2:08 As a soapmaker, I would like to verify that the people who are claiming this, is correct! Distilled water is what is most recommend. However, deionized water or reverse osmosis water, etc... are good alternatives. This is because soap doesn't bind well to the minerals in water. These minerals will react with the soap in a negative way, and reduce the cleaning ability of the soap. The harder your water (soft water vs hard water), the lower results that the soap will get when mixed with the tap water. In your test that you mention wanting to perform (idk if you have done the test yet or not), but unless you have hard water then you might not see a very big difference in the foaming ability. Soft water vs hard water, makes a big difference in the cleaning (and foaming) ability of a soap.
I received my pressure washer ua-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP over the weekend and decided to wait for the sun to come out before firing it up. Was needed to clean the deck. Our last pressure washer broke a couple of seasons ago, and I just hadn't replaced it yet. This one had great comments, so here we are. It was easy to assemble, and the trigger wand is comfortable and easy to hold for long periods of time. The pressure washer worked great and made quick work of the "TN North side algae" that inevitably grows every year. I also washed all of the deck furniture while I was at it... it all looks great! So far I am happy with this purchase. I plan to climb the ladder to wash siding over the next couple of days, will update if I have anything else to add after that!
Thank you for taking the time on this. I was just starting to look for my next soap. Started with the Costco Meguiers soap and wax that you reviewed a while ago.... But I want to live that thick foam life! Again, Thank you!
As a UA-cam creator myself, I am very impressed with your videos. I am going to use your link to purchase once I see the next video to decide the best foam product!.
Using either DI or distilled water in the cannon to mix with the soap yields better results because the chemicals in the soap can more readily bind and “react” with the pure water. If there are minerals, the soap doesn’t mix and react with the water as well as intended/designed.
The whole point of a pre-wash is to remove as much dirt as possible, so surely it would be better to test the cleaning power of each product rather than how much it foams? I love a product that foams as much as everyone else but I see from testing on other channels that some runny foams actually have better cleaning power.
true but there's really no way to thoroughly and evenly test that at all. Hell if you wanted maximum cleaning power, everyone would be using dawn haha. People also use the foam as lubricant as they scrub car with washmit which is why the more foam the better.
Check out a channel called Alfie Detailing. He's a detailer out of Indonesia who tests the cleaning power of a lot of snow foams. For an amateur production, he has a lot of positives with his testing process: 1) The roads in Indonesian must be ROUGH, cause his white car is always filthy, which happens to be a perfect test bed for cleaning power 2) He pre-rinses with a pressure washer. This seems to be the most basic step, but so many people test cleaners of all sorts without doing a pre-rinse. If you don't do a pre-rinse, you have no idea if it's the pressure washer or the chemical doing the actual work when you pressure wash the chemical off 3) I think the bluntness of other cultures is hilarious and get a kick out of his videos lol To save you time - regular car soaps in a foam cannon don't do anything in terms of pre-cleaning, and a pre-rinse with a pressure washer is going to remove more dirt than a regular car soap & foam cannon ever will. You need a dedicated pre-rinse product, otherwise you're wasting your money. The only dedicated pre-rinse products that seem to work right now are Bilt Hamber Touchless and Auto Foam, Autobrite Magifoam, and CarPro Lift. Griots Garage has a product called Foaming Surface Prep that I haven't seen tested yet, but it looks like it might be promising
In order to make this a better comparison, you should fill the water level prior to adding the soap. Also, how well something foams does not indicate how well it will clean or lubricate the surface. I will generally only use a soap that is either ph neutral or a ceramic type of wash depending on what I am washing. Additionally, as you continue testing the same panel it can change dwell times of the soap. DI water has a huge impact on foam too. It is nice to see how well some of the soaps foam though.
i actually disagree with your observation. Using a "scientific method" in the test - everything was done following the same methodology, including noting Ph level (neutral acidic or alkaline), the use of de-ionized water and noting any deviation in the test from manufactures directions. Thickness and foam "hang time" and sheeting was noted. And each panel test was done the same. So, IMHO, the comparison did answer the question of which best soap for foam canon.
@@petecallamaras6422 Still doesn't tell you how well it cleans or lubricates the the panel. Also the first soap on a dry panel will have an increased dwell time over one tested on a wet panel. The longer the test goes on, the cleaner and more lubricated the panel will become.
Although I plan to get some Mr. Pink or one of the other top performers, I had previously purchased Turtle Wax Max Power based on an RV detailing video from Pan. I decided to try it in the pressure washer system I just assembled (Karcher 1800 psi / 1.2 gpm, Uberflex hose, MJJC V3.0 / 1.1mm orifice), just because I had it already. They recommend mixing it 50:50 with water for foam cannons, so that's what I did, and it produces really nice foam. It's not as good as the best soaps tested here, but it's not far off, so I'll stick with it until I use it up.
