It’s actually a very well written and comprehensive book ua-cam.com/users/postUgkxb2mhCug-GkCWrq69Ce2I0nM0D4QpxAqu . I wanted to pair this with an updated book on local codes to start planning a post-retirement dream shop. I think I have just about everything I need between the two. The extra plans available for purchase towards the end are priced almost as much as full home plans, not little sheds however.
Thank you!! We are getting ready to replace all the windows in a 1950's farmhouse. I keep asking which windows are best and I've gotten lots of different answers. This made my day much more productive.
Purchase the best that is affordable to you. By far wood will maintain the façade of the home, historical bottom rails are important, eliminating Andersen products. warranty is the best in wood, as the sash tilt and are easily replaced. Purchase the best you can afford and they will pay off.
I flip high end houses houses. Nearly every wood window with any age I've come across has been rotted, splitting, and peeling. Does Vinyl look expensive? No... Does it last? YES!!! The coating and the sealing material between the glass "sandwich" is what seems to make the difference. Cheap sealing material leads to "fogged" windows. Replacing just the glass sandwich isn't very expensive and on a vinyl window is super easy. Most of this is sales crap!!!! Colored window frames are "in" now, but white is timeless!! White Vinyl trim is also easy to come by. See a pattern??? It's not hard to design a very nice house with white trim.... Then sit back and watch your neighbors repaint and replace windows!
Grande1124 I just installed some very decent vinyl windows in my house. The brand of windows I used is called Sunrise. They look sharp and mine are in a wood grain finish. I bet most people who look at them could not even tell they are not real wood. Anyway, I replaced some aluminum clad wood windows I had in my house. The windows I replaced were installed about 12 years ago. They were starting to rot at the bottom of sashes, and I had mold problems on a few bottom sashes on double hung units. I also saw a video that was pretty interesting about how modern wood Windows are designed to rot out. The guy who made the video explained how moisture always wants to equalize with exterior air (especially during winter), and the newer vinyl and aluminum clad wood windows prevent that process from happening. The result is that the wood frame of the windows and sashes start rotting out. I am sure most homeowners do not re-stain their wood windows every five years, and their windows are ticking time bombs.
I've had my low E vinyl windows from Window World for 10 years now, no issues except the glass on one of the windows discolored and it was replaced free of charge. If I was going to get a better window, I would be focusing on the durability of the glass vs the framing. My next house I would like to get Hurricane windows with impact glass. Keep air from infiltrating your home is the best way to prevent it being destroyed in a bad storm.
Hey Matt, first, I have to say.. I love the show. Like yourself, I am a building science nerd! I'm obsessed with it. However, I have to ask, why in the world would someone use a Fiberglass product? The finish is painted on and will require painting in the future to protect the fiberglass from UV delamination. Maintenance free is what we want. And what happens when fiberglass is left untreated, because the home owner doesn't keep up with the maintenance??? The fiberglass strands will be exposed to the elements. And in a freeze thaw condition. It will break down the fiberglass frame.. and when its exposed to direct UV. It will also deteriorate the frame. Clearly a recyclable composite it going to have the best value. Because it will be stronger than vinyl. Have the looks of a wood window, but maintenance free!!
Marvin does not paint the surface of the fiberglass directly. It is wrapped in an acrylic capstock and has a depth of color that resists UV fade and protects the fiberglass stranding from direct exposure. This however is not true of fiberglass windows from Pella and Milguard. A freeze/thaw will break down a wood vinyl/composite Fibrex faster as that material expands and contracts 4x as much as Ultrex Fiberglass.
I could tell this was an old video guy the way you sounded. Your much smoother now. They make hurricane windows out of vinyl, they must of improved them since you made this. You need .3 or better on the frame to write them off your taxes. I believe only vinyl meets those numbers. In south Florida they pretty much offer aluminum or vinyl
the thing I recommend is not going to the low end of any manufacturers windows unless you have rotting out old windows and cant afford anything else.. I have found with all the reputable manufacturers they have good and bad windows in Vinyl, composite, or wood... If you can afford the marvin wood ultimate wood or andersen woodwright, i say those are the best out there... im not sure why anyone installs aluminum windows.. even with the "thermal break" there is still a portion of the aluminum in contact with the outside and inside... anywhewre in the south where its constant moisture / coastal areas I'd put in a fiberglass
Thank you Matt for another great video. I am, however, going vinyl because of cost and what I believe is a better thermal or U factor per unit on the Preservation line of windows which has triple panes with two of those having the Cardinal e366 glass (I believe). Modern high end vinyl window with fiberglass reinforcements are attainable for the average household and a very good window if not exceptionally beautiful. I am in the Kansas City area.
Appreciate the kind comments! I understand the place vinyl has in the market and like all things some brands are better than others. There certainly are some good Vinyl windows that provide good performance at a reasonable price point. If you're buying triple pane windows you are certainly buying some of the best performing windows in the market today. I wish you the best in your endeavors. Matt
I live near Chattanooga TN and will enclosed a screen porch (current floor is 5/4 planks) with 40 foot screen wall on outside wall that will have windows and a door with two side lites. Do the big box stores have anything I should consider? On the floor I will caulk the cracks between the 5/4 planks, add sleepers and advantek to raise height to level inside house (will extend current 3/4 oak planks throughout house onto screen porch. Want it to look like house was built this way and don't want someone to say "oh, I see you closed in your screen porch". Have two french doors from living area that now opens to screen porch. Will remove french doors when finishing job. Current windows for house are Anderson vinyl and think I will use something similar. Thanks for any comments.
What about triple pane windows? I have one manufacture telling me to have both voids filled with argon gas and another insisting that filling more than one chamber is a waste and doesn't yield any results. The the distance or spacing between the panes make a difference?
