Це відео не доступне.
Перепрошуємо.

Headliner Replacement (Honda Accord 03-07)

Поділитися
Вставка
  • Опубліковано 18 сер 2024

КОМЕНТАРІ • 85

  • @RonsRides7601
    @RonsRides7601  6 років тому +33

    Don’t know why, but at some point while uploading my audio doesn’t match up with my video. Sorry about that guys.

    • @karinarubio7607
      @karinarubio7607 3 роки тому +3

      The fact that 2 years ago you said i don’t normally wear face masks and now it’s a mandatory thing to do😓

  • @rohangangar6210
    @rohangangar6210 5 років тому +61

    A few tips:
    1. Make sure to glue and smoothen properly, do not, I repeat do not put the fabric on the glue in one instance. Go slow and make sure you do not have any folds or wrinkles. I have a wrinkle and it ruins the whole look. Trust me, be careful as that glue will not give you any room to remove and re-install.
    2. The B pillars, between two doors, are easy to move if ya need, just pull the two panels back to form a triangle. They will unhinge and the top grey one will fall, later when reinstalling form a triangle and just put them from the vertex straight back in (make sure hinges are aligned).
    3. The lights will not turn on when the screws are taken off so.. don't worry!
    4. Make sure you clean the old headliner COMPLETELY! It is really dirty, I found a rag and your bare hands can work (for mine at least)
    5. The headliner is made of foam so be careful when getting it out of the car, also there will be wires connected with tape at the top un-tape it and you can always re-tape later (the wires are for the lights)
    6. When cutting holes for handles and stuff make sure you make the holes big enough almost as big as the whole since you need to get the screws and bolts through.
    Leave a like if this helps!

    • @bonscotty67
      @bonscotty67 Рік тому

      The headliner is made of a fiberglass plexi. I used a pressure washer to blow off the foam. Took about 5 minutes and got every particle off. Dried in the sun in about half an hour

    • @2008Prashantha
      @2008Prashantha 22 дні тому

      @@bonscotty67 is headliner sticked to the roof by any means ( i mean the fiberglass plexi panel to which we stick the fabric?) Also will there be any chace of air bags opening if we remove the A or B or C pillar covers?

  • @bonscotty67
    @bonscotty67 Рік тому +4

    I used my pressure washer to spray off that old foam. Worked great! Took every particle off and only took about 5 or 6 minutes, tops. ☺️
    Great video!

  • @Echo-o-o
    @Echo-o-o Рік тому +3

    Impressive work! Can you report, 4 years later now, how it's holding up? Thanks.

  • @gabrielmagallanes1099
    @gabrielmagallanes1099 5 років тому +17

    The best way to remove the sunroof headliner is to remove the sunroof it self using a Philips screwdriver and a T-25 screwdriver then it pops out from the top

    • @m.ibarra3427
      @m.ibarra3427 3 роки тому +1

      I just can’t find a video doing that. Nobody change that area.

    • @DriqBlaq
      @DriqBlaq 3 роки тому

      @@m.ibarra3427 it’s the same process as my Acura because they the same type of car
      acurazine.com/forums/third-generation-tl-2004-2008-93/diy-2004-2008-sunshade-moon-roof-cover-sun-roof-cover-removal-glass-replacement-894376/

  • @SooperToober
    @SooperToober 10 місяців тому

    Impressive- very very impressive

  • @twosencefromcleveland6084
    @twosencefromcleveland6084 5 років тому +1

    Looked like it just fell out of the car: easy as pie. And, it jumped back in too! WOW.

    • @RonsRides7601
      @RonsRides7601  5 років тому +2

      Yea I had no issue at all it literally just comes right out of the driver door

  • @bonkoo5953
    @bonkoo5953 2 роки тому

    very cool. thank you for teaching video. great job Bro..

  • @eddiejones5103
    @eddiejones5103 4 роки тому +1

    Very helpful saved me some money lol 👍

  • @SuperMan-xy8ui
    @SuperMan-xy8ui 4 роки тому +3

    Just buy 1/8" foam-backed fabric headliner off Amazon and use a high-temperature spray glue adhesive like Polymat 797.

  • @MikeDraws
    @MikeDraws 6 років тому +1

    I made the mistake of doing a section at a time on mine and the nozzle on my can glued itself shut so I had to go buy a new can lol yours definitely came out way better than mine did

    • @RonsRides7601
      @RonsRides7601  6 років тому +1

      That’s funny cause I was thinking of doing that first lol

  • @FenderBenz
    @FenderBenz 5 років тому +4

    This was a very nice video man. Very helpful!

