on the right on Otter Pond Road. Hope you and your family are doing well. I will be down to Dothan in 2024 for my 50th class reunion and hope to see you. Paul Lee Phillips
Thank you so very much for your kind words! Thanks also for watching. Please be sure to share, like And subscribe and check out some of my hundreds of other videos!
Браво Мастеру, за такую прекрасную работу !!! В соседнем комментарии, я с радостью поделился своими авторскими мелодиями, которые просто напеваю под-гитару.
me again ! haha , i appreciate the education so much in helping me make my first flute.. but when you carve out the middle of the wood , i just have two questions i never seem to find in any videos all over.. what is the size dimension for the fist small oval and the large oval on the inside of the wood? also does that go into ratio with the dimension of the wood planks ? im sorry if its a complicated question or one you've answered before .. i am currently homeless and have always struggle with anxiety and depression . ive always been into the natural elements trees water animals mountains. and ive always noticed mainstream music is too much stimulation when im having a moment . lyrics beats computer generated sounds.. one night in my late teens i found native american flute music. and it calmed my soul sooo much. but i never thought i could play. and i love proving to myself i could do things.. so making my own flute when i get the money for equiptment and having your tips and legit training through your free videos when im already financially struggling helps alot. i wont be as perfect as you but you gave me the heart to fall in love with a new hobby and help my self in the process, i cant wait for the music to take my mind off things.. natural music with real instruments is so peaceful .i appreciate you sharing your craft with the world !
Great video just found your channel... Sub'd... I'm definitely going to try and make one of these. can you tell me what is the purpose of the burning, will I be able to make this by just filing all those features at the top "whistle sound holes" part?
Thanks for watching and great questions! The burning process is to both harden the wood slightly and smooth the inside of the flute. And your next question, yes. I would recommend watching some of my other videos however that explain it in more detail.
I tried making my own. Used an online hole calculator. I do get sound with all holes open, then closing the first two will change the tone. But when closing the third all sound is gone. When all closed i mist blow really softly to get a low sound. What can i do to improve this? I was thinking either make the airgap a little deeper, (the part beneath the turtle in this vid), or by enlarging the hole at the end of the flute. Anyone with Experience that can help?
Hey, great job trying to make your own flute! One thing I've always preached about was not using online calculator tools". They can help you make a key of low B flute 3/8 of an inch in diameter and 5 ft long. We know this won't make a good flute however! That having been said, it could actually be the problem with the one you made. It is likely however the problem has to do with the sound hole or the track. I have countless videos on these subjects. Please check them out. If you can't figure out what's wrong, contact me through my website. Not sure if anybody else in the world is as willing to help or knowledgeable. 😉
Broo I'm from india and loving your work, bro native American flute mesmerize my whole body felt me like I'm in another dimension, I want 1 in my country they're not shops for it and not available online too, can you make 1 for meee plsssss at a low price bro plllssssssss
Прекрасное видео, Благодарю! Я сделал флейту по другому видео из Ютуба, но там выходное отверстие открытое, я так и сделал, но у меня вообще нет звука. А как только закрываю выходное отверстие - звук есть. Не знаете почему так? Вы делаете с открытым выходным отверстием? Если да, то в чем разница? Может подскажете в чем у меня может быть ошибка...❤
@@BlueBearFlutes is it possible for us to find the fingerings for the last song? I have seen the last part 100 times and I try to play it throu your vid :) thanks a lot greetings from Greece
Thanks for the great videos you share . I have a question, you sand on the lathe , why don't put your finish on the lathe too? I am looking forward to getting my book and kit; If possible could you sign my book. best of everything to you brother.
Hey Joel, great question. I used to do my finish on the lathe as well but for production purposes, because of how many flutes we make, it's not an option anymore. I will gladly sign you book my friend! Thanks so much for watching!
This video was more of a "proof of concept" to show how to get teak (and other) specialty woods for making flutes cheap - however we have tons of videos on specifics. Please check them out and let me know if you have any questions!
Thanks! We have tons of others, make sure you check them out. Also a new how to make a hardwood flute with a knife video coming soon! It's in editing now.
Enjoyed the video. Looking at making my own so I can learn to play. Financial issues otherwise I'd buy one from your shop. Couple of questions though, only because I didn’t see it in video. Is the end at the far side of flute open or closed? Looked like you were drilling it out then realized you were drilling out the mouthpiece. If I remember correctly the size for the area that slows down air (1st chamber) doesn’t matter. Correct?
