I think it is brilliant in that it handles tasks which normally would destroy a good soldering iron and so using a cheap one that is moded this way keeps your nice irone pristine.. Good job for sure!
glue gun cheaper than tips for my soldering iron. Knife is sharp enough to cut that syringe without heat. wire strippers don't have to be plugged in. you can seal a bag with a cigarette lighter. if you plan on replacing the components you removed in #1 you're better off with solder sucker or solder wick to clean up the thru holes as well.
glue gun is 100% not cheaper than tips. just spend a few bucks on a few feet of 6 gauge copper. you'll have tips for years. syringes are fairly durable plastic, the hot knife is better if you want clean cuts. some people can't strip wires for shit, and this is obviously for when you don't have strippers. not everyone has a cigarette lighter.
Some good tips👍, wondering if you used a piece of thick stainless wire threaded through a sausage would it cook it from inside out? handy if you don't have a frying pan lol
@@lordcaptain73 there is no such thing as a bad idea imo, some of the greatest inventions and discoveries have stemmed from what seemed to be horrible ideas at the time...and there is something I like to call CONSTRUCTIVE criticism....no need to tear someone down to make a point....maybe just help point them in the right direction.
at least you doing something sir i noticed most of the people think hard to make most bad comment on these kinda videos but i tell you true guys dosent look nice from me good try keep it up very useful if i think hard cheers
No 3. You have made it so easy to saw apart the Cooper electrode. You have to remind the viewer to be much carefully otherwise our fingers will be apart iso the electrode.
Easy way around all this: Hack 1. Learn to desolder correctly. Get solder wick or a desoldering pump. Both are pretty cheap and easy to use. Hack 2. Ever heard of wire strippers? Pretty cheap and useful tool made for this purpose. Hack 3. A small hack saw works wonders at cutting down your opioid syringe. Hack 4. Get a hot melt glue gun ya silly goof. They are cheap and made for this application. Plus you don't have to cut down hot melt glue sticks. Hack 5. Zip-lock bags do the same thing and are reusable. Plus they take A LOT less time to close. Instructions unclear. Replaced dick with soldering iron to heat things up in the bedroom.
The first 2 hacks get the component too hot if you are planning on reusing it. Melting plastic gives off toxic fumes that are very harmful to people and pets so if you are going to do this use adequate ventilation.
I like the desoldering idea. Too bad the led is melted beyond reuse. As for the other "hacks"... Most will RUIN your soldering tip and / or are pointless since a sharp knife, a small saw of a glue gun are cheaper and much better suited to the tasks.
can you please tell me the music that you put in video because it remember me wonderfull fantastic beautiful holiday in maldives.and i search for it many times and can find from who it is?? ..please !!!!!!
i know its dumb let say this *Well damn jimmy can you use your life hacks to fix the coffee maker *sure (pulls out a soder iron with a exacto knife on it)
Thank you so much for making this video! It is so helpful. I also figured it couldn't hurt to ask, is there any chance you might have any old tools or stuff for projects that you might be able to donate so that I can use them to make videos for my channel? I am disabled, homeless, and jobless. I'm trying my best just to survive and am living in an abandoned WWII bomb shelter. Any advice you have on how to build my channel would also be very appreciated. Thank you so much for your time. Sincerely, "Your homeless friend Kai"
Notice here you probably need a variable power supply - none of this plastic was smoking. The idea is to MELT it. If you're smoking it, you're too hot. Turn the power down. #1, handy if you use surface-mount devices, which are becoming more and more common. #2, handy if you're using very fine wire. #3, hot knife. Might be handy for plastic modelers who want to open car doors and trunk lids. #4, pretty useless to me. #5, might be handy for resealing those "accessory" bags when returning the wrong part back to the auto parts store. Or you could just tape it shut because they're probably going to return it to the manufacturer anyway.
i do not recommend following any of these "hacks".. its rather a collection of bad ideas.. 1:58 /copper rods are too thin and dont conduct enough heat to be usefull, so you made them very short, look how you damaged the desoldered part -> more bad ideas at once 2:51 /the paperclip doesnt conduct heat well because of material and its thin so it will work only for very thin wires even at such high temperature and most important thing is: this method produces toxic gases as you burn the isolation.. go buy a cable stripper.. 4:00 /dont destroy the knife and cut the thin tube without making anythig to smell burning 5:06 /a very bad idea, soldering iron is too hot for this purposse so you are beathing toxic gases again(and it holds worse than with glue gun) 6:15 /lol? look at the remnants of tin from soldering iron tip on your luxury bag and the holes lol.. with bare hands..try to use a side of fork heated above cooker, it works a lot better than this..
Speaking from experience, don’t do the hot glue one. The fumes will burn your eyes, nose and throat. It’s very painful. Also probably not great for your lungs.
I think it is brilliant in that it handles tasks which normally would destroy a good soldering iron and so using a cheap one that is moded this way keeps your nice irone pristine.. Good job for sure!
Thanks for the Idea, now i can make my own Styrofoam Hot Cutter.
So did you ever end up making the foam cutter? If so how did it turn out?
