I once had a 1928 Ford Truck with a 365 hp 327 V/8..30/overbore, spacers, headers...power to weight ratio bordered on mental health concerns. Stamped on the motor, was "MT"...the assumption, was Mickey Thompson. It was an old build, with non-stainless steel valves etc...but a very reliable build. The 327 was just so fun to fondle.
Mad skills. I ran pipes under the axle, once. Couldn't jack the car up without the rear pushing down on the pipes. I ended up going right out the sides before the rear tire. Loved it. Keep up the good work!!!!
He obviously won’t have that issue considering he installed it with the rear suspension already at full droop…just like when you run it over you’re supposed to have the car at ride height plus another 3-4” of clearance between the axle /exhaust MIN👌🏼
Incredible work on making that exhaust just right. I watched the professionals construct a dual outlet exhaust on my '78 deVille. I made them redo it because they hadn't done the kind of work you do. This car is my second deep dive into your work. The CTS-V drew me in. This car is beautiful. Good job Chris.
Bro...Ever since I was a kid, I've always wanted a 69 Camaro. You are literally living my childhood dream with this build. Congratulations! It's a beautiful car, it sounds great, and honestly you look exactly how I'd feel during the entire drive! LOL Great content man, keep it up!
I have 1 7/8” long tubes on my lsa supercharged iron ls3 nova with 3” exhaust that exits right beside the door jambs with 12” glass packs…..its sounds amazing and sets off car alarms everywhere…..you can hear me from a half a mile away……. It wont be long till your adding boost to that beatiful camaro….promise you that!!!!…..nice job, your attention to detail is second to none brother…congrats
The segment starting at 23:00, was awesome. Great music selection to roll into the finale of the exhaust work; those shots of the whole system completely mocked were amazing. Keep up the great work on the cars, and your editing.
Would of loved to see the Camaro at the Bass Pro Shop cruise night but I’m leaving Massachusetts for good in January. Awesome videos Chris and killer cars !
Enjoy the 69, i know that feels great building such a badass machine and knowing you did that👍 The left side hangs ever so slightly lower from the rear view but it's basically perfect! I'll eventually be doing my 68 and can't wait!
I'm new to your channel and I've watched the couple of your videos so far and I will give you credit you are a particular on details and learning a lot
This what you call dedication beautiful work my brother keep it up you going to get that UA-cam plaque I'm going to subscribe in your Channel right now with a like God bless
The car dying coming to a stop had the same issue on my 67 ls swapped Camaro needed a speed sense wire ran from the tac to the ecu. Might be the issue, or just needs a proper tune. Sweet build looking forward to more videos
I've only seen a few pictures of exhaust running under the rear end on 1st gen Camaros. I thought they would hang too low, especially on lowered car, since this car has a ridetech 4 link. I also thought they looked tacky or half-a55, but man, I'm gonna do mine this way. I appreciate the detailed video on how it really looks, and I must admit, it's awesome and more simple this way with less material and less bends.
If your keeping thr brake booster and not going hydro, I highly suggest a cheap vacuum canister in line. Helped my truck A'LOT when I put on big tires. Sounds like you have a good size cam. Youll know when its in correct. Brakes will be a rock if the routing is backwards. Camaro looks great!
I think you done an excellent job and your welding up hill is a plus. But the tale pipes I think was a little to close to the body and could result in burning the paint ,but overall I think it's an awesome job and very clean workmanship. I own a 22 2ss camaro and I am ordering some side skirts from American muscle carbon fiber side skirts. Thank you for the video showing awesome video and have a blessed and great day in Jesus Christ mighty name Amen 🙏
I really like you work and the cars you have with the black out very nice bro and that red Z-06 is sweet too you must like fixing up your cars wish I had my own garage to finish my Honda Civic but I do want to get something with a V8 so I can swap it with and LS motor maybe one day huh but I do like your set up bro great job 👍👍💯
Awesome build man! If you ever want to tone the exhaust more, look into the vibrant ultra quite resonators.. and a little tip on your rear hangers, bend them in a L shape on top of the pipe. That way you can’t see them
Love the car, I have a 69 my self. Just my opinion, no disrespect. Bullet mufflers give the engine a "muffled sound" To me It sounds like the engine is covered with a sleeping bag or something😂 the cars that run spintech mufflers create the most raspy and crisp sound... would love to hear It with spintechs...just my opinion brother, love your car...
With a LS376 /525HP, would you go 3" exhaust for daily driver or 2 1/2"? many mixed opinions on this topic! I want the throaty sound but not sure what to do? Is 3" for track full throttle? You are amazing at everything you do and I would love to have your skills when "doing it right" every time.
I once had a 1928 Ford Truck with a 365 hp 327 V/8..30/overbore, spacers, headers...power to weight ratio bordered on mental health concerns.
Stamped on the motor, was "MT"...the assumption, was Mickey Thompson. It was an old build, with non-stainless steel valves etc...but a very reliable build.
The 327 was just so fun to fondle.
Hands down, the best looking Camaro I have ever seen.
A-1 SUPERB! Relive old glory days!
Love to see the growth man! You’re gunna be a big UA-camr you watch. Love the builds buddy, absolute chad.