Beautifull! Hello great artist and teacher. What glue do you use to glue the two rectangular parts? Cyanoacrylate? Thank you very much🙏🏻 Ciao grande artista e maestro. Che colla usi per incollare le due parti rettangolari? La cianoacrilica? Grazie mille🙏🏻
I do mention it in other videos, but basically it helps to "clean the inside" from any fibers and mildly harden as well as make it somewhat impervious to moisture/bacterial growth. It's not required, only a remnant of old techniques.
Senior moment here. Something I'm clearly not seeing. At about 4:10 you've routed TWO chambers in the halves. How does the air flow get from the smaller (I assume) to the larger??? Looks like you'd just be blowing into the smaller chamber ... only!!!
I have a question what key was that you was playing. I have always loved that song very haunting but very beautiful. One day hopefully I can have to money to have you make one for me. Lawrence B Smith (LT) US Army
Hey Charlie, Do you remember the video with you making a flute from a bamboo cutting board? Well, I made one the same way too after seeing your flute and how well it turned out. Mine turned out great too until I dropped it and it broke in two like magic along the joint. I have learned that mineral oil does not like some glues and you first need to sand the surfaces. That was not the bad part, I had just given it to its new owner. The look on her face was priceless. I laugh so much, if it had not been a good friend that was now it's owner there would have been trouble. Nothing a hit on the sanding belt and some glue didn't fix, but how funny. See what your videos bring, fun and laughter. The flute you just made sounds fantastic. Thanks my friend. Tom
Also, if I had made this flute with only a pocket knife (like in my other videos), you could say "the $7 doesn't account for the hours and hours of skill and knowledge it takes to do this" 🤪
Actually a couple of reasons. The first reason is it's the most convenient way to microscopically resize a hole. The second reason is because cauterizing the hole stops it from being able to absorb or release moisture which will prevent it from cracking in the future. There are other reasons that I burn the tracks into flutes.
Hey, sorry if I missed any of your other comments. I have been on a short sabbatical. I do mention it and several other videos and I'm surprised that you haven't come across that yet. Sometimes it's easy to miss that. This bit is called a flute or Cove and is 3/4 in diameter although they usually measure them by the radius which of course it's 3/8. Doesn't really matter what brand you buy and there are several on the market. These measurements are of course in standard however you can still find it under its metric counterparts all over the world.
@@BlueBearFlutes Hi, thank you for answering. Yes you probably mansion it many times and I was not attention to that detail but now I know 👍 The 3/4 is 19.05 mm and 3/8 is 9.5 mm and that’s maby to small for a full size flute, the 3/4 seem to be the one I will choose. I think I will buy a portable router machine instead of table router because they are way more expensive. Hope to see more videos 😃👍
That's an amazing instrument and beautifully made! (I hate to be "that guy", but on the table saw, please push the wood right through past the blade... A couple of times you left a loose piece flopping around between the blade and the fence, and you could have had a nasty kickback! I just don't want to see you get hurt.)
Thanks for all your videos. Just a question though. Why are you using 'for metal' drills instead of 'for wood' drills? The tips are different between the two.
HAHAHA! I'm surprised this question hasn't come up before. I mentioned way back that I like bradpoint bits, but the bits I currently use come in a package which says "wood, metal, plastic". Think I need an armchair in my shop though, this is too much work making flutes!
@@BlueBearFlutes quick image search.. i an talking about this type of tip: www.woodtoolsanddeco.com/en/auger-drill-bits-for-wood/10459-set-of-5-wood-drill-bits-456810-mm-with-hex-shank-8719762707196.html
Okay! I rummaged around in the wood shed and came up with two beautiful pieces of bamboo. 1st piece. 30" , 3 1/2 sections, 8" between node's . 7/8"id, 1 3/8"od, 1/4"wall. crazy straight. 2nd piece. 25", 2 sections, sealed on one end. 3/4"id, 1 5/8"od, 7/16" thick wall. Not as straight. So these will be my 1st attempt at this craft. Now to search through your gazillion video's. Lol that will be the hard part. 🤣🤣
@@BlueBearFlutes Just realized that my flute is full of mould in the blowing hole. I made it using a river cane, so is easy to clean. Any advice to remove it?
This video is more of a proof in concept and for that reason I did not share the measurements. I have hundreds of other videos making particular flutes, specific sizes, individual keys and offer the measurements for those. ua-cam.com/users/bluebearflutes
Maestro...además de hacer tan increíble flauta, por favor suba las partituras de esa música ensoñadora...que lo mejor sea para ud y su familia...hare krishna
This video was more a "proof that you could do something" video not necessarily "how to do something". If you check out my videos on how to make flutes, I usually mention the router bit sizes in those.
