Car sounds great man, love it! I got this single exit straight through Magnaflow on mine, obviously doesn't look quite right and is quieter than I wanted, basically the same setup as you mod wise on an E90 but gutted secondaries. This tempts me to go for the delete now but I'm worried without the secondaries I'll get pulled over 24/7. Yours seems pretty loud from what I can tell already.
yep! its pretty loud already, its not crazy loud if you shift under 3000 rpm though. When it goes into the second stage on the intake manifold it can get a bit raspy. I have a 135i muffler going on soon which will quiet it down a bit
thanks josh, I want to make it sound a bit better. I think at the moment its a bit too raspy. I might add a bmw performance exhaust on it to tone it down a bit for track
Dope set up if it were me i would delte the resonator you have and add a performance resonator or i would add another resonator sounds really good those headers really give it a different tone
theres a technique to make it pop crazy without a tune, i have a 328i e90 and i only have muffler and resenator delete it pops more than this. try to rev it on p reach 3 k rpm minimum and let go and lightly tap the gas pedal several times while rpm is going down, and make a video cuz its gonna be lit
@@gamingoverdose2792 yeah i know of this technique, i still have my resonator because I didn't want any drone but it would be louder probably way too obnoxious. I will post a video of that soon, but i'm pretty sure the resonator cancels out a lot of it
@@GoatedOne201 i got a manual exhaust cutout set up instead of the resonator and when i open it its loud and pops when i close it it sounds exactly like stock even when resonator isnt there
@@farhenheit628of1200 meaning full catless with headers? Will be very raspy and probably pop like hell also very loud. It will also drone a lot. There are bids of that setup pretty sure. It doesn't sound bad but just not my type
@@bruce_son Your car sounds awesome man. I actually have a 328XI with the N51 Stage 2 AA tune. Got AA headers, secondary cat delete, and muffler. Only kept the resonator. I have to say I'm actually pretty happy with the way it sounds. Sure could tone it down a bit but honestly its controllable loud. I have almost 0 rasp. The only issue is the car shaking and ear popping drone from 2500rpm to 3000 rpm. I love to cruise at 85-90mph and at those speeds the rpm is sitting at 3kprm. Not sure how to get rid of it without making it much quieter. I was thinking install 2 resonators in place of the secondary cats.
Pretty sure I spoke to you like 5-6 months ago. I was riding in my friends low white 86. You have the comp or apex wheels right, don't remember. My ig is bimmerson92 you can hmu on there
Did you have to do any kind of flash tune to allow the disa valves in the intake manifold to work, because the n52 328i manifolds dont have disa valves. Also what did you do for tuning?
i have a sulev N52 3009 328i and about to get auto werke headers and i have a magna flow muffler you think this is a good set up?? and some type of tune after but don’t know what tune
Thinking about getting headers for my n52, already did the bimmerlabs tune and put a 3 stage intake manifold and silicone intake boot on it. Where did you get your headers from and is it just a plug and play install?
You will want a tune with the headers or else it will run rich. Having run both, AA or the Aliexpress headers have the same quality. Been running over 2 years hard without any cracks. Supersprint is the best though. Pretty much plug n play other than the tune but it'll still run fine
Just a bit of fiddling around and time. Its not that hard just time consuming to get all the o2 sensors and nuts out. Having a friend help you will definitely make it faster. It took me 5-6 hours on jack stands solo
I used AA headers. Its a bit raspy with the muffler delete, I plan to get some type of muffler sooner or later since it is very loud sometimes. Drone is very little at 75 around 2800rpm in 6th gear
@@Monkojama ua-cam.com/video/ISAiDjlIisI/v-deo.html heres a more recent video of driving with the headers. if you want a little louder, get a secondary cat delete. Headers will basically double the sound
@@bruce_son will shops even do that? I can't fab or anything. I love the sound, of it, all i care about is if the drone is atrocious, like to the point where you can't even listen to music. how would you rate the drone, 1 being fantastic, 10 being you're going deaf
@@Monkojama I kept my resonators so its not terrible. When I had only the muffler delete, I would say the drone would be at 2-3. With the headers around 5, it drones more under 3000rpm but once your above 70-75 it doesnt drone badly anymore. You need to find a fabrication shop. What state are you in? You could also buy the Supersprint Section 1 Cat deletes and basically all you need to do is cut the old pipe and put clamps on the new pipes provided. They are around 250-300
Car sounds great man, love it!
