This is NOT your average case! v3000+
Вставка
- Опубліковано 3 жов 2024
- Today I take a look at the MASSIVE Lian-Li V3000+ Computer tower! This thing is NUTS!
Check out Micro Center’s PC Builder: micro.center/fbg
Submit your Build to Micro Center’s Build Showcase: micro.center/dca
Visit The Micro Center Community: micro.center/cmy
Get your JayzTwoCents Merch Here! - www.jayztwocen...
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2Jayz...
Jay, I think I speak for most when I say that we need a massive build video in this case. ALL THE FANS!
i was waiting him the whole video to build it
And in less than 2 videos in less than 3 months
> Biggest home desktop case in the world.
> Still no 5.25" drive bays.
0/10
How about as many fans as he can fit, consistent with the system being usable for ordinary people?
I would love for this to be the next skunkworks
The form factor alone takes me back to old old Skunkworks. I'd love to see you do a build in this, especially your personal build. Hardline tubing and all that goodness *.*
Do your personal build in that case with everything you can throw at it, and film the whole process, and release the videos step by step until the build is finished, that should give hours of content and I'm quite sure we would all love to see that here
A build deserving of the new X3D processors.
I don't think it would be hours of content, but if he stretched it, then probably a couple hours could be done.
@@smokyz_ A solid three videos seems possible depending on the scale and to what detail he's going into the build.
If he went into really customizing the case, I guess that could be another video.
So 1.5 - 2 hours of content?
Yes
Project done by 2026!
I think it’s fair to say that all of us that have been watching you for so long, want to see you do your personal build in this. Skunkworks was the whole reason I wanted to do custom water loops in the first place and why I now can’t build without a custom loop.
Yup. This thing has Skunkworks written all over it. We need that build
I swear to God a compilation of only Phil's laughs, wheezes, and actual deaths by laughter would be an hour long.
Can we get an upload of that compilation? 😆
+1 for the compilation 😂
Yes. Please.
Be prepared for more than an hour when some crazy dude makes a compilation. Props for this crazy dude 🤣
I think Phil has a lot more than 9 lives for all the times he died in the background.
Lian-Li really is leaving a big mark on 2022 cases wise, holy moly! 😲
Target clearly on the corsair 1000d that's aiming high lol
I would love to see a "Maximum Absurdity" style build in this Behemoth. Just the largest most insane components possible lol You could probably mount a dang house box fan to cool it
new epyc 9000 or at least threadripper pro 5995WX and 2 gpus (just mgpu support, no need for sli) plus intel arc for encode possibly on that second board
Check out YT channel 'Bro Cooling' with their V3000+ pc build its just 1 month ago video. Its the best existing build yet
All the rads
Don't give him weird ideas, Linus already lost a carrot to an industrial fan xD
I love when Jay's genuinely excited about a product review. You can almost imagine his tail wagging back and forth as he talks about the rad space lol
Jay's reaction to the Phanteks Enthoo 719 is the sole reason why I bought that particular case. His reaction to how amazing the water cooling potential is and how he called it "a water coolers dream"
Jay had me sold haha
I love it! It's crazy ridiculous overkill, but yes please do a build in it. As for the option to build a second system in the case I could see someone using it to house both their main PC, and a NAS server.
Damn that's a good idea the only problem is I think a ITX motherboard might be a little crap for a large nas
@@Threesnapnot a large nas, but you could build a decent size one.
Good reason why lian li dynamic range is so popular it’s the best case out there by a mile especially for that price range
i just really appreciate and adore the level of goofy and sillyness of jay and phil while also combining it with professionalism and knowledge for what you guys do, its just amaizing , i had such loud outburst of laughs in this video i cant even describe it , awesome video you guys!
Thats the genuine passion for their "jobs" and this sector. They love, no, live this and it shows.
@@1TheIceman1 yea indeed, love these guys and what they come up with :D
I remember building in the V2000 many years ago. That was THE case, although it had zero wire management, the build quality was second to none. I would love to build in a 343 or the 777 anniversary just for the nostalgia.
Jay, if you build in this case I think it would be awesome to have it look like the old “pipe” screen savers with crazy perpendicular runs. I know how hard that is but it would be such a cool idea.
That case is a beast! I designed a server off a Lian-Li case I was going to design my new home system after it. But now I might change everything after this. Thank you Jay!