@@BlueBearFlutes I will do just that. I'm researching native american flute making for my first attempt and making one. So far your videos have been a great resource. I'm going to subscribe. Do you have a website with a forum for flute making? Something I can ask questions or advice on?
@@steadfasttherenowned2460 You can do that on Blue Bear Flutes facebook page. Keep in mind though I have HUNDREDS OF VIDEOS on how to make Native American Flutes so if you have a question, there is already an answer. So if you ask a question on my facebook, someone will usually reply with a link to one of my videos.
@@BlueBearFlutes no worries. Im a custom solid wood furniture maker and finisher by profession. Any questions or clarifications I may ask for, will be worth answering and only after scouring your videos. Any advice I may need will most likely be about the fine nuances and advanced tricks of the trade. Thank you for responding. I'm looking forward to this endeavor.
@@BlueBearFlutes If this is up for an open vote, I'm kinda thinking the mischievous type like Loki. Pan had best watch his back now for that top Flute God rank.
@@BlueBearFlutes Good or bad, I don’t care. After my first total failure of a flute, you’re the God I’m praying to when I get to the track area on my second
I tried to order your Flute making book like 2 weeks ago through Amazon? still have not received! RuNNING LATE? Are you out of publication>>? Dennis Sigala
HAHAHA? Amazon has you so well trained that you are upset after 2 >> WEEKS?? Why didn't you publicly post this on one of Amazon's youtube videos? Should have bought it from my website! Would have received it already. >?
I would love to have your flute, but I'm in Italy, I spend a lot on shipping and taxes. Maybe a repaired flute of yours, because it had a cosmetic defect ... a used flute ...
@@BlueBearFlutes In Italy we are under dictatorship: green pass. Many of us are not paying the monthly salary, we are without salaries. Unfortunately I can spend very little, I would love to have a flute that has inside your Soul, but I cannot spend
Cool to see people doing flutes their way. I made flutes by hand for over 30+ years and carved well over 200 (I quit counting at that point) by hand with a wood chisel. I learned how to make them the old way with the help of Doc Tate who encouraged me to keep going. I’m mostly out of the flute making game now. The hands don’t hold chisels as well any more. But I sure met some great people when doing trades and sales. It warms my heart to see people creating objects that bring joy and heal broken souls.
Could you share some of your craft with me please? I got interested into flutes after I started playing on my irish tin whistle, I make bows so I have pretty good supply of wood. Thank you very much!
@@borisv.6503 What do you want to know?
@@FriedPi-mc5yt I have many questions to ask, but this one is my main interest and it is about size of the holes, if it does influence notation when played(finger placement) and then tuning the wooden whistle. I can give you my contact but not here in comment section. Thank you sir!
Is there a good online course you can do? I play a couple, love them
@@MrJemw10 I’ve considered doing a series of UA-cam videos for hand carving the flutes. Mostly how to measure them out by a persons body measurements rather than using a tape measure. This makes a flute that is as individual as the person making it. As far as how to play a flute. I stick with a method that has worked since Natives started making flutes. I listen to the birds and mimic them and then create songs around that. If I can get my son to help me shoot a few videos, I may post them.
I love that u do not talk but just show in every detail the essential things to do. Superb.
Sounds hauntingly beautiful. I enjoy watching you create your Flutes then play them. It reminds me of a time when I used to make NAFlutes... All the hand sanding and burning and using those little Jewelers Files to get those perfect angles just the right size... Adjusting the block with whatever animal I decided to carve to put on top. Then blowing through the Flute to make sure it sounds in tune to my ears, then finally wrap a leather strap around it TIGHT. I never glued mine together as you do though. We all learn different ways to create things. I still play, and have a collection of Native American made Flutes as well as a few Bamboo Flutes I was experimenting with. Have some from Mexico and assorted Peruvian Flutes. Do make more of this type of video. It reminds me of great times had creating and teaching myself how to play.
Ciao~💡🎵🦎🔥🌌🤙
Fascinating. Watching you craft flutes never gets old. It sounded really beautiful.
I just ordered a couple of flutes from you and I *absolutely* cannot wait to recieve them. You have all of my support, Mr. Charlie!
Charlie … You are more than a craftsman; you are an artisan!!! Your flutes are cherished instruments, true works of art and vehicles for the music of the soul!!! Very well done instrument build and better music!!! Me and mine wish you and yours all things great and good; take care, be safe, all my best and God bless!!! Chuck Knight from Buffalo, Texas. 🤠🖖✝️🙏
I was eagerly waiting for tha last minutes of the video to hear her voice! stunningly great
The vacuum sucking up all the dust as you sand on the lathe is very satisfying to watch.