2:55 yeah there's something called a "wire stripper". Not sure if you've heard of it
glue gun cheaper than tips for my soldering iron. Knife is sharp enough to cut that syringe without heat. wire strippers don't have to be plugged in. you can seal a bag with a cigarette lighter. if you plan on replacing the components you removed in #1 you're better off with solder sucker or solder wick to clean up the thru holes as well.
"you can seal a bag with a cigarette lighter" yea that's how you pack the drugs xD
He meant if we only have soldering iron.
glue gun is 100% not cheaper than tips. just spend a few bucks on a few feet of 6 gauge copper. you'll have tips for years. syringes are fairly durable plastic, the hot knife is better if you want clean cuts. some people can't strip wires for shit, and this is obviously for when you don't have strippers. not everyone has a cigarette lighter.
I congratulate you on those ideas, they are very useful.
Cool Video !!
thank you verry much
For perfect cutting , I always use the hot knife , but now you made it easy for me to cut plastic bottle , thermopolic objects. Thanks man...
Hot knife! Fantastic idea
Thank you
Wow genius, aku selalu suka dengan cara hack soldering ini, ok gaes,, ✌
So for number 1, you're trying to tell me that I have to make each one of those custom sized for taking pieces off?
yes
Ok lol :D
Good way to burn out what your trying to recover tho!
If you were to make a few, it could speed up some reworks when trying to replace a few smd components at a time.
using two soldering irons with 223 flux much safer for components
Some good tips👍, wondering if you used a piece of thick stainless wire threaded through a sausage would it cook it from inside out? handy if you don't have a frying pan lol
4:01 there's a bug at the top right
I was looking for evidence this was being made in some roach infested hovel
i love he was about to touch it but then rememberede that it was a bad idea
I love your Brain and Your Creativity
Now I have a plastic rule welded onto all my plastic bags.
Resealable ziplock anyone???
Really nice, bro!
thank you
There is very cheap and reliable glue gun for no. 4. And it doesn't ruin tip of your soldering iron.
Sorry butt those "hacks" are crap.
Yes you are right instead to using soldering iron I may use a cloth iron and butter paper to join that two sticks using glue sticks
Hahahaha
Wdym 'butt'?
There just typical indians
Very creative I like it. Thank you for the tutorial👍
Some good ideas.
There is no need to be rude guys.
David Farmer I disagree, if you don’t make feedback blunt it won’t sink in that their ideas are stupid and they should feel bad
@@lordcaptain73 there is no such thing as a bad idea imo, some of the greatest inventions and discoveries have stemmed from what seemed to be horrible ideas at the time...and there is something I like to call CONSTRUCTIVE criticism....no need to tear someone down to make a point....maybe just help point them in the right direction.
Up next, best soldering iron hack to add grill marks to your steak.
Oh joy.
at least you doing something sir i noticed most of the people think hard to make most bad comment on these kinda videos but i tell you true guys dosent look nice from me good try keep it up very useful if i think hard cheers
nice video, good job
No 3. You have made it so easy to saw apart the Cooper electrode. You have to remind the viewer to be much carefully otherwise our fingers will be apart iso the electrode.
Easy way around all this:
Hack 1. Learn to desolder correctly. Get solder wick or a desoldering pump. Both are pretty cheap and easy to use.
Hack 2. Ever heard of wire strippers? Pretty cheap and useful tool made for this purpose.
Hack 3. A small hack saw works wonders at cutting down your opioid syringe.
Hack 4. Get a hot melt glue gun ya silly goof. They are cheap and made for this application. Plus you don't have to cut down hot melt glue sticks.
Hack 5. Zip-lock bags do the same thing and are reusable. Plus they take A LOT less time to close.
Instructions unclear. Replaced dick with soldering iron to heat things up in the bedroom.
Hot razor was the one I could put to use . Thanks
Nadie se dió cuenta que en el minuto 6:42 aparece una hormiga robot que le enviaron los rusos, para espiarlo y robarle sus inventos? 😁😁😁
Can we use this for beer bottle cutting?
is this the entry for the useless inventions challenge ? great job !
Very nice hacks. Thanks
It is better to remove the coating rubber of the copper wire！ Its a good idea!
1:46 he was about to touch it
40/5000
Congratulations on the ideas. I liked very much..
From where did you buy this iron machine
Does that not damage pads of pcb?
The wire stripper is one of the most useful ones
The hot blade made me tap the Like!
Good video except need to be watched at 2X
The first 2 hacks get the component too hot if you are planning on reusing it. Melting plastic gives off toxic fumes that are very harmful to people and pets so if you are going to do this use adequate ventilation.
Sorry but only the last one was the coolest 😎
And thats how you destroy electronic components.
Don't know why people don't like this, these are good ideas. I like the music too, what is it please?
These are gay ideas on how to ruin your soldering iron and also the music is trash
Great work , but the 1st and the 5th were just too too good
Good ❤❤
I will def be using the paperclip trick. Thanks!
You can just use an empty stapler.
What was the paper lip trick useful for ?
