Yeah sometimes people don't understand that these certain engines that don't have adjustments and only have Springs can be stuck and it will take clean off on you and destroy everything in front of it including three-wheelers when you put the sleeve back in for the throttle cable on their carburetors backwards they will take off on you as well being that I'm a person that experienced that one day and thank God it hit a tree and went on its side and did Donuts till I caught up with it
❤❤THESE CHONDA MOTORS HAVE SOME REAL CHEAP LOW QUALITY METALS USED IN THERE CONSTRUCTION ,THE FUEL NEEDLE IS NO DIFFERENT AND FUEL REACTS WITH THE METAL MAKING UP NEEDLE ,CORROSION AND THE NEEDLE CAN GET STUCK UP AND IF THE FUEL DOES NOT HAVE ITS OWN SEPERATE FUEL TAP THE NEEDLE CAN GET STUCK AND THEN WILE SITTING THE FUEL RUNS THRU THE CARBI STRAIGHT PAST PISTON INTO SUMP AND YOU GET FUEL OIL LIKE YA DID ..I THOUGHT YOU BOYS WOULD HAVE HAD PLENTY OF CASH BETWEEN 3 OF YOU TO PAY THE GUY TWO HUNG FOR IT ,,HE MAY HAVE BEEN REAL POOR AND TRYING TO PROVIDE A GOOD CHRISTMAS F9R HIS FAMILY ,,YOU GOT A REAL GOOD CONDITION CAET THAT RUNS DAM GOOD SO YOU SHOULD BANK HIM A FEW EXTRA DOLLARS !!! AND DONT BE SUCH STINGES JUST BEFORE CHRISTMAS ,,YA ALL COME FROM FAIRLY WEALTHY FAMILIES ARE YOU NOT !
I'm most happy when Ike & Charles do these videos duo style. There is no holding back, and just pure fun. Straight to the point, then a good thrashing.
i scored an 85 dingo, complete with perfect seat and original wheels and tires, for 50 bucks! got a predator for it, some tubes for the tires, a new torque converter (old one was missing a lot of parts) and im about to go nuts with it
You need to do a series on this one. A lot of first time cart owners would get a lot out of it and the first rule of any endeavor is to spread it to grow the hobby.
A Kilowatt and Explorer are two of Murrays best gokart frames in my opinion. I would highly suggest welding a third bearing hangar to the engine plate underneath the flywheel side to keep the axle from bending in the center. Dingo's like to bounce a lot in the rear
The Baja is far superior to the Manco Dingo (despite being identical) because it says Phoenix on it. I knew this was a smokin' deal when Charles did the "tilt and drop test" at 4:45 and the floor didn't fall out or cover the ground in a carpet of rust. Basically you got an entire go-kart for the price of a ... um ... torque converter? P.S. Thanks for the great reminder WHEN PURCHASING A VEHICLE...$5's, $10's, and $20's evenly distributed in at least three pockets. Ike knows this, he just wanted to teach us a lesson we wouldn't soon forget.
An excellent episode this week gentlemen. Thank you for educating us viewers out here and the nice variety you do each week is always a bunch of fun to learn from. The many projects you film are very entertaining. Cars & Cameras is awesome! Happy Holidays gentlemen; please be safe and keep creating the great episodes you are experts in doing.
I recently purchased a good quality used 4x4 quad from FB marketplace. I have been watching many of your videos for the past year or so, and you've inspired me at 52 y.o. to take up riding quads again! Thank you from a guy who rode them in the 1980s and rediscovered a fun hobby! I enjoy your content and can't wait to see the dragster and drag minibike crack 100mph!
Excellent video Isaac :) , Charles :) also nice find on a Dinko go kart price and parts upgrade too ! Super Job you guys did on this one and have loads fun to! Flush tank with Vinegar and Water together do thru petcock plus hose to it help lots !
Hi, my name is James DeGood. I'm a Freshman studying to be a Mechanical Engineer at Kettering University. Over the past two years, I've built an offroad go-kart with all-around suspension. This started after I watched your guy's video of the Manco Dingo ripping at Busco Beach. So I decided to pick one up myself and start my own project. I've watched your guy's channel for a long time, watching crazy builds coming to life, and I wanted to make my creation. You guys have much more knowledge and expertise regarding anything go-kart related, and I'd like to know if you guys have some advice to improve on my build. The kart has 24-inch tires in the rear and 21s in the front. It weighs anywhere from 250-350 lbs. It has the front half of a tao tao quad, and the frame started as a Manco dingo. It is powered by a 1986 Honda 200sx quad motor with a 5-speed transmission with no clutch. Some things have changed since these pictures have been taken. This includes putting rear suspension in place of the rear bars and upgrading from a mechanical disk brake to a hydraulic disk brake with a 10-inch rotor. The steering has also been changed from a butterfly setup to a full steering wheel with a rack and pinion. Any and all advice would be extremely appreciated as I know you guys are very busy. Thank you guys for being awesome.