Matt, You have sooo much good information for us consumers...things that we would NEVER think of. Please....sell your home building business in texas and move to the midwest where its really cold and give us all good tips on how to build houses in cold climates. hahah long shot i know, but thanks again.
@@melissamybubbles6139 This was golf ball size hail that caused the damage. We normally don't get anything larger than pea size and it held up to all the smaller hail. The weather the last several years has brought crazier weather. First time we've had hail that large.
Hey Matt I know this is an older video and windows have come a long way. I work for a German window and door company that installs German windows and doors here in the US. I’d love to share with you what a we’ll engineered window really looks like. Im very new to your channel but love the build science👍🏻. Let me know I’d love to share. Henselstone Window and Door Systems.
I have many casement windows, and 3 very large floor-to-ceiling picture windows. The picture windows do not open, of course, but how do you rate the locking mechanism on the Marvin casement windows/versus the Andersen casement window locks?
So Marvin is better than Anderson. I have to choose in the next few weeks which company to go with. I’m willing to go with Marvin even if they cost more. Anderson 400 series versus Marvin?
Fiberglass tends to delaminate in hot dry locations. Also, you are incorrect about vinyl. Many manufacturers provide a lifetime frame warranty for vinyl windows and they are very energy efficient. Jeld Wen is a good example. I have installed vinyl windows on several houses in Arizona and I have never had a call back for failure of the vinyl frames.
We are building a new home in an historic preservation zone. They insist that we use all wood windows. This blows our budget out of the water. We’re in Tucson Arizona and it’s been my experience that all wood windows in our extremely hot and variable climate do not perform well. If we do indeed move on all wood windows, do you have a recommendation for a brand gets the job done but won’t kill us on price? Thanks for your time, great video.
Yeah do not do it! Anderson 100s should be good enough? I know Sierra Pacifics seem to score well on price and function. Marvins I am told are expensive and slower to get.
1% loss a year of argon, industry standard. All the glass have 20 year warranty Andersen, Pella Marvin all get Cardinal glass, so many different types low e 3 is current low e from 20 years ago is obsolete, coatings matter Low e 3 SUN Andersens is what I have flawless, got 29 years out of old Andersen Casements, Andersen low e now changed sashes (glass in factory wood frame) use original hardware 31 sashes changed now low e 3 SUN looks great, sun blocker, low e 3 low e 266 is more sun blocker SUN versus Smart SUN from Andersen SUN blocks a bit more heat from the sun, with a nice tint, privacy on 8 ft slider doors, nice blue grey tint, it actually lets in more visible light on new SUN versus teh old Sun bronze low e 29 years of improved glass....
have to say.. I love the show. Like yourself, I am a building science nerd! I'm obsessed with it. However, I have to ask, why in the world would someone use a Fiberglass product? The finish is painted on and will require painting in the future to protect the fiberglass from UV delamination. Maintenance free is what we want. And what happens when fiberglass is left untreated, because the home owner doesn't keep up with the maintenance??? The fiberglass strands will be exposed to the elements. Furthermore I am curious about investing in Dako Windows USA. What do you think about them?
I find it interesting you showed Andersens lowest grade composite. It is night and day from The Renewal by Andersen product. Plus Smart sun glass is completely different than 366 glass. Although made by Cardinal it is made to Andersens proprietary specifications. Kind of misleading.
Grande you’re a moron. Greg makes a solid point. Fibrex is a composite made of wood and thermal polymers and you want me to believe that plastic and 1 mm glass is better? GTFO. You don’t know shit.
Hi i have an idealCombi window where you press down the button to open or close but it's halfways locked now i can't open it's not fully closed ive been trying to open unlock it no chance since a week any tips , please ?? Would be great thanks a lot
Quick question for you Matt. I know this video is 6 years old but still today most of the energy efficient windows have that greenish tint. Do you know any brand that have a completely transparent glass?
@@buildshow Digging back through some old videos to find something for a replacement project I am working on with 4' wide windows and I need operable for egress. The only thing I am finding is tilt turn. Contemporary house, would love your opinion. But that said- Don't you have JeldWen in your new house? What changed?
Great video, thank you. We are considering wooden window frames to replace the beautiful-but-beyond-repair original steel window frames in our home. No other windows seem to offer or come close in architectural style and color options as wood windows. I learned that wood windows are the most expensive - are there options to chose cheaper wood to make it more affordable?
@@patricecomedy Well I would like to help if I can, that is if you are still in process of doing so. I can offer some advice if you are interested. What area of the country are you? what is your house type/windows you want to buy? contemporary, colonial etc.. how do your current windows operate? You mentioned you want wood, do you plan on painting or staining them, or would you want them from the factory finished?
Matt, thanks for posting so many videos. What are your thoughts on WindowEstore windows? Im a DIYer looking to replace my own windows soon. Both of you are based in Austin, I figured you might know a thing or two about their product. Thank you in advance.
I'm leaning towards Anderson windows. I have a question, my current windows have storm windows, after having new windows, do I still need to use storm windows? They do serve a purpose of drowning out sounds from a busy street.
Elizabeth Hereford Did you purchase windows already? If not, I would recommend the triple option if you are contemplating getting storms again and the price is comparable. Those will be easier to keep clean and will be easier to open and close as you do not have to mess with the storm window. I just installed triple pane windows on my house, and they really do cut down on road noise. Of course, you can do a few windows in triple pane. Windows that gain the most advantage are typically larger or on the sides of the house that get the least sun exposure (north and east side). Other windows you might want as triple pane would be ones in areas where you spend a lot of time as triple pane windows minimize cold air convection drafts. I am assuming you are in a colder climate based on the fact you have storms. You could save money by only doing a few in triple pane. Triple pane windows will not look different from double pane models where as windows with storms will look different from ones without.
