How To Make 3D Printer at Home | Arduino Project
Вставка
- Опубліковано 15 бер 2019
- How To Make 3D Printer at Home | Arduino Project
::::::: Want To Buy Writing Machine For Your School or Science Project ? ::::::
Watch Below video to Buy New Writing Machine or Parts From me.
• Writing Machine Robot ...
WhatsApp on 7698915121 to place order of above link writing machine.
Buy prototype PCBs at ALLPCB
www.allpcb.com/P13
In this video, I make DIY 3D printer using Arduino Kit and stepper motor. Using this 3D printer you can make any object using gcode file from your computer. For making this you need to install cura , xloader and pronterface software.
This project can be use as your college Project in the science fair.
In this video, I introduced all parts that I used to build my Homemade 3D Printer and complete Build Process of Arduino kit.
Best Link For Materials (World)
3D Printer Arduino kit goo.gl/7s97da
Hot end goo.gl/g34WCN
Extruder goo.gl/syE4sV
Stepper motor goo.gl/VC5zan
12 Volt 10 Amp Power Supply goo.gl/owVopR
PLA Filament goo.gl/BMPu4p
Best Link for Materials (India)
3D Printer Arduino kit amzn.to/2TEnH5I
Hot end amzn.to/2TDUlo5
Extruder amzn.to/2Oay9vz
Stepper motor amzn.to/2XVddgG
12 Volt 10 Amp Power Supply amzn.to/2Y3QhMc
PLA Filament amzn.to/2HqK2gp
Music :
Track : Disfigure - Blank [NCS Release]
Watch : • Disfigure - Blank | Me... - Навчання та стиль
first DIY video i have ever seen that doesn’t use tedious amounts of hot glue
Yea
just cold glue
Yes
Still managed to use a syringe thing though. Lol😂
hotglue would have been much better, this fucking idiot use superglue or contact glue on stepper motors, that's just insulting
Everyone watches DIY videos but never makes them. XD
95% aren't make but 5% wanted diy projects to watching videos and making
I made this. Gotta say, pretty impressive!
Maybe
well i do stupid
@@funnimations7628 you what now!
Imagine you make this printer, then from this printer you print out the parts for a bigger printer, then from that you print parts for a bigger printer until you can print like a 1 meter wide project. That's innovation. Anything done by your self is the best cause you know its all your effort and hey, CUSTAMIZATION POSSIBILITIES ARE ENDLESS!!!:p
Edit = thanks for providing links to stores in india mate, really appreciate it. :)
that is exactly what i am doing. 🤣
At a meter, the use of glue and inaccurate measurement of parts is likely to produce a large printer that breaks down quickly and doesn't create accurate prints.
Honestly, I will never try to do this 3d printer at home, BUT, this video is still freakin' amazing.
You're right.
Why?
@@JuanMendez-zv5qd its only good for building trash
@@dasig3010 wdym im confused
@@cosmothecat8626 I mean, it's got pencils and drinking straws for the axis guide rails. Those are going to bind like crazy. It's an acceptable 3D printer if you've got literally nothing else but whatever you washed up on a deserted island with, but you could get an i3 kit for less than this junk printer's BOM. Oh, and the i3 would give you a heated bed and a print area larger than a postage stamp
Then use the thing to print out a bigger 3d printer
Either your avatar is overused or I see you everywhere
> Then use the thing to print out a bigger 3d printer
That's called a RepRap.
@Frank Blackcrow - That's why you print multiple peices and then attach them together.
Woah lol😯😧😧
@Frank Blackcrow shut up nerd it's a joke
That electrical wiring gives me the chills! Interesting build!
Best project i was planning to buy profetional one but its so simple to make u made me understand ...Youre awesome man
Pure genius I hope your craft! Keep it going! 😌👍🏻👍🏻
When you need a 3D printer to do your own 3D printer LOL
Worked for me.
Haha, ide yg bagus. "Membuat printer 3D dengan printer 3D."😂
Yeah you need things from. D3 Drucker to make a mini 3d Drucker very nice
Yeah
@@0Leitwolf0 *3D printer kein deutsch bidde 😜
If possible it's better to assemble extruder, so spring has a cap bolt pushed in one end. Then a bolt through the extruder arm, pushes into the cap bolt. Allowed spring tension to be adjusted.
