You prolly dont care but does anyone know of a method to log back into an Instagram account? I stupidly lost the account password. I appreciate any tricks you can give me!
This has to be one of the most calming channels on UA-cam for those with a Maker mind set. Always beautifully presented and simple in its approach. No unnecessary noise or distraction, just pure creativity and talent. Thank you ! I hope this finds you and your family safe and well in these troubled times. Greetings from Vienna = )
When I watch one of your videos, I can count on them being interesting, clever, beautiful, and WAY over engineered! That's what I like about them. Thanks for sharing the results of your clever mind.
That is perfection sir. I if you make a second sub fence for this, and instead of a pin use a 1/2" ali angle , you can make repeated dado's, and also use it as a edge guide. With a dado make first cut then using the dado fence, make repeated cuts by slotting the fence into the first cut, up against the leading edge of the dado, and repeat all the way up the workpiece. Then adjust for second cut to desired width, and repeat the cuts opening the width you desire. The dado fence slides in each slot. Using 1/4" fencecan work for thin stock, just change over. Using a router mat there is no need to clamp the workpiece. Simple!
I would love to see your workshop! It would be so cool to watch a tour video from you. I love all your builds and you inspire me daily to design and build! Thank you so much for sharing!!
Great build, might give this one a try myself! Only thing I would add or change for myself is a measuring strip indicating the outside dimensions of the cut. Because that's the dimension I would need far more often.
Right, the video is not explaining correctly the way to setup the distance meter. You have to determine the distance of the center of the drill. Note also that this distance is dependent of the router. In the video, it's possible to exchange the Makita and DeWalt. It's normal because booth are made by the same chinese manufacturer (we can find exactly the same device under Katsu brand or some others, with 3times less price). But take care of the measure : it's possible that a difference appears.
Wow one invention to a nother you really don't mess around this is one of the best idea by far Not only that,each jig is cut clean and nice, is Soo neet i like this kind of results,im kind a envy your skill man
Very exquisite works! There is a small idea that you can add a secondary scale, which is used for the reverse installation of the positioning pin, so that you do not need to install the extension rod. It is relatively small.
I've watched many of your videos , I like the way you construct your projects,, I really would like to make some of these tools myself , thanks for sharing your work .
A well made, easy to make router jig. Certainly good quality and absolutely fit for purpose. As soon as I complete my current project I will make one. Thank you for sharing.
Really nice. Recently I saw a circle routing jig made by Marius Hornberg that uses bearings to keep the router in the same position while you cut, avoiding the cable entanglement. But his is made of wood. Surely both your ideas could be combined to take advantage of the sturdiness of yours. Ty for the always amazing content. ありがとうございました！
Great design. I might have to do something similar. I should have plenty extrusion left over. I also have some machined aluminum angle to make this easier. It wouldn't be too hard to make an attachment so it can also be used as an adjustable fence too.
Really smart video, you should get a small milling machine for things like milling slots for clearance of tape measures/more rigid clamping for drilling metal components/milling in general!
Amazin work. And so soothing at watching. But another really interesting video for me would be the building of your vertical saw. Tried to find it on your channel ... in vain. Thanks
Your work is absolutely first class. I would like to try but cannot find a source for the various fittings and pieces you use - are they local to you or could you guide me appropriately. Thank you
5:45 You should put a couple nuts on that threaded rod before you cut it and grind down the ends, then remove the threaded rod after you are finished, and that will repair any damage to the threads caused by the cutting and grinding.
Hello, you make the best Woodworking Things ever seen. But i have a little Question: When i buy a Plan from Your side, in wich language do you make the Plans for not Japanese People?
Excellent work as always! Congratulations! I'm wondering why you didn't sand the aluminum to accommodate the ruler (~14:10) like you did in the ruler marking gauge project. Instead, you glued some ruler cuts. Works, but IMHO not as elegant as you're used to. :-)
Exquisite work, as usual. Thank you! I was waiting for you to apply the rest of the ruler to the extension - you had already snipped it off at 15:31. Once butted up and pressed down, you might have had to trim a bit of overhang off the end. I was also waiting for you to sand, grind, or saw down the center of your 40x80 extrusion, or the underside of the top of the planchette for the thickness of the ruler. Your method worked, but as others have said, not so elegant as your other work. Again, very nice, and as always, inspirational. Adam Savage ("Tested", "Mythbusters") wants suggestions for cutting circles; I'm going to suggest your video.
Great video, but tt the world can't make your device, it takes the hardware and ts the tools that go with it. I'm going to sign up for your channel and hope I can make an invention someday. What you're doing is too specific for me. 😊 Well done anyway. 👍
It would be straightforward to add a "no centre point" plate to this set up with a simple thin aluminium plate for double sided tape and a cross hair cut into it for alignment. Just a thought to add functionality to an already brilliant set up = )
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
You prolly dont care but does anyone know of a method to log back into an Instagram account?
I stupidly lost the account password. I appreciate any tricks you can give me!