I should probably make an ASMR video for that. 😄
hey Charlie, quiete impressive. im a woodworker and a carpenter myself so i can really appreciate the time and effort you put into your craft. im glad i watched this, it really increases my appreciation for your flutes. much respect and God bless.
Thank you for your kind words my friend! Thanks for watching!
Awesome video, you're a good craftsman, thank you for showing your process. Much love from New Zealand ✨
@@SCRSggIE 🙏🏼🙂🙏🏼 Thank you so much for watching! Be sure to check my hundreds of other videos on flute making!
I love your contents. Greetings from Chile
@@domingouribe 🙂👋🙏🏼
This flute is absolutely beautiful. And it sounds awesome.
You Sir are a true Master at what you do .
After fires here last summer, evacuation and trying to repair and recover, things have been tense, moods are rough and sensitive. Enjoyed watching the flute being made and you playing at the end sure helped sooth some of those rough feelings we have here. Thank you!
Santa cruz mountains California
Good luck my friend. My heart's with everyone who had to go through that.
Beautiful mate. Healing music too. Cheers ...
Beautiful flute and song Charlie! ;) Have a good day, take care and stay safe my friend! :) #Heart
Thank you, as always my friend! You too!
After watching your videos and reading a lot of the comments here, I can't find any reason to say negative words about any of your videos or construction techniques or words that you say or how you say them. But then that might be why the Nez Pierz who I worked with on fires in Montana called me, "whatever." A positive word brings joy.
Thank you my friend!
Have a good one. I'm going to go make a flute today.
@@rogerbrowning4637 thank you again, you too! Be careful when making it and don't give up! It would be unusual if I didn't have a video to help solve any troubles you may have and making it but if I don't, let me know.
That music. Leaves you with a deep sense of both nostalgia and loneliness. To mee anyway for some reason lol.
check out boards of canada
Never disappointed in watching your videos. I will admit, I was on pins and needles for a while, talking to the video saying "please don't use PVA glue", but I had no reason to worry as you masterfully pulled out the CA glue. As you know, teak contains an oil which can cause glue joints to fail. This can be somewhat remediated when using PVA glue by wiping the mating surfaces with acetone before assembling, but it's still a gamble. If memory serves, this is your 3rd video foray into the "cutting board flutes" genre that you created, and was a tour de force of your versatility and skill. Well done. 😉
Thanks again my friend!
Very good job i love you work god bless you from USA north Carolina
Great idea for good piece of wood. I never get enough flute making. Your D flute dimensions resulted in my favorite flute of 8 I have made. The bird and both ends are winge. Aromatic cedar for the body of the flute. 1" bore. Thank you for getting me addicted to flute making.
That's too cool! The flute I made in this video is actually one of my favorites as well!
That is a fantastic looking flute and it sounds beautiful. I just ordered your book and I can't wait to start making a flute or two or maybe a few. I have been binge watching all of your videos. You have a great bunch of videos packed full of knowledge, entertainment, and appreciation for your history. I thoroughly enjoy all of your videos! Keep up the great work. :)
Thank you so very much James! We have a lot more videos coming soon.
That was a really cool flute , sound was amazing !!
Hey, I haven't forgotten about you. Your flute is on my finishing table and I will be dropping it by soon!
You got me building flutes a few years ago with your book. Since I am a builder of wooden boats, I used boatbuilding woods--not teak yet--but I did use two types of Mahogany, Alaskan Yellow Cedar, Atlantic White Cedar and Sitka Spruce. I also used bamboo and Ipe.
I really love the sound of the Native American flute, (reminds me of the call of the Loon echoing across a Maine lake), and the pentatonic scale. I can make lovely sounds just improvising as a rank amateur!
I varnished them with a marine varnish that rubs out well to a satin sheen and made beads to decorate the leather thongs with Sculpey clay--cheating, I know--but you can make lovely turquoise blue, jasper red and white beads
Thank you so much for all the information.
Great work and beautiful sounding flutes.
Wow, amazing. Thank you for sharing!
I used to hear a native american flute being played in the woods behind my house. It was always very faint comforting and beautiful sounding. I only would hear it as the sun was beginning to rise. Nobody lives behind me my neighbors also heard it.
It was the YunwiStunsdi!
It's coming from underground, the Native Americans had a sacred relationship with the ant ppl, You heard the flute because unlike most ppl you care. ❤
@silverufo6735 hey, you ever watched the why files?
Teak mellows to a lovely color as it ages.
This is really cool and very beautiful (to look at and listen to) but you did not show or explain the significance of the figurine, why and how it is attached.
This was more of a proof of concept video, I do have tons of other videos on that however! Thanks for watching!
