WHAT?!?! DUDE!! THANK YOU SO MUCH FOR PUTTING ME IN YOUR VID!! I'm super humbled by this... I cant even begin to thank you man!! I still look up to you and for this to happen has me super juiced!!!
So glad I came upon your channel in 2017! I owe you a many a thanks on what is just the beginning of my 3d printing venture! Thank you good sir and Happy New Year!
Thanks! All depends on the lens I will shoot with. I got a new lens that does more of that blurred background effect. Will more than likely swap between them depending on the videos I'm shooting. Thats for checking out the video and leaving a comment!
If you use a large piece of CF wrap and start from the side as it is a large 'flatish' surface You should have a much easier time wrapping the mask Heat it up in any problem areas And cut down the middle The only issue with using the wrap will be that it will looked stretched and kinda warped as you need to stretch it quite a bit to get around the front of the face
Is that pickle Rick in your pocket or are you just happy to see me? Haha. I'm not only back to making videos but also back to watching them. Great stuff man. I enjoyed the hell out watching you make so many of these props.
Hey Bro your shelving looks fantastic! ALL AMAZING PROPS! Keep up the great work bro, everytime i see your vids I get amped up, keep up the great work. your vid making skills are on POINT! You know this already, im a big fan, youre a cool bud bro. HAPPY NEW YEAR!!!
Love your videos 😁 just getting into all the 3d printing stuff been alot of fun so far 😋 and I keep trying to wrap my head around 3d modeling but it may be above my head 😅
Before I say this, let me preface this by saying- I really love the channel! Your production quality is quite high and you clearly put lots of work into your videos. However, I must critique and cringe at the fact of how hard you're trying to hold on to your childhood, with the haircut and pack man suit. This is NOT HATE, just an honest critique! I think it would be a much better vibe if you just wore as simple as a t shirt and jeans!
@@UncleJessy np lol just looking for a new project. I like most of your stuff. But how did you even see my comment like do you really have notifications for ever comment?
WHAT?!?! DUDE!! THANK YOU SO MUCH FOR PUTTING ME IN YOUR VID!! I'm super humbled by this... I cant even begin to thank you man!! I still look up to you and for this to happen has me super juiced!!!
Absolutely loved that armored wolvie claw file! Unfortunately the forearm fits great on my arm but not so good over a pac-man suit ;)
Oh man! Thank you for including my Yondu Fin! What?! I am humbled and honored. Thank you! Also - that suit man.. that suit is brilliant.
I have only printed one of the props you have shown but it was your number one. Looks like you are spot on.
So so many of those helmets out there. Its a beautiful file
So glad I came upon your channel in 2017! I owe you a many a thanks on what is just the beginning of my 3d printing venture! Thank you good sir and Happy New Year!
Thanks Jessy you are too kind! I'm loving your display wall. I need to find space for my stuff. Maybe need to build a similar structure.
the famous killonious!!! dude, i'm a huge fan of your work!! great job man!!
Thanks. Your wolverine battle claws are sick!
haha thanks man! i'm just trying to keep up with you!!
Holy Cow! I wanna see you finish K's Blaster. The model detail is great.
Thanks man. Yeah def need to full paint that prop. Such an excellent file.
Thank you so much for including me in your awesome video man!!
I love your pink Floyd ring!
aaah i have to take a look at this one again.. have to tweak it a bit
two great designers talking together... this could be dangerous
Like the setup. I DID like the old one where the background wasn't blurred. Bu tthat's just me and I TOTALLY love the new wall.
Thanks! All depends on the lens I will shoot with. I got a new lens that does more of that blurred background effect. Will more than likely swap between them depending on the videos I'm shooting. Thats for checking out the video and leaving a comment!
What lens did you pick up? Ive been using a Rokinon 24mm t1.2 cinema lens and it's SO SMOOTH. Love the declicked aperture on it.
nice suit! ;)
Haha I need more of them
Great suit :D
Much appreciated man!
If you use a large piece of CF wrap and start from the side as it is a large 'flatish' surface
You should have a much easier time wrapping the mask
Heat it up in any problem areas
And cut down the middle
The only issue with using the wrap will be that it will looked stretched and kinda warped as you need to stretch it quite a bit to get around the front of the face
Is that pickle Rick in your pocket or are you just happy to see me? Haha. I'm not only back to making videos but also back to watching them. Great stuff man. I enjoyed the hell out watching you make so many of these props.