I got this single exit straight through Magnaflow on mine, obviously doesn't look quite right and is quieter than I wanted, basically the same setup as you mod wise on an E90 but gutted secondaries. This tempts me to go for the delete now but I'm worried without the secondaries I'll get pulled over 24/7. Yours seems pretty loud from what I can tell already.
yep! its pretty loud already, its not crazy loud if you shift under 3000 rpm though. When it goes into the second stage on the intake manifold it can get a bit raspy. I have a 135i muffler going on soon which will quiet it down a bit
Love this build!! I can’t wait to get headers as well
Was reading the "Clean slate w $3k" thread on e90post and had to jump in to say that it sounds really good!
thanks josh, I want to make it sound a bit better. I think at the moment its a bit too raspy. I might add a bmw performance exhaust on it to tone it down a bit for track
Dope set up if it were me i would delte the resonator you have and add a performance resonator or i would add another resonator sounds really good those headers really give it a different tone
theres a technique to make it pop crazy without a tune, i have a 328i e90 and i only have muffler and resenator delete it pops more than this. try to rev it on p reach 3 k rpm minimum and let go and lightly tap the gas pedal several times while rpm is going down, and make a video cuz its gonna be lit
the higher the rpm the louder the pops...
@@gamingoverdose2792 yeah i know of this technique, i still have my resonator because I didn't want any drone but it would be louder probably way too obnoxious. I will post a video of that soon, but i'm pretty sure the resonator cancels out a lot of it
@@gamingoverdose2792 too bad resonator delete makes it raspy lol pops are not important. A deep nice sound is important.
@@GoatedOne201 i got a manual exhaust cutout set up instead of the resonator and when i open it its loud and pops when i close it it sounds exactly like stock even when resonator isnt there
Mah man not lying, I got an E90 328i 2010 and i always do the same thing. It pops like crazy!!
Sounds Heavenly!!!…💯✊🏾
Sounds good brother! Can’t wait too get exhaust on mines!
thanks man, I actually switched to a 135i muffler. It sounds much better now
@@bruce_son you think if I go full straight pipe it’ll sound like doo doo? From the exhaust manifold back?
@@farhenheit628of1200 meaning full catless with headers? Will be very raspy and probably pop like hell also very loud. It will also drone a lot. There are bids of that setup pretty sure. It doesn't sound bad but just not my type
@@bruce_son stock headers and two front cats.
But everything after that straight pipe. So header-back exhaust.
@@bruce_son Your car sounds awesome man. I actually have a 328XI with the N51 Stage 2 AA tune. Got AA headers, secondary cat delete, and muffler. Only kept the resonator. I have to say I'm actually pretty happy with the way it sounds. Sure could tone it down a bit but honestly its controllable loud. I have almost 0 rasp. The only issue is the car shaking and ear popping drone from 2500rpm to 3000 rpm. I love to cruise at 85-90mph and at those speeds the rpm is sitting at 3kprm. Not sure how to get rid of it without making it much quieter. I was thinking install 2 resonators in place of the secondary cats.
Car sounds amazing, I noticed you mobbing on redwood, I got a white e92 328i let me know if you ever want to cruise together,
Pretty sure I spoke to you like 5-6 months ago. I was riding in my friends low white 86. You have the comp or apex wheels right, don't remember. My ig is bimmerson92 you can hmu on there
@@bruce_son yeah I’m pretty sure you did, fasho I got you
that sounds awesome! so just a muffler delete and headers?
yup just that. It is pretty loud, too much for me. I've been on a 135i muffler for a few years now.
That sounds amazing
This sounds creepily identical to my Volvo lol. Although raspier. Sounds great
I added on a muffler, the rasp was too much for me plus too many cops
Motorsport sound 😍
Sounds great! Which intake manifold?
I currently have a stock 3 stage intake manifold from a e90 330i
That shit sound tuff champ! Plan on gettin headers on mine I already have res delete muffler delet an second cat what kinda headers are those?
Did you have to do any kind of flash tune to allow the disa valves in the intake manifold to work, because the n52 328i manifolds dont have disa valves. Also what did you do for tuning?
bimmerlabs has a free tune for disa valves. Don't spend money on that
i have a sulev N52 3009 328i and about to get auto werke headers and i have a magna flow muffler you think this is a good set up?? and some type of tune after but don’t know what tune
Sulev is n51. I would get the headers first and see if you like the sound. It is already pretty loud. You can get a stagefp tune after
@@bruce_son my bad meant N51 but appreciate it bro
@@bruce_son wait so bro the magna flow muffler would make it even louder? so if it’s too loud what should i add??