I need an affordable window, probably will have to go with vinyl. But I want a dark color frame .. black or dark brown. I'm seeing a lot f it on pinterest etc. I am only finding white, and maybe two other colors. Any direction you can offer?
Reason why they dont offer different colors for vinyl is because its terrible at holding the paint. White or almond is usually the best color you can get without having to deal with repainting constantly. Only draw back of vinyl.
I wish I knew the difference when we built our house. We used Andersen windows and in 15 years they are all rotting away. It was called vinyl clad which we thought they were vinyl but all it was was vinyl paint.They wouldnt do anything about it
Argon might technically be denser, I don't think that's gonna be anything noticeable as far as sound dampening goes. Indeed draining your wallet perhaps. Triple pane should do additional sound proofing beyond than double pane. I was wondering if thickness of pane matter, or distance between panes. Or Frame type (I would think denser frame like wood, vs plastic or aluminum, would add sound dampening).
SIMONTON has a unique sound deadening glass option called Keepsafe glass. Extremely durable vinyl frame with 2-3 times as much vinyl in the frame and superior finish. Best QC in the industry. Research them. Especially the 5500 series. I would put them up against the MARVIN Windows for durability, performance, design and energy performance.
Fenstur windows are a great product. You should really consider them ~ built to a European spec, high performance passive certified .... the only passive certified window and door company made in North America. Solid wood components unlike the Finger joint garbage out there!
as a long time rep of Marvin, Weathershield, Lincoln and regrettably Andersen, the engineered fiberglass unit is the best bet. Pella is poor in my opinion as the series from good to best are not visually discerned and delivers the lowest grades they have.
Matt Risinger Right but I don't know much about this topic. I do see a problem though. Windows still get very cold in the winter. In this age of energy efficiency being important how do we find better ways of insulating windows? We still want sunlight and infred rays in but we don't want the temperature flow.
I've heard the argon eventually and slowly leaks double glazed windows, as the years go by, and that what keeps the window performing, energetically speaking, is actually any thermal layer you decide to put in the glass itself and also the fact that it's still two panes of glass separated by air (not as good as argon but still better than just 1 pane of glass or 2 panes together). I'm not sure about this though.
George Louis If you live in an area with constant extreme cold weather (snow, etc( area, and don't mind having to replace your windows a bit sooner than you would with thermally broken aluminium frames, then a polymer type window frame (either vinyl or the other newer composite types) will be the best choice since it has slightly better insulation values. You also have the wooden option, which may even last longer than the polymer since, nowadays, the treatment has improved a lot. And wood has even better values than polymer (or so I've heard). This is only regarding the frames though. In other words, the frames themselves won't let as much heat escape your house and won't also feel so cold to the touch. Regarding the double glazing, there is glass with insulating polymer layers inside the window itself (on one or more of the glass panes). You should definitely go for that but be careful that some insulating layers are designed to keep the heat out, while others are designed to keep the cold out. I know this seems strange but this is what I read. And then there are other factors such as the spacing in between the panes of glass, the thickness of the panes of glass and, last but not the least, you have the options of triple glazing or secondary glazing if you are still not satisfied, although secondary glazing is more for sound than for temperature (that I know of). Thermally broken aluminium is usually the best choice IMHO because of durability but, in extremely cold weather it's probably not the best choice.
So many people have installed white vynil replacement windows in my neighborhood and the thick frames and ugly corners are hideous in my opinion. I'm thinking about double glazed aluminum thermal break for my house. I like the thin frame of aluminum.
No mention of high performance windows? Triple glaze? Marvin ultimates are your top of the line windows?!? This is a Marvin ad and leaves out many many better performing types of windows.
Fenstur windows are the highest end window you can buy. They are actually Passive certified unlike a lot of passive "appropriate" knock offs. Well worth considering if you can get a hold of them.... they are very busy for a good reason.
What I would like to have u eval r those windows that have higher r value. All those ones u discuss here r still very inadequate n ur stuck with years of the inadequacy. If you build any type of efficient home the next energy consumption is the windows !! Well ??
Dang. . .there sure is a lot of "bonding" and "joining" and "profiles" in some of those windows. Lotsa places to fail in my opinion. Why are doors just a "glazed unit" put into a wood frame and sealed on all 6 sides verses these? I bought 4 Buffelen Doors that are low-e n argon filled, all glass, wood frame obviously, get slammed by every kid in the neighborhood 15 times a day, temps from 0 degrees to 100 and it's been good for 20 years so far and only sealed when we built. . . Hmmmmm. . . Why should I use a very very complicated frame for a window that get 90% less use to achieve the same thing?
Historical profile is most true. But the best you can and realize a salesman tries to add to the specs when not needed. Low E is the most prevalent add which only works against direct sunlight.
