Hey these are all totally awesome! I will love making some of these with my son. He is 11 and has expressed interest in science and technology (um, heck yea! Im ambidextrous, so im always DIY-ing or fixing/making something)! I was curious about that last one....the toy wheels.....can you share exactly what you used there? What board was that from, was it the insides of the toy? I didnt see a antenna or RF.... He would love that one, and I could for sure get him to really enjoy thst one! I would greatly appreciate it! Love Love Love your videos.
@@nipunsah9887 that was small air pump or you can try with a 12 volt air fan used in computers for cooling but for that pipe should be long and input pipe to soldering iron in same manner.
Thought it was clickbait when I saw a motor glued to a soldering gun, then I got to 1:27 and was like OH...clever. Also I love the work you did with the Peltier junction. It would of made more sense to put potentiometers on the laser project though so you could of changed the speed.
This was the first time I watched these hack videos without fast forvarding. And first time I found many useable ones. The only was that you should use more fresh tin (and smaller soldering iron in that last one). Otherwise your solderings were quite nice
for the phone charger, you should short out the data lines on the usb cable. This will tell the phone that no, its not a laptop and it is allowed to draw much more current
Structurally the Peltier module is soldered with a solder with a melting point of about 125 degrees Celsius. From the candle, it quickly degrades and becomes unusable. The only way to avoid this restriction is to heat the water with a candle and the already heated water will heat the Peltier module no higher than the boiling point of 100 degrees Celsius.
I dunno bout how that soldering iron heats.. everyone ive ever owned was filled with heat cement and the heat came from a resistive short circuit held in place in the cement, when tge tip is screwed in it brings the heat to a tip and absorbs the heat because its a transmissive metal (tinned copper) and the metal housing the cement is stainless. No comprende that little heat gun.. i just use a cooking torch with a piece of stainless that stands in front of the flame deflecting it so the superheated air coming off if the deflection plate ambiently melts the solder...
it would be nice if you let us know what electronic gadgets you use especially for the phone charger
Good job.I like it
Man ur ......no words..!!.u done it perfect
Keep developing..
power bankke liye jo circit use kiye uska nam kya hai aur market me assani se mil jayega plzz reply
I usually don't like 'No talkies' but your stuff is interesting.
I like hot air gun and a mobile charging device you made that's so amazing bro wish you a best of luck next time.
Wow!!! very creative... One of best hacks i have seen in recently. Keep it up! 👍
These are great! Can you please tell me what motor/pump is called and where I can order one?
Take apart a keurig coffee maker and you have one for free if its in a dumpster.
1:30 what soldering iron do you use?)
candle powerbank, you are genius :-D
Hey these are all totally awesome! I will love making some of these with my son. He is 11 and has expressed interest in science and technology (um, heck yea! Im ambidextrous, so im always DIY-ing or fixing/making something)! I was curious about that last one....the toy wheels.....can you share exactly what you used there? What board was that from, was it the insides of the toy? I didnt see a antenna or RF.... He would love that one, and I could for sure get him to really enjoy thst one! I would greatly appreciate it! Love Love Love your videos.
good job 👍👍👍👍👍
Love your channel❤✌
Переделка паяльника в термическую станцию = весьма оригинальная идея!
Remaking a soldering iron into a thermal station = a very original idea!
не рабочий вариант.моторчик воздух всасывает в данном случае.не будет паять. ХРЕНЬ
она не работает. развод!!!! помпочка в другую сторону дует!!!!!!!!!
контакты местами поменять на двигателе ( + и - поменять местами)? ксати от чего эта помпа? аквариумная?
Семенов Максим замена + - не поможет
Вообще-то у помпы там два штушера .подцепить на другой или мозгов не хватает
Very very good .
You sir......are awesome.
What is the name of the controller at the end? The controller board that had the 2 wheels attached to it.
The touchless solder gun was really useful and a great idea! Great ingenuity but ultimately many of the things being made were not useful.
Some of the best I've seen. Thanks
А моторчик с тремя батарейками это зарядка для батареек (аккумуляторов)?И что их каждый раз приклеевать?
question : "are the diodes connected with the same polarity or in the oposite one , in parallel ??
Muito bom.Só complica fazer porque algumas idéias usam placas eletrônicas que ele não especifica.Aí atrapalha o bagúio.😃
To even play around with and think about what you can make with limited supplies is AWESOME! A great video.
Really unique and briliant life hacks LIKE!
good , nice , & cute
I'm impressed! Very interesting!!! Thx
great & creative video
Number 2 was so amazing trick, thanks man
Hey can you please tell me the name of the device he used to convert Iron soldier to hot gun
@@nipunsah9887 that was small air pump or you can try with a 12 volt air fan used in computers for cooling but for that pipe should be long and input pipe to soldering iron in same manner.
All item were best....iron ko jo smd machines banaya wo idea kamal ka laga....
Great videos keep it up
Cool ideas
What is the name of the instrumental song used on the laser light show part? Can anyone kindly tell me. Thank you.