Yes
Astonishing then make a mind controlled drone🎉🎉😊
Can we take a moment to appreciate how easily he makes it look?!?!?😃
😂
this guy is so talented!! i still cant believe he managed to finish it in under 8 minutes and 30 seconds!!
The world needs more people like you.
Loving that “this copy of windows is not genuine” notification
Jack Stephen i’ve definitely gotten that on real copies of windows before but my guess is that’s not the case here lmao
Yeah, I actually laughed out loud 😂
Adds a little genuineness to the diy
I got scammed about a windows product key. Now the key is locked and I can't even get a new one
7:46
Might make designs to 3D print a printer parts using my 3D printer then just buy the motors and stuff 100x100x100 ❤ Love this video
Congratulations on getting such a machine to print, may I have such luck
Amazing Iove you design really nice mini printer good job I bought parts to make my own mini 3D printer🙃👍👍
Whats the total price?
Is it working ?
Were you able to complete it?
youtube.com/@newmuslimss
No please don't do it
Caption should be like : *How to Assemble a mini 3d Printer*
Question : how to make a 3d printer ?
Answer : purchase a 3d printer then disassemble it. then again assemble it and bingo! you have a new 3d printer .
Oh enjoy 😊👍
yeah ._.
Thank you Creativity buzz!!🙏🙏 Without your help we (our group) can't be able to complete our project.. although it was very fun and challenging task.. but we have managed to do so...all credit goes to you.. Much Obliged💯💯
Aashay.. Please how do you do the programming or conversion of the file to HEX file
Can you tell the code you uploaded in Arduino by xloader
@@baruwaola7458 did you get the code ?
Can you send the Arduino programming part?????
Disculpen alguien me podría decir los materiales
tysm, I can't believe that it was so easy to find this specific channel .
thanks to youtube!
Is this easy?😂
*Thank you Bro I really searching youtube to make this* 😃😃😃😃
I like how he uses 3d printed designs to make a 3d printer
That was fantastic!
I think it’s awesome👏🏾👏🏾👏🏾 really want to make it
Fantastic project but most people would not be able to do it. Anyway, you proved it can be done :)
Yeh
Yo hice la mía basada en tu modelo, me quedo muy parecida (por no decir igual), gracias, desde hace ya casi un año, con ella imprimí las piezas de una impresora de 500 x 500 x 500, y ando a la espera de que me lleguen las partes metálicas, de nuevo gracias.
Hola amigo me puedes decir cuánto te costo ..la lista de piezas y dónde comprarlas
@@yeison-s7972 todo lo compro por AliExpress, pero inicialmente me tocó hacer como en el video. Cosas pegadas, y rodamientos incrustados en acrílicos.
@@luisangelnova2792 oye amigo yo igual la ando haciendo, justo empecé, me podrías pasar las medidas que utilizaste porfa?
My hands just pushes my fingers with +Mesomeric effect to like your video⚡⚡⚡
As Picard might say, "nicely done". 👍
You know he puts alot of effort into his channel when he works up until 5 am
Buy kit and parts at 80% price of Real 3D printer, do crappy frame, reduce print size by a lot, pay for extra materials (not included in 80%).
LEGIT
BIY, buy it yourself KKKKKKKKK
I am made this 3D printer and i am so happy you are not understand but i feel so happy
Thanks for this helpful video!...
how about the code ?
Esta super cool, eres muy creativo :D
This is the second random 3D printer made from scrap I’ve been suggested today 😳 UA-cam knows I’m broke 😅
ua-cam.com/video/G2A2SHLnNoM/v-deo.html
this is the best of the DIY mini printers since it has larger XY- space (z is not so important.
But i think this can be done with one motor on the Y axis .
(when you change the geometry, i mean 3-4 bushings instead of 2 , and the driving motor in the middle)
If you are missing some parts, here some ideas:
The Steppermotors can be fount in defective printers. Belts+Pulley can be found in Scanners.
Couplers can be made from hose or shrinktubing
and the 8mm rod could be realised with a 8mm metric rod + nut instead
Hi, I think printers use normal DC motors instead of stepper motors.