This has to be one of the most calming channels on UA-cam for those with a Maker mind set. Always beautifully presented and simple in its approach. No unnecessary noise or distraction, just pure creativity and talent. Thank you ! I hope this finds you and your family safe and well in these troubled times. Greetings from Vienna = )
Хороший материал плюс золотые руки и отличная задумка,вот и все что нужно для создания шедевра .
When I watch one of your videos, I can count on them being interesting, clever, beautiful, and WAY over engineered! That's what I like about them. Thanks for sharing the results of your clever mind.
That is perfection sir. I if you make a second sub fence for this, and instead of a pin use a 1/2" ali angle , you can make repeated dado's, and also use it as a edge guide. With a dado make first cut then using the dado fence, make repeated cuts by slotting the fence into the first cut, up against the leading edge of the dado, and repeat all the way up the workpiece. Then adjust for second cut to desired width, and repeat the cuts opening the width you desire. The dado fence slides in each slot. Using 1/4" fencecan work for thin stock, just change over. Using a router mat there is no need to clamp the workpiece. Simple!
I would love to see your workshop! It would be so cool to watch a tour video from you. I love all your builds and you inspire me daily to design and build! Thank you so much for sharing!!
Artist, genius, perfectionist and brilliant.
Золотые руки и светлая голова! Спасибо за магию!
Really cool jig. I love the extruded aluminum, theres so many things that can be done with it.. nice job
Nice, die Befestigung mit dern Rundstäben finde ich gut. Ob es so ein massives Profil dazu braucht ist Geschmackssache.
Great build, might give this one a try myself! Only thing I would add or change for myself is a measuring strip indicating the outside dimensions of the cut. Because that's the dimension I would need far more often.
Right, the video is not explaining correctly the way to setup the distance meter. You have to determine the distance of the center of the drill. Note also that this distance is dependent of the router. In the video, it's possible to exchange the Makita and DeWalt. It's normal because booth are made by the same chinese manufacturer (we can find exactly the same device under Katsu brand or some others, with 3times less price). But take care of the measure : it's possible that a difference appears.
Wow one invention to a nother you really don't mess around this is one of the best idea by far
Not only that,each jig is cut clean and nice, is Soo neet i like this kind of results,im kind a envy your skill man
Very exquisite works! There is a small idea that you can add a secondary scale, which is used for the reverse installation of the positioning pin, so that you do not need to install the extension rod. It is relatively small.
In this way, the radius is longer and no extension rod is required
I've watched many of your videos , I like the way you construct your projects,, I really would like to make some of these tools myself , thanks for sharing your work .
A well made, easy to make router jig. Certainly good quality and absolutely fit for purpose. As soon as I complete my current project I will make one. Thank you for sharing.
Yet another meticulously planned and crafted design! Thanks for sharing!
Excellent craftsmanship. liked it very much.
You really make, the best Tools, total quality in your projects, 👍
Really fantastic work, dude! Looks beautiful and works nicely! 😃
Stay safe there with your family! 🖖😊
One of the best jigs ive seen
Bro, your designs and solutions are next level. Some of this stuff really blows my mind. Learning so much, thank you!!
Beautiful tool building as always. We posted this video on our homemade tools forum yesterday, credited to you :)
Thanks for the lesson and the tip I will try to create such a tool for my work.
Toujours minutieux et précis. Très belle réalisation. Merci et préservez vous.
Amazing stuff. Great design, and the precision with which you build is impressive.
Really nice.
Recently I saw a circle routing jig made by Marius Hornberg that uses bearings to keep the router in the same position while you cut, avoiding the cable entanglement. But his is made of wood.
Surely both your ideas could be combined to take advantage of the sturdiness of yours.
Ty for the always amazing content.
ありがとうございました！
Great design. I might have to do something similar. I should have plenty extrusion left over. I also have some machined aluminum angle to make this easier. It wouldn't be too hard to make an attachment so it can also be used as an adjustable fence too.
this guy is as good or better than anyone on You tube
Your ideas and builds are fantastic!
I always enjoy your videos from the west coast USA ... thanks much.
Your work always perfect
Your design always fantastic. Great job.
您好!看您製作工具是一種視覺上的享受,,你所製作出來的工具,精準度也很高,真棒~感謝您的分享喔!如果你能順便把零件材料規格尺寸圖表附上,我想信可以造福很多,喜歡木工的朋友們~也能更增加您的訂閱率與點閱率呦~感謝您!
Really smart video, you should get a small milling machine for things like milling slots for clearance of tape measures/more rigid clamping for drilling metal components/milling in general!
...you should MAKE a small milling machine... :D
@@mbrock5532 He already has - jisaku-koubou.com/archives/category/cncmake
fits both routers.....cool
Amazin work. And so soothing at watching. But another really interesting video for me would be the building of your vertical saw. Tried to find it on your channel ... in vain. Thanks
Super Arbeit
Dankeschön fürs Zeigen
Incredible precision. As always
Great tools make the easier
Хорошая приспособа!!!!!!👍👍👍👍👍👍
Love from France
Another excellent idea by an excellent inventor, GOD'S BLESSINGS ✝️⚾🙃
Good idea & good job!