Some people are mentally lazy and will miss a lot of good stuff in life because of it ... James , it sounds like you have a pretty good jump on your build as it is and I am building/rebuilding two different carts at the moment - one is a 05 tomberline crossfire150 that I'm keeping all stock and just piecing back together a little at a time and finally just got to ride it for the first time day before yesterday while the other one is an Kazuma mud buggy with 440r two stroke off an Arctic cat snowmobile which is in about as bad of condition as it could be without just scraping it 😂 ... It's going to be a long time before I can ride it and it's all about just taking your time and doing a little bit of work here and there when you can and do not give up but stay on it and eventually it will be finished and you can enjoy the fruit of your labor so the advice I have for you is don't watch these channels and think your going to do the same work in the same amount of time because if your not able to then you'll get discouraged and give up , been there and done that , but instead just take your time and keep adding to it as you go ... be safe brother and keep working at it ...
Just traded two cast iron pans for a running kart with a cut up cage on it with a 11 hp Briggs and new torque converter set up that had a stopped up carb I have another cage for it
Ike should drop in a built/bulletproof 6.5 IDI turbo in that burban! Not too many go karts for sale out here in the midwest/great plains for cheap. But I do keep any eye out for them
Man in May i bought a manco 285 (like a Dingo but it has a seat for 2 kids, just a slightly wider one) for $300 with the engine, got new tires and paint and a smaller sprocket, just didn't calculate the fact i live in the suburbs and we have absolutely ZERO dirt! A real shame but im moving out soon hopefully to a place with a big yard!
had the same kart in yellow and had a quad as well never will I own something without suspension again kept the quad little 88 yamaha moto 4 350 great machines
Have you ever thought about using motor mounts for a FWD car along with swingarms to soften the ride? They are heavy duty and are much cheaper than using shocks.
They have done an all wheel drive one which was literally 4 212 engines mounted above the wheels on stands, it's really goofy but so fast. Apparently FWD on go karts gets bad with shooting off in one direction but I'd love to see it attempted
Whats the story with the 3rd gen camaro... ive seen it in the background a few times... super interested in whats going on with it... id love to see you guys build that 3rd gen..
I had that same minnie bike. Did that one have a flat piece of steel for a brake pad? Things have come a long way since then. I also had a Bunelly 50 trail bike, I don't think I spelled Bunelly right, that way in the early 70's, but I do remember that smell of that new trail bike, there's nothing like it.
replaced a carb filter on a 10 horse briggs concrete mixer. had nothing so I used an old winter beanie, and a folded leather glove I didn't need to keep the polyester from burning.
I think ya got the deal of lifetime starts 1st pull prob run forever in its stock form great find speaking of find who's old 90s z-Camaro that's my dream build love that body style iconic 350 iroc z🏁❤
Thumbs up for the Ike & Chuck special!
I bought a 2 seater full size that runs with good suspension for 200
Yeah sometimes people don't understand that these certain engines that don't have adjustments and only have Springs can be stuck and it will take clean off on you and destroy everything in front of it including three-wheelers when you put the sleeve back in for the throttle cable on their carburetors backwards they will take off on you as well being that I'm a person that experienced that one day and thank God it hit a tree and went on its side and did Donuts till I caught up with it
Yal should do cheap vehicle challenges between all 3 of you
Lots of laughter and a big smile, Big Hug Boys🤗
❤❤THESE CHONDA MOTORS HAVE SOME REAL CHEAP LOW QUALITY METALS USED IN THERE CONSTRUCTION ,THE FUEL NEEDLE IS NO DIFFERENT AND FUEL REACTS WITH THE METAL MAKING UP NEEDLE ,CORROSION AND THE NEEDLE CAN GET STUCK UP AND IF THE FUEL DOES NOT HAVE ITS OWN SEPERATE FUEL TAP THE NEEDLE CAN GET STUCK AND THEN WILE SITTING THE FUEL RUNS THRU THE CARBI STRAIGHT PAST PISTON INTO SUMP AND YOU GET FUEL OIL LIKE YA DID ..I THOUGHT YOU BOYS WOULD HAVE HAD PLENTY OF CASH BETWEEN 3 OF YOU TO PAY THE GUY TWO HUNG FOR IT ,,HE MAY HAVE BEEN REAL POOR AND TRYING TO PROVIDE A GOOD CHRISTMAS F9R HIS FAMILY ,,YOU GOT A REAL GOOD CONDITION CAET THAT RUNS DAM GOOD SO YOU SHOULD BANK HIM A FEW EXTRA DOLLARS !!! AND DONT BE SUCH STINGES JUST BEFORE CHRISTMAS ,,YA ALL COME FROM FAIRLY WEALTHY FAMILIES ARE YOU NOT !