Incredible!🌲🌎🎶💛♾️
Sounds so good 👍👍👍👍👍👍
Hello Mr. Charlie
I am doing well. It's been a little over 4 years since I moved to Starkville, Ms.
During my move i guess the flute you made and gave me got lost. Sure enjoy watching your videos on making them. Just wanted you to know I am well and to say Merry Christmas and a Happy New Year from Starkville, Ms.
I use to live in the 1st Mobilehome on the right on Otter Pond Road. Hope you and your family are doing well. I will be down to Dothan in 2024 for my 50th class reunion and hope to see you.
Paul Lee Phillips
so many great techniques
Very art ispired video, pretty cool
Thank you so very much for your kind words! Thanks also for watching. Please be sure to share, like And subscribe and check out some of my hundreds of other videos!
Perfect sound!
Nicely done - I love your videos
Thanks!
Браво Мастеру, за такую прекрасную работу !!!
В соседнем комментарии, я с радостью поделился своими авторскими мелодиями, которые просто напеваю под-гитару.
me again ! haha , i appreciate the education so much in helping me make my first flute.. but when you carve out the middle of the wood , i just have two questions i never seem to find in any videos all over.. what is the size dimension for the fist small oval and the large oval on the inside of the wood? also does that go into ratio with the dimension of the wood planks ? im sorry if its a complicated question or one you've answered before .. i am currently homeless and have always struggle with anxiety and depression . ive always been into the natural elements trees water animals mountains. and ive always noticed mainstream music is too much stimulation when im having a moment . lyrics beats computer generated sounds.. one night in my late teens i found native american flute music. and it calmed my soul sooo much. but i never thought i could play. and i love proving to myself i could do things.. so making my own flute when i get the money for equiptment and having your tips and legit training through your free videos when im already financially struggling helps alot. i wont be as perfect as you but you gave me the heart to fall in love with a new hobby and help my self in the process, i cant wait for the music to take my mind off things.. natural music with real instruments is so peaceful .i appreciate you sharing your craft with the world !
Great video just found your channel... Sub'd... I'm definitely going to try and make one of these. can you tell me what is the purpose of the burning, will I be able to make this by just filing all those features at the top "whistle sound holes" part?
Thanks for watching and great questions! The burning process is to both harden the wood slightly and smooth the inside of the flute. And your next question, yes. I would recommend watching some of my other videos however that explain it in more detail.
Love it!
Thanks!
Manos dirigidas por Hueuecoyotl Dios de la música. Hermoso trabajo hermano
@@rosendoreynoso-bx8rg Gracias hermano! 🙏🏼🙂🙏🏼
I tried making my own. Used an online hole calculator. I do get sound with all holes open, then closing the first two will change the tone. But when closing the third all sound is gone. When all closed i mist blow really softly to get a low sound. What can i do to improve this? I was thinking either make the airgap a little deeper, (the part beneath the turtle in this vid), or by enlarging the hole at the end of the flute. Anyone with Experience that can help?
Hey, great job trying to make your own flute! One thing I've always preached about was not using online calculator tools". They can help you make a key of low B flute 3/8 of an inch in diameter and 5 ft long. We know this won't make a good flute however! That having been said, it could actually be the problem with the one you made. It is likely however the problem has to do with the sound hole or the track. I have countless videos on these subjects. Please check them out. If you can't figure out what's wrong, contact me through my website. Not sure if anybody else in the world is as willing to help or knowledgeable. 😉
Push stick save fingers bro, great video, I'm trying to do the same 🙏
Wow ! That's Nice, Great, Unique, Fabulous!
Price Please?
All prices are on my website: bluebearflutes.com
Broo I'm from india and loving your work, bro native American flute mesmerize my whole body felt me like I'm in another dimension, I want 1 in my country they're not shops for it and not available online too, can you make 1 for meee plsssss at a low price bro plllssssssss
@wantedgaming9871 hey no problem! We already have them available on my website for very low prices!
So wonderful.
Прекрасное видео, Благодарю! Я сделал флейту по другому видео из Ютуба, но там выходное отверстие открытое, я так и сделал, но у меня вообще нет звука. А как только закрываю выходное отверстие - звук есть. Не знаете почему так? Вы делаете с открытым выходным отверстием? Если да, то в чем разница? Может подскажете в чем у меня может быть ошибка...❤
этот тип флейты должен быть открытым. У меня есть множество других видео, которые помогут вам. Пожалуйста, проверьте их!
your channel is the best... thanks for everythink... just a question why you dont use wood glue?
Thank you for your kind words! I do use a type of wood glue. It's called tight bond. You'll see it in many of my other videos.