I’ll never get those wasted 6 minutes back. A total waste of time.
notice 4:03 top right
RACER STREET insect😂
RACER STREET yes
RACER STREET lol
RACER STREET 5:30 it is hell
were u looking for his fly partner in this video too XD
Hi Sir plz make a video on how to make solid iron machine at home
Cutter for foamboard?
I like the desoldering idea. Too bad the led is melted beyond reuse. As for the other "hacks"... Most will RUIN your soldering tip and / or are pointless since a sharp knife, a small saw of a glue gun are cheaper and much better suited to the tasks.
As usual, the real wisdom is in the comments.
can you please tell me the music that you put in video because it remember me wonderfull fantastic beautiful holiday in maldives.and i search for it many times and can find from who it is?? ..please !!!!!!
Great👍🏻👍🏻👍🏻👍🏻🌸
Now i have a top 5 list of what not to do with a soldering iron
Thank. Good idea.
Thank you NDA Hack you just wasted 6:41 minuets of my life
A head full of ideas, does not give rest to the hands. 🤓
Awesome ! Thanks for sharing !
Good idea
#2 why not just use wire stripper?
heat with plastic part. Fume intoxication . Don't forget to wear specific mask.
Nice.videos from.TANZANIA
Best idea
How are these hacks ? They're useless
i know its dumb let say this *Well damn jimmy can you use your life hacks to fix the coffee maker *sure (pulls out a soder iron with a exacto knife on it)
If you do not like then you can not watch
NDA Hack: if you can not watch, how you know if you like it or not?
jarno ronkainen ㄷㄴㅉ
Cara menyembuhkan cacar air
HEY MAN YOU ARE AWESOME
11 Nov 2017 - that's 1,063,081 times 6 min 41 secs that mankind will never get back.
プラスティックの物差しは溶けませんでしたか？
Thank you so much for making this video! It is so helpful.
I also figured it couldn't hurt to ask, is there any chance you might have any old tools or stuff for projects that you might be able to donate so that I can use them to make videos for my channel? I am disabled, homeless, and jobless. I'm trying my best just to survive and am living in an abandoned WWII bomb shelter. Any advice you have on how to build my channel would also be very appreciated.
Thank you so much for your time. Sincerely, "Your homeless friend Kai"
Yeah I call bullshit
Notice here you probably need a variable power supply - none of this plastic was smoking. The idea is to MELT it. If you're smoking it, you're too hot. Turn the power down.
#1, handy if you use surface-mount devices, which are becoming more and more common.
#2, handy if you're using very fine wire.
#3, hot knife. Might be handy for plastic modelers who want to open car doors and trunk lids.
#4, pretty useless to me.
#5, might be handy for resealing those "accessory" bags when returning the wrong part back to the auto parts store. Or you could just tape it shut because they're probably going to return it to the manufacturer anyway.
good idea with glue sticks thanks,,
Styrofoam cutter ?
great buddy.....
Dude why people dislike this!
thanks bro
I was searching for such time of video
thank you
4k tumbs up vs 2k , that explains a lot!!
Very good
i like.nice.kuta bali-indonesia
Nice!
6:03 la regla también es plástico, mejor una de madera.
I think the 3rd one was useful
i do not recommend following any of these "hacks".. its rather a collection of bad ideas..
1:58 /copper rods are too thin and dont conduct enough heat to be usefull, so you made them very short, look how you damaged the desoldered part -> more bad ideas at once
2:51 /the paperclip doesnt conduct heat well because of material and its thin so it will work only for very thin wires even at such high temperature and most important thing is: this method produces toxic gases as you burn the isolation.. go buy a cable stripper..
4:00 /dont destroy the knife and cut the thin tube without making anythig to smell burning
5:06 /a very bad idea, soldering iron is too hot for this purposse so you are beathing toxic gases again(and it holds worse than with glue gun)
6:15 /lol? look at the remnants of tin from soldering iron tip on your luxury bag and the holes lol.. with bare hands..try to use a side of fork heated above cooker, it works a lot better than this..
This is very helpful
no sirve don, lo unico que sirve es la hoja del olimpo a 1000°
garena logo
Speaking from experience, don’t do the hot glue one. The fumes will burn your eyes, nose and throat. It’s very painful. Also probably not great for your lungs.
moron
Going to try this to cut vinyl."would be great if it works.
Eres un genio vas derechito para la naza con toda esa saviduria
4:11 song??
at 3.28 he should have used 2 pliers to break the blade. Fingure could be injured in this way...
you wanted killar of electricity???
Mast hai yaar
tell the name of bagroung music
Excelent!
Life Hacks... AKA, how to use tools the wrong and possibly dangerous way.
wow the joining of 2 lolly sticks, that will come in Handy.
I like the second one
Thanks.Perfetto
Obrigado, muito bom.
How to spent 5 minutes of your life trying to desolder a capacitor
Good
Anyone saw that tiny bug on hack #3?
caranba esta de parabens ja fiz meu pirografo aqui valeu
Very nice
thank you
Wow that is so sad you have to congratulate yourself with another channel because no one else will
You are litereally using your other channdl to leave a positive comment because your video is so bad noone will leave a genuine one.
Dumbass