Still if the area outside the window is 100 degrees the frame work and the window panes will be important for efficiency. The Argon gas is used to not allow the heat to transfer over easily like clear coats.
the best frame window is wood protected with aluminium rest of frames is shit(for privat homes).for industry,sheops the best in aluminium from Hidro (Norway) rest is shit
Hahaha sorry but yo are not serious at all man. The vinyl that you showed looked like was made on someones garage. I worked on manufacturing vinyl windows and the majority of manufacturers have machines that cut the corners and look fantastic. I think you are biased. You don't like vinyl windows or you are trying to sell other things but please be honest.Fiberglass is better but at what cost. Vinyl is not that good but it's not garbage like you presented it.
thank you for your ''detailed'' answer. you are wrong! if you manufacture the vinyl windows with the right steel reinforcement they are practically indestructible. but there are so few manufacturers out there that do this. for cost reason they cut the expenses on steel reinforcement either on quality or the thickness and the result is that windows bend. i've seen windows manufactured by our factory 15 year old or more ,they looked like brand new and never required service except maintenance of moving mechanisms. so i speak from my experience. now maybe fiberglass windows are better but it depends on the budget you have. of course a Ferrari is better than a Ford but i can't afford a Ferrari.
ii don't like your attitude. you come and comment on my comment when you have plenty of room to write a comment of yours . i have written a comment full of technical details based on my experience. you just say an opinion based on your perception. if you can't stand a discussion don't enter at all. and yes based on your attitude it feels to me like you are a troll. maybe you're not bu it feels to me that way. you write a comment like '' vinyl is just dirty cheap'' ,after i answer you backing up my opinion you answer they are ugly. sorry but i have analyzed value for money ,i have analyzed the technical aspects and all you have to say is they are ugly. as i said you could have wrote this as an independent comment and i'm fine with that. it's your opinion that vinyl is ugly. but you can't comment a post with technical details in this way is disrespectful . or you debate with me full technical mode or you don't debate, of course you could downvote my comment if you disagree.
What vinyl company does this "steel reinforcement" so well? Vinyl is lower end and always will be. Imperiva by Pella/Fibrex by Andersen are reinforced vinyls that compete with "high end" vinyls from companies like Simonton. This guy presenting isn't telling us anything earth shattering, it's just the truth. However, Integrity is a great product but expensive, cannot do radius shape windows that are actually fiberglass, and limited on height since fiberglass tends to twist at long lineal lengths.
It’s actually a very well written and comprehensive book ua-cam.com/users/postUgkxb2mhCug-GkCWrq69Ce2I0nM0D4QpxAqu . I wanted to pair this with an updated book on local codes to start planning a post-retirement dream shop. I think I have just about everything I need between the two. The extra plans available for purchase towards the end are priced almost as much as full home plans, not little sheds however.
Thank you!! We are getting ready to replace all the windows in a 1950's farmhouse. I keep asking which windows are best and I've gotten lots of different answers. This made my day much more productive.
Cinfully Awesome by Robin...Check out other video on aluminum, vinyl & how they fail. I read Anderson 400 are very good.
Aluminum Clad, Vinyl Clad, Window Deterioration THE TRUTH Pella Andersen ....Heres that video.
Purchase the best that is affordable to you. By far wood will maintain the façade of the home, historical bottom rails are important, eliminating Andersen products. warranty is the best in wood, as the sash tilt and are easily replaced. Purchase the best you can afford and they will pay off.
Look at this young Matt R!
I flip high end houses houses. Nearly every wood window with any age I've come across has been rotted, splitting, and peeling. Does Vinyl look expensive? No... Does it last? YES!!!
The coating and the sealing material between the glass "sandwich" is what seems to make the difference. Cheap sealing material leads to "fogged" windows. Replacing just the glass sandwich isn't very expensive and on a vinyl window is super easy.
Most of this is sales crap!!!! Colored window frames are "in" now, but white is timeless!! White Vinyl trim is also easy to come by. See a pattern???
It's not hard to design a very nice house with white trim.... Then sit back and watch your neighbors repaint and replace windows!
Well said!
Grande1124 I just installed some very decent vinyl windows in my house. The brand of windows I used is called Sunrise. They look sharp and mine are in a wood grain finish. I bet most people who look at them could not even tell they are not real wood. Anyway, I replaced some aluminum clad wood windows I had in my house. The windows I replaced were installed about 12 years ago. They were starting to rot at the bottom of sashes, and I had mold problems on a few bottom sashes on double hung units. I also saw a video that was pretty interesting about how modern wood Windows are designed to rot out. The guy who made the video explained how moisture always wants to equalize with exterior air (especially during winter), and the newer vinyl and aluminum clad wood windows prevent that process from happening. The result is that the wood frame of the windows and sashes start rotting out. I am sure most homeowners do not re-stain their wood windows every five years, and their windows are ticking time bombs.
Vynil windows are butt ugly, they should be illegal in middle class and up neighborhoods.
I've had my low E vinyl windows from Window World for 10 years now, no issues except the glass on one of the windows discolored and it was replaced free of charge. If I was going to get a better window, I would be focusing on the durability of the glass vs the framing. My next house I would like to get Hurricane windows with impact glass. Keep air from infiltrating your home is the best way to prevent it being destroyed in a bad storm.
Most windows in Florida have laminated glass. 👌
Hey Matt, first, I have to say.. I love the show. Like yourself, I am a building science nerd! I'm obsessed with it. However, I have to ask, why in the world would someone use a Fiberglass product? The finish is painted on and will require painting in the future to protect the fiberglass from UV delamination. Maintenance free is what we want. And what happens when fiberglass is left untreated, because the home owner doesn't keep up with the maintenance??? The fiberglass strands will be exposed to the elements. And in a freeze thaw condition. It will break down the fiberglass frame.. and when its exposed to direct UV. It will also deteriorate the frame. Clearly a recyclable composite it going to have the best value. Because it will be stronger than vinyl. Have the looks of a wood window, but maintenance free!!
What type would you buy to replace old rotted wood windows ?
Marvin does not paint the surface of the fiberglass directly. It is wrapped in an acrylic capstock and has a depth of color that resists UV fade and protects the fiberglass stranding from direct exposure. This however is not true of fiberglass windows from Pella and Milguard. A freeze/thaw will break down a wood vinyl/composite Fibrex faster as that material expands and contracts 4x as much as Ultrex Fiberglass.
matt is there an updated video on this topic you can direct me to?
