Is your Dewalt TSTAK Tool collection like this? Organise them in Shadow Foam!
Вставка
- Опубліковано 30 лип 2024
- Overrun with Tools? There must be a better way to organise them! Today, Jonathan tackles his ENORMOUS Dewalt TSTAK with a customer Shadow Foam Insert!
00:00 How Much Foam do we need for our Dewalt TSTAK?
00:29 The Worst Part of the Dewalt TSTAK
01:23 Why have Shadow Foam Inserts?
02:50 Cutting a Foam Insert for our Dewalt TSTAK
04:40 Peeling a Foam Insert for our Dewalt TSTAK
06:19 Why Buy Shadow Foam Inserts?
08:03 Share with us your Shadow Foam Projects
Is Your Tool Collection like this? Let us know in the comments section below!
SUBSCRIBE for more videos:
bit.ly/SFSUBSCRIBE
Watch our LATEST VIDEO:
bit.ly/SFVIDEO
Made possible with Shadow Foam, get yours here:
bit.ly/SHADOWFOAM
FOLLOW US ON
Facebook: / shadowfoam
Twitter: / shadowfoam
Instagram: / shadow_foam
UA-cam: / shadowfoam
Music:
Set Me Free by HVRDVR
Walking in the Forest by Evgeny Bardyuzha - Навчання та стиль
Have you looked at templates?,
You could have a series of templates with maximised layouts for certain brands and certain tools, the customer could lay the paper over the foam insert and just run your scalpel over the tool outline on the template, might even be able to follow the lines better.
Possibly be able to pin the template on the foam insert at the four corners for a more accurate, steady cut, or even semi stick for even better control of the paper on the foam, then you cut and peel off the excess around the tool outline leaving and easy to follow outline to pull out.
One for driver/drill with optional battery and bit slots etc, etc.
I'm sure a multi pack of templates would save a lot of time and head scratching.
If you don't have the actual tool in the way when your cutting your outline, you could create a scalpel holder that holds the blade vertically for even deeper and cleaner cut around tricky bends and right angles on the first cut, you could preset the depth on the holder and simply take the blade out of the holder to get the final required depth.
Possibly safer scalpel use for the guys notorious for being fat finger freddies.
I have an idea for a system that could be used thousands of times instead of just once.
I love the ideas from your company and would gladly help.
Sorry for the long post, the spigot of ideas got turned on.
Keep well.
i personally am very efficient with my 2 tstak small boxes, where I don't need foam cause there are so many tools they hold themselves in place
Which tools hold themselves in place? 🙂
Now that's a stack high
Stack em high, pack em in foam, that's the Shadow Foam motto!
Is there a shadow foam insert made to fit a Dewalt tstak 17803 deep drawer? I can’t find a foam insert to fit.
The regular DeWalt TSTAK Drawer inserts we made will fit your case
Sadly, once one pays for the shipping, I can buy two more TStak's.
Good idea, good luck.
Have you tried emailing my team at hello@shadowfoam.com for help with shipping?
5:59 Oy! Throwing the excess on the floor? Didn't your mum teach you any better?!
We swept up at the end don't worry, all goes in the recycling ♻️
@@ShadowFoam 🙂
Too expensive polifoam!
What is polifoam?