I'm so glad I came across your channel. I was prepared to pay $1,700 for a lesser screen with professional installation. I can do this myself, retain sync 3 for $1,100! You're the man. Earned my sub and like.
Thats until the sync3 module fries on you and has to be replaced . Its actually fairly common among other parts of the sync3 system going bad. If I said it was reliable I'd be lying to you. Unless your omly looking to keep the truck for a few years then trade it in for a new one. On top of that the firmware is buggy as well. Andriod carplay is actually significantly better.
Fantastic video! What is the link to the stereo company? I just bought an apple Carplay , top of the dash 10"unit, Apple & Android for my Nissan Van. Got it online @ Walmart.
Just installed on a F600 using this video as my only instructions. Works great with Android Auto. As someone mentioned earlier, if you have manual HVAC, make sure the you keep the little gears aligned or you'll either lose your Max AC or Mac Defrost setting. I had to do it twice to fix that.
Of all the tesla style units I have seen, this is the first one that I think I would actually buy. My biggest reason I have held off is until now, I would loose my Sirius. I'm going to add this unit to my Christmas list.
One of the best car audio how-to videos I've ever seen. Your explanation, delivery and meter is perfect. Good camera work too. Well done and thank you!
@@DeaninItYourself If your vehicle has sync but not CarPlay does this give you the CarPlay view or will it only operate with the system the truck comes with from factory?
Excellent, excellent tutorial. I purchased this unit and have been looking for a good installation video. There are a few out there, but yours is the best and most detailed covering all of the questions that I had. Now I can dive into installing it with confidence.
i dont like touch screens in vehicles. i do not plan on getting this for my f150. But i stayed and watched the whole thing. this is hands down the best tutorial/build along video I've ever seen installing an aftermarket part. Honestly great video.
@@Martin-wy2on: touch screens are dangerous. Radio with a knob- good song comes on, rotate easy to find knob. Song ends repeat. Touch screen- good song comes on, navigate layers of menus while not watching the road, adjust volume while watching the screen. Repeat when the song ends. Aircraft still use knobs / switches for a reason.
@@drewthompson7457 Not newer aircraft - in fact they don't even use a yoke for steering. Newer aircraft are plastered with touch-screens that are customizable to the pilots preference and incorporate a side-stick for maneuvering the plane. Hard buttons still exist of course but most everything is controlled from the touch screens.
Thanks to you I purchased and install mine. You did an excellent job with your videos and explaining the steps. My wife thinks you are Jamaican, I told her maybe but you are definitely from the Caribbean.
I wish I found this video before I went and bought the linkswell unit for my 19 f250. This looks like a much better system with a cleaner install/wiring. Thank you for this glorious video.
Just watched this video. Very helpful, I am looking at upgrading my new truck interior. But I wasn't sure which radio to get. Then I came across yours. Your video came in handy. I was gonna pay someone to do this for me. You just saved me time n money. Thanks again
Used your video to install mine. Very helpful. A tip for those with manual a/c, don't turn your temp knob when you take it out or it won't be timed right. The small gear turns the big gear and it needs to be set with as equal space from the stop as possible (count the teeth). Thank you sir! *Also nobody mentions, wireless Anrdoid Auto
I bought basiclly the same radio for a chevy silverado. They just come with other wires made for my harness and the plastic shape to match my truck. I got it on Aliexpress for 600 for a 128gb 8gb ram model. 14.4" screen. the f150 model is even cheaper than the chevy version on aliexpress. Shipping was a little slow but at least i got my radio and it works great.
Thank you for this very informative video! It gave me courage to purchase and install the unit by myself. Fair warning though anyone with a manual AC there are extra steps to take when transferring over the temperature control dial. You have to set it in the middle of the temperature diagram and keep it on there. Along with the big gear on the circuit board you need to line it up with the hole on the board, then connect. Had to take apart after installing to find this out.
This is a very intuitive instructional video. I installed mine in my 2019 Ford Raptor yesterday and it was nice and easy to install thanks to this video. The deck works great and is, like others have said, very smooth operating fully integrated into the stock system. Very happy with my purchase thanks to this video. I am now looking for ways to customize the home portion of the tablet.
Great video, though I'm using a AuCar unit for a 2018 Ford Explorer, there is lot of similarities between the two units regarding the main connections, this video filled the gap that was missing in the other install videos, that was connecting the cables to the unit.
I am SO stoked to have come across your video...I've been pondering doing this to my 2018 F150 Raptor for years. Like you I just couldn't do it and loose my Sync system...Your tutorial is AMAZING....you are clear, concise and encouraging....Well done and thank you! Question: what's the purpose of the USB's and Sim card harnesses?