100%, he's got all of the components. People say forums are dead but I learned about Chris on LS1 Tech.
100% I just stumbled on a video of his 3 hours ago and now watching all of them lol Keep it up Chris!!!!
@@jtpbuildz959haha same here!
Thumbs up because I’ve been that guy numerous times. Nothing like the first cruise.
All your vision. How gratifying. Beautiful work and thanks for sharing.
Mad skills. I ran pipes under the axle, once. Couldn't jack the car up without the rear pushing down on the pipes. I ended up going right out the sides before the rear tire. Loved it. Keep up the good work!!!!
He obviously won’t have that issue considering he installed it with the rear suspension already at full droop…just like when you run it over you’re supposed to have the car at ride height plus another 3-4” of clearance between the axle /exhaust MIN👌🏼
Don’t like under the axle. Rest of car is amazing
Incredible work on making that exhaust just right. I watched the professionals construct a dual outlet exhaust on my '78 deVille. I made them redo it because they hadn't done the kind of work you do. This car is my second deep dive into your work. The CTS-V drew me in. This car is beautiful. Good job Chris.
Your enthusiasm is awesome and I can relate to your busted knuckles 👍🏻 Sounds great
Much props 2u for the time & investment on your project 🫡
Bro...Ever since I was a kid, I've always wanted a 69 Camaro. You are literally living my childhood dream with this build. Congratulations! It's a beautiful car, it sounds great, and honestly you look exactly how I'd feel during the entire drive! LOL Great content man, keep it up!
V8 content is life for me. 🔥🔥🔥🔥✅💥
I love the Camaro Elaneor look of this car! Great job, on a great car!
Sounds great. My favorite year model and one of my favorite motors..
Awesome work Chris watching from New Zealand
Hey man good stuff. My God 3 Chris's. You, Chris Fix and Chris and Jen. You guy's are addicting to watch.
You're a BEAST bro!!! 😯😯 That exhaust looks like Motordyne's. Gotta RESPECT anyone who tackles his own vehicle needs....and you got mine! 💯👍
I have 1 7/8” long tubes on my lsa supercharged iron ls3 nova with 3” exhaust that exits right beside the door jambs with 12” glass packs…..its sounds amazing and sets off car alarms everywhere…..you can hear me from a half a mile away……. It wont be long till your adding boost to that beatiful camaro….promise you that!!!!…..nice job, your attention to detail is second to none brother…congrats
Best channel on UA-cam! So mad I didn't have my notifications on but now I have content to watch at work
The segment starting at 23:00, was awesome. Great music selection to roll into the finale of the exhaust work; those shots of the whole system completely mocked were amazing. Keep up the great work on the cars, and your editing.
Love the build, Clean install
Dude it sounds so good, as per usual… killer job man 🤜🏻🤛🏻🤘🏻
Sounds and looks beautiful man. Easily a SEMA car in my book. 47:25 Nothing like finally seeing your hard work pay off.
man I can't get enough of this channel. The content is so good!!! Keep up the good work.🔥🔥🔥🔥
Agreed.
Yeah, just discovered it today. Easily one of the best automotive channels
Would of loved to see the Camaro at the Bass Pro Shop cruise night but I’m leaving Massachusetts for good in January. Awesome videos Chris and killer cars !
Love the Busch Lite product placement.
Enjoy the content, great upgrades and refinishing conditioning of paint jobs and interiors. Keep up the good work…
That cam chop is just ✨chef’s kiss✨ 🥵🥵
Sounds bad ass, I’m LS swapping a 69 Firebird right now, Good job brother.
Another Great CS video. Surprised you don't have sponsors yet. It's comin for sure. Keep em coming
AWESOME CONTENT LOVE ALL CARS YOU WORK ON .KEEP IT GOING.
How the hell did you get me to watch over 50min video 🤣Nice work! Your fleet is sooooo clean. Keep it up!😎
That exhaust is perfect artwork! Nice ride too!!😎
That exhaust is awesome,really good work.
Enjoy the 69, i know that feels great building such a badass machine and knowing you did that👍
The left side hangs ever so slightly lower from the rear view but it's basically perfect! I'll eventually be doing my 68 and can't wait!
I'm new to your channel and I've watched the couple of your videos so far and I will give you credit you are a particular on details and learning a lot
I discovered you recently your gonna be something special. Keep up the good work. Love the content
This channel is so under rated, this thing is gonna take off, awsome vid bro 💪🏼
Fantastic work and one beautiful ride. 🙌
She helped with the good and hid at the same time. Amazing work LOL
Love this channel you always get stuff done ✅
Awesome skill set. Sounds incredible!
Great job man. Car looks and sounds amazing!
Beautiful car Chris. I really hope I can get a new project in a few years.
The Camaro is sweet. The exhaust sounds sweet!
those welds🔥 very good job exhaust makes it sounds very nicee !
Damn, She sounds amazing. First video I’ve ever seen of yours! Amazing job on the exhaust. New sub.
Chris your Cameron came out unbelievable
Just to drive and feel the rumble and sound in this magnificent car is absolutely incredible. Great job bro.