  • @gabrielflorentino6080
    @gabrielflorentino6080 4 роки тому +7

    Do you guys know that this most happens with the ones with sunroof. I have a 2007 accord with no sunroof, and the headliner is more hard than a rock.

    • @trippinmangos5869
      @trippinmangos5869 3 роки тому

      Mines with no sunroof recently started coming apart

  • @samuelc.7153
    @samuelc.7153 Рік тому +1

    I like not normal too!

  • @krakedtv
    @krakedtv 6 років тому +1

    love the accord videos man keep em up

  • @kenni411
    @kenni411 4 роки тому +3

    How has it held up? need to do my 07 it has completely fallen......

  • @MrNightpwner
    @MrNightpwner 6 років тому +2

    Nice! Gotta do this too

    • @RonsRides7601
      @RonsRides7601  6 років тому +2

      There’s so many different routes to go with this man. Im still hyped about it lol

    • @MrNightpwner
      @MrNightpwner 5 років тому

      @@RonsRides7601 took it out a couple days ago. As shop quoted me 120. I'm just gonna keep going with it and spend the 60 dollars for the foam backed material.

  • @xgearheart8592
    @xgearheart8592 Рік тому +1

    Anyone have an instructional video on removing the sunroof sunscreen portion?

  • @josevazquez4125
    @josevazquez4125 5 років тому +2

    Too bad I got a sedan, its a bit harder to remove the headliner. But overall I like how it came out lots of 👍👍👍👍 on the job.

    • @RonsRides7601
      @RonsRides7601  5 років тому +1

      Yea and I thought having a Coupe would make it more difficult but I’ve heard otherwise. And thanks man I appreciate it 💪🏽💪🏽

  • @vermasean
    @vermasean 2 роки тому

    Nice work! Obligatory Liked and Sub’d! 👍▶️🔧

  • @neilsitto2470
    @neilsitto2470 6 років тому +3

    Looks good man. 👌 keep posting more videos bro

    • @RonsRides7601
      @RonsRides7601  6 років тому +1

      Thanks man, I appreciate it 💪🏽

  • @waynesessions1307
    @waynesessions1307 Рік тому

    Your video help a lot thank you. How many hours it took you to do?

  • @omartorres5626
    @omartorres5626 2 роки тому

    2:55 the funniest part 🤣🤣🤣

  • @NoorSharif24
    @NoorSharif24 5 років тому +2

    Did you have any concerns about setting off any of the airbags??

    • @RonsRides7601
      @RonsRides7601  5 років тому

      No not really I wasn’t messing around with any wires or any of the sensors for them

  • @see-jaytv7653
    @see-jaytv7653 4 роки тому +2

    Damn I wish you lived in Hawaii, I have the same car as you & I would definitely pay you to do this to my car.

    • @RonsRides7601
      @RonsRides7601  4 роки тому +1

      Thanks!! It was really easy and extremely satisfying, I’m sure you’d have no problem tackling this.

  • @robbiewilson157
    @robbiewilson157 4 роки тому +1

    do you have a link to the material you bought?

  • @_bakez_
    @_bakez_ 5 років тому +1

    how did you get the headliner out of the car? did you go through the driver door?

    • @RonsRides7601
      @RonsRides7601  5 років тому +1

      Slid it right out of the driver door yessir

  • @awesome1232324
    @awesome1232324 3 роки тому +1

    2:57
    "Omg Ashley I can't fit this burger in my mouth"

  • @benhartson
    @benhartson 4 роки тому +2

    how’s this holding up after 2 years?

    • @RonsRides7601
      @RonsRides7601  4 роки тому

      I had the car for about a year after that and never had any issues. My roof started leaking at one point and the headliner was still not going anywhere.

  • @senseizamasu4143
    @senseizamasu4143 3 роки тому +2

    What Measurement you get for your headliner from Walmart

    • @RonsRides7601
      @RonsRides7601  3 роки тому +3

      You could just measure the roof on the outside. I got a 5x6 foot. And also the material I used stretched well. So if need be I could have made it go further.

    • @senseizamasu4143
      @senseizamasu4143 3 роки тому +1

      @@RonsRides7601 thank you so much that helped alot much appreciated

    • @RonsRides7601
      @RonsRides7601  3 роки тому

      No problem bro goodluck man!!!