The usbs are for connecting external USB drives to expand storage of music and videos and also to perform the firmware updates. The SIM card is to allow you to use all the apps without connecting your phone via carplay
Sweet. Thank you. My unit arrives tomorrow and I've already got my sim card from my cell phone provider to hook up. I'm incredibly stoked. Thanks again! @@DeaninItYourself
I'm in the middle of installation of the screen I got from aliexpress in my 18 Ford raptor. I got the answer for the USB cable.. I thought this cable would connect to the usb port in the tray next to the shift knob..again great video man this def helpt me jump and buy the screen 👍👍👍
One more question...since my truck has the gps system already like I believe yours does...is it necessary to install their gps system. Does it do something more than what our factory system does?
In same boat as you all. I have a 2018 Raptor and wasn’t sure what to buy until finding this video and the follow up one where the 6month review comes. Thanks for the patience and will order mine using your code. Thanks.
this is a most helpful installation video on youtube! thank you so much for making this video. My installation went easy because I watched your video. Would you mind share the instruction manual please?
Just wanted to say THANK YOU SO MUCH!!!!! This was a super help for me in installing my unit. The SYNC works perfectly. The sound is better than the original radio. I would have been lost, but you have helped me so much.
The soft touch screen on my 2012 cracked, seeing this and the explanation, thank you so much, automatically subscribed, keep the amazing work going bro!
Three questions. 1. Does the install work no matter the version of Sync 3 you happen to have installed ( I'm on 3.4 latest rev) and can I continue to download newer revs? 3. Does this install allow me to continue using the Att connected car I pay for to have WiFi in vehicle? I don't think it uses a sim that I'm aware of. Thanks and unbelievably good video.
Wow, this is for the long ride. It is the best Install DiY for this radio. I was very concerned about installing it myself, but you explained everything to the letter. I was prepared to paid for the istanlation.
I just seen one, they use a OEM Lightning/MochE radio, witch is this same style but not a cheap Chinese one You can also put the bigger sideways screen, that keeps more dash controll knobs, it uses the newer superduty radio, all OEM again
Great install video and commentary, well done and thank you! This is a tough one. Online reviews are terrible for AutoTecPro. It’s a lot of $ and hassle for the risk. Looking forward to your 6mo update.
Great video, but same concern. Online reviews are consistently terrible regarding the longevity of these units from AutoTecPro and also regarding the quality of service you get following your purchase. Seems like their website has now been disabled. Would love to see you do another review of this unit after a few months of use.
Wow, super nice video. I dunno if I’d I vent $800 into my 2015 with 200k miles, but it’s pretty nice and ridiculously good tutorial. Still watched the whole thing 😊
Im going say this ! I bought the unit and used your DYS and let me tell you every step used made my experience rather ez and I was successful able to install my head unit now I’ll customize it to my liking thx so much 😊
I have a 2019 F350 with 4' screen, I picked a used unit for a F150. Knowing that I would have to do some kind of adaptation. But apearantly AutoTech Pro will not sell any parts just entity kits, do you have any advice?
The main problem with most larger Ford vehicles large screen tends to block something important. If you go larger than 10" you either block your air vents or air/dash board controls.
I was going to get this head unit for my truck, but it wouldn’t fit my truck because it was a 2014, so from 15 on up it would fit so I got the Kenwood DMX809S, with the kit was $1353 installed.
Totally awesome. Everything explained. Theonly question.. Android updates abd planned for obsolesence, meaning they stop updating the os for hardware making the hardware obsolete. Typically 3 years. Rooting is not a recommended option, but if you're selling after that point no big deal. Love the ugrade, but concerned about life cycle of unit. Any feedback is appreciated. Best tutorial i've ever seen.
that is always an issue but i think for the most part this should be good for years to come, since i am primarily using it with wireless carplay and media playback
Im still undecided if it's worth getting a big touch screen for my Raptor. I would not do 4g but likely would use my phone as a hot spot. Thanks for the detailed video
Thanks for the video, it was a lot of help. Also, the sync module holes are not wrong, you you just had it upside down, other than that this video is on point. Has anyone had issues with their ambient lighting not working anymore?
So I just ordered mine and I just received it today. I used your code. Thanks for the discount. What is that extra wire from when you connect to cam bus It has a white tip, three wires, red, black and white. What is that used for and does the speaker still work with the GPS without having to connect the extra speaker that came with it 19:12
🔥Great video! If you don’t mind, could you answer a question I have? If I currently have Sync2 (2015 f150) but want Sync3 features on the autotec unit, would I be able to buy a sync 3 module, attach it to the autotec unit fitted for sync3 and plug up? Or is the wiring totally different? If so, is there an easy way to ‘adapt’ the wiring to make it work? Thank you!