Como sempre seus projetos são perfeitos, parabéns.
Parabéns suas ferramentas são de otima gualidade mesmo sendo feita por voce.
Works fine for a cordless router
A standard design, made to look fantastic - The circle cutter will outlast both or your routers.
Another excellent project and video.
качественное технопорно!
Very smart design! Thanks for sharing.
Your work is absolutely first class. I would like to try but cannot find a source for the various fittings and pieces you use - are they local to you or could you guide me appropriately.
Thank you
Nicely done as always,
Thanks for sharing,
Cheers
Good idea!
Ganz gut gemacht!
5:45 You should put a couple nuts on that threaded rod before you cut it and grind down the ends, then remove the threaded rod after you are finished, and that will repair any damage to the threads caused by the cutting and grinding.
素晴らしいですね！精度も高いと思いますし、丁寧で良いですね！
プランジ式のルーターなのでとてもきれいに円加工ができるようになりました！
依然作ったものはベースを取り換えなければならず、結構面倒な治具だったので今回作ったものは使い心地がいいですよ。
↓
ua-cam.com/video/Sf6lqFn_vCw/v-deo.html
JSK-koubou 様 そうでしたね！バージョンアップ、良いですね！
Hello, you make the best Woodworking Things ever seen. But i have a little Question: When i buy a Plan from Your side, in wich language do you make the Plans for not Japanese People?
Este artilugio es muy práctico, me gustaría hacerlo, solo que la placa de aluminio la haré de acrílico
Another excellent idea I loved
Great job
Excellent work as always! Congratulations! I'm wondering why you didn't sand the aluminum to accommodate the ruler (~14:10) like you did in the ruler marking gauge project. Instead, you glued some ruler cuts. Works, but IMHO not as elegant as you're used to. :-)
Отличная работа!
han har det hele .... han har mange værktøj til fuldføre samme opgave med flere forskellige værktøj ... det er alt for LUXSES
Exquisite work, as usual. Thank you!
I was waiting for you to apply the rest of the ruler to the extension - you had already snipped it off at 15:31. Once butted up and pressed down, you might have had to trim a bit of overhang off the end.
I was also waiting for you to sand, grind, or saw down the center of your 40x80 extrusion, or the underside of the top of the planchette for the thickness of the ruler. Your method worked, but as others have said, not so elegant as your other work.
Again, very nice, and as always, inspirational. Adam Savage ("Tested", "Mythbusters") wants suggestions for cutting circles; I'm going to suggest your video.
Super master !!! Нighest class !..
Awesome 👍👍👍Thanks for sharing
Good work, bravo 👍👏👏 Norbert (France)
Very impressive, so clever!😁
Hey. I love all your work. Is it possible you can list the products where to buy. So if we wanted to make this jig. We can !!! Thank you.
Absolute Spitzenklasse 🌟🌟🌟🌟🌟👍
Great video, what was that adjustable jig you used to cut the square shape with router?
Amazing.
perfect job as always 👍🏻👍🏻👍🏻👍🏻
Love the design, could you have used a piece of angled aluminum instead of the epoxy to form the support?
Great video, but tt the world can't make your device, it takes the hardware and ts the tools that go with it.
I'm going to sign up for your channel and hope I can make an invention someday.
What you're doing is too specific for me. 😊
Well done anyway. 👍
Космос, а что за клей такой что алюминий склеивает?????
Hi bro very nice. Well done.
nice jig
Здорово! А упор из алюминия или магния и если да чем вы его клеили? эпоксидка?
Buenísimo gracias por compartir disfrute mucho tu video saludos
Tudo com precisão hein!
Ты случайно деньги не печатаешь.. ВСЕГО НА СТАВЯТ А ОДИН БОЛтик К СКЛЕЯТ. А вот японцы просто КОСМОС.. ВАМ ДО НИХ ПРОСТО КОЛЕНКИ СОТРЕТЕ
素晴らしい。自分ではできない！販売できないでしょうか？
Hi, what is that black compound you are using to glue aluminum parts together?
Super.
It would be straightforward to add a "no centre point" plate to this set up with a simple thin aluminium plate for double sided tape and a cross hair cut into it for alignment. Just a thought to add functionality to an already brilliant set up = )
You have cool tools, could you use a nail instead of a pin?
Numero uno 1bravissimo e Italia biutiful e 🥰🥰👍👍
selamlar ustat harika çalişmalariniz var mükemmel ustat dedinmi boyle olmali yani usda demek isdedim kolay gelsin TÜRKİYE
Мастер!!!
Fantastic
Muito bom parabéns 👏👏👏
What is the marking tool you are using (@1m45s)? Is it a Mitsubishi clutch Pencil with a home made needle?
amazing job as alwais
buonasera , per il pagamento si possono versare solamente in yen oppure anche in euro?
Great idea! This is useful.
Excelente jig, parabéns.
アルミニウムプロファイルは2040または3060ですか？ありがとうございました
Show parabens, muito bom mesmo
I like a little more commentary in my woodworking videos