  • @zealgaming9123
    @zealgaming9123 5 років тому +1

    Does it hotter in the car because of the black?

  • @dzachalski
    @dzachalski 2 роки тому

    What kind of adhesive did you use ????

  • @brandonazevedo4494
    @brandonazevedo4494 3 роки тому

    where did you pick up the fabric?

  • @ravenm.4396
    @ravenm.4396 4 роки тому +1

  • @jonathansimmons6452
    @jonathansimmons6452 4 роки тому

    Is this the same way for a 97 Accord?

  • @hernandezhernandez-sw4oq
    @hernandezhernandez-sw4oq 4 роки тому +1

    excuse me a question what size is the headliner

    • @RonsRides7601
      @RonsRides7601  4 роки тому +1

      I think I measured out 5X6 of fabric. That should be plenty.

    • @kendellsouthrnsweethrt5636
      @kendellsouthrnsweethrt5636 3 роки тому

      Thanks was about to ask same question because I have 03 accord and headliner is all hanging down so going to get it fixed

  • @kenni411
    @kenni411 4 роки тому +1

    Great video ! How long did it take from start to finish?

    • @RonsRides7601
      @RonsRides7601  4 роки тому +1

      Maybe around 2 hours in total

    • @kenni411
      @kenni411 4 роки тому

      Unorthodox Garage do you remember if the fabric had a different type of backing ? Did it come wrapped like a throw blanket or did you have to have it cut by the yard ? Was it a fleece type of material?

  • @senseizamasu4143
    @senseizamasu4143 3 роки тому

    How would i know what Measurement to get for my Honda Accord headliner

    • @GameFlife
      @GameFlife 3 роки тому +1

      Maybe u just need to buy a big sheet and cut them out do width over length of the car maybe?

  • @jeremylakenes6859
    @jeremylakenes6859 5 років тому

    Why didn’t you remove the seatbelts and then pop out the pillar plastic?

    • @RonsRides7601
      @RonsRides7601  5 років тому

      Jeremy Lakenes I didn’t have to remove those to get the headliner out. I like how the gray and black looks.

  • @dandandan785
    @dandandan785 5 років тому

    How do you take off the b and c columns

    • @EdfromVirginia757
      @EdfromVirginia757 5 років тому +1

      dan brown For a sedan you have to take the front and back columns off, and the sunroof then kinda pry the side columns back and gently remove the headliner back.

  • @kiyabowman3237
    @kiyabowman3237 3 роки тому +1

    ITS CALLED VELVET😂

  • @zealgaming9123
    @zealgaming9123 5 років тому +1

    How did you get the headliner back in the car? Just shove it in there?😂

    • @RonsRides7601
      @RonsRides7601  5 років тому +2

      Yea it goes in pretty easy man. I had no issues at all.

    • @zealgaming9123
      @zealgaming9123 5 років тому +1

      Unorthodox Garage appreciate your responses man, I guess my car is slightly smaller. I had to sway in downward through the steering wheel and push it in. I finished it earlier today.

    • @RonsRides7601
      @RonsRides7601  5 років тому +1

      Np man. Glad it worked out for you.

  • @turbocat6258
    @turbocat6258 3 роки тому

    OMG he sprays glue inside his apartment on the carpet, this guy is a nightmare tenant.

  • @zealgaming9123
    @zealgaming9123 5 років тому

    Mine has the wires taped to the headliner.

    • @RonsRides7601
      @RonsRides7601  5 років тому

      Which wires?

    • @zealgaming9123
      @zealgaming9123 5 років тому

      I have an 08 accord so all I had to do is take the tape off.

  • @Cowboy1Brian
    @Cowboy1Brian 5 років тому +1

    Why in the hell would you NOT do the sunroof? 💩💩

    • @RonsRides7601
      @RonsRides7601  5 років тому +6

      Cause this car is MINE. And that’s what I WANTED to do. 😊😊

    • @Cowboy1Brian
      @Cowboy1Brian 5 років тому +2

      @@RonsRides7601 great answer, my man! You did a good job tho

    • @lanitaykelley8838
      @lanitaykelley8838 3 роки тому +1

      @@RonsRides7601
      My sentiments, xactly!

  • @turbocat6258
    @turbocat6258 3 роки тому

    It looks like a little child replaced the liner, a total mismatch. This guy is not a real thinker.

  • @dzachalski
    @dzachalski 2 роки тому

    What kind of adhesive did you use ????