@@DeaninItYourself Ok. Thanks. Just trying to figure out where to get started. I didn’t know if it was just a matter of getting the module and maybe some adapters so my factory wiring fits the sync 3. I’ll search around UA-cam.
Really detailed and nice Video, thanks for the posting! However, I am not sure if he or I is color blind. If anyone notice that little detail when he says the colors. lol
Thank you so much for your video! I think I'm going to pull the trigger as well and get it! Just have a quick question I current have a aftermarket amp and sub and use Amppro interface. I should be just to add that to this correct? It just plugs into Apic unit that u-took off of the OEM unit and swapped it over to the new unit. Thank you again!
This was posted about a year ago. Is everyone still happy with this product. I’m about to purchase this and would feel more confident with your endorsements. Does the Ford App remote start and remote lock/unlock still work?
I'm not happy with mine. I watched this video and I ended up getting one. But as soon as I installed it I wish I hadn't. It might just be me but you need to do everything(DIY) as far as the way it operates. There is no way of turning the system off. It is supposed to remember where you left off, it doesn't. The radio would turn on on its own. When I wanted to listen to the radio it would always come on with the FM2 stations which I had never setup. I have had to reset the unit at least once every 2 weeks if not more. I've had problems with it since installation (12/23) until I took it out last week(8/24). The final reason I took it out was my APIM went bad ($300, overheated, I believe). The OEM APIM attaches to the back of the unit at the heat sink fins. I asked AutoTec Pro if I could return and possibly get 3/4 of what I paid for it back since it has never worked correctly. They said NO! Nothing about it was straight forward. This product should work correctly without having to do anything once installed. Hopefully people have better luck than I did.
Your video definitely helps the install of AutotecPro's display. I love this new display. Do you know a good Ford and/or Ford F150 boot logo that will work with this display? All the logos I found will either stretch it out too big or shrink the logo too small. The longer height of the screen seems to be the issue. Thanks.
The next option is a scanner and tunner built into the tablet and boom connectred under the dash. So once somthing flags up you can read what exactly it is. Just an idea
Great video.. I have a few questions.. will I be able to keep my SiriusXm with of course radio ID updated..? I have AT&T wifi build into what im assuming my Synce.3.4 will i be able yo keep service.? Thanks .
Love this unit, I just have a question about the ac and radio controls? If you retain the ac control panel, why is it also shown right above them on the screen. Seems it would be nicer to have the radio functions shown at the bottom of the display in what would have been the original location. Can the display ac controls be swapped with the radio functions?
Something to be mindful of is static when working with any mother/circuit boards. Never do this on a carpet, blanket, or anything that can produce a static shock. It can fry them beleive it or not.
@DeaninItYourself I noticed when you removed the sync display module from the dash there was one plugin for the factory usb. But then when you mounted the sync module to the back of the tesla screen there was two plugins one for the factory usb and another and it was a completely different module from the one you removed. I'm sure its nothing but. Could you please explain? Thanks. I just bought one for my 2018 F150 with sync 3, 8 inch screen and auto climate control and it arrived yesterday Dec 18th 2023, Christmas present from wife. :) I will probably install it on Christmas day and im educating myself on the install watching your video. Fantastic install video by the way. Much better than the one autotecpro has, as you explain all the connections.
the removal video was from an removal i did on a different vehicle, because the footage from my vehicle got erased mistakenly, thats why it only had 1 usb port, the important thing is just to connect the usb from the port you removed it from on your model.
I'm looking at the 12.1" option for my 2019 F250 as well. Does the 360 degree camera view look like factory? Sometimes videos and pictures make it look a little funky. Also, does your truck have a 3rd brake light cargo camera, and if so, does this system retain that? Appreciate the video and any extra input my man!
This unit for the ford does not have RCA outputs for amplifier, you have to do aftermarket amp install by tapping into the connections behing the back seat. It basically connects to your existing sync system
Hello. You made a nice video, everything is fine explained perfect. But I have one question.y is 2015 platinum but doesn’t come with sync 3 I believe my come with sync 1. Do this works with my?
Hands down, the BEST how-to video for these epic screens. Thank you!! Side note/question...which SIM card did you go with? Any specific install steps for that? Thanks!
@@DeaninItYourself I have the ATT service through Ford but have never known about a sim card, it makes sense, but is there a sim card I should transfer form somewhere out of the stock unit? I just renewed my plan and hope I did not lose $200 for the year. Thanks
@@DeaninItYourself Ohh ok, thanks for the response. I have a Raptor with the 8" Sync and B&O audio, I want to upgrade to this screen and hoping the camera quality may be better but guess not. Thank you so much for taking the time to response.