I could tell this was an old video guy the way you sounded. Your much smoother now. They make hurricane windows out of vinyl, they must of improved them since you made this. You need .3 or better on the frame to write them off your taxes. I believe only vinyl meets those numbers. In south Florida they pretty much offer aluminum or vinyl
the thing I recommend is not going to the low end of any manufacturers windows unless you have rotting out old windows and cant afford anything else.. I have found with all the reputable manufacturers they have good and bad windows in Vinyl, composite, or wood... If you can afford the marvin wood ultimate wood or andersen woodwright, i say those are the best out there... im not sure why anyone installs aluminum windows.. even with the "thermal break" there is still a portion of the aluminum in contact with the outside and inside... anywhewre in the south where its constant moisture / coastal areas I'd put in a fiberglass
Matt!! So close to 1 million subs!
Thank you Matt for another great video. I am, however, going vinyl because of cost and what I believe is a better thermal or U factor per unit on the Preservation line of windows which has triple panes with two of those having the Cardinal e366 glass (I believe). Modern high end vinyl window with fiberglass reinforcements are attainable for the average household and a very good window if not exceptionally beautiful. I am in the Kansas City area.
Appreciate the kind comments! I understand the place vinyl has in the market and like all things some brands are better than others. There certainly are some good Vinyl windows that provide good performance at a reasonable price point. If you're buying triple pane windows you are certainly buying some of the best performing windows in the market today. I wish you the best in your endeavors. Matt
I live near Chattanooga TN and will enclosed a screen porch (current floor is 5/4 planks) with 40 foot screen wall on outside wall that will have windows and a door with two side lites. Do the big box stores have anything I should consider? On the floor I will caulk the cracks between the 5/4 planks, add sleepers and advantek to raise height to level inside house (will extend current 3/4 oak planks throughout house onto screen porch. Want it to look like house was built this way and don't want someone to say "oh, I see you closed in your screen porch". Have two french doors from living area that now opens to screen porch. Will remove french doors when finishing job. Current windows for house are Anderson vinyl and think I will use something similar. Thanks for any comments.
What about triple pane windows? I have one manufacture telling me to have both voids filled with argon gas and another insisting that filling more than one chamber is a waste and doesn't yield any results.
The the distance or spacing between the panes make a difference?
Josh Haughton We are good at making triple panes window for our USA client. Contact me by WhatsApp or email Vincent@doorwingroup.com
What about the aluminum Home Depot windows?
Matt, You have sooo much good information for us consumers...things that we would NEVER think of. Please....sell your home building business in texas and move to the midwest where its really cold and give us all good tips on how to build houses in cold climates. hahah long shot i know, but thanks again.
What about power windows? They have silver in their glass.
Are you familiar with cracking of fiberglass window sills from hail?
Thanks for mentioning that. I live in Texas so definitely want to stay away from anything susceptible to hail damage!
Oh. Colorado has summers where everyone gets hail damage. Thanks for mentioning that fiberglass fails under hail.
@@melissamybubbles6139 This was golf ball size hail that caused the damage. We normally don't get anything larger than pea size and it held up to all the smaller hail. The weather the last several years has brought crazier weather. First time we've had hail that large.
@@sa3270 our windows with screen coverings were protected. Our windows w/o screens were the ones with the cracking. Something to keep in mind.
That's all fine for hot weather places like Texas but what would you suggest for colder climates
what about las Vegas Nevada? what is the best long term window will be ?
Hey Matt I know this is an older video and windows have come a long way. I work for a German window and door company that installs German windows and doors here in the US. I’d love to share with you what a we’ll engineered window really looks like. Im very new to your channel but love the build science👍🏻. Let me know I’d love to share. Henselstone Window and Door Systems.
Do you make any french casements? Looking for a casement window for bedrooms, has to meet egress so has to be french.
This may be an odd question but can I put drywall plaster on the edge of my window frame?
Of course, now fire resistance is a big issue. Any suggestions?
I have many casement windows, and 3 very large floor-to-ceiling picture windows. The picture windows do not open, of course, but how do you rate the locking mechanism on the Marvin casement windows/versus the Andersen casement window locks?
Great job Matt appreciate you give opinion without judgment. Nice review and highlight of the features to look for
Thanks Joe! Always appreciate you commenting on my videos. Best, Matt
So Marvin is better than Anderson. I have to choose in the next few weeks which company to go with. I’m willing to go with Marvin even if they cost more. Anderson 400 series versus Marvin?
Fiberglass tends to delaminate in hot dry locations. Also, you are incorrect about vinyl. Many manufacturers provide a lifetime frame warranty for vinyl windows and they are very energy efficient. Jeld Wen is a good example.
I have installed vinyl windows on several houses in Arizona and I have never had a call back for failure of the vinyl frames.
We are building a new home in an historic preservation zone. They insist that we use all wood windows. This blows our budget out of the water. We’re in Tucson Arizona and it’s been my experience that all wood windows in our extremely hot and variable climate do not perform well. If we do indeed move on all wood windows, do you have a recommendation for a brand gets the job done but won’t kill us on price? Thanks for your time, great video.
Yeah do not do it! Anderson 100s should be good enough? I know Sierra Pacifics seem to score well on price and function. Marvins I am told are expensive and slower to get.
Actually you need to find us. DoorWingroup.com
How do you feel about the double low e coated windows? I’ve heard that they have less condensation resistance
How long does the argon last in between two panes? Is there really no leakage that occurs and if so, how soon until the argon gas is all gone?