@@BlueBearFlutes is it possible for us to find the fingerings for the last song? I have seen the last part 100 times and I try to play it throu your vid :) thanks a lot greetings from Greece
@@cnclathe21 ua-cam.com/video/EDvhSwO9Ggc/v-deo.html have you watched this?
Thanks for the great videos you share . I have a question, you sand on the lathe , why don't put your finish on the lathe too? I am looking forward to getting my book and kit; If possible could you sign my book. best of everything to you brother.
Hey Joel, great question. I used to do my finish on the lathe as well but for production purposes, because of how many flutes we make, it's not an option anymore. I will gladly sign you book my friend! Thanks so much for watching!
@@BlueBearFlutes Thanks
I like the way you cut and burned the airway where the fits.
If you like that, you should really check out some of my other videos!
Sweet sound!
Nice job 👍🌹
Thanks!!
Thank,s for you my dear
Great build, how do you get the finger hole dimensions and distances?
This video was more of a "proof of concept" to show how to get teak (and other) specialty woods for making flutes cheap - however we have tons of videos on specifics. Please check them out and let me know if you have any questions!
Super cool video!! Subbed 👌👍
Thanks! We have tons of others, make sure you check them out. Also a new how to make a hardwood flute with a knife video coming soon! It's in editing now.
@@BlueBearFlutes, nice! I'm definitely going to check it out!
Eu toco flauta e o som dessa aí tá perfeito..... 👍👍👍👍👍👍👍👍👍
Enjoyed the video. Looking at making my own so I can learn to play. Financial issues otherwise I'd buy one from your shop.
Couple of questions though, only because I didn’t see it in video.
Is the end at the far side of flute open or closed?
Looked like you were drilling it out then realized you were drilling out the mouthpiece.
If I remember correctly the size for the area that slows down air (1st chamber) doesn’t matter. Correct?
How can I purchase by mail. I like to purchase a complete easy to follow course on how to play the Native American Flute
It's always best to contact me through my website first.
Beautifull!
Hello great artist and teacher. What glue do you use to glue the two rectangular parts? Cyanoacrylate? Thank you very much🙏🏻
Ciao grande artista e maestro. Che colla usi per incollare le due parti rettangolari? La cianoacrilica? Grazie mille🙏🏻
Hi sir, I would like to kindly ask why it is necessary to burn the internal air chamber?
I do mention it in other videos, but basically it helps to "clean the inside" from any fibers and mildly harden as well as make it somewhat impervious to moisture/bacterial growth. It's not required, only a remnant of old techniques.
@@BlueBearFlutes Thank you for the answer and for your attention!
@@ninimmusic you bet! Please be sure to check out my other videos!
Senior moment here. Something I'm clearly not seeing. At about 4:10 you've routed TWO chambers in the halves. How does the air flow get from the smaller (I assume) to the larger??? Looks like you'd just be blowing into the smaller chamber ... only!!!
Exactly! More description in my hundreds of other videos, too much to type here. Try "the secret to Native American flute making" video.
see 18:45 that is where the "airway" connecting the 2 chambers is made, and 21:25 where the Totem to adjust the airway is made.
Tuyệt vời , và tôi cũng mơ ước để có một nhạc cụ thế này
@@hiepsynguyen Tôi có rất nhiều video hướng dẫn cách làm chúng, vì vậy sẽ không khó nếu bạn muốn tự làm! 😀
Complimenti 👋👋👋 👍
Am I correct in assuming you used super glue to glue the the blanks together because of the oils present in teak? Lovely flute. :-)
Hahaha! Would have been a reasonable reason, but I did it to be quick!
I have a question what key was that you was playing. I have always loved that song very haunting but very beautiful. One day hopefully I can have to money to have you make one for me.
Lawrence B Smith (LT)
US Army
The intro song or this flute? This flute is a B, but the intro song varies. I have a video for it though!
Hi, very nice flute ! do you have the measures ? thanks you
@emilienloriol2228 This was a "proof in concept" type video, I have hundreds of other videos on how to make flutes including measurements!
@@BlueBearFlutes Oh ! Thank you !
Hi Friend , Love watching your stuff. Total respect to you. One question, what size cove router bit is that? Respect to you from the UK.
Thank you my friend for your kind words! It is 3/4" diameter 3/8" radius.