And yes a single motor on the y axis could be a really good idea.
@@hamzajamal5661 stepper motors are used to immediately change directions, which happens specially when u are printing something like a circle. Normal dc motors may run at their max rpm and switching directions is hard here. Although you can convert a stepper to dc motor and vice versa, its a pain.
Just wish the was an actually good tutorial on how to build this
You know, with a person, explaining things and properly showing everything and giving information
Bro, z is not important when it comes to homework writing machines, but this is a 3d printer, so z is important
Very interesting idea and cheap project, I must think over this project because very wanting to have this printer at home :)
Thank's man, I really wanted this!
We need a 3D printer to make a 3D printer!
And dude, common you skipped the main parts, programming of the aurdino, aligning of parallel stepper motors, intricate designing of parts.. I wil give a better option.
1. Buy a 3D printer.
2. Open it up.
3. Turn on your camera.
4. Assemble it.
Taaddaaa home made 3D printer.
Also, the parts in the description add up to over $100.
You can buy a mini 3D printer on Amazon for $200 (which you might need anyways to print parts for the shitty-inaccurate-undurable printer you're about to make).
Won't be surprised if the life cycle for this one is less than 1/4 of the commercial one. Glue? Are you kidding me?? GLUE??????
@@mauricepower6361 wise words.
The problem with FDM 3D printer is stability.Buy the cheapest one available and build a sturdy frame and you will get decent printer
Give this man a bud please 🍺
but you cant take off parts from 3d printer and programm it to be robot or something else
This guy is a genues you are a legend bro
best D I Y 3d printing thanks for showing it god bless you best making i think i can make it 😊
*bohut bohut hard....👍👍👍👍💥💥💥🔥🔥🔥💗💗💗*
For the stepper drivers, use something like TMC2209 to not have to wire up endstops
Nice tip!
Wish I knew what you are talking about but since the video is such a garbage tutorials I didn't actually learn anything about how 3d printers work and building this 3d printer is gunna be a pain ans probably coz so many unexpected problems that I'd have to give up and have wasted money on the parts
It's not a garbage tutorial. You just don't know what you're doing. This video is meant for people who are in this field.@@grimreapybones2875
@@grimreapybones2875ua-cam.com/video/qub5chyIQ0s/v-deo.htmlfeature=shared
Well done bro, I am surprised and amazed. huge like .
Yeap
Bro, this printer is awsome!💕
ua-cam.com/video/G2A2SHLnNoM/v-deo.html
Thank you for making it . I ask you to do this
Congratulations.!! You Have a new suscriber😉😉
Thank you.
You are amazing. For those who want to know further details about this project go read the description of the video. I'm subscribing
Awesome 👌 Great ideas 💡 👍
Hi,
I have a question.
Is there a drawing with the dimensions of the 3D Printer? (eg.: the wood component)
Thank You the answer!
No answer sadge
Its in the description
There is no description or any details about the measurements.. If the measurements are provided it would be good..
I agree with you
Ya your correct bro
Me too
Bhai pehle jo videos mei likha aa raha hai vo padlo
Ya right
"Impressive Most Impressive" well done.
Thank you for this video, is very interesting
*CUTTING (DESIGN IN DESCRIPTION)*
??? Where???
.
Yeah I would like to know where the cutting file is at.
@@MrKritterh thanks
Don't build this. The incomplete parts list in the description adds up to around $100 by itself. You can get a real 3D printer like the Creately Ender 3 for like $150.
Ben Phillips where at? In amazon their going for about 230 US dollars
@@miguelc5430 check out xvico pioneer on ebay, they are about 140-150 and seem to be a pretty solid ender clone, I've watched a few reviews on them and they seem to be decent for the price.
any types of stepper motor can use to
make a 3d printer
Woah! Pretty nice bro!
Cool levelling!
Hey man, nice video! Is there any way we can get a more detailed explanation on how to upload the file to the printer?
he showed in the video
He used an usb cable
I made mine based on your model, I stay very similar (not to say the same), thanks, for almost a year now, with it I printed the parts of a 500 x 500 x 500 printer, and I am waiting for that the metal parts reach me, again thanks.
bro took diy to next level
wow......!.it"s amazing.
like for me
Bro can we pause the print and restart when required.