1% loss a year of argon, industry standard. All the glass have 20 year warranty Andersen, Pella Marvin all get Cardinal glass, so many different types low e 3 is current low e from 20 years ago is obsolete, coatings matter Low e 3 SUN Andersens is what I have flawless, got 29 years out of old Andersen Casements, Andersen low e now changed sashes (glass in factory wood frame) use original hardware 31 sashes changed now low e 3 SUN looks great, sun blocker, low e 3 low e 266 is more sun blocker SUN versus Smart SUN from Andersen SUN blocks a bit more heat from the sun, with a nice tint, privacy on 8 ft slider doors, nice blue grey tint, it actually lets in more visible light on new SUN versus teh old Sun bronze low e 29 years of improved glass....
have to say.. I love the show. Like yourself, I am a building science nerd! I'm obsessed with it. However, I have to ask, why in the world would someone use a Fiberglass product? The finish is painted on and will require painting in the future to protect the fiberglass from UV delamination. Maintenance free is what we want. And what happens when fiberglass is left untreated, because the home owner doesn't keep up with the maintenance??? The fiberglass strands will be exposed to the elements. Furthermore I am curious about investing in Dako Windows USA. What do you think about them?
What about Pella Impervia Duracast single hung windows? Aren't they the best? They sure look good.
How about the cold weather in MN. what would be the best..
Hello any recommendation for typhoon/hurricane windows material...thanks
Thermal break alulminum
Can u buy an acceptable window from the big box stores?
yea go to Lowes and they have an install program with lots of different window brands and materials
Should we repair the lower parts of the rotten aluminum clad windows or replace the whole windows? MN
I find it interesting you showed Andersens lowest grade composite. It is night and day from The Renewal by Andersen product. Plus Smart sun glass is completely different than 366 glass. Although made by Cardinal it is made to Andersens proprietary specifications. Kind of misleading.
+Greg Pasco HIT THE NAIL ON THE HEAD!
Grande you’re a moron. Greg makes a solid point. Fibrex is a composite made of wood and thermal polymers and you want me to believe that plastic and 1 mm glass is better? GTFO. You don’t know shit.
So what is really the difference between 366 glass & low e smartsun ? & if it doesn’t last for that long what’s really the better option
Hi i have an idealCombi window where you press down the button to open or close but it's halfways locked now i can't open it's not fully closed ive been trying to open unlock it no chance since a week any tips , please ?? Would be great thanks a lot
Are Anderson windows good to purchase
Quick question for you Matt. I know this video is 6 years old but still today most of the energy efficient windows have that greenish tint. Do you know any brand that have a completely transparent glass?
How do I identify the window is Triple pane or double pane ?
You ever install Pella, jeld wen or sunrise?
Pella & Sunrise No. Jeld Wen once, didn't think highly
@@buildshow Digging back through some old videos to find something for a replacement project I am working on with 4' wide windows and I need operable for egress. The only thing I am finding is tilt turn. Contemporary house, would love your opinion. But that said- Don't you have JeldWen in your new house? What changed?
Very informative Matt. Appreciate the insight.
Mkh
Great video, thank you. We are considering wooden window frames to replace the beautiful-but-beyond-repair original steel window frames in our home. No other windows seem to offer or come close in architectural style and color options as wood windows. I learned that wood windows are the most expensive - are there options to chose cheaper wood to make it more affordable?
Wood windows ultimately rot, no matter how well it’s treated depends how much upkeep you want to do
Andersen composite windows
have you ordered already? otherwise a moot point
@@johnlombardo7816 no have still not got there with the windows
@@patricecomedy Well I would like to help if I can, that is if you are still in process of doing so. I can offer some advice if you are interested. What area of the country are you? what is your house type/windows you want to buy? contemporary, colonial etc.. how do your current windows operate? You mentioned you want wood, do you plan on painting or staining them, or would you want them from the factory finished?
Matt, thanks for posting so many videos. What are your thoughts on WindowEstore windows? Im a DIYer looking to replace my own windows soon. Both of you are based in Austin, I figured you might know a thing or two about their product.
Thank you in advance.
I'm leaning towards Anderson windows. I have a question, my current windows have storm windows, after having new windows, do I still need to use storm windows? They do serve a purpose of drowning out sounds from a busy street.
Grande1124 Thank you so much for the information.
Elizabeth Hereford Did you purchase windows already? If not, I would recommend the triple option if you are contemplating getting storms again and the price is comparable. Those will be easier to keep clean and will be easier to open and close as you do not have to mess with the storm window. I just installed triple pane windows on my house, and they really do cut down on road noise. Of course, you can do a few windows in triple pane. Windows that gain the most advantage are typically larger or on the sides of the house that get the least sun exposure (north and east side). Other windows you might want as triple pane would be ones in areas where you spend a lot of time as triple pane windows minimize cold air convection drafts. I am assuming you are in a colder climate based on the fact you have storms. You could save money by only doing a few in triple pane. Triple pane windows will not look different from double pane models where as windows with storms will look different from ones without.
@@keithfillinger3182 I'm going to get new ones next year. Hopefully around Spring time, or at least shortly after. Thanks.
building a house in Orange, California. What windows would you recommend?
R SJ I'm a big fan of both Marvin and Integrity by Marvin. Both would be excellent choices for your climate. Best, Matt
Are there any windows that look like the old windows with wide mutts? (mullons not sure about spelling)
Can you link to the video talking about SHGC
Demystifying Window Labels - Recommendations for Good Windows
I just added the link but here it is...
Best, Matt
I need an affordable window, probably will have to go with vinyl. But I want a dark color frame .. black or dark brown. I'm seeing a lot f it on pinterest etc. I am only finding white, and maybe two other colors. Any direction you can offer?
Sierra Pacific 8000 series have 15 different colors
Reason why they dont offer different colors for vinyl is because its terrible at holding the paint. White or almond is usually the best color you can get without having to deal with repainting constantly. Only draw back of vinyl.