I'm most happy when Ike & Charles do these videos duo style. There is no holding back, and just pure fun. Straight to the point, then a good thrashing.
I can already tell I like the video, sometimes simple builds are the way to go, I've missed them!
I still like these simple builds as well. So much more fun 😁👍
you can never go wrong getting an old dingo back out in the dirt!
It's a dingo Phoenix. The spring spindles the Phoenix head rest and the gold Rims. Mine came with a 5 hp b&s. This was my first go cart in 1997 98
I think a cheap kart challenge would be a sick and fun series. Each buy a Kart fix her up and do challenges
I had a Dingo back in 87-91 It was a great trail go-cart
I missed the simple builds! Some of the things you guys have been up to are out of my league. I love the dingo tomfoolery!
I have a manco Phoenix eagle and I love it. Wish it had better suspension. Only has weak springs in the front but it's been beat and no issues
i scored an 85 dingo, complete with perfect seat and original wheels and tires, for 50 bucks! got a predator for it, some tubes for the tires, a new torque converter (old one was missing a lot of parts) and im about to go nuts with it
I love the fure fun you guys can have with anything! Working towards some play time!
Some of my favorite memories were made on a Dingo. Mine was an 80's model.
I really enjoy watching Isaac and Charles working on things they work together so well, its like they read each other's minds.
Gotta love the little spanner starter handle there, nice little improvisation by the former owner... :D
Sidewinder was the still best Charles and Ike episode IMO, but this was awesome! What a great find.
i've been watching this channel for over an year i love these types of videos keep the good work up!
Can't beat cheap and cheeful. ...great to see you guys just having fun...
You need to do a series on this one. A lot of first time cart owners would get a lot out of it and the first rule of any endeavor is to spread it to grow the hobby.
This is giving me old school carsandcameras vibes and I love it!
Love the "Old School" reference...
Man wish I could find a deal like that here in Vegas . Every gokart on marketplace around here is $500 for a clapped out POS. Nice job 👍🏾
A Kilowatt and Explorer are two of Murrays best gokart frames in my opinion.
I would highly suggest welding a third bearing hangar to the engine plate underneath the flywheel side to keep the axle from bending in the center. Dingo's like to bounce a lot in the rear
I was about to say as well that the kilowatts and explorers are another excellent choices for cheap go karts.
Finally some more Go Kart content 😊... and I bet that pull Handle is 10mm )ol
Making this video increased the value of dingos!! Love to watch the content can't wait to find one for my kids to have fun in!
This Old Man from Washington NC sitting back enjoying on my 70 TV❤️. Love You Guys 🛵🧔💝💝💝
Love the “Old School” reference by Charles. Restrictor plates off the red dragon. I laughed so hard.
The Baja is far superior to the Manco Dingo (despite being identical) because it says Phoenix on it.
I knew this was a smokin' deal when Charles did the "tilt and drop test" at 4:45 and the floor didn't fall out or cover the ground in a carpet of rust.
Basically you got an entire go-kart for the price of a ... um ... torque converter?
P.S. Thanks for the great reminder WHEN PURCHASING A VEHICLE...$5's, $10's, and $20's evenly distributed in at least three pockets. Ike knows this, he just wanted to teach us a lesson we wouldn't soon forget.
An excellent episode this week gentlemen. Thank you for educating us viewers out here and the nice variety you do each week is always a bunch of fun to learn from. The many projects you film are very entertaining. Cars & Cameras is awesome! Happy Holidays gentlemen; please be safe and keep creating the great episodes you are experts in doing.
I recently purchased a good quality used 4x4 quad from FB marketplace. I have been watching many of your videos for the past year or so, and you've inspired me at 52 y.o. to take up riding quads again! Thank you from a guy who rode them in the 1980s and rediscovered a fun hobby! I enjoy your content and can't wait to see the dragster and drag minibike crack 100mph!
I just got the Christmas ornament a few days ago. Thank you
This would cost $1000 in Canada! You guys always get the best deals!
