Who Wants NERF BOLTERS now? 3D-Printed WARHAMMER 40K Bolt Rifle
Вставка
- Опубліковано 16 жов 2023
- Buy the BambuLab X1 here: shareasale.com/r.cfm?b=235472...
Grab the model files from this video here: cults3d.com/en/users/TameGrip...
Elegoo Cheap Fillament: shareasale.com/r.cfm?
Buy the Printing service for this model and get all the printed parts, nuts and bolts in one package - www.bigbear3d.net/product-pag...
Get this Bolter Printed and Painted, like the exact one shown at the end of the video by using Hobby Goblin Studios - www.hobbygoblinscreative.com/
Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:602...
(watch my video for full instructions • How to Print Perfect M... )
Join this channel to get access to perks:
/ @fauxhammer
Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/w...
3D Printer Cleaning Mat: geni.us/3DPrinterCleaningMat
This Video is part of our series looking for the Best 3D printer for Miniatures; www.fauxhammer.com/top-10/the...
Special thanks to the following Creators who provided models
Creature Caster - www.myminifactory.com/users/C...
Tenjin Bust - BlackForgeGames (Patreon Only) - / blackforgegames
Dredge Marines - Mezgike - mezgike.com/collections/the-d...
Wolverine - Drafnir Studios - cgtrader.sjv.io/3eJyqv
Artis Opus FauxHammer Essentials Set: store.artis-opus.com/products...
FauxHammer Facebook Group - / painthub
FauxHammer 3D Printing Group - / 3dprintedminiatures
FauxHammer Discord - / discord
Best Airbrush For Miniatures: www.fauxhammer.com/top-10/bes...
Beginner Airbrush: www.fauxhammer.com/featured/b...
Affiliate Links to support us.
Element Games - elementgames.co.uk/wargames-a...
Wayland Games - affiliates.waylandgames.co.uk...
Forbidden Planet: forbiddenplanet.com/catalog/?...
Amazon - www.amazon.co.uk/s?k=Warhamme...
Website: www.fauxhammer.com/
Facebook: / fauxhammerblog
Twitter: / fauxhammerblog
Instagram: / fauxhammerblog
Pinterest: www.pinterest.co.uk/fauxhammer/
Video Editing by VidPros: app.vidpros.io/r/J50Z26
00:00 - Intro - Розваги
Buy the BambuLab X1 here: shareasale.com/r.cfm?b=2354728&u=3060349&m=138211&urllink=&afftrack=
Grab the model files from this video here: cults3d.com/en/users/TameGrips/3d-models
Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:6023738
(watch my video for full instructions ua-cam.com/video/Gm0-z971tgY/v-deo.html)
Join this channel to get access to perks:
ua-cam.com/channels/_9Jsf3SP8aMJgn0xv5jHjA.htmljoin
Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/wargamer?ref=FauxHammer
3D Printer Cleaning Mat: geni.us/3DPrinterCleaningMat
This Video is part of our series looking for the Best 3D printer for Miniatures; www.fauxhammer.com/top-10/the-best-3d-printer-for-miniatures-models/
Special thanks to the following Creators who provided models
Creature Caster - www.myminifactory.com/users/Creature%20Caster
Tenjin Bust - BlackForgeGames (Patreon Only) - www.patreon.com/blackforgegames
Dredge Marines - Mezgike - mezgike.com/collections/the-dredge
Wolverine - Drafnir Studios - cgtrader.sjv.io/3eJyqv
Artis Opus FauxHammer Essentials Set: store.artis-opus.com/products/fauxhammer-mixed-brush-set-5-brush-deluxe
You used some decals/emblem (Skull and Wings). where can I get that at?
@@darrenshady1415 yeah im actualy looking for the same one he used and i cannot find it wich is wierd since tamergrips didnt have any symbols on his page. indent options for installing them and nothing in the folder
Honestly, there are so much different patterns and STCs of the Bolter/Bolt rifle even in the 40K universe that having one sightly differ from one another should be mandatory !
Absolutely this. "It should look exactly like the models" is a baffling take, one that's seen warhammer artwork take a significant downturn over the years.
To my knowledge, there's only like, 5 variants of boltgun that are actually named, and a few, the two I can think of off the top of my head being the Mars-pattern and shrapnel Bolter, of them are the exact same visually, however there's over two dozen Las-Guns, at least 7 named and at least 5 have canon looks.
@@jemman2906In-universe, there are thousands of different patterns and variants of lasguns and Bolters that exist throughout the Imperium.
Even some of the chaos space marines bolters would look good. I would love to see a havoc heavy bolter would look amazing.
Space Marines love customizing their Bolters even though they're standard issue like their armor.