Thank you! This helped me install a similar headunit in my F150! Any issues with SYNC conflicting with the new headunit's system? Any issues with starup lag?
I'm so glad I came across your channel. I was prepared to pay $1,700 for a lesser screen with professional installation. I can do this myself, retain sync 3 for $1,100! You're the man. Earned my sub and like.
Glad I could help!
Thats until the sync3 module fries on you and has to be replaced . Its actually fairly common among other parts of the sync3 system going bad. If I said it was reliable I'd be lying to you. Unless your omly looking to keep the truck for a few years then trade it in for a new one. On top of that the firmware is buggy as well. Andriod carplay is actually significantly better.
@@JoshSmith-wo7zw Seek Right and Power button down 3 seconds... Pretty much once a month in my 2018 F150 lol.
Nice video! Did you install the external mic? Or does it use the OEM mic?
Fantastic video! What is the link to the stereo company?
I just bought an apple Carplay , top of the dash 10"unit,
Apple & Android for my Nissan Van. Got it online @ Walmart.
Just installed on a F600 using this video as my only instructions. Works great with Android Auto. As someone mentioned earlier, if you have manual HVAC, make sure the you keep the little gears aligned or you'll either lose your Max AC or Mac Defrost setting. I had to do it twice to fix that.
Thanks for sharing
This video shold be the reference for all tutorials. Great Detail and it actually gives me confidence to do this without trouble
thank you
The fact that it retains the factory Sync is the coolest thing I have ever seen. This is an awesome unit.
yes that was the selling point for me
If my system is Sync1, can it upgrade my Sync?
This has to be one of the coolest plug n play upgrade units I've ever seen. Does it work with the FX2 package descent controls???
Except that sync3 is unreliable as all hell.
@@JoshSmith-wo7zwmy 2015 F150 Lariat is a sync 2 is will I have issues if I purchase and install this radio?
I upgraded to this setup from the stock 2 inch sync system it it’s by far the best upgrade you can do to your truck
I’m guessing sync 3 doesn’t work if you have the little screen?
Of all the tesla style units I have seen, this is the first one that I think I would actually buy. My biggest reason I have held off is until now, I would loose my Sirius. I'm going to add this unit to my Christmas list.
One of the best car audio how-to videos I've ever seen. Your explanation, delivery and meter is perfect. Good camera work too. Well done and thank you!
Wow, thanks!
This has got to be the best tutorial video I’ve seen. Superb explanation and video quality!! Thank you for taking the time to produce this video!!!
Glad it was helpful!
Just Ordered
mine this morning ,, how long did it take to receive it ?
@@DeaninItYourself If your vehicle has sync but not CarPlay does this give you the CarPlay view or will it only operate with the system the truck comes with from factory?
i love how you're able to retain the actual physical buttons for the climate control
me too
Excellent, excellent tutorial. I purchased this unit and have been looking for a good installation video. There are a few out there, but yours is the best and most detailed covering all of the questions that I had. Now I can dive into installing it with confidence.
Glad it helped
i dont like touch screens in vehicles. i do not plan on getting this for my f150. But i stayed and watched the whole thing. this is hands down the best tutorial/build along video I've ever seen installing an aftermarket part. Honestly great video.
Thanks for the kind words
Just curious Joshua, why don't you like the touch screens in your vehicle?
@@Martin-wy2on: touch screens are dangerous. Radio with a knob- good song comes on, rotate easy to find knob. Song ends repeat. Touch screen- good song comes on, navigate layers of menus while not watching the road, adjust volume while watching the screen. Repeat when the song ends. Aircraft still use knobs / switches for a reason.
@@drewthompson7457 Not newer aircraft - in fact they don't even use a yoke for steering. Newer aircraft are plastered with touch-screens that are customizable to the pilots preference and incorporate a side-stick for maneuvering the plane. Hard buttons still exist of course but most everything is controlled from the touch screens.
I really appreciate that you took so much time to create such a high quality installation video. Truly helpful and sold me on this display!
Thanks to you I purchased and install mine. You did an excellent job with your videos and explaining the steps. My wife thinks you are Jamaican, I told her maybe but you are definitely from the Caribbean.
I am Jamaican.
I wish I found this video before I went and bought the linkswell unit for my 19 f250. This looks like a much better system with a cleaner install/wiring. Thank you for this glorious video.
I’ve been looking at the new links well XL.. Is that the one you have, and what don’t you care for about it?
i don't even have a ford truck but i found this video to be extremely enjoyable to watch!