What is the brand of aluminum windows that you show? I have aluminum now, and I like it. I would prefer getting aluminum again. Thanks!
铝并不保温
what is the 2021 Low E number?
How hard is it to build a shed?
Super helpful - thanks!
I wish I knew the difference when we built our house. We used Andersen windows and in 15 years they are all rotting away. It was called vinyl clad which we thought they were vinyl but all it was was vinyl paint.They wouldnt do anything about it
My brother had similar issues n he replaced the frame (patio doors) . Bunch of crap 💩
Do you recommend a glass or window type for lowering traffic noise from a close busy boulevard?
Triple Pane with Low - E and Argon Gas or Krypton Gas will the best for noise + Highest for climate control for your home. BUT they are pricey
What does the inert gas has to do with sound proofing?
Argon Gas is denser then air and acts as a sound dampening gas.
Argon might technically be denser, I don't think that's gonna be anything noticeable as far as sound dampening goes. Indeed draining your wallet perhaps. Triple pane should do additional sound proofing beyond than double pane. I was wondering if thickness of pane matter, or distance between panes. Or Frame type (I would think denser frame like wood, vs plastic or aluminum, would add sound dampening).
SIMONTON has a unique sound deadening glass option called Keepsafe glass. Extremely durable vinyl frame with 2-3 times as much vinyl in the frame and superior finish. Best QC in the industry. Research them. Especially the 5500 series. I would put them up against the MARVIN Windows for durability, performance, design and energy performance.
Fenstur windows are a great product. You should really consider them ~ built to a European spec, high performance passive certified .... the only passive certified window and door company made in North America. Solid wood components unlike the Finger joint garbage out there!
Hi Matt, I plan on building a new home in Wilmington, Delaware in 2018. What type of windows do you suggest based on my region/location?
Thanks.
+Reggie Reg I'd heavily lean toward Integrity Fiberglass windows for your climate
as a long time rep of Marvin, Weathershield, Lincoln and regrettably Andersen, the engineered fiberglass unit is the best bet. Pella is poor in my opinion as the series from good to best are not visually discerned and delivers the lowest grades they have.
Tuyệt vời! Chúng ta cùng nghề. We are frend! Good window. Good luck.
I did not know that they put argon into the windows. I was wondering how do you insulate windows.
Argon gas in windows has been around for a while. Best, Matt
Matt Risinger
Right but I don't know much about this topic. I do see a problem though. Windows still get very cold in the winter. In this age of energy efficiency being important how do we find better ways of insulating windows? We still want sunlight and infred rays in but we don't want the temperature flow.
I've heard the argon eventually and slowly leaks double glazed windows, as the years go by, and that what keeps the window performing, energetically speaking, is actually any thermal layer you decide to put in the glass itself and also the fact that it's still two panes of glass separated by air (not as good as argon but still better than just 1 pane of glass or 2 panes together). I'm not sure about this though.
euheide
Well I need a new window because my window is cracked and I'm sure there isn't any Argon inside of there.
George Louis If you live in an area with constant extreme cold weather (snow, etc( area, and don't mind having to replace your windows a bit sooner than you would with thermally broken aluminium frames, then a polymer type window frame (either vinyl or the other newer composite types) will be the best choice since it has slightly better insulation values. You also have the wooden option, which may even last longer than the polymer since, nowadays, the treatment has improved a lot. And wood has even better values than polymer (or so I've heard). This is only regarding the frames though. In other words, the frames themselves won't let as much heat escape your house and won't also feel so cold to the touch. Regarding the double glazing, there is glass with insulating polymer layers inside the window itself (on one or more of the glass panes). You should definitely go for that but be careful that some insulating layers are designed to keep the heat out, while others are designed to keep the cold out. I know this seems strange but this is what I read. And then there are other factors such as the spacing in between the panes of glass, the thickness of the panes of glass and, last but not the least, you have the options of triple glazing or secondary glazing if you are still not satisfied, although secondary glazing is more for sound than for temperature (that I know of). Thermally broken aluminium is usually the best choice IMHO because of durability but, in extremely cold weather it's probably not the best choice.
For new construction in N.E. Arkansas which would you go with?v
Scott Sanders I would consider the fiberglass units. Integrity by Marvin is a terrific choice.
So many people have installed white vynil replacement windows in my neighborhood and the thick frames and ugly corners are hideous in my opinion. I'm thinking about double glazed aluminum thermal break for my house. I like the thin frame of aluminum.
Did you find any you like?
No mention of high performance windows? Triple glaze? Marvin ultimates are your top of the line windows?!?
This is a Marvin ad and leaves out many many better performing types of windows.
What are examples of those better performing windows? Just getting started with my research.
Ed Sanborn Alpen or Logic are good brands to consider for high performance windows made in the us (mostly). Good luck!
Fenstur windows are the highest end window you can buy. They are actually Passive certified unlike a lot of passive "appropriate" knock offs. Well worth considering if you can get a hold of them.... they are very busy for a good reason.
Thanks for the education. This channel is unique in that you don't have to guess whether the speaker is a conspiracy nut.
why don't u share pella windows? their quality is outstanding. im surprised you dont or haven't used them.
Has anyone seen Dako doors and windows? I bought them a few weeks ago, and I would recommend them to anyone looking for good design and quality.
"...Will last almost forever..." Kinda rediculus statement for any modern building material.
Vinyl aka uPVC isn’t strong? Lol, dude sounds like he works for Marvin! How much does that last window cost?
Yes, vinyl is not strong.
Need to replace vinyl windows in Colorado. I hear fiberglass is the best option here ... thoughts? Thank you!
renewal by anderson has a new composite called fibrex which holds up really well in colorado
Why does triple windows stream up
E
Argon? Why not Krypton?