Another benefit of leaving the grips in 'raw printed plastic' is that they will not show any colour loss from the wear and tear of simply being handled repeatedly.
This guy gets it!!!
Which, personally can be really cool for apocalyptic guns, which is why I paint in so many different colored layers, makes the wear realistic.
For this though not painting it was so smart
Iv'e printed the same things from the same guy - rubberized spray paint is amazing on the grips and mag releases.
Come on guys... We need to do this... This man gave us so many good and helpful reviews, who are we to stop this man from going through the pain of printing so many pieces of resin, putting everything together and painting it...
Ahhh, thanks, I know it’ll never happen. I’ll be lucky to get 20k views
@@FauxHammer some day... One day... You will... And you will be happy, and then you will have to print it 😋 Be careful what you wish for 🤣
@@xManzi Thanks but nah, I know how popular my channel is, and it's not 20k likes popular. The video will have more views tonight than in the next 6 months, and do far we have 300 likes. I'd need at least 140k views to get 20k likes. if i get 50k views, this will be one of my best ever videos.
One step closer to making a real bolter.
Great job! This was a fantastic video. I am very much hoping you get 20k likes
The Emperor approves- this looks just a _tad_ better than the lightly modified and painted Nerf blasters I use for making Bolters, nice job!
Thanks
You printed out the underwater themed “Depth Guard” at :51!!! I printed out the entire combat patrol for about $7 after buying the files. Such cool models!
mezgikes files are awesome
Ooooo, seeing some painted stuff on your channel is exciting! I'm literally in the midst of painting some FDM printed props for my Halloween costume so I couldn't have asked for a better video today.
Go for it! I still have my Batman costume to paint
Great to see some new 3D printing content on the channel. I understand reviews are probably your bread and butter. I joined the channel when researching to buy a 3D printer but now I have one the reviews don't really apply to me so its great to see what you can do with them.
Thanks, I always was a hobby channel, but I’ve had so many printers to review it’s been choking me.
Now I have some space I can get some hobby back in
I've been using Elegoo's PLA filament. It's really cheap and looks fine. I can't speak for it's layer adhesion or strength, but I tend to print a lot of decorations and they are all serviceable.
Never expected to see this anytime in my life... a boltgun made on the shown expert level expertise!!! My greatest respect to you! :)
Well done - it looks awesome. I think you made some great choices!
I love how you're on a single direction train: "I want to do this, but I need to get it done fast enough that I don't quit it"
You're sabotaging your self-sabotage :D
Time to go the next step and get all those pieces cast in aluminum, tap some threads, paint + assemble, and have yourself a Bolter that will really shine.
I have an army of necron warriors that have been sitting in green cleaner for like 8 or so years now. It has become less procrastination and more science now.
Hah hah, I’m terrified what may come out if there
Paint it in the style of the world eaters!
That is an amazing model. Holy cow. The one I am making is more true to the mini but that was per the request for my local hobby store. If your interested I only posted one pic of it just about finished on instagram. I don't play warhammer, but man I love the weapons.
just seen, that's massive!!!! I like it!
I would love to see that but I can’t find your insta
@@lionpridedivisionyt1388 instagram.com/3dprintnbots/?hl=cs
Ooh! A squirrel!
As a veteran, and fan, the only gripe I have really had (outside of some parts of reality and a lack of placement for the gas back systems) is the way the fore pump action grip size and placement means you would have to pump out instead of in. Still doable especially if the grip had a place to move even if it was shorter than the full traversal. But seems more messy and prone to failure in certain situations as is. Still very nice and rocket ammunition takes care of an interesting bit.
To be fair, bolsters do jam
Bolters aren’t pump action. That’s just a hand grip.
As for the gas problem, bolt rounds have two charges:
“As well as the rocket propellant, a small conventional charge is also utilised. This charge is strong enough to force the bolt out of the barrel at a significant muzzle velocity, and simultaneously ignite the bolt's propellant. The rocket-propellant is precisely fused to ignite immediately as the bolt leaves the barrel, alleviating any possibility of pressure build-up. The bolt then accelerates toward the target under its own power.”
doing somehting just bc it is fun or looks hella cool is more thn enough "story" or motivation than anyone has to justify. And I hope you are happy with the results of the video because it makes me wanna print a Lazgun designed by Tamegrips and also the bolter. Thanks for doing this video :)
There are so many different varieties of boltors in the lore that it really doesn't matter what creative choices you take its always gonna look like a boltor.