Thank you so much
Just watched this video. Very helpful, I am looking at upgrading my new truck interior. But I wasn't sure which radio to get. Then I came across yours. Your video came in handy. I was gonna pay someone to do this for me. You just saved me time n money. Thanks again
Anytime.
Autotec should pay you for this amazing video!!!!
Thank you, I will try to work something out with them
Used your video to install mine. Very helpful. A tip for those with manual a/c, don't turn your temp knob when you take it out or it won't be timed right. The small gear turns the big gear and it needs to be set with as equal space from the stop as possible (count the teeth). Thank you sir!
*Also nobody mentions, wireless Anrdoid Auto
Thanks for the info!
Thank you for taking the time to set up your cameras to get all the shots. Exceptional video sir. Appreciate your work.
My pleasure!
I bought basiclly the same radio for a chevy silverado. They just come with other wires made for my harness and the plastic shape to match my truck. I got it on Aliexpress for 600 for a 128gb 8gb ram model. 14.4" screen. the f150 model is even cheaper than the chevy version on aliexpress. Shipping was a little slow but at least i got my radio and it works great.
I don't even own an F150 but i watched your video 😊. Your good at doing step by step instructions. The new screen looks awesome 👌
Thanks 👍
Thank you for this very informative video! It gave me courage to purchase and install the unit by myself. Fair warning though anyone with a manual AC there are extra steps to take when transferring over the temperature control dial. You have to set it in the middle of the temperature diagram and keep it on there. Along with the big gear on the circuit board you need to line it up with the hole on the board, then connect. Had to take apart after installing to find this out.
thanks for the tip
This is a very intuitive instructional video. I installed mine in my 2019 Ford Raptor yesterday and it was nice and easy to install thanks to this video. The deck works great and is, like others have said, very smooth operating fully integrated into the stock system. Very happy with my purchase thanks to this video. I am now looking for ways to customize the home portion of the tablet.
Glad it helped. check out the F150 forums they have a forum dedicated to the autotecpro unit
Does it retain factory mic ? And how about the delay going into reverse?
Best tutorial on planet earth
Thank you so much
I just ordered mine 7/25..I can't wait for it to get here...
Did you get it? How do you like it?
I don't own a Ford, but i learned a lot. Good video, very well done.
Glad you enjoyed it!
I pick up my truck tomorrow. 2018 White Gold with Camel interior. I’m definitely putting this thing in it. Awesome video.
Great video, though I'm using a AuCar unit for a 2018 Ford Explorer, there is lot of similarities between the two units regarding the main connections, this video filled the gap that was missing in the other install videos, that was connecting the cables to the unit.
I am SO stoked to have come across your video...I've been pondering doing this to my 2018 F150 Raptor for years. Like you I just couldn't do it and loose my Sync system...Your tutorial is AMAZING....you are clear, concise and encouraging....Well done and thank you! Question: what's the purpose of the USB's and Sim card harnesses?
The usbs are for connecting external USB drives to expand storage of music and videos and also to perform the firmware updates. The SIM card is to allow you to use all the apps without connecting your phone via carplay
Sweet. Thank you. My unit arrives tomorrow and I've already got my sim card from my cell phone provider to hook up. I'm incredibly stoked. Thanks again!
@@DeaninItYourself
I'm in the middle of installation of the screen I got from aliexpress in my 18 Ford raptor. I got the answer for the USB cable.. I thought this cable would connect to the usb port in the tray next to the shift knob..again great video man this def helpt me jump and buy the screen 👍👍👍
One more question...since my truck has the gps system already like I believe yours does...is it necessary to install their gps system. Does it do something more than what our factory system does?
In same boat as you all. I have a 2018 Raptor and wasn’t sure what to buy until finding this video and the follow up one where the 6month review comes. Thanks for the patience and will order mine using your code. Thanks.
I just found out one of us is color blind. Nice and easy installation video. :)
that would be me lol
this is a most helpful installation video on youtube! thank you so much for making this video. My installation went easy because I watched your video. Would you mind share the instruction manual please?
Unfortunately there is no instruction manual
Just wanted to say THANK YOU SO MUCH!!!!! This was a super help for me in installing my unit. The SYNC works perfectly. The sound is better than the original radio. I would have been lost, but you have helped me so much.
you are welcome
Is there a way to show the outside temperature at all times?
The soft touch screen on my 2012 cracked, seeing this and the explanation, thank you so much, automatically subscribed, keep the amazing work going bro!
Thank you for the kind words and the sub
Three questions. 1. Does the install work no matter the version of Sync 3 you happen to have installed ( I'm on 3.4 latest rev) and can I continue to download newer revs?