Hey Charlie, Do you remember the video with you making a flute from a bamboo cutting board? Well, I made one the same way too after seeing your flute and how well it turned out. Mine turned out great too until I dropped it and it broke in two like magic along the joint. I have learned that mineral oil does not like some glues and you first need to sand the surfaces. That was not the bad part, I had just given it to its new owner. The look on her face was priceless. I laugh so much, if it had not been a good friend that was now it's owner there would have been trouble. Nothing a hit on the sanding belt and some glue didn't fix, but how funny. See what your videos bring, fun and laughter. The flute you just made sounds fantastic. Thanks my friend. Tom
Great story my friend! Thanks so very much for everything!
any plans or list of materials or other information to build one.
Yep, I have hundreds of other videos as well as a book. I'd suggest checking the videos first. 😁
Does the $7 estimate account for the 3,000-5,000 dollars in shop tools? Plus, your music is about to make my head asplode.
Weak. I tell you what, go watch two or three dozen other videos of mine and at that point out might accept an apology.
Also, if I had made this flute with only a pocket knife (like in my other videos), you could say "the $7 doesn't account for the hours and hours of skill and knowledge it takes to do this" 🤪
Well done sir
Thank you my friend! Please check out some of our other videos on Native American Flute making and playing! (don't forget to subscribe)
Just curious why do you burn in most of the holes and stuff?
Actually a couple of reasons. The first reason is it's the most convenient way to microscopically resize a hole. The second reason is because cauterizing the hole stops it from being able to absorb or release moisture which will prevent it from cracking in the future. There are other reasons that I burn the tracks into flutes.
@@BlueBearFlutes interesting thanks!
Super glue? Or sonething else? Any reason why you wouldn't use a stronger bond like contact cement?
Perfect!
Love it
Hi Charlie! What’s the name and model of the router bit you are using here?
Hey, sorry if I missed any of your other comments. I have been on a short sabbatical. I do mention it and several other videos and I'm surprised that you haven't come across that yet. Sometimes it's easy to miss that. This bit is called a flute or Cove and is 3/4 in diameter although they usually measure them by the radius which of course it's 3/8. Doesn't really matter what brand you buy and there are several on the market. These measurements are of course in standard however you can still find it under its metric counterparts all over the world.
@@BlueBearFlutes Hi, thank you for answering. Yes you probably mansion it many times and I was not attention to that detail but now I know 👍 The 3/4 is 19.05 mm and 3/8 is 9.5 mm and that’s maby to small for a full size flute, the 3/4 seem to be the one I will choose. I think I will buy a portable router machine instead of table router because they are way more expensive. Hope to see more videos 😃👍
@JosesGarage101 hey, also sometimes the bit is called a core box or a cover bit if that helps. 😁
@@BlueBearFlutes yes thank you very much 😃👍
That's an amazing instrument and beautifully made!
(I hate to be "that guy", but on the table saw, please push the wood right through past the blade... A couple of times you left a loose piece flopping around between the blade and the fence, and you could have had a nasty kickback! I just don't want to see you get hurt.)
Yeah that's the sound I'm looking for.
And yet we have even more videos! 🙂 Thanks and thanks for watching!
Is this a F# tuned flute?
@@jimschutz8765
it sounds like it is, and fluttering around A and E. 🤔 maybe I should have said fluter'ring instead. 🤣
Thanks for all your videos. Just a question though. Why are you using 'for metal' drills instead of 'for wood' drills? The tips are different between the two.
HAHAHA! I'm surprised this question hasn't come up before. I mentioned way back that I like bradpoint bits, but the bits I currently use come in a package which says "wood, metal, plastic". Think I need an armchair in my shop though, this is too much work making flutes!
@@BlueBearFlutes :) I'll be trying it for my self in a bit. I ordered the book & kit a few days ago :)
@@BlueBearFlutes quick image search.. i an talking about this type of tip: www.woodtoolsanddeco.com/en/auger-drill-bits-for-wood/10459-set-of-5-wood-drill-bits-456810-mm-with-hex-shank-8719762707196.html
brother Charlie, please tell me what mix of oil do you use for wood finish? 🙏
These days I prefer mineral oil, peppermint and tea tree oil.
@@BlueBearFlutes ❤️
Okay!
I rummaged around in the wood shed and came up with two beautiful pieces of bamboo.
1st piece. 30" , 3 1/2 sections, 8" between node's . 7/8"id, 1 3/8"od, 1/4"wall. crazy straight.
2nd piece. 25", 2 sections, sealed on one end. 3/4"id, 1 5/8"od, 7/16" thick wall.
Not as straight.
So these will be my 1st attempt at this craft. Now to search through your gazillion video's. Lol that will be the hard part. 🤣🤣
😁
Any tip to avoid mould inside the flute?
Tea tree and peppermint oil. Thanks for watching!
@@BlueBearFlutes Just realized that my flute is full of mould in the blowing hole. I made it using a river cane, so is easy to clean. Any advice to remove it?