@@sethwilliams3909 it won't be that loud. the magnaflow will make it louder. I just recommend doing it in steps so you don't regret on any decisions
Hey man you think you can send me the link to same headers u got? I can’t seem to find them so that would be nice if you can send me a link for it.
What headers did you put on ??
still have stock resonator & 2nd cats?
Yup
Thinking about getting headers for my n52, already did the bimmerlabs tune and put a 3 stage intake manifold and silicone intake boot on it. Where did you get your headers from and is it just a plug and play install?
You will want a tune with the headers or else it will run rich. Having run both, AA or the Aliexpress headers have the same quality. Been running over 2 years hard without any cracks. Supersprint is the best though. Pretty much plug n play other than the tune but it'll still run fine
@@bruce_son okay I see, what kind of tune cause I already tuned it with bimmerlabs to a 330 after putting the manifold on.
I know 328i’s have a lot of back pressure, do you lose all of it from taking mufflers off? Trying to do something similar to my 328
won't be noticable, sure you can lose a little bit of torque at low end. but it will flow better above the midrange.
The system is already so restricted with all the cats, and then a resonator. Removing just the muffler will be ok 👌
Did it ever shoot flames with this setup after a long hard drive?
No I did not have a burble tune that would dump fuel into my exhaust
did u tune it for it to pop like that or just headers and muffler delete ?
not tuned yet, just headers and muffler delete. after the tune it should pop less as it is running a bit too rich right now
How hard was the install for the headers?
Just a bit of fiddling around and time. Its not that hard just time consuming to get all the o2 sensors and nuts out. Having a friend help you will definitely make it faster. It took me 5-6 hours on jack stands solo
How did you get rid of the lifter ticks?
I have an 07 before the revised lifters, I currently just live with the problem it doesn't do anything
@@bruce_son Oh okay, thank you for replying so quickly!
@@allen9818 yeah no worries, some people will say you need to Rev it to get rid of it, it comes and goes I'm not too worried about it
@@bruce_son Thank you so much!!!
what headers did you buy for it
Aa headers
What city is that? Looks like a beautiful area
tijuana mexico
How much did this cost overall?
This setup will run you about 700 or so. Depending on how much your muffler delete costs.
@@bruce_son that’s actually a good price can I do this instead of buying new cats? New primary cats are 3600 can I just get this instead of that?
@@Akac3sh you won't pass emissions or any visual testing.
@@bruce_son does that matter if my car is already registered and plated
teach me how to tune mine 🙏
active autowerke headers?
yes sir!
@@bruce_son where did you get the headers from
What kind of headers!? This sounds really good. Gives that inline six sound. Gotta do this to my 330 e90
I used AA headers. Its a bit raspy with the muffler delete, I plan to get some type of muffler sooner or later since it is very loud sometimes. Drone is very little at 75 around 2800rpm in 6th gear
@@bruce_son so it's pretty loud? I have a muffler delete rn, I wanna go a little louder so I was thinking about headers
@@Monkojama ua-cam.com/video/ISAiDjlIisI/v-deo.html heres a more recent video of driving with the headers. if you want a little louder, get a secondary cat delete. Headers will basically double the sound
@@bruce_son will shops even do that? I can't fab or anything. I love the sound, of it, all i care about is if the drone is atrocious, like to the point where you can't even listen to music. how would you rate the drone, 1 being fantastic, 10 being you're going deaf
@@Monkojama I kept my resonators so its not terrible. When I had only the muffler delete, I would say the drone would be at 2-3. With the headers around 5, it drones more under 3000rpm but once your above 70-75 it doesnt drone badly anymore.
You need to find a fabrication shop. What state are you in? You could also buy the Supersprint Section 1 Cat deletes and basically all you need to do is cut the old pipe and put clamps on the new pipes provided. They are around 250-300
I’m interested in buying headers
0:30 eargasm
You got a tune?
Not in this video, but I have one in the works by bimmerlabs
Too raspy for my taste. I have the Turner Motorsport Axleback exhaust and it has a much nicer sound.
Agreed. I added on a 135i muffler about 2 years ago