3. Does this install allow me to continue using the Att connected car I pay for to have WiFi in vehicle? I don't think it uses a sim that I'm aware of.
Thanks and unbelievably good video.
Yes to all 3
Thx, I managed to get that figured out and it delivers tomorrow. Gonna be a fun Saturday install.@@DeaninItYourself
Thankyou for making this video! Bought mine a week ago and your video was very helpful getting this thing installed! Appreciate you!
Whats the link?
Great video. Incredibly informative and appreciate the patience to go step by step. You’ve earned a new subscriber!
Thanks for the sub!
Wow, this is for the long ride. It is the best Install DiY for this radio. I was very concerned about installing it myself, but you explained everything to the letter. I was prepared to paid for the istanlation.
Thank you
You did a great job installing it just the help I needed to install mine that just came in today ! Again Thank you so much for the help 😊
Anytime
i trust in you and i just ordered one for my 2020 ford expedition limited stealth edition 😎
good luck. i hope you enjoy it
If you have the manual AC, be sure not to change the alignment of the teeth on the temp adjust gears when swapping over.
so what happens if you do that mine stopped working
My man, this is the BEST demonstration video! U did an amazing job! Bravo
I appreciate that!
It's been a few weeks. Do you still like the radio? How does it sound?
It’s been great so far
I just seen one, they use a OEM Lightning/MochE radio, witch is this same style but not a cheap Chinese one
You can also put the bigger sideways screen, that keeps more dash controll knobs, it uses the newer superduty radio, all OEM again
can you send me the link to this?
Great install video and commentary, well done and thank you!
This is a tough one. Online reviews are terrible for AutoTecPro. It’s a lot of $ and hassle for the risk. Looking forward to your 6mo update.
Great video, but same concern. Online reviews are consistently terrible regarding the longevity of these units from AutoTecPro and also regarding the quality of service you get following your purchase. Seems like their website has now been disabled.
Would love to see you do another review of this unit after a few months of use.
I have not had any issues with their support. Using the F-150 forum helped a lot too
@@DeaninItYourself Have you had any issues with the radio since installation?
Time for a 3 month update - functionality, features, thoughts, etc! @@DeaninItYourself
Wow, super nice video. I dunno if I’d I vent $800 into my 2015 with 200k miles, but it’s pretty nice and ridiculously good tutorial. Still watched the whole thing 😊
Thanks for watching.
AutotecPro website has been disabled. Any ideas why?
Same question.
A scam
I just clicked the link and went to the website just now
they may have had issues months ago but it is working fine now
Im going say this !
I bought the unit and used your DYS and let me tell you every step used made my experience rather ez and I was successful able to install my head unit now I’ll customize it to my liking thx so much 😊
What size screen did you upgrade from? I’m trying to figure out if it could work from the 4 inch screen
yes it can
I have a 2019 F350 with 4' screen, I picked a used unit for a F150.
Knowing that I would have to do some kind of adaptation.
But apearantly AutoTech Pro will not sell any parts just entity kits, do you have any advice?
Love mine just wish they would add RCA outputs. Going to add a 360 camera system to it next.
The main problem with most larger Ford vehicles large screen tends to block something important. If you go larger than 10" you either block your air vents or air/dash board controls.
Something else to take my eyes off the road
I was going to get this head unit for my truck, but it wouldn’t fit my truck because it was a 2014, so from 15 on up it would fit so I got the Kenwood DMX809S, with the kit was $1353 installed.
Great write up, I was on the fence about which one to get for my 2019 Raptor, but not anymore. Thanks man.
No problem 👍
Thanks for the videos . Quick question does the stock radio have a SIM card or I have to buy a new sim card for my new 14.4 radio
you need a new sim card, the stock radio does not have one at least that I am aware of
Your video was the deciding factor! Mine comes in today! Thank you, as I know this video will come in handy with the install this weekend.
Glad it helped!
How do you like it?
Totally awesome. Everything explained. Theonly question.. Android updates abd planned for obsolesence, meaning they stop updating the os for hardware making the hardware obsolete. Typically 3 years. Rooting is not a recommended option, but if you're selling after that point no big deal. Love the ugrade, but concerned about life cycle of unit. Any feedback is appreciated.
Best tutorial i've ever seen.
that is always an issue but i think for the most part this should be good for years to come, since i am primarily using it with wireless carplay and media playback
I dont even have a truck but I enjoyed your video. Great work!
Thank you for the kind words
This Helped me install my Tesla style screen on my 2017 FORD RAPTOR! Thanks for your useful video!
Glad it helped!
Great video. Im torn between this screen, the Linkswell and the Alpine ILX. From your research would you still choose the AutoTec?