Yeah, but some look bad
@@FauxHammer we don't talk about the bullpup boltor, buddy
Man 3d printed dowels for assembly is damn smart,
Not bad ay
i saw a bit of distortion on the copper colored bullets that looked familiar, then saw we had the same printer at least for that item you printed and i just figured that same distortion out on my own p1s today. at smaller layer heights like .08 i got that exact same type of distorted surface pattern and after a ton of testing i figured out that lowering the speed to the 50% silent mode got rid of those surface anomalies. I am going to try a print slowing just the outer layers down to 100mms instead of the 200 it was set at to try and match the 50% number they show for silent mode so I can run it at normal speed for the inside and supports
How smooth is that coming off the x1c. Wooow
Cutting corners? isn't that just working smarter not harder? That is now on my list to print and paint.
fair point
No because cutting corners alteast to means skipping steps. Working smarter not hard is fine so long as it has the same quality in the end.
Thanks for sharing you various smoothing methods it's nice to have more than one option.
You are welcome!
I'm not a 40K fan, but I'm trying out Boltgun now, and I want this thing so much.
Love your profile logo, I have that as a tattoo
Stumbled on this video. Saw the glory of this printed bolter. Immediately purchased the STL. My X1C will be printing a couple of these. As obviously my brother needs one too. Now to decide which chapter to paint if for. Imperial Fist? Black Templar....
The chaos parts are in the set too!
Very VERY cool. Now you GOTTA make one thats actual space marine size
I can see this easily adapted for Airsoft. 40k Airsoft is literally the future!
Golf ball Airsoft sounds based af
@@Flesh_Wizard hahaha or pack those kinda egg capsules with bb's and use it as a grenade launcher 🤣
I’ve already asked Luke
People dressed as Orks or even Tyranids would be so awsome
I absolutely LOVE this! I would buy the plans and print 1 if it came in Phobos pattern.
Factor of cool is all we need. More. Passion. Projects
You should definitely paint that chaos bolter in Nightlords colors
You know, I saw it and I immediately though Nightlords
Amazing model. Amazing work. Looks glorious!
Thanks
For an even better result, add a combination of white, red and yellow led lights in the muzzle, a sound chip near the middle, and a battery in the handle. Connect to the trigger and put an off on button to preserve the battery (or to keep it silent when needed).
Thanks for the tips!
I love this. I've seen boltguns made by some of the best propmakers on the internet and they look boxy and cheap. The thing is the models have to tone down the detail to be pheasable. You need to add details when you scale up.
agreed, and it needs to be done well
IVE BEEN WAITING FOR THIS FOR YEARS
Gotta love this guys honesty... Great videos too
I appreciate that! Glad you like them
Bruh... I'm in love with this idea. And all of the convention footage you had was great. All I can say now is that I want one.
I love it! Great job on the print and thank you as always for another great vid!
Yay, thank you!
Almost half way there, looking forward to the 2m titan. 10 out of 10, it is f**kin' cool.
Shit!
STC machines are basically super advanced 3D printers, so the layer lines are canon
Leblasto on UA-cam made a 3D Printed Bolter that fires Nerf Darts & ejects Shells, all rubber band powered. It's brilliant.
Oh sweet! just seen it!
Those damn squirrels. Nice bolter tho!
Squirrels! Where?
This would be the sickest nerf gun ever ngl imagine firing full auto mega darts xD
Well done from one Chrome Squirrel to another!
lol,. thanks
Amazing! I can imagine the LARP community loving this
Now imagine it could fire rounds. Even if you could get a bb mechanism inside for air soft
bros shoulder is boutta get sent to the next universe over
Great job on the finish, looks great
Thank you
A life size bolted would be much larger.
The adhd but the being distracted by different things while trying to do one thing I can relate so hard with tho bro
Oh my God! I was born to see this! It's unbelievable
You got me with that squirrel.
When I'm done my gunsmithing and ballistic engineering degree, I'm making a real one as my passion project.
The Adeptus Mechanicus thanks you for the STC.
Lol, cheers
GET THIS MAN 20K LIKES!
I clicked the video expecting a fully functioning mega nerf blaster, but alas its not even a springer.
Nice work though, and that is a beautiful modal.
thanks!
You mean this is a life-sized Arbites grade bolter.
A Life-sized Space Marine Bolter is literally the size of a human torso.
I'm pretty sure somebody with the right tools, techniques and resources could probably print one of these out sand and file it down to where they would have the room to be able to make it fire, cycle and actually operate
I’d like to speak to that person
I wish i had the inclination to print a bolter or even a Thunderhawk, but i don't. Got stl's for both, but my little ender 3 pro wouldn't hack it.
Great vid dude and lovely bit of kit ❤
That's freaking awesome!!!