Amazing and a true muscle car. Very envious right now 😕😕👏👏🇬🇧
Nice work, currently planning a New Shop and watching this makes me want to add an old camaro to the resotmod list. Stay Strong!!
Yes! 😊Great video as usual bro
This what you call dedication beautiful work my brother keep it up you going to get that UA-cam plaque I'm going to subscribe in your Channel right now with a like God bless
Looks and sounds killer Chris!!
You have all rights to be excited and proud of your work product.
The Camaro is a beautiful and exemplary example of the 70 to 80 muscle cars.
Except this is a 69…and the muscle car era was actually 64-72 (74 arguably by some).
Nice Job Chris! Looks and sounds great, welds look Cleaaan.
The car dying coming to a stop had the same issue on my 67 ls swapped Camaro needed a speed sense wire ran from the tac to the ecu. Might be the issue, or just needs a proper tune. Sweet build looking forward to more videos
Impressive. Ideal look and sound!
Subscribed at the startup!
That's one beautiful car
Sounds great! Sounds like "Hot For Teacher" by Van Halen at the 12:30 time marker. Nice "69
Sounds incredible, love the radical idle 😁
Nice ride! Great job! Watch out on the plastic wrap sometimes it’s transfers the glue to the surface….I change it out every two months!
sounds good! you should be very proud of the work you have done not something many of us would do !!
I've only seen a few pictures of exhaust running under the rear end on 1st gen Camaros. I thought they would hang too low, especially on lowered car, since this car has a ridetech 4 link. I also thought they looked tacky or half-a55, but man, I'm gonna do mine this way. I appreciate the detailed video on how it really looks, and I must admit, it's awesome and more simple this way with less material and less bends.
If your keeping thr brake booster and not going hydro, I highly suggest a cheap vacuum canister in line. Helped my truck A'LOT when I put on big tires. Sounds like you have a good size cam. Youll know when its in correct. Brakes will be a rock if the routing is backwards. Camaro looks great!
What vacuum. lol.
Man that car is freakin BAD ASS!!! Nice work man!!
I think you done an excellent job and your welding up hill is a plus. But the tale pipes I think was a little to close to the body and could result in burning the paint ,but overall I think it's an awesome job and very clean workmanship. I own a 22 2ss camaro and I am ordering some side skirts from American muscle carbon fiber side skirts. Thank you for the video showing awesome video and have a blessed and great day in Jesus Christ mighty name Amen 🙏
Dude you're amazing!
Your attention to detail is beyond me!
Also spotted out your LKQ sweater wear I use to work!🤣🙌🏿🔥
Luv it!! What a monster!! 🦖👍🏻🦅🇺🇸
Excellent work! When u said it was rich, did you smell a strong odor out the pipes than would literally burn your eyes?
Looking and sounding great!
I really like you work and the cars you have with the black out very nice bro and that red Z-06 is sweet too you must like fixing up your cars wish I had my own garage to finish my Honda Civic but I do want to get something with a V8 so I can swap it with and LS motor maybe one day huh but I do like your set up bro great job 👍👍💯
Sounds great…. Man like those vale covers I want a pair
What temperature does you ls run at? Great videos! Your hard work really shows.
Great job. Sounds KILLER man!
New here ! Great job on that exhaust. Love the Camaro
Great job on exhaust! That is a very nice Camaro.
Well done sir. Love the build. You are a master at your craft.
Thing is a monster!!
Awesome Job Bro, attention to detail on point.
That Thang look Pressure outside Dude OMG.
Great Job man I want my Garage just like yours Grind time Yes Sa Yes Sa.
You have a car to be proud of sounds great!!!
She sounds amazing!!!!
Amazing job, lives a really dream
Love your builds bro you do a great job an it definitely sound beastie 🔥
Awesome build man!
If you ever want to tone the exhaust more, look into the vibrant ultra quite resonators.. and a little tip on your rear hangers, bend them in a L shape on top of the pipe. That way you can’t see them
Phenomenal work Chris!
Chris, looks and sounds great, only thing I would change is lowering it about an 1.5 inches in the rear maybe inch up front, just my taste!!👍👍👍
Beautiful work! Great car.
Those welds are great on the exhaust
Love the car, I have a 69 my self. Just my opinion, no disrespect. Bullet mufflers give the engine a "muffled sound" To me It sounds like the engine is covered with a sleeping bag or something😂 the cars that run spintech mufflers create the most raspy and crisp sound... would love to hear It with spintechs...just my opinion brother, love your car...
That car is a show stopper
Hi nice camaro what center console is that?
Awesome build! Did you tune your terminator x max yourself or are you using the self learn feature?
Always phenomenal work, super cool builds🔥🔥🔥🔥You should open up your own speed shop!
What bullet mufflers are those. Plz drop the link. I love the way they sound. Wanna see how they will sound with my 408lsx in my 3rd gen camaro
With a LS376 /525HP, would you go 3" exhaust for daily driver or 2 1/2"? many mixed opinions on this topic! I want the throaty sound but not sure what to do? Is 3" for track full throttle? You are amazing at everything you do and I would love to have your skills when "doing it right" every time.
Awesome brother!!