I like the DC6.0V-3.2L Motor Pump, but do you guys ever wonder how somthing so compact works in such angle with the body of the motor?
Thought it was clickbait when I saw a motor glued to a soldering gun, then I got to 1:27 and was like OH...clever. Also I love the work you did with the Peltier junction.
It would of made more sense to put potentiometers on the laser project though so you could of changed the speed.
I really liked your smd soldering station, smart one
wooooooooow what a genius you are ,God bless you
Glue guns technology getting so popular...by 2020 it should spread all over the planet...i am intrigued
Good work. man
This was the first time I watched these hack videos without fast forvarding. And first time I found many useable ones. The only was that you should use more fresh tin (and smaller soldering iron in that last one). Otherwise your solderings were quite nice
How secure is the thing with cans and hot n cold
nice .. i liked the laser thing...
Fantastic. 😍
This is your idea, my problem is where I buy the engine. the rest is super good, thanks. Congratulations
does anyone know what the name for and where to buy the yellow things for the last one. the things that convert to electrical energy
Muito bom vídeo exelente
Ingenious, and it would be useful to be told in advance what was being made, to save time watching stuff that is of no interest.
Phil Chandler
Triple A battery in da face 😂
U'r totally right 👍
"to save time watching stuff that is of no interest" That'd be all of it then
Yes that would be great. We all don't have the same interests... thanks.
@@robertgregory3981 You could use the FF feature...
Save time? What are you the president -_-
Руки из плеч! Молодец!
wow amazing 😀😀
#2 is very cool! I might try that!
Very nice
for the phone charger, you should short out the data lines on the usb cable. This will tell the phone that no, its not a laptop and it is allowed to draw much more current
I am so going to try the hot air soldering iron!!!!!
very good 😘
wow nice idea i will make this
thank you
do you come from Vietnam?
Structurally the Peltier module is soldered with a solder with a melting point of about 125 degrees Celsius. From the candle, it quickly degrades and becomes unusable.
The only way to avoid this restriction is to heat the water with a candle and the already heated water will heat the Peltier module no higher than the boiling point of 100 degrees Celsius.
nice friend
Te puedo mandar mis ideas NDA HACK ?
Soy ingeniero en mecatronica y mecánico de helicópteros
What was that usb? energy harvester or?
What's your age and how can you do this
Invention
The video is fine and I have other good inventions
I like it !
JONNY HELP
"We Are Hell fire "found in CW within CW hidden few years ago this is Jr by the way
jacob gagne.
Caugré
JONNY HELLFIRE
Olarewaju
What are the names of the songs used??????
three life hack is best! i like it!
Maks [̲̅Y̲̅σ̲̅υ̲̅т̲̅υ̲̅b̲̅є̲̅r] Melodium. Yes
Phone box ar modde rakche oi glas ta ki glas....??
What is the name of that big black thing at 5:05 plz can anyone tell me
He visto mucho oero estos son diferente muy bueno👍♥️♥️
I dunno bout how that soldering iron heats.. everyone ive ever owned was filled with heat cement and the heat came from a resistive short circuit held in place in the cement, when tge tip is screwed in it brings the heat to a tip and absorbs the heat because its a transmissive metal (tinned copper) and the metal housing the cement is stainless. No comprende that little heat gun.. i just use a cooking torch with a piece of stainless that stands in front of the flame deflecting it so the superheated air coming off if the deflection plate ambiently melts the solder...
this is useful for me
2:50 min how is name of pump? I want to buy dat but i cant find up?
I like it video
13:50 it is better 4 batteries or 5 whith a little resistor
Whoa , your using your brain to actually do things . Whoa 😯
Exelente gracias
Wao amazing.
Superb...! Hot air smt blower is the best.
HELLO AMIGO PEUT ME DIRE C EST CAPA DE COMBIEN QU IL Y A SUR LE DERRIRE DU MOTOR MERCI
मोटर कहां पर मिलता है जल्दी से बताऐ
what motor it's it of the heat gun?
😊😊 bravissimo vai così in gamba
I too like it.very good.nicccccccc.
simple hacks but very practical
love how the "projector hack" sucked so bad he gave up and used his laptop lmaooo
hey les gahs j aime votre chaines way
good...but are you really listening to this music while making that stuff man?
This video raises more questions that it answers!!!
bro you rock!
The ads are better than the film's haks!
i dont understand this 1:26 why? u no have finger?
The classic russian style life hacks where everything is held in place with glue from a glue gun.
*Amazing* :)
wow the projection is TOO GOOD TO BE TRUE
thank you for NOT using clickbait
3:48 !!! fuck !!! very good idea ;) oh yeah thks a lot for this tip ^^ very well for desolder ICs :)
ur " hacks" are fucking cool, way better than these other life hack videos.
Can I use the background music
Nice& TKQ
AMAZING!!!!!
Hotair is the best. :)
Top