Feel a little bias towards the Mr. Pink, Meguiars looked just as good if not better, and I see the soap I purchased is not going to be very good in comparison to Mr Pink and Meguiars.. Thanks, like the vid.
Awesome compare. Much appreciated. Just bought some of your links also much appreciated for the schooling and time/money saving of figuring this out by trial and error. Great channel..subbed !
Meguiar’s and Chemical Guys are just way superior against any other DIY brand hands down. I only use those two for different things. One compensates the other and vice versa.
Can you just use well water? Probably silly question, but I’ve heard doing mobile detailing that using certain water can cause spots on the car when you wash it.
So I get the foam thickness and lather, which one does the actual cleaning remove dirt and contaminates , so you can do little to no contact washing? I like to foam but more cleaning abliltes Im here In Las Vegas, Nv where there is real dirt, dust, road grime dirt
TYVM for helpful videos. FYI -1oz =30ml or 30cc. A shot glass/jigger for cocktails are cheap and easily found. Careful as many are made for 2oz or 60ml. That should be perfect for you and these tests. lids? Idk… since Idk the diameter of the lids, hard to say, but they look smaller than 1oz each, even guessing at 1/2oz (4 caps)…? Grab a cheap imported cocktail jigger🙂pls.
I have a Simpson 3000 psi gas pressure washer for years. Can I use this pressure washer for foam can on only? I wont rinse the car w the pressure washer. Thanks
Thanks for the video - the missing link here, that wasn't tested is: Which one of these leaves the *LEAST* spots after thoroughly rinsing? I used the ArmorAll brand shown and it was HORRIBLE for leaving a mass of huge spots, even though I rinsed the crap out of the vehicle.... it left some sort of residue and resulting 'haze-like film' over the painted surface, big spots everywhere. Also, maybe mention how all these soaps work with typical well water in a suburban setting. Do you use 'softened' water in your shop? What do you do to combat spotting, after the vehicle dries.... I couldn't even blow the water off in time with my EGO 650 blower before the vehicle dried off..... I am sure the outside sun and heat is a factor... although the day I did it, it was sunny and about 72 degrees. Thanks for your insights.... I am looking for the best foam soap, but that also has the BEST water spot resistance.
Awesome video josh , much respect for all your hard work that you have it into your videos . I am new to snow foam and i have cleaned both of my cars only once with it so far . I noticed afterwards that the chrome around the windows on both cars are now stained . Is there a way to get rid of that and get the chrome like new again ? Please help
I appreciate your tests and comparisons, but in order to accurately evaluate and compare products, the manufacturer’s directions should be followed. I am not an Armor All fan, but even though the cost per wash would be higher, their recommended ratio of product to water was not used in the test. Using about 20 cents per ounce of each different detergent modifies the intended formulas. Some products are more concentrated than others. Better cost analysis could probably be accomplished with equal amounts of label instructed, mixed solutions. Thanks for performing your comparisons.
Agreed but I would rather know how concentrated something is because to me a $10 for a 32oz bottle less concentrated is more expensive than a $40 gal that's more concentrated
@@skillz101989 the concentrations within each product doesn't change...at least not with the products I've used. It shouldn't change either because that would be unfair to the consumer.
@@skillz101989 Agreed 100% on Dawn...and not just Dawn. There's other very cheap soaps you can get that work great...but back to this concentration thing...I can't fathom that a smaller bottle has higher concentration of soap vs a bigger bottle. That reeks of consumer affairs fraud if the pricing doesn't match up to me. I can understand them saying put more in the bottle cap, etc because the bottle might be smaller but the mix should be the same across all sizes.
Do griots garage brilliant finish! $12-13 for a 64 ounce bottle. I use that with a little bit of no rinse and they smell amazing, foam great, and provide great lubricity
please excuse my complete ignorance with this topic but I have to ask... what is the big deal about the thickness of the foam? surely all that matters is how it cleans and leaves the car when finished? My local hand car wash uses a foaming product via a pressure lance system.... it runs off quite quickly - but leaves a super clean finish once rinsed and dried.
I’ve seen some videos from UK that stipulate if foam to thick it’s to dry and doesn’t clean as well. Comments? Thoughts? It made sens looking at the comparison in the video. Thank you
Interesting video...thanks for posting. DI water does help quite a bit with enabling suds....hard water kills suds. I've had a CR Spotless system but thought it was more of a pain than it was worth. For my foam canon I use distilled, but just tap water for the bucket wash. My go-to soap for both steps is CG Honeydew, but would like to try the Mr. Pink at some point. To prolong the performance of your canon, be sure to fill it with clean water and run it for at least 30 seconds when you're done. You're right that the stainless mesh can gunk up otherwise.
I’m a detailer and been doing the work for about 5 years and I really enjoy your videos and info but if u could do a little less talking and just hop on in to testing that would be awesome! Haha keep up the good work!
