I like the simplicity of the videos, none of this silly music and overly required talk talk talk. Just the work, pure clean work. Highly accurate, deliberate and extremely effective. One of the few makers I watch straight away as soon as a video is released.
I enjoy your videos so much! You’re one of my favorite UA-camrs; your videos are ALWAYS interesting and informative. I love the way you start by showing what it is and what it does, then how to build it. I wish more woodworking videos did that. I also really appreciate the excellent camera angles and the lack of annoying background music. Your designs are always elegant and excellent. As simple as they can be - but no simpler. When I build my shop, I’ll be utilizing MANY of your designs/tools. Thank you so much for the outstanding designs and content!
Great video! Love to see modular jigs like this. However, the best idea in the whole video is the remote for the dust collector attached to the hose. Genius!
Excelente idea, video y construcción de esta herramienta que facilita mucho los trabajos de carpintería. Gracias por compartirlo. Gracias a este genio, JSK "Intelligent Hands" Koubou.
Once again, you amaze me with your talent. I really enjoy your videos and have learned so much from you. May I ask how many teeth are on your circular saw? And that saw is very quiet compared to a corded saw. I just may have to buy one!!
good day sir, im from philippines, My name is arnel, I like this jig so much but i dont have the tools on making it, Can you teache how? Or can you send me the measurement of where to put a hole
The sticker can be placed without accuracy on the curve. Then the fence rail is set to 90 with a square. You then just glue the maker at the zero point of the gradation on the the fixed surface. It's much easier (accurate) to fix the smaller pointer on after the potentially longer scale.
@@BryanHancocks But the scale is only going to be accurate if the pivot point is in the right place, right? I’m with Sapele Steve; I don’t understand how the sticker was placed for accuracy.
@@donny_bahama He has it set to 90 degrees, he arbitrarily set the markup, and then he simply glued the mark with the pointer to "0", that's all. You try to do this and you will understand how simple everything is.
Sir, what tape dispenser is that? Something available through amazon perhaps? I'm starting to use double sided tape a lot more, and that looks like a handy all-in-one tool
![6 Practical Drill bit Sharpening Hacks !!! [Subtitle]](http://i.ytimg.com/vi/dpPmYYexQJ8/mqdefault.jpg)
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
I like the simplicity of the videos, none of this silly music and overly required talk talk talk. Just the work, pure clean work. Highly accurate, deliberate and extremely effective. One of the few makers I watch straight away as soon as a video is released.
that has got to be the cleanest circular saw on the internet!
Thank you very much YOU TUBE and thanks to the sponsors and to JSK for your knowledge
I enjoy your videos so much! You’re one of my favorite UA-camrs; your videos are ALWAYS interesting and informative. I love the way you start by showing what it is and what it does, then how to build it. I wish more woodworking videos did that. I also really appreciate the excellent camera angles and the lack of annoying background music. Your designs are always elegant and excellent. As simple as they can be - but no simpler. When I build my shop, I’ll be utilizing MANY of your designs/tools. Thank you so much for the outstanding designs and content!
More than a shop you have a lab. congrats
Очень нравится смотреть твои ролики. Полезные вещи. Супер! Класс! 👍
What really makes this jig stand out, is the simplicity. Very nicely put together.
One of my 3 favorite channels! Pure genius.
I like this channel and all of his/her videos , less talking more on wood working , great job
ottimo
Great video! Love to see modular jigs like this. However, the best idea in the whole video is the remote for the dust collector attached to the hose. Genius!
Excelente idea, video y construcción de esta herramienta que facilita mucho los trabajos de carpintería. Gracias por compartirlo. Gracias a este genio, JSK "Intelligent Hands" Koubou.
海外から色々な言語のファンが増え続けて居ますね。アイディアの宝庫です。
This guy 👆🏼: Let me show you how to make a tool with....these other tools I made. Absolutely amazing
This solution it's for me the best easy from do not expensive it's a must in my work shop
Maestro!
A one-man perpetual design phenomenon. An engineering magician.
Keep 'er lit Bro!
Това вече си струва усилията. Браво
Yet another awesome jig shown in your meticulous manner....brilliant!
Even his fingernails are perfect!
As always another gem from a genius.
Excelente los proyecto; su utilidad es fantástica en el trabajo con madera, si se pudiera comprar mandar donde y el costo gracias
Man... You are the best of all....!! Love and support from India. Can you do a heavy duty panel saw build with precision sliding carriage?? Please.
Super broo good work super video
Muy buena guía... admiro tu creatividad...
Gracias por compartir tu proyecto..saludos desde Argentina 🙋🇦🇷
Wow, you are so smart. I don't need to buy a table saw if I saw your video earlier.
Where would this silent master be without his everlasting roll of double sided tape? I think I need to buy some myself.
I was thinking the exact same thing 😂😂
The secret ingredient is double sided tape!!
Once you start using it you find you can use it for everything. I wouldn't be without a roll in my shop for a minute!
A Canadian Woodworker
Red Green prefers duct tape!
Doug Vegan Paradise Builder Buy double sided tape and on the back are the secret to wood making mastery !!!