Thanks
Love it!!!! And I’m glad you shared this build.
Glad you like it
That's fantastic. The only thing I don't like is the bright silver finish. Great stuff.
I don’t like it either, not what I wanted. But that’s what you get for trusting cheap amazon sprays
I'm disappointed that there wasn't at least one Death Company marine trying to kill that Horus cosplayer
Perhaps there was
High build primer from Halfords is great for getting rid of print lines on bigger stuff
Thanks, will try it
I use guitar wall mounts to hold props. Highly recommend them
Oooh!
Well, clearly, somebody needs to get this lad an Admech outfit. Artisan-Cybersmith Fictus Malleus.
GW already partnered with Hasbro (WotC) for the Warhammer Commander decks for magic the gathering. I could totally see them partnering again to make functional NERF bolters.
I mean hell, we already got a nerf Gjallarhorn from Destiny, so this isn't even that big of a leap for them.
Ikea has a pegboard (I think they call it skadis) that is perfect for displaying props/weapons
"I wouldn't print Warhammer miniature"
I don't have such weaknesses
This is bloody fantastic
My P1P just arrived today and this bolt gun is definitely on my to do list
you are goanna have so much fun with that printer
@@FauxHammer I already am, such a vast improvement over my old Ender 3
My armor is contempt
My shield is disgust
My sword is hatred
In the Emperor's name, let none survive
PURGE!!!
This is absolutely beautiful
I made a shell for a Dartzone Spectrum to turn it into a Plasma Gun... :D
Given GWs handling of life in general lo these past decades I think I'm just good on the franchise entirely now.
Well, I know what my new vorons first print is gonna be once I finish it... I even pre-bought the model. Wish it had the aquilla on there though...
Nerf and James Workshop should be paying attention here.
Yup
Very cool, nice work
A Nerf Bolter?!
The Emperor Provides!
Yep
There is a guy here on UA-cam who made a shell ejecting nerf gun that is similar in size to this, and it works, I would imagine it wouldn’t be hard to put its mechanism into this shell, since it’s practically perfect for it.
I’m hoping someone sees my video, gets these files and then does it
Would most definitely buy one of these ❤
They are awesome
Doing the Emperor's work right there, brother.
Thanks
I've heard that a good way to get rid of layer lines is by using a car body filler spray.
me delivering the emperors mercy to my cousins at the christmas party
The Emperor's greed "it's Nerf or nothing"
lol
Sweet sweet Emperor, I want one.
Build one
Waiting for a full size 3D printed Dreadnought now :D
Cool video
Hmmmm
You had me at NERF Bolter
It occurs to me, that the Bolt Rounds are the perfect target to print on a resin printer, using that "wax castable resin", to make Metal Boltrounds out of....
You could, but owww
@FauxHammer ve lry true, lol, I figure using them more as "hey, nice game" and handing your opponent one .... a little model work on them, and they could become business cards, with your name and such on them!
This is amazing! Would love to see a Lascannon too! and that Titan.
Maybe one day!
My Bolter and Chain sword are not functional, but look cool. FDM and they both look great. I have had people ask for them, but no none ever gets a high enough amount. On the subject of wall mounts, there is one on Thingiverse.
Этот чувак буквально напечатал на 3д принтере оружие, которое по лору вселенной может создаваться в течении десятилетий
Squirrel.... oh and those nice Wera spanners again! I love this Bolter and the painting looks spot on.
We’re are the absolute best
In deed@@FauxHammer
I could totally see this as a strife shell 🤔
What’s that?
@@FauxHammera nerf strife its a flywheel blaster, rip out its guts and and put them into this for a nerf bolter
For those that are quick, there is a Kickstarter about to finish for working Chainswords.
I wouldn't be surprised to see actually firing Bolters from the creator at a later date.
THIS ONE www.kickstarter.com/projects/alexgeekworkshop/chainmania-full-size-motorized-chainblade-with-sound-effect?ref=2stey5
I just Backed it, All Stretch Goals
With mega XL having the proper caliber is also perfectly possible
This is amazing. I actually modeled and made a bolt pistol that shoots nerf half darts if you are interested. It doesn’t look as cool as this one admittedly.
I’ll happily take a look!!!
It's huuuge, shows how small we are as regular humans
For real though, high build acrylic primer followed by your colour of choice is great, Halfords brand or Rustoleum for the priming and montana gold will give you those closest thing to wargaming paint variety for cheaper and with better wear qualities
Thanks for the tips!
DUDE THAT LOOKS BAD ASS
Thank you!
Nice work!
Thabks
Well the thing is. I am heavely autistic and i love warhammer just for the perfection that goes into the hobby sometimes