I love you channel but wanted to point out that the concentrations of each brand may be different. The could be using more water in the soap, lol. I think following the instructions on each bottle would be most accurate while recording the amount for each bottle full to gauge the price per wash. Thanks for all you do!
That's was my Red Raptor on that Meguiar's Ultimate Snow Foam ;) Couple things worth mentioning - USF was developed with use on protected vehicles in mind (ie having wax, sealant or a coating on the vehicle) and unlike any other snow foam, it actually clings BETTER to a hydrophobic surface than a neglected one (AND it is formulated to NOT strip wax/sealants or clog coatings). It is an incredibly trick formula with two types of foam to maximize not just foam thickness, but CLING time (which is paramount for snow foam to actually do work). So on oxidized/neglected/unprotected paint like that test vehicle it actually has a bit of a disadvantage as that is not an intended application. Lastly, regarding the dilution ratios, unlike other brands that disingenuously suggest using just 1-2 ounces of soap in the foam cannon (which would equate to between a 8:1 and 16:1 when used in either 16oz or 32oz snow foamers), and would yield absolute GARBAGE results, Meguiar's recommends a realistic and functional 5:1. 5:1 is actually VERY good, as most brands requires a 3:1 ratio for truly thick foam (including chemical guys). So in reality, to get comparable maximum thickness foam, you will find USF will outperform other soaps that mislead and suggest you only need 1-2 ounces of soap per cannon fill. -MK
Something to think about is since you filled up the bottle with soap first and then water, there is already a lot of foam in the bottle which could affect the amount of foam being produced. Maybe try adding water first, then the soap. Also, I would like to see cold water vs. warm water in the foam cannon! Thanks for all your awesome reviews, I ended up purchasing the 1600psi Ryobi unit because of your reviews!
Trying to find a good car shop for matte/satin paint ( my whole car is not Matte, just my hood, roof, and trunk) so I guess a car soap that is both good for Matte / satin paint and also regular paint.
I’ve never even used a foam cannon, but there was an actual audible difference in the pressure washer when you used the Meguiars with the 1.25 orifice compared to the 1.1 I definitely wouldn’t have imagined there would’ve been.
Two different foam cannons. He went from armor all to mjjc. The mjjc is a very sought after foam cannon by detailer and extremely high end compared to the cheap foam cannons out there.
Di water makes a huge difference, I was using plain tap water for the longest then got a di tank similar to yours and immediately noticed that the foam was thicker and not as watery. But I would like to see your comparison to see if my experience is the same for you.
I would have to add that DI water used in at least the final rinse is key to a great detail job. The problem is with most portable units it’s very expensive to purchase and maintain. I have yet to find a supplier in my area that has tanks and does tank swaps.
@@davidbaca7853 if you are in the sgv area near LA there is a spot I could recommend you, let me know if you are from this area. And you are correct definitely needed for the final rinse but I was just referring to the foam aspect.
Hey Josh, So my question is that I wonder if I can mix the chemical guys foam soap honeydew with the hydrosuds high-gloss hyper foaming si02 ceramic car wash soap into a cannon that I bought from harbor freight would work out???
Yes it had. This "test" is flawed in so many ways frankly it is embarrasing. Doesnt even try to search wich soap drinse dirt of best....wich is the purpose of soap... This guy does no good for the ones that are serious in the detailing business.
I didnt think of that… it’s possible but I’ve been able to get thick foam even on ceramic coated cars so if it does affect anything it would be minimal. Thanks for that insight though!
I’ve been watching your reviews on electric power washers that have been very interesting. I’m looking for the best electric power washer to use in a commercial kitchen as well as a soap cleaning agent. Surfaces are painted concrete block walls, stainless steel, concrete floors and a washable fiberboard on other walls. I would also be using this around my house and yard. I know you are a car detailer but any advice you can share would be appreciated.
at 11:31 , how is the chemical guys better ? Because even though super thin, armor all was sticking to the panel a lot better than this one. or is it because it was already cleaned by armor all, so less dust and less sticking ? Because if not, then armor all stayed on more and is better ?
It foams better with DI or distilled water because the minerals do not cause the soap to break down and when coming into contact. Warm water also works better. Filling cannon with soap and distilled water is great if you don’t have DI water
As far as foaming goes, the Mr. Pink looked great. Having used it several times on my car however, the cleaning ability is strongly lacking. I'll be sticking with P&S Pearl as my shampoo and continue looking for a solid, foaming pre wash
I would guess that de-ionized water would foam better similar to the way that soft water produces better shampoo suds in the shower than hard water (like from wells), but that's just a guess on my part. One question, I wonder if the results from the soaps later in the lineup are in any way altered (such as persistence of foam) by any potential residue left from the early soaps (such as that wash-n-wax product), or just the vehicle getting cleaner?