Put a pickle in your pocket, save it for a rainy day.... Save it for a rainy day!
Hey Bro your shelving looks fantastic! ALL AMAZING PROPS! Keep up the great work bro, everytime i see your vids I get amped up, keep up the great work. your vid making skills are on POINT! You know this already, im a big fan, youre a cool bud bro. HAPPY NEW YEAR!!!
Happy new year bro
That is the most nerdiest (if that's even a word) suit I've ever seen
PERFECT! I saw it and it was a must buy
Uncle Jessy send me one
Please
Love your videos 😁 just getting into all the 3d printing stuff been alot of fun so far 😋 and I keep trying to wrap my head around 3d modeling but it may be above my head 😅
"D V A figure along with her MEKA" -I'ts D. Va, as in diva lol
TheMeganano can you tell I don’t play overwatch hahaha Rainbow Six Siege baby!
HAPPY NEW YEARS!!🎉🎉🎈🎈🎊🎊🎊 awesome video i am a part of the notification squad😊
NOOOOICE! Happy New Years to you as well!
Did he really just call her DVA she isn’t trying to erase Loki she is diva
I love the new setup ❤️ im printing my first benchy
Hello dude, with which dimensions had you printed the statue of Tracer?
LOVE the jacket
Awesome video Uncle Jessy. Would you consider printing Juri's Voltron build? That would be amazing!!
Where did you get those shelves behind you?
Made them ;) a horribly made video should be out soon on how i put them together... lets just say they arnt perfectly straight haha
Uncle Jessy They look sweet and gave me an idea for my living room. Can't wait for the video to see how you did it
Have you looked into hydrodipping the mask for the carbon fiber look?
Suiting up done right!
LEGEND.....ARY!
Should've added the magneto helmet since that's where you started
But Uncle Jessy where’s ur wingman replica u made?? That should be #1
2020 update?
(doing a binge of your videos now that I'm having success with 3d printing again)
Cool video...I did like your star lord mask print
I NEED THAT SUIT
Awesomeness..
Love the Pac Man Suit and Tie. Where Did you get it?
I actually downloaded the Death stroke mask one day before watching this video LOL
I like the Pac-Man suit 👌
LOVE the suit!
Where can I get a suit like that!?!?!?!?!
Ok love the video but I have to say ,”HOLY SHIT I love you’re shut soooo muck where did you get it!!!
For your carbon fiber woes on that #1 have you looked at Hydrographics.
Nice package man suit
Dude you need to do 2018 and 2019
Man I’m so wishing I did a 2018 and 2019
Uncle Jessy you still can !!!! At least do 2019 like a quick shoot un edited
Before I say this, let me preface this by saying- I really love the channel! Your production quality is quite high and you clearly put lots of work into your videos. However, I must critique and cringe at the fact of how hard you're trying to hold on to your childhood, with the haircut and pack man suit. This is NOT HATE, just an honest critique! I think it would be a much better vibe if you just wore as simple as a t shirt and jeans!
A+ Setup A++ Suit A+++ Channel
You should print thorin's sword from the hobbit(the goblin cleaver).
OMG that tux!!!! I need it!
*Iron man helmet cries in the corner*
Man that's a PAC man suit
If i ever see you outside of that suit again, im unsubbing
Haha dude... right?! I need some more of these crazy suits from Opposuits either that or I'm going to quit my job and go design suites for them.
try some Hemp/CBD lotion on the eczema bro.
Can you make a 3d printed sword and great video 👍👍👍😀😀😀😀
Make sure to checkout my Thor Ragnarok Sword builds! I have a Zelda sword I'm still working on as well
Hello
Hola!
2021 sux
Did he call D. Va D V A?
Finishing skilles you do NOT have...
Thanks Yoda
31 comment
Dislike for the suit and how you said D.V.A.
Thanks for checking out a 3 year old video, watching it, interacting by using the thumb up or down and commenting which UA-cam algorithm likes 🤘
@@UncleJessy np lol just looking for a new project. I like most of your stuff. But how did you even see my comment like do you really have notifications for ever comment?