I can buy those all day long for $150 here in Hermitage Pennsylvania USA
I don't know why you folks in Canada put up with the ridiculous prices.
Yup easily $1000 or more in Alberta. I guess having 1/10 the population means alot less stuff to choose from hence the insane prices.
Excellent video Isaac :) , Charles :) also nice find on a Dinko go kart price and parts upgrade too ! Super Job you guys did on this one and have loads fun to! Flush tank with Vinegar and Water together do thru petcock plus hose to it help lots !
Hi, my name is James DeGood. I'm a Freshman studying to be a Mechanical Engineer at Kettering University. Over the past two years, I've built an offroad go-kart with all-around suspension. This started after I watched your guy's video of the Manco Dingo ripping at Busco Beach. So I decided to pick one up myself and start my own project. I've watched your guy's channel for a long time, watching crazy builds coming to life, and I wanted to make my creation. You guys have much more knowledge and expertise regarding anything go-kart related, and I'd like to know if you guys have some advice to improve on my build. The kart has 24-inch tires in the rear and 21s in the front. It weighs anywhere from 250-350 lbs. It has the front half of a tao tao quad, and the frame started as a Manco dingo. It is powered by a 1986 Honda 200sx quad motor with a 5-speed transmission with no clutch. Some things have changed since these pictures have been taken. This includes putting rear suspension in place of the rear bars and upgrading from a mechanical disk brake to a hydraulic disk brake with a 10-inch rotor. The steering has also been changed from a butterfly setup to a full steering wheel with a rack and pinion. Any and all advice would be extremely appreciated as I know you guys are very busy. Thank you guys for being awesome.
Sounds like a pretty good build.Happy Trails.
There's no way I'm reading all that
You know that when the top comment has the read more you gonna have a whole ass book lol
Some people are mentally lazy and will miss a lot of good stuff in life because of it ...
James , it sounds like you have a pretty good jump on your build as it is and I am building/rebuilding two different carts at the moment - one is a 05 tomberline crossfire150 that I'm keeping all stock and just piecing back together a little at a time and finally just got to ride it for the first time day before yesterday while the other one is an Kazuma mud buggy with 440r two stroke off an Arctic cat snowmobile which is in about as bad of condition as it could be without just scraping it 😂 ... It's going to be a long time before I can ride it and it's all about just taking your time and doing a little bit of work here and there when you can and do not give up but stay on it and eventually it will be finished and you can enjoy the fruit of your labor so the advice I have for you is don't watch these channels and think your going to do the same work in the same amount of time because if your not able to then you'll get discouraged and give up , been there and done that , but instead just take your time and keep adding to it as you go ... be safe brother and keep working at it ...
Yo what can I get under 200
Man you can never go wrong with a dingo 👍
I need a diagram of the grand prix track and and I gotta know how you guys gets so many angles with like two cameras lol
I want to start go karting so you only need a helmet or do you need neck braces and rib protectors etc
Just traded two cast iron pans for a running kart with a cut up cage on it with a 11 hp Briggs and new torque converter set up that had a stopped up carb I have another cage for it
I bought a late model dingo half cage for 350 had some jank work on it and a toasted engine. It's just about rebuilt.
I actually forgot that I ordered a spark plug ornament, and when It came, I was surprised I got lucky number 3! :3
This is my favourite UA-cam channel it’s like the man cave go to 😂
After you add the three parts you mentioned, you'll more than double your investment in this machine... LOL! Great one!
I got my 4 wheeler from Facebook marketplace. It needed a new shifter rod but other than that it was in good shape
So excited for the next episode love the marketplace finds love this video can’t wait
Love the old school movie line haha
i have a yerf dog go kart ill be working on it in the spring , i made my own roll cage
Some motor oil will seal up cracks and air leaks in tires
It’d be cool to see you guys bring back the 4 engine kart and do a lap for old times sake.
Ike should drop in a built/bulletproof 6.5 IDI turbo in that burban!
Not too many go karts for sale out here in the midwest/great plains for cheap. But I do keep any eye out for them
Lots of fun!
Kudos to Ike for not choking Charles for constantly talking over him.
I have the same Dingo but with electric start & lights. All the wiring was disconnected when I got it and I can't find a reliable diagram😢
Perfect length video
I have "I'm interested. When can I come take a look at it?" saved as my auto greeting. So much better than us this available.
Ike "Did it suprise you ? " Charles "Yeah"
We always put the sleds on the stand on first start every season.