In my opinion yes.
Thanks for the great video. Two questions: 1) Can I convert my 2013? And 2) what kind of watch are you wearing? That thing looks sick!
Yes you can! And it’s an Apple Watch Ultra. With a case band.
Im still undecided if it's worth getting a big touch screen for my Raptor. I would not do 4g but likely would use my phone as a hot spot. Thanks for the detailed video
the touch screen works bettter than i thought
Bought one and it’s the biggest battery drain ever.
really, what is happening?
@@DeaninItYourself I’ve purchased this one and another brand and they just kill the battery in my truck. My neighbor has the same issue.
Thanks for the video, it was a lot of help. Also, the sync module holes are not wrong, you you just had it upside down, other than that this video is on point.
Has anyone had issues with their ambient lighting not working anymore?
The module has to be mounted in this direction or your navigation will be off.
So I just ordered mine and I just received it today. I used your code. Thanks for the discount. What is that extra wire from when you connect to cam bus It has a white tip, three wires, red, black and white. What is that used for and does the speaker still work with the GPS without having to connect the extra speaker that came with it 19:12
Great video. Would love a follow up review before making my decision. Definitely following
I will do a follow up soon, stay tuned
🔥Great video! If you don’t mind, could you answer a question I have?
If I currently have Sync2 (2015 f150) but want Sync3 features on the autotec unit, would I be able to buy a sync 3 module, attach it to the autotec unit fitted for sync3 and plug up? Or is the wiring totally different? If so, is there an easy way to ‘adapt’ the wiring to make it work?
Thank you!
you should upgrade to sync three first and then you can just plug and play
@@DeaninItYourself Ok. Thanks. Just trying to figure out where to get started. I didn’t know if it was just a matter of getting the module and maybe some adapters so my factory wiring fits the sync 3. I’ll search around UA-cam.
SIM card, where do i get a SIM Card for my truck? Great video BTW.
I bought mine from Tello.com, but you can get it from T-mobile as well
Amazing step by step guide. Thank you. Great job!!
Glad it was helpful!
Really detailed and nice Video, thanks for the posting! However, I am not sure if he or I is color blind. If anyone notice that little detail when he says the colors. lol
i might be a bit color blind, or just a slip up
Either way, just caught it when you said it. Love all the videos that you put up man! Thanks for sharing all the details!@@DeaninItYourself
Hi, great job! Does the remote door lock on the Ford App still work? I heard that this is messed up on other systems.
As far as I know it still works.
You.can actually unlock climate controls through the radio if you use forscan and go into the BCM and enable it. All you have to do is turn it on.
Thank you so much for your video! I think I'm going to pull the trigger as well and get it! Just have a quick question I current have a aftermarket amp and sub and use Amppro interface. I should be just to add that to this correct? It just plugs into Apic unit that u-took off of the OEM unit and swapped it over to the new unit.
Thank you again!
yes i have an aftermarket amp as well, all my amp connections are behind therear seat. so it should not affect the install of the radio
This was posted about a year ago. Is everyone still happy with this product. I’m about to purchase this and would feel more confident with your endorsements. Does the Ford App remote start and remote lock/unlock still work?
they all still work
I'm not happy with mine. I watched this video and I ended up getting one. But as soon as I installed it I wish I hadn't. It might just be me but you need to do everything(DIY) as far as the way it operates. There is no way of turning the system off. It is supposed to remember where you left off, it doesn't. The radio would turn on on its own. When I wanted to listen to the radio it would always come on with the FM2 stations which I had never setup. I have had to reset the unit at least once every 2 weeks if not more. I've had problems with it since installation (12/23) until I took it out last week(8/24). The final reason I took it out was my APIM went bad ($300, overheated, I believe). The OEM APIM attaches to the back of the unit at the heat sink fins. I asked AutoTec Pro if I could return and possibly get 3/4 of what I paid for it back since it has never worked correctly. They said NO! Nothing about it was straight forward. This product should work correctly without having to do anything once installed. Hopefully people have better luck than I did.
Your video definitely helps the install of AutotecPro's display. I love this new display. Do you know a good Ford and/or Ford F150 boot logo that will work with this display? All the logos I found will either stretch it out too big or shrink the logo too small. The longer height of the screen seems to be the issue. Thanks.
I downloaded a few and use them. they seem to work ok. email me and I will send you the ones I have
The next option is a scanner and tunner built into the tablet and boom connectred under the dash. So once somthing flags up you can read what exactly it is. Just an idea
thats a good idea
Great video.. I have a few questions.. will I be able to keep my SiriusXm with of course radio ID updated..?
I have AT&T wifi build into what im assuming my Synce.3.4 will i be able yo keep service.? Thanks .