This should go in a no compromise watercooling build video or series. I’m in love with it!!!
jay you absolutely need to do a build in this case. i got mine a few weeks ago and love it so much. its my forever case. i hope to see more of this case on your channel. happy building
Great case. Looking at Lian Li's website, you should be able to rotate the motherboard tray, effectively putting the GPU vertically mid case and have another radiator space in the back for a 360 or 420. Love it.
A new Lian-Li case ? Ok now this I'm pumped for, always great to see what they come up with. I don't think it's an understatement, to say they're arguably and in my opinion the best case makers on the market right now, in terms of quality, look and ease of use to build in. P.S yes, you gotta do a build in this case
Love seeing a giant proper ATX case back on the channel 👍
We NEED this build Jay. We need ALL the fans!
That looks like a good spiritual successor to the old Skunkworks case. I know you want to redo the old Threadripper build in its case, but if Intel ever released a new HEDT platform this might be the case to do it in
I really like the horizontal mount cases like the Thermaltake cube series
This case gives me caselab feels when they were pushing out monster-size cases with insane customization options.
you'll need extra long cables for fans/psu cabling etc, since distance between components is insane
This is my biggest problem with my Corsair 1000D... there's only one guy who makes extensions for corsair fans with RGB on ebay and they're pricy. I needed something ridiculous like 400.00 in just extensions so that I could cable manage everything "cleanly". I just can't bring myself to do it, it feels too over priced.
I wanted one of these the moment I saw it!
I've been wanting a dual system case for ages and none of them got me as excited as this beast.
I currently have two cases (O11D XL & O11D Mini) on my desk.
Phil is a treasure! Give him more screen time and a raise. Definitely a raise. 😁
Agreed! More Phil!
or a stool
*i see you phil* xD
Phil should be the designated filler for water-cooling system so Jay could "Phil it."
You have to do an overkill custom loop and fill up all the radiator spots. ALL OF THEM!
I would really like to see a full custom waterloop build in this.
Back in around 2001, I got the Lian-Li cube case (probably nobody knows what that is). It was meant for servers, and was basically double the width of a standard ATX case (and held 2 power supplies).
It was perfect for the experimental water cooling of the time, I mounted my pump, reservoir, second PSU (for peltiers), and radiator on one half, and the PC components on the other. And yeah, it was heavy….
I really wish I still had it. Never thought Lian-Li would be well known after all these years, it was totally unknown back then.
From what I see in the official video by Lian Li, this case like the upcoming O11 EVO XL has a fully removable motherboard tray. With the Phanteks D140 distro plate on the rear fan position that would make plumbing the CPU and GPU tube runs an absolute breeze.
Lian-Li was THE dream case like 20 years ago, they where some of the first premium cases to be found world-wide, I remember just dreaming about a Lian-Li ALU case back in 2001-2002 :)
Special thanks Lian-Li for ITX mount in it! Great sense of humor 🤩
How is it a great sense of humor? It's point is so people could have a second functuonal small format build in it. Some people use the dual system for streaming, some use on system for productivity and the other for gaming while the other is working on whatever its doing without affecting either rigs performance
@@robertlane5022 ah, ok. But anyway mini-ITX inside this garage 😄
@@robertlane5022 I would still love to see a mini-ITX only build in this just for the fun of it.
Personal build in this PLEASE!! Would love to see this thing in action.
I've got an 011 XL and I agree that it's overused, but it looks so clean. It's also a dream to build in and being able to fit 3 360mm rads is nice. I'm hoping Lian Li releases an "evo" version of it soon.
I also have one, but I didn't at all enjoy building in it because of cable management. Those HDD cages in the back just get in the way, and I found it a chore to fit everything in that little gap between the side radiator and the HDD cages. I ended up switching to a Phanteks Eclipse P600S so I could use 140mm fans and it was so much more enjoyable to build in.
Definitely overused but clearly for good reason
@@odhinn9 I don’t think the XL is overused, only the original O11 Dynamic.
Well, the o11 is cool but also boring.. since i went for the enthoo 719 / pro, i'm so happy using 2x 480, 2x 360mm radiators!
@praetorxyn I took those out first thing. I could definitely see how they would get in the way though!
I love big cases also. gives me room for what I wanan do and I dont need to worry about shoving things or moving things around
I bet you LianLi would be more than willing to send you a set of custom long length cables for their fans so you can use the fans in this case.