It looks pretty nice to do but I think it's too hard for me to afford those components
bro you are a genius.... i really love your content...
MIND BLOWINGG
All of printer: Wood, hot glue and plastic
Extruder: High end all metal...
I seriously laughed. Awesome build.
no. its just clone of e3d v6. you can buy on amazon for around 15 euros
This is the strangest video I have seen in quite a while. You go out of the way to purchase stepper motors and bearings, rods, power supplies etc etc and then proceed to use pencils and pen caps, 3d printed parts and needle tubes?
Wow 👌 👏 😍 👍
Excellent project!!!
Me: mom can I have 3d printer?
Mom: no we have a 3d printer at home.
3d printer at home:
I laughed my ass off at this
I asked my parents for one, but I said I could use it for my electronics GCSE and take it to university to use
Nice project. Dimensions would be appreciated.
Watch me you will know another level.
@@xzkjerry8576 yeap bro I know you have make lot of things from wood right!
And love it bro
It's an amazing work 👌👌👌👌
What a project .. 👍 ..
0:22 to made 3d printer … i must have 3d printer … 🤔 …hmmmmm …but if i have 3d printer … why i need DIY 3d printer !? The secret of humanity …
"Hey how we gonna mount that stepper motor? " "yeah no, just glue it to some wood, that will do"
This is simple and elegant than other 3d printer design ! Just like Newton's law of Gravity ! What do we need more ! Thankx bro 👍🏻👍🏻😎
Nice build!
so basically buy all the part of a normal 3D printer, but install it on the most ghetto frame ever.
Legit
Deffo a eBay kit 😂
You should check out the price of a 3d printer. Then check out how much he spend on parts. Then you will appreciate this sheet
@@WilliamEmzy you can buy a 3d printer with less than 100€. And it's much much bigger and better
@@specy_ wait what???! what is the name and model
@@WilliamEmzy anet A8 105€ , you can get an ender 3 too for 160€
TONY STARK BUILT THIS IN A CAVE.
Lmao
"I'm not Tony Stark."
WITH A BOX OF SCRAPS
@@Harry-is6vn with a bunch of animal bones
If tony stark would have build this in a cave, it would be so Advanced, if it would be just a bit smarter, it would write a book...
that was really cool
I made this. Gotta say, pretty impressive!
That motivated me to make it too..
Which code did you uploaded to the Arduino by xloader?
I love how it yelled how hes windows is legit...
Lol didn't notice that
With this McGuiver printer, you could "print" better parts to make a larger and more sturdy 3d printer and re-use the stepper motors and controller.
thats the plan :D
What price of printer?
What soft ware are you using? Marlin, Klipper, Rep Rap.ect
Wow! Super Cool 😎
How to make a DIY 3D Printer:
Step 1: Buy a 3D Printer
Step 2: 3D print a 3D printer
Step 3: You’re done!
Well I mean you can do this but it'll still cost you about 190$ for parts and enough filament to print the chassis but then you gotta figure out how to return the previous printer and be happy with a smaller build volume and poorer resolution
And this is the RepRap project: Build a 3D printer that replicates.
Wooden components, and humidity.I wonder how long it would remain level?
simply print its own parts and keep replacing LOL !!
un muy buen trabajo y muy buen video
very cute smal and funny projeck .. i like it :)
Bro please upload to how to make a normal printer
I think that is rubbish tutorial, without any reasonable explanation.
I made one for 30k
@@dhanakodimani4783 I can make in 10000
@@vishalgaurav4411 top end.
Tmc driver + 32bit + much more
@@dhanakodimani4783 oh bro, may be you are pro. I just had a normal build using ramps. BTW, what's 32 bit ?
Show the project but you should put a file with diagram, code, assembly.
Just watching the video do not give to ride
i dont want to watch this video but its so godamned good i cant stop
👌👌👌👌that was perfect
Which app do you use for the leveling ??
It’s a default iOS app
Hola, nesecita el listado de los materiales. Felicidades que buen projecto.
I might try this myself
Very nice home made printer
Windows is not genuine ! :D by the way great creation there, respect ;)
1st view 1st comment
You are genius man
Just..WOW...!