🎉🎉🎉 Congratulations! The winners for Hyperbolic Manta give away (Answer: the time when the BUG 3DP spec'd out at ~ 8:10) - @flyoncecrashtwice4256 -1 day ago - @Sajtospuding - 1 day ago - @girenloland - 23 hours ago Please send me your private contact information (through UA-cam, cults3d, FB or RCGroups if possible). I'll send your the coupon code to download from cults3d.
Very nice project and execution Geode!! Seems to fly a lot like my non-printed L-Bug, but must be way quicker to build... Your flying site is ideal too! Saw a few real bugs there, but the one at 8:08 seems to have stuck around the longest, at least to me.
Nice job. So you can give it a fairy hard discuss throw. I can see where the extra ballast in the c/f DLG works like a slingshot now. Time to start printing mine. Thanks for all the hard work you have out in designing her.
Beautiful plane and flying, a little more dihedral would improve the plane's performance a lot. Normally for a RE you would build around 20-24 degrees of dihedral, yours looks to be around 12.
I printing one at the moment using mostly LW PLA. Have you tried moving the CG back any as the glider looks like if it’s a fraction nose heavy with the pitching and wanting to fly fast?
I added “2 cents” nose weight on the field to get used to this little bug. Will start taking it out once I dial it in. Apparently, I have too much throw and over control… She does fly better than me … haha
@@geode_rc I will hopefully have mine built within a week. I will post some videos on my channel if you like and play around with the CG. Can I ask where you have the CG at the moment? Thanks 👍
Make sure you're using lowest temperature allowed for your covering film to activate the adhesive. Us "touch & go" to avoid heat build up on PLA. ..... Good reference here - 3dprintedrcplanes.com/how_to/
Congratulations! The winners for Hyperbolic Manta give away. Please send me your private contact information (through UA-cam, cults3d, FB or RCGroups if possible). I'll send your the coupon code to download from cults3d.
Congratulations! The winners for Hyperbolic Manta give away. Please send me your private contact information (through UA-cam, cults3d, FB or RCGroups if possible). I'll send your the coupon code to download from cults3d.
🎉🎉🎉 Congratulations! The winners for Hyperbolic Manta give away (Answer: the time when the BUG 3DP spec'd out at ~ 8:10)
- @flyoncecrashtwice4256 -1 day ago
- @Sajtospuding - 1 day ago
- @girenloland - 23 hours ago
Please send me your private contact information (through UA-cam, cults3d, FB or RCGroups if possible). I'll send your the coupon code to download from cults3d.
Very nice project and execution Geode!! Seems to fly a lot like my non-printed L-Bug, but must be way quicker to build... Your flying site is ideal too!
Saw a few real bugs there, but the one at 8:08 seems to have stuck around the longest, at least to me.
🎉🎉🎉
Looks awesome! Can't wait to get min finished and in the air!
Have fun!
Nice job. So you can give it a fairy hard discuss throw. I can see where the extra ballast in the c/f DLG works like a slingshot now. Time to start printing mine. Thanks for all the hard work you have out in designing her.
Right on
Looks and fly's so nice. Having a test field with a dedicated thermal generator is great.
It sure is!
Very nice! I will print your Manta soon.
Awesome! Thank you!
Beautiful plane and flying, a little more dihedral would improve the plane's performance a lot. Normally for a RE you would build around 20-24 degrees of dihedral, yours looks to be around 12.
L-bug has a low aspect ratio wing. After maiden, I think the original designer make an excellent choice ❤
Bug 3D first appears at 0:05 joined by others at 8:09. Going to attempt to build the Bug.
I printing one at the moment using mostly LW PLA. Have you tried moving the CG back any as the glider looks like if it’s a fraction nose heavy with the pitching and wanting to fly fast?
I added “2 cents” nose weight on the field to get used to this little bug. Will start taking it out once I dial it in. Apparently, I have too much throw and over control… She does fly better than me … haha
@@geode_rc I will hopefully have mine built within a week. I will post some videos on my channel if you like and play around with the CG. Can I ask where you have the CG at the moment? Thanks 👍
@@torquedude Mine is ~71mm from LE. Very conservative one. RCG forum average - 71mm ~ 75mm
@@geode_rc thanks for the info. I will let you know how I get on. Thanks again 👍👍
ดีครับ
Thanks for watching
Nice one man! Do you have any tips for covering over PLA? I did some tests on my own, but the plastic just warped like crazy when I did it.
Make sure you're using lowest temperature allowed for your covering film to activate the adhesive. Us "touch & go" to avoid heat build up on PLA. ..... Good reference here - 3dprintedrcplanes.com/how_to/
@@geode_rcThanks man! I’ll give it a try.
BUG!!!! 8:15 😊
🎉🎉🎉
Congratulations! The winners for Hyperbolic Manta give away.
Please send me your private contact information (through UA-cam, cults3d, FB or RCGroups if possible). I'll send your the coupon code to download from cults3d.
Nice last 2 flights
Pretty cool now if we can just invent a super fast lightweight covering method I am so tired of ironing
That would be cool!
bugbugbug at 8:15 :)
🎉🎉🎉
Congratulations! The winners for Hyperbolic Manta give away.
Please send me your private contact information (through UA-cam, cults3d, FB or RCGroups if possible). I'll send your the coupon code to download from cults3d.
8:15 Bug 😊
8:15 🪲
8:15
Sorry, it’s closed already.
It flies very well
too bad, Im late for the manta game
Thanks