Sounds good..!
I need this but dont know where to buy
Did you by chance see the introduction to this video?
Yeah I saw it but there was no audio just music
@impossiblevines4985 In case you didn't get the response I sent on your other post, it is:
bluebearflutes.com
Do you sell these flutes? I thought about buying one but for $7 I'm from Brazil and I don't know how to buy it
bluebearflutes.com
Does Teak grow in North America?
That's a great question! Just at Walmart! 😁
could you please share the size and measurement of that flute
This video is more of a proof in concept and for that reason I did not share the measurements. I have hundreds of other videos making particular flutes, specific sizes, individual keys and offer the measurements for those. ua-cam.com/users/bluebearflutes
what finish did you use on this teak flute. What finish do you use regularly. Thx man
Maestro...además de hacer tan increíble flauta, por favor suba las partituras de esa música ensoñadora...que lo mejor sea para ud y su familia...hare krishna
awesome
What size round nose bit are you using on the router?
This video was more a "proof that you could do something" video not necessarily "how to do something". If you check out my videos on how to make flutes, I usually mention the router bit sizes in those.
@@BlueBearFlutes I will do just that. I'm researching native american flute making for my first attempt and making one. So far your videos have been a great resource. I'm going to subscribe. Do you have a website with a forum for flute making? Something I can ask questions or advice on?
@@steadfasttherenowned2460 You can do that on Blue Bear Flutes facebook page. Keep in mind though I have HUNDREDS OF VIDEOS on how to make Native American Flutes so if you have a question, there is already an answer. So if you ask a question on my facebook, someone will usually reply with a link to one of my videos.
@@BlueBearFlutes no worries. Im a custom solid wood furniture maker and finisher by profession. Any questions or clarifications I may ask for, will be worth answering and only after scouring your videos. Any advice I may need will most likely be about the fine nuances and advanced tricks of the trade.
Thank you for responding. I'm looking forward to this endeavor.
@@BlueBearFlutes p.s I have sent a request to join the FB page. Thanks again.
WHAT TYPE OF OIL ARE YOU USING TO SEAL AND FINISH THE FLUTE
MINERAL/BEESWAX - I'VE GOT SEVERAL VIDEOS ON THAT.
@@BlueBearFlutes Looked through your list of videos and one on finishing techniques did not jump out at me. Could you provide a link. Thanks.
You are the Native American flute-making God
Hahaha thank you my friend! But am I a good god or a bad god, that's the question!
@@BlueBearFlutes If this is up for an open vote, I'm kinda thinking the mischievous type like Loki. Pan had best watch his back now for that top Flute God rank.
@@davidmurphy6884 you read my mind! Loki was my favorite. Made me mad when they took his name off of saturday for a perverted roman diety.
@@BlueBearFlutes Good or bad, I don’t care. After my first total failure of a flute, you’re the God I’m praying to when I get to the track area on my second
@@pcpjames 👹👾🤣🤣🤣
Like chinese fusion voice 😘😘
Che legno hai usato?
@@padovanimattia3255 "Teak" - Proviene dalle isole del Pacifico.
Great sounding flute, but I really missed your talking about what your doing. Please keep telling us how. Just being honest with you. Skip
There will be more videos like that soon. (Not necessarily next 🤔, but soon) Thanks my friend.
I agree...
That's what I was hoping for!! Still a good video though!
Hermosa
SUPER
Thanks!
I tried to order your Flute making book like 2 weeks ago through Amazon?
still have not received! RuNNING LATE? Are you out of publication>>? Dennis Sigala
HAHAHA? Amazon has you so well trained that you are upset after 2 >> WEEKS?? Why didn't you publicly post this on one of Amazon's youtube videos? Should have bought it from my website! Would have received it already. >?
I would love to have your flute, but I'm in Italy, I spend a lot on shipping and taxes. Maybe a repaired flute of yours, because it had a cosmetic defect ... a used flute ...
Have you checked our prices and shipping costs yet?
@@BlueBearFlutes In Italy we are under dictatorship: green pass. Many of us are not paying the monthly salary, we are without salaries. Unfortunately I can spend very little, I would love to have a flute that has inside your Soul, but I cannot spend
@@PasqualeGalasso that is no problem my friend! I hope that the world comes to its senses soon! I'm so sorry about that.
@@BlueBearFlutes ❤️
Спасибо Вам за любовь к N.A.F. и любовь к музыке! (rus)
Luar biasa👍👍👍
terima kasih banyak-banyak! sila lihat video saya yang lain!
@@BlueBearFlutes ok 😁