EDIT: I would love to see a build in this case just for the fact that I wanna see how amazingly clean the cable management would be with 12+ lianli fans running off a single controller.
Having completed multiple large builds with complicated loops… External rad with quick disconnects is 100% the way to go. Easier to service, maintain, and you don’t heatsoak the inside of the case.
Build it to the max. I am 59 and just recently built my first PC and used a Lian Li O11 Dynamic XL with a 360 AIO and 10 fans. Love Lian Li
Gotta love big towers. So massive, so much space for tech and air flow. Just delicious.
"My God! It's full of stars" que the 2001 A space odyssey music. We even had a few monkeys (Thanks Jay and Phil) using the monolith as a drum early in the clip. Hell yes! We want to see a build.
Finally! A case I might upgrade to over the 900d. Still lacks a top psu mount option.
I really would love to see a dual system build in this case! Of course with full custom loop(s) and filled up with fans to the roof!
The 011 Dynamic is a popular case for a reason. I did a build in one and hands down the best experience I've had with PC building.
He never said it was a bad case
A couple of ideas for builds:
1) “ALL the water cooling”
2) “A reasonably extreme gaming & streaming build”
3) “My entire living family tree gets a new pc in one case”
4) “The ULTIMATE super sff pc plus an efficiency apartment for Phil in one case”
5) “Air cooling is SO easy”
6) “I built an every purpose PC/Vending machine”
I love the added a grommet to run the graphics card cable down into the basement.
Lian Li literally said "hold my beer" 🤣
I was deadset on wanting to get the o11 XL ...........but I may have found my Dream Case
jay just build cool waterstuff , every idea that you have just do it ! :)
you can reuse the hardware, and we and you can learn from it
its been sooooo long since we have seen some custom watercooling
I really love this case actually thinking about buying one. I just wish there was more hard drive storage.
I absolutely love the wounded effect yall put in the video
Reminds me of my cm cosmos 2. That case was so overkill for what I wanted to add to it but it was so good having the room for extras.
Just like spongebob and patrick, a box can bring so much joy and unlimited possibilities
This case absolutely deserves a Skunkworks Revival!
I want to see a build in this case, I like the options and less wasted space compared to the Corsair 1000d
The O11 is definitely over-used, because it's awesome. I got two in my living room right now. Wouldn't dream of building in anything else, unless I fell into a pit of money and could go for a four rad watercooled system, just for the heck of it. Lian Li is killing it with the fans, the AiO, the cases, the strimers and even the software.
Dew it!!!
Radiators all over, just for giggles!
Build system in this thing, stat!
I still rock Lian Li's PCV1000 as my media server. I've had it for 15 years and won't ever give it up. They just don't make them like they used to.
Build in the v3000!!! I miss the skunkworks build days. Also that motherboard tray is removable.
YES! Please build in this case.
Also what would be cool is make a full game room box. Beast pc with a ps5, Xbox series x and switch all in one case. You for sure have the room to make that work
This has to be the first case ive seen in ages where I have genuinely wanted one at first sight, its awesome bring back monster pc cases, I pride myself on having a pc that realistically shouldn't be moved by one person.
Reminds me of one of my first builds in the early 90s having a huge case.
I had a Cooler Master Storm Trooper about ten years ago that I absolutely loved just for its sheer size and ease to work with. If I had the room, I definitely would have gone with another super tower for my last build
I think the BeQuiet! Lightwings would do great in there.
Do a build Jay, with all fans and an Aio. would love to see how it performs.
There must be a distro plate available for the motherboard tray fan slots, that would 100% be cool and the maybe a smaller pump on the bottom of the case for that extra power
Man that's gotta be at least as big as my SMA-8. Loved the builds you did with that, Jay, so had to get one. So many options with this case though! Great review.
this thing has 3 features ive been looking at this case for weeks now and they are as follow: regular, dual system, and rotated. Hes already talked about the first 2, but the last one is you can rotate the motherboard tray 90 degrees counterclockwise. build it in all three aspects please.
As a (VERY) small streamer and *ahem* old computer builder, part of me wants to build in a case like that. My current case is antique, I can't even remember the model I just know it's an Antec from 1999. I love it, you'll pry it out of my hands when I'm finally forced to outgrow it, not due to size since it is a full tower case, but it doesn't have cooling options to keep up with any current graphics card. I'm running an i7-8700 and an nVidia 1070 and it stays cool even under full load; I can only imagine how much stuff you could cram in to a case like that and still be able to keep it cool.