I was told fiberglass smells when it gets warm out...
They called it off gassing..?
GGK Outdoors No, that's not correct. None of these will off gas fumes.
From what I have learned fiberglass windows with laminated glass are best - _but not cheap_ 💰
塑钢窗upvc才是最好的.导热系数最低的
Very helpful vid. Thx.
What I would like to have u eval r those windows that have higher r value. All those ones u discuss here r still very inadequate n ur stuck with years of the inadequacy. If you build any type of efficient home the next energy consumption is the windows !! Well ??
I like coconuts 😊
Renewable is most important
Lots of air space in the frame of that first window
What about copper clad frames?!?! Does Marvin or other top brands not offer copper?
You put in a wood window up here.....be wise to wear your Kevlar vest the day you do it!
Anderson windows only way to go resesh
Dang. . .there sure is a lot of "bonding" and "joining" and "profiles" in some of those windows. Lotsa places to fail in my opinion. Why are doors just a "glazed unit" put into a wood frame and sealed on all 6 sides verses these? I bought 4 Buffelen Doors that are low-e n argon filled, all glass, wood frame obviously, get slammed by every kid in the neighborhood 15 times a day, temps from 0 degrees to 100 and it's been good for 20 years so far and only sealed when we built. . . Hmmmmm. . . Why should I use a very very complicated frame for a window that get 90% less use to achieve the same thing?
Why lean so hard towards Marvin?
Historical profile is most true. But the best you can and realize a salesman tries to add to the specs when not needed. Low E is the most prevalent add which only works against direct sunlight.
I think you missed the part at the beginning where he said he was in the Marvin factory.
Still if the area outside the window is 100 degrees the frame work and the window panes will be important for efficiency. The Argon gas is used to not allow the heat to transfer over easily like clear coats.
Don Powell
Marvin’s are the best. At least for normal folks. They hold up better than Anderson
Renewal by Andersen is the best window you could INVEST in.
Thousands of lifetime projects with Woodglut plans.
this guy is nothing but a salesman. I'm glad he is in Texas.
Anderson Hernandez he deserves to make a living just like you.. If you watch this guy's videos, he is more than just a salesman.
Pretty had to be a "salesman" when you often review and approve competing products.
Bryan. he is. i watch him for knowledge. i haven't bought a thing
Anderson Hernandez Agree
UPVC windows are the best i feel...
FIBREX!? Composite!?
thanks, but I'm more of a Linux guy myself.
Haha nice
the best frame window is wood protected with aluminium rest of frames is shit(for privat homes).for industry,sheops the best in aluminium from Hidro (Norway) rest is shit
u need to be better informed. Norway is harsh and triple-glaze the sash. The thermal break is makes for efficiency, not available in vinyl.
The windows don't do much lol I got them lol
If you want to build it you can find nice instructions on the Stodoys website.
Comepauseit
I Think first it's about MS Windows ! oh ! shit !
World Finance loans
Southmost
BrownsvilleTexas
Apply today for a loan
when i hear vinyl all i think of is cheap, cheap, cheap
vinyl window is worse ever
Hahaha sorry but yo are not serious at all man. The vinyl that you showed looked like was made on someones garage. I worked on manufacturing vinyl windows and the majority of manufacturers have machines that cut the corners and look fantastic. I think you are biased. You don't like vinyl windows or you are trying to sell other things but please be honest.Fiberglass is better but at what cost. Vinyl is not that good but it's not garbage like you presented it.
thank you for your ''detailed'' answer. you are wrong! if you manufacture the vinyl windows with the right steel reinforcement they are practically indestructible. but there are so few manufacturers out there that do this. for cost reason they cut the expenses on steel reinforcement either on quality or the thickness and the result is that windows bend. i've seen windows manufactured by our factory 15 year old or more ,they looked like brand new and never required service except maintenance of moving mechanisms. so i speak from my experience. now maybe fiberglass windows are better but it depends on the budget you have. of course a Ferrari is better than a Ford but i can't afford a Ferrari.
it seems to me that you don't read at all my comments. it feels like you are just a troll. bye bye!
i didn't call you names. anyway the comments are here for others to judge. by calling me ignorant you expose yourself for what you are.
ii don't like your attitude. you come and comment on my comment when you have plenty of room to write a comment of yours . i have written a comment full of technical details based on my experience. you just say an opinion based on your perception. if you can't stand a discussion don't enter at all. and yes based on your attitude it feels to me like you are a troll. maybe you're not bu it feels to me that way. you write a comment like '' vinyl is just dirty cheap'' ,after i answer you backing up my opinion you answer they are ugly. sorry but i have analyzed value for money ,i have analyzed the technical aspects and all you have to say is they are ugly. as i said you could have wrote this as an independent comment and i'm fine with that. it's your opinion that vinyl is ugly. but you can't comment a post with technical details in this way is disrespectful . or you debate with me full technical mode or you don't debate, of course you could downvote my comment if you disagree.
What vinyl company does this "steel reinforcement" so well? Vinyl is lower end and always will be. Imperiva by Pella/Fibrex by Andersen are reinforced vinyls that compete with "high end" vinyls from companies like Simonton. This guy presenting isn't telling us anything earth shattering, it's just the truth. However, Integrity is a great product but expensive, cannot do radius shape windows that are actually fiberglass, and limited on height since fiberglass tends to twist at long lineal lengths.
Just another biased sponsored video.
Man your a Marvin dealer and saying there the best ? What a joke 😂😂😂
I am building a home in Wisconsin, what type of window would you recommend, wood or fiberglass?
Thermal break aluminum