Love all the feet and tray organizers ever thought of making a cup holder to fit on the aluminum rails to hold like tumbler cups/yetis. If so that would be awesome and would definitely order a few for my set up
Nice Quick tip video Jake! I have a 10" Husky Electrician tool bag. Instead of shelling out more dough for the packout version, I'd like to be able to mount some of your 3D printed feet to the bottom panel. How do you suggest mounting? With a pop rivet? Thanks!
I have a job site radio and want to make it packout compatible but the way the radio is built the bottom is not complete flat and doesn’t line up either any suggestions??
Can you sand down high points or epoxy a flat piece of material to it? If it’s able to be disassembled you may be able to screw it to packout feet from the inside..
@@JakeOfALL Bummer... I attached my 7 1/4" miter saw on a board and hung it on the wall using my PACKOUT, I'm sure the plastic feet will work fine, but I would of liked the metal ones just to be sure... maybe I'll just make my own.
Scissors. Scissors are what you wanted to cut and trim that tape with. I realize it doesn't give off the false sense of masculinity you thin that knife does but they are the proper tool to do that job safely and easily.
You have solved my veto pro pac to milwaukee packout problem my hats off to you sir
Hell yeah !
Great video and great editing to speed through the tape and screw applications!
Thanks
Agreed. Near perfect editing. No wasted time.
Love all the cool things you’re doing with the packout!
Haha thanks
You should make a jig for mounting feet. You'd be able to mount the feet more exact on the mounting piece. No 2 sided tape needed either 👌
double side tape such a great idea thanks
Love all the feet and tray organizers ever thought of making a cup holder to fit on the aluminum rails to hold like tumbler cups/yetis. If so that would be awesome and would definitely order a few for my set up
Happy Thanksgiving to you and your family Jake. Packout rules
Thank you, and you to ! ... team Packout
Need something with a press release locking pin that will lock the after market box to Milwaukee pack out.
I was wondering this as well. The feet are all well and good but I don’t understand the use without being able to lock on
@@mattw2952 : Check out what they did on this Kaizen video for a table: kaizeninserts.com/products/kaizen-knex-platform-unassembled-or-assembled
Happy turkey day from your neighbour to the North. Rock out with your packout
Haha thanks !
Nice movie, good ideas, helpful solutions. Greetings from Poland.
Thanks !
Nice Quick tip video Jake! I have a 10" Husky Electrician tool bag. Instead of shelling out more dough for the packout version, I'd like to be able to mount some of your 3D printed feet to the bottom panel. How do you suggest mounting? With a pop rivet? Thanks!
Thanks! And I usually would say nuts and bolts,.and if thr bag is soft use some washers on the inside of the bag.
I'm adding feet to my 3 gal shop vac so I can stick it on my box when rolling into a renodle
Nice XMaxx! Happy Thanksgiving...
Thanks ! And same to you
I’m wanting to get a random box on the pack out and latch on how do we do that?
Hi What should I use to mount my stack to the floor of my van so it doesn’t tip over or move around
I noticed the Old Bay shirt Jake...are you from Baltimore?
An Old Bay shirt makes everything work better! 👍
i need to mount my dewalt chopsaw on top so i use it on top to transport you have any idea?
What kind of knife is that? Love it!
I just placed an order for the feet thanks!
Awesome!
@@JakeOfALL I hope I order the right ones !
Wow just wow! Thank you so much
Thank you so much Excellent video
How do you make it so it latches on to the thing below it
There are a few options we have . Msg us
Happy Thanksgiving!
Same to you!
Another good video 👏
Thanks again!
Anyone try putting these cleats on a Veto tool bag?
I have seen it, they put a layer of epoxy on the bottom, then screw the feet on it.
👏 i gotta get some of these!!! Is that a frenchie I see?
Yes you do.... and yes on Frenchie. his name is Duke
@@JakeOfALL love them! I have a female named Nyah, so is there a discount for a fellow frenchie lover? 🤣
How would I packout the m12 radio charger?
3dTechnoligiesusa has them
I was just wondering, Have you used any of those Feet (cnc and stealthmount) to the cleats? Can they work together?
Most do work together
I have a job site radio and want to make it packout compatible but the way the radio is built the bottom is not complete flat and doesn’t line up either any suggestions??
Can you sand down high points or epoxy a flat piece of material to it? If it’s able to be disassembled you may be able to screw it to packout feet from the inside..
Any idea for a packout cup?
store.jakeofall.com/milwaukeeproducts/miscpo/pofeetbrack
@@JakeOfALL you sir are a legend
Can we still order the 3D printed ones?
Awesome!!!
Cool!!!
What kind of drill are you using?
The m12 installation driver
Thank you sir
Bought it for my wife.
Can you post a link to the JRT CNC aluminum Packout feet without instagram ?
No sorry, he turned out to be a scammer
@@JakeOfALL Bummer... I attached my 7 1/4" miter saw on a board and hung it on the wall using my PACKOUT, I'm sure the plastic feet will work fine, but I would of liked the metal ones just to be sure... maybe I'll just make my own.
Can you send packout feet to France please
Thank you...
We !
Do you have idea about the price
I need 8
Nice ...
Thanks
What about mounting a chainsaw
you could put a packout foot on it !
🍻👍🏻⚡️⚡️💥
This is kind of ghetto honestly. You pay so much for your Packouts and you have to modify them in this way.
Scissors. Scissors are what you wanted to cut and trim that tape with. I realize it doesn't give off the false sense of masculinity you thin that knife does but they are the proper tool to do that job safely and easily.
Lol alright this is just taking it too far. Wasting time and money.
To each their own! Some people Would mount a car to a packout
uh yea uh yea uh over and uh this one no that one uh er