Loved to see the announcement for this monster of a case. Seeing this "in person" kinda just upped the excitement for it. Only gripe are the fan mounts... Did they really need to put THAT many different options for mounts on there and essentially block like 50% of the fans airflow? Makes you wonder about the noise too...
Yes!! Build it! 1 system. Crazy overkill! Insane cooling! I would love to have a no limits build in that case.
Love the V3000. Skunk works was reason I subscribed and started watching. was never able get a massive case tho the TT X71 has served me well for 7 years now.
I was lucky enough to track down an original V3000 and went dual loop and was actually able to mount a 120mm Rad on the rear exhaust as well so total of 4 rads in it. most amazing case I've ever built in and love all the capabilities it has.
That is massive! Can't wait to see a water-cooled and air cooled build with this beast, Jay.
It reminds me of a modern version of the Cooler Master Haf series, the 935 and 915 stacked. I love the heck out of that case and use it for a Plex server!
I must say I am upset I didn't see this case sooner. I JUST finished my build in an O11 Dynamic because it was the only case I could find that has space for my chonky as heck dual 360 rads. Now I find out there's a case that I could have super beefed up my cooling for even more insane over clocks.
Same here. I bought the Phanteks Enthoo 719 after seeing Jay's video about it, but now I am thinking I should have gone with this case instead
Yes, Maximum water-cooling build. Fill all the possible rad spots. All the fan spots. Everything!
I’ve purchased 3 Lian Li cases, the O11 Air mini, the Dan A4, and the A4 H2O. All have been very well manufactured and designed, but for this case, it feels like an oversight to have the side fan mounts to just blow into the side panel without any intake/exhaust, unless if you’re using it just as a reservoir
We're ready for a Jay overkill watercooling everywhere build!
You can also turn the mother board tray around and mount it in different ways. I like the face down look in this case, that’s why the grommet is besides the psu
With all the radiator space, I'd like to see how much of a system you could build in it and passively water cool it without fans.
PLEASE do a build with this case for us to see. A build for this case will take planning and it's going to need to be something special. So no pressure. lol
that is a great looking case with tons of options..i think you should do a build for us in this case..
I love Phil's editing!!
I really like the case. Glass side panel could be a little lighter tint. Would love to see you build in it @JayzTwoCents
That is a beast of a case. Be very aware of its size and weight. Especially when you have finished building your system. Wherever you put this case, it stays there. It's weight will be insane.
personal rig in it with the maximum amount of Rads!!! Single System, but i want to see a 7950x overclocked to the max running sub 60c under load.
build in the damn thing please jay im drooling over this case
Jay just totally fan-grilling for this case is good content!
This case deserves at least 1 build in it :) Do it Jay, would be fun.
Imean its like that caselabs case, Jay needs to put a build in it
Yup this will be the next case for me. Replacing my view 91. Love the cases with rad mounts on the bottom.
My first build i did myself was in an antec 1200. Overcompensating for nothing in a big boy case is the way of life. I totally get why you love it
I would actually love to see a video of you building with this case!
Jay I feel I speak for everyone when I say this. Please do a big build in this case. I need to see a build in this case. I’ve been wanting to see you build in the Corsair 1000D for a while now but I really wanna see a build in this case. The possibilities in this case are endless with this one
1000D would be dope
nice upgrade from my original v3000. will buy as soon as it comes out
I love the case and would for sure run dual systems in it. One system can be as a server for my games.
I think Lian Li is coming out with fan group extension cables for the SL120 V2 fans! I see some on AliExpress. I do not see them on Lian Li website yet though. I did read somewhere that they are coming though due to the large amount of feedback advising cables are too short for high-end builds. Lian Li is pretty responsive to the fanbase! C'Mon Jay, you KNOW you want to do your next ultimate build in this case...and we WANT to see it!
I need this Jay energy on every video!
a bit of a throwback to the Caselabs days. Man I miss those.
As an owner of the older v3000 case, I love some of the improvements they made in the v3000+
I really love my dual system build. Thing that I see every DS case getting wrong though is the layout; I'm using the Enthoo Mini XL which has mATX + mITX setup with both of them vertically mounted, mITX above mATX. It makes it so there's a much more reasonable looking main compartment and the mITX can have an actual cooler and GPU instead of the other version where the mITX lays flat and has no room for a good cooler or dGPU.