Good Job!! 👍👍👍👍
Muy bien trabajas
JSK-koubou,felicidades
Un grande lavoro grazie per il video Italia 🥰👍👍👍👍💯💯
Excelente los proyecto; su utilidad es fantástica en el trabajo con madera
Very nice concept. I will subscribe and build a copy. Thanks for sharing
Very useful jig . Thank you.
Хорошая работа и отличная идея. 👍👍👍Пригодится.
Nice job on your jig.
Beautiful and accurate.
ありがとう
Bonito trabajo
Ya me gustaria encontrar esa cinta doblecara que organiza también y se quita tan facilmente
Mal wieder eine Tolle Arbeit ⭐⭐⭐⭐⭐👍 Beste Grüße von Bergflitzer Foto Dieter 📸🤗
Always good tips. Make your own tools as needed
Sagenhaft, einfach super .
Super ce que tu fait comme outillages, c'est dommage que tu nous donne aucune mesure, sinon Bravo.
Really nice work, man! It looks fantastic and works great! 😃
Stay safe there with your family! 🖖😊
Cool! Very nice project 👍
Verry good👍
Your clip is very good. Good idea
bella idea davvero
Nice work as always. We posted this video on our homemade tools forum this week :)
great & great..good new day to have lots of useful videos 👍👍👍👍👍
Once again, you amaze me with your talent. I really enjoy your videos and have learned so much from you. May I ask how many teeth are on your circular saw? And that saw is very quiet compared to a corded saw. I just may have to buy one!!
may i know what model of makita cordless circular saw he used in this vid? is that a metal cutting circular saw?
How do you manage to work and keep the workshop so clean? I admire your work.
I assume that after every drilling, sawing or anything that causes a mess he cleans it up right away and stores everything at it's proper place.
My friend, the Cool Cool Cool...
davvero un ottimo lavoro
perfect!!!...again...TKS!
you are a really good craft woman
ua-cam.com/video/M1xYKw5FP-0/v-deo.html
you can see hes face now :)
Muy util implemento. Gracias desde Chile
Very good! I’m most intrigued by your clamps. Who makes those, I’ve never seen them before. Nice video
Good idea👍
Sua técnica é invejável
Thank you for sharing! What is the exact type number for the Makita Circular Saw?
Eres de las cosas, hay muchas, mas tontas del Universo Hermoso.
Eres una simple cosa.
No eres nada.
Estás nadificado.
Always great presentations and information ... thanks!!
JSK - I find your videos very enjoyable to watch. What model of Mikita saw is that?
You are amazing!
Best Jig Ever!
I think that Makita saw is your muse, you've made so many jigs for it
An interesting device. As always, excellent presentation of video materials. I wonder who is by profession.
Excellent, many thanks
Thats a nice idea.
Buenas noches, otra genial idea
عالی مثل همیشه.دمت گرم.
Лучшие DYI
I love your videos and how your shop is kept clean! Where do you get your aluminum extrusions? Everywhere I look is very expensive.
I like to buy your finished product so I can use it already. How much will it cost me including the shipping charges?
Excellent !..
good day sir, im from philippines,
My name is arnel,
I like this jig so much but i dont have the tools on making it,
Can you teache how?
Or can you send me the measurement of where to put a hole
Very nicely made jigs JSK! I am curious as to how you knew where to set the "0" mark on the jig when you attached that 0-45 degree sticker? 👍👍😉😉
The sticker can be placed without accuracy on the curve. Then the fence rail is set to 90 with a square. You then just glue the maker at the zero point of the gradation on the the fixed surface. It's much easier (accurate) to fix the smaller pointer on after the potentially longer scale.
@@BryanHancocks But the scale is only going to be accurate if the pivot point is in the right place, right? I’m with Sapele Steve; I don’t understand how the sticker was placed for accuracy.
@@donny_bahama He has it set to 90 degrees, he arbitrarily set the markup, and then he simply glued the mark with the pointer to "0", that's all. You try to do this and you will understand how simple everything is.
Felicitaciones, buen trabajo
Отличная работа , подскажите кто-нибудь модель этой циркулярки , я так понял она со встроенным пылесосом на видео.
Good diy!
Nice! Great Tool. THX - Tino
This is fantastic. BUT, if I could make one I would not need one.
You're briliant
Excellent
Super multitool!
Это супер-малка!
Лайк, та переглядів, вашому каналу.
You are the best!!!
Excelente!!! Gracias por compartir, ahora a replicar se ha dicho... 🤓👍
Bellissima idea molto utile
何気に角度の目盛りがオリジナルのステッカーだったのが驚き！
CADを利用すれば、
寸法通りの印刷も困難ではない、、、はず
Isnt that Makita circular saw a version to cut metal with plastic housing for metal particles?
The best and thank you!
Great Job! Did you purchase the pin and brass bushing? If so where?
Very nice
Sir, what tape dispenser is that? Something available through amazon perhaps? I'm starting to use double sided tape a lot more, and that looks like a handy all-in-one tool
I will follow you.
You should mound a magnet to it for the Allen wrench
Просто и надежно!
Excellent!!!
Cool!!!!!
Perfect 👏👏👏👏
Awesome work! Can u tell us where you buy the rails? Also can u make it easier to buy the plans by selling them on eBay or Amazon?