Yes you will keep the same radio Id I am using xm
@DeaninItYourself Thank you for getting back to me . The sync option sold me . 👍
Love this unit, I just have a question about the ac and radio controls? If you retain the ac control panel, why is it also shown right above them on the screen. Seems it would be nicer to have the radio functions shown at the bottom of the display in what would have been the original location. Can the display ac controls be swapped with the radio functions?
I dont think they can be swapped but i belive they can be disabled
Great step by step. Excellent! Thank you!
Something to be mindful of is static when working with any mother/circuit boards. Never do this on a carpet, blanket, or anything that can produce a static shock. It can fry them beleive it or not.
That is awesome. Wish I could get something like this for my Escape
you can
@@DeaninItYourself You get the dash kit for a 2013 titanium?
Hello great video, quick question can you still see the hazard button and traction control buttons with normal sitting? Thanks
depends on how tall you are. the 12 inch version you can see fine, the 14.4 inch version they are a bit hidden for the average person
@DeaninItYourself I noticed when you removed the sync display module from the dash there was one plugin for the factory usb. But then when you mounted the sync module to the back of the tesla screen there was two plugins one for the factory usb and another and it was a completely different module from the one you removed. I'm sure its nothing but. Could you please explain? Thanks.
I just bought one for my 2018 F150 with sync 3, 8 inch screen and auto climate control and it arrived yesterday Dec 18th 2023, Christmas present from wife. :) I will probably install it on Christmas day and im educating myself on the install watching your video. Fantastic install video by the way. Much better than the one autotecpro has, as you explain all the connections.
the removal video was from an removal i did on a different vehicle, because the footage from my vehicle got erased mistakenly, thats why it only had 1 usb port, the important thing is just to connect the usb from the port you removed it from on your model.
I'm looking at the 12.1" option for my 2019 F250 as well. Does the 360 degree camera view look like factory? Sometimes videos and pictures make it look a little funky. Also, does your truck have a 3rd brake light cargo camera, and if so, does this system retain that? Appreciate the video and any extra input my man!
Great Tutorial I’m convinced I’m getting one for my 2020 Raptor thanks 🙏
great video still happy with this. I hear sone of these are slow to start up and shut down.
I haven’t had any problems.
I just installed the same unit. Could you give a little more detail on what you used to setup the homescreen?
check out my other video where i talk about using nova launcher to setup the home screen
You are a GREAT TEACHER 😊
thank you for the kind words
Please give us a long term review of this product.
I will give a review
My uncle has this exact one in his 2017 F250
Do you have the courage to make a video about how to replace the batteries in the ADT alarm panel?
Thanks for the video !! I install everything with the video .. but he don’t have rca output at all to connect amplifier?
This unit for the ford does not have RCA outputs for amplifier, you have to do aftermarket amp install by tapping into the connections behing the back seat. It basically connects to your existing sync system
If my sirius still works, I'm all in.
Great Video! Would this display work on my 2015 Ford F-150? It has the Ford MySync (2), and not the 3.
Yes it will
Hello. You made a nice video, everything is fine explained perfect. But I have one question.y is 2015 platinum but doesn’t come with sync 3 I believe my come with sync 1. Do this works with my?
yes it does
Great video! Which year of the F-150 is compatible with this radio? Do you put a new SIM card in or use the one from my phone?
a new sim card. I got mine from tello.com. f-150s from 2009 - 2021
Hands down, the BEST how-to video for these epic screens. Thank you!! Side note/question...which SIM card did you go with? Any specific install steps for that? Thanks!
I just got one from Tello.com, but at&t and Tmobile will work. I just put the sim card in and did a reeboot and it worked
@@DeaninItYourself I have the ATT service through Ford but have never known about a sim card, it makes sense, but is there a sim card I should transfer form somewhere out of the stock unit? I just renewed my plan and hope I did not lose $200 for the year. Thanks
Hi, thanks for the great tutorial. May I ask if the back up & 360 camera display resolution better then the factory cloudy display? Thanks
It seems the same as factory to me.
@@DeaninItYourself Ohh ok, thanks for the response. I have a Raptor with the 8" Sync and B&O audio, I want to upgrade to this screen and hoping the camera quality may be better but guess not. Thank you so much for taking the time to response.
Thank you for the video! What sim card did you use?
tello.com
Thank you! This helped me install a similar headunit in my F150! Any issues with SYNC conflicting with the new headunit's system? Any issues with starup lag?
it is working just fine still, i have had it for about 8 months
Do you get a static, white noise sound when skipping songs using the steering wheel controls?
Thanks for the video! How does it sound?
sounds great