Man in May i bought a manco 285 (like a Dingo but it has a seat for 2 kids, just a slightly wider one) for $300 with the engine, got new tires and paint and a smaller sprocket, just didn't calculate the fact i live in the suburbs and we have absolutely ZERO dirt! A real shame but im moving out soon hopefully to a place with a big yard!
If you want anything for your dingo give power sports a Ringo! Missed an ad op there Ike! 😊👍
Lol. Good one
had the same kart in yellow and had a quad as well never will I own something without suspension again kept the quad little 88 yamaha moto 4 350 great machines
it would be nice to see this gokart restoed to how it looked new with a few tune up patys and call it the baja 200 +
Really enjoy the content
Grow'n up men playing around with motor toys, .....-I love you guys!
I'd love to see a 420 and higher gearing on it. Great find.
I'd love to see yall hop this thing up on another $200 budget and run another hot lap 🚗 📷
Hey, is Chuck doing a Camaro hot rod build? That would be fun. 😎
Have you ever thought about using motor mounts for a FWD car along with swingarms to soften the ride? They are heavy duty and are much cheaper than using shocks.
They have done an all wheel drive one which was literally 4 212 engines mounted above the wheels on stands, it's really goofy but so fast. Apparently FWD on go karts gets bad with shooting off in one direction but I'd love to see it attempted
I'm going to buy my first kart tomorrow, a single seater no rail bike bar 212 briggs, just needs front tires. $250 good deal
Good job guys what year was the go kart
Whats the story with the 3rd gen camaro... ive seen it in the background a few times... super interested in whats going on with it... id love to see you guys build that 3rd gen..
I bought it to do a video on my channel
Great find!!!! Will there be a post Mini Mayhem video about the new cart?
Great episode really get the most out of the Dingo.
Good little fixer upper.. John at the end looking like Thomas Rhett! 😂
Where's the lawn dart? We need to see that again!
You guys are great! Y'all should motor swap a yerfdog spiderbox 150cc engine with a 420cc predator.
Great Video! What's a good place to purchase replacement go kart wheels for a yerf dog?
Here in Texas mini bikes and Go karts are expensive
I can’t believe that you guys didn’t flush the gas tank 😂
I’m going to list my go cart in Asheville nc for $400. 6 hp torque converter and front and rear shocks
Y’all shopping in West By God Virginia? Sweet!
30 minutes will get you 15 miles in Harris county Texas if the traffic is light.
helps to use a cell phone to take a picture first and then take things apart pictures really help
"I don't know where that wasp came from."
Hell, Chuck. It came from Hell.
I had that same minnie bike. Did that one have a flat piece of steel for a brake pad? Things have come a long way since then. I also had a Bunelly 50 trail bike, I don't think I spelled Bunelly right, that way in the early 70's, but I do remember that smell of that new trail bike, there's nothing like it.
U guys should collect dingos and setup races all with stock or equal parts setups for even when guesys to c&c compound cant bring there own
hey guys I just bought my first go kart and whenever I turn right the engine shuts off not sure what to do its a Honda gx340
Most likely it is the low oil shut off sensor, going around the corner makes the oil low and cuts out the spark causing it to shut off.
@@DANFIXINIT ok so adding more oil will fix it?
Low oil cutoff switch needs to be disconnected. But remember to check your oil often
replaced a carb filter on a 10 horse briggs concrete mixer. had nothing so I used an old winter beanie, and a folded leather glove I didn't need to keep the polyester from burning.
Good work 👍! It's 😃!
I'm jealous of your local classifieds! Where I'm at a rusted, clapped out non running kart will still be listed for 500(FIRM) my locals are delusional
I wonder what great thing you 3 will produce that will leave a legacy.
I am intrigued by the old camaro
I had a brand new Manco Dingo as a kid! We got it on a snowy Christmas and drove the crap out of it. Looks just like yours
I think ya got the deal of lifetime starts 1st pull prob run forever in its stock form great find speaking of find who's old 90s z-Camaro that's my dream build love that body style iconic 350 iroc z🏁❤
Its mine
I get in trouble on marketplace, bought my 150cc gy6 4 seater off their for 300 needed a battery ran amazing
Dingo with the two smoke out of the wheeled snowmobile?
Petition to cr500 swap the dingo.
Poor Ike's legs are so long, he can't keep his knees inside the roll cage! Chuckles is more "fun sized" so he can get a good racer's tuck!
Way to go Charles!
Ive got a red dingo in my driveway right this very minute!!!
Guys this is a good chance to see how much difference a belt and chain can make before you then put on the juggernaut.
Great video guys I wish I still had a spine that was able to take the abuse
I you ready sir 😂😂😂
3rd gen Camaro chuck must have just got her out of impound