Wow, amazing, I just ordered my first presure washer for car washing, gonna try this foam cannon stuff. Stupid quedstion, after the car is foamed, do I just rinse it or should I use some microfiber mitt or sponge?
both actually. If you use a high ph soap you can foam, let it dwell, then rinse just to remove the heavier dirt build up. But you will still need to do a contact wash. So usually i prerinse the car, foam it, then do a bucket wash using the sioap in the bucket and the foam to add lubrication and break down dirt, then i rinse it all away!
This video could have been edited much better but it’s a great video with fantastic info. Just wish we could have got to each test more back to back, Test: 1: rate /10 Rinse Test: 2: rate /10 Etc etc
Already looking forward to tomorrow's results. I'm currently using gold class and have great results. Looking forward to seeing how it stacks up in this test. But! Already considering moving to Mr. PINK LOL
2:08 As a soapmaker, I would like to verify that the people who are claiming this, is correct! Distilled water is what is most recommend. However, deionized water or reverse osmosis water, etc... are good alternatives. This is because soap doesn't bind well to the minerals in water. These minerals will react with the soap in a negative way, and reduce the cleaning ability of the soap. The harder your water (soft water vs hard water), the lower results that the soap will get when mixed with the tap water.
In your test that you mention wanting to perform (idk if you have done the test yet or not), but unless you have hard water then you might not see a very big difference in the foaming ability. Soft water vs hard water, makes a big difference in the cleaning (and foaming) ability of a soap.
I received my pressure washer ua-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP over the weekend and decided to wait for the sun to come out before firing it up. Was needed to clean the deck. Our last pressure washer broke a couple of seasons ago, and I just hadn't replaced it yet. This one had great comments, so here we are. It was easy to assemble, and the trigger wand is comfortable and easy to hold for long periods of time. The pressure washer worked great and made quick work of the "TN North side algae" that inevitably grows every year. I also washed all of the deck furniture while I was at it... it all looks great! So far I am happy with this purchase. I plan to climb the ladder to wash siding over the next couple of days, will update if I have anything else to add after that!
Thank you for taking the time on this. I was just starting to look for my next soap. Started with the Costco Meguiers soap and wax that you reviewed a while ago.... But I want to live that thick foam life! Again, Thank you!
So what did u end up getting and the results ...advise please
@@ultra787212 years later and still wanting that response
Man do you understand how much product ive wasted half filling the foam cannon then the rest with water . Thanks for this
As a UA-cam creator myself, I am very impressed with your videos. I am going to use your link to purchase once I see the next video to decide the best foam product!.
put your water in the cannon first them pour the soap in it. it wont foam up on you and you can fill it up properly lol
You’re right when it foams up it loses efficiency
@@Legendary62548 use hot water in your foam cannons too. itll create better foam
Add a little semen for ultra foam
Lol
@@ebx2323LMAO
Mr. Pink has always been my favorite!
It’s my go to
Using either DI or distilled water in the cannon to mix with the soap yields better results because the chemicals in the soap can more readily bind and “react” with the pure water. If there are minerals, the soap doesn’t mix and react with the water as well as intended/designed.
The whole point of a pre-wash is to remove as much dirt as possible, so surely it would be better to test the cleaning power of each product rather than how much it foams?
I love a product that foams as much as everyone else but I see from testing on other channels that some runny foams actually have better cleaning power.
true but there's really no way to thoroughly and evenly test that at all. Hell if you wanted maximum cleaning power, everyone would be using dawn haha. People also use the foam as lubricant as they scrub car with washmit which is why the more foam the better.
The key word here is FOAM cannon...
Testing the foam is most visual. Testing the cleaning power between all of them is very tricky but I’m trying to figure out a way to do it!!
Check out a channel called Alfie Detailing. He's a detailer out of Indonesia who tests the cleaning power of a lot of snow foams. For an amateur production, he has a lot of positives with his testing process:
1) The roads in Indonesian must be ROUGH, cause his white car is always filthy, which happens to be a perfect test bed for cleaning power
2) He pre-rinses with a pressure washer. This seems to be the most basic step, but so many people test cleaners of all sorts without doing a pre-rinse. If you don't do a pre-rinse, you have no idea if it's the pressure washer or the chemical doing the actual work when you pressure wash the chemical off
3) I think the bluntness of other cultures is hilarious and get a kick out of his videos lol
To save you time - regular car soaps in a foam cannon don't do anything in terms of pre-cleaning, and a pre-rinse with a pressure washer is going to remove more dirt than a regular car soap & foam cannon ever will. You need a dedicated pre-rinse product, otherwise you're wasting your money. The only dedicated pre-rinse products that seem to work right now are Bilt Hamber Touchless and Auto Foam, Autobrite Magifoam, and CarPro Lift. Griots Garage has a product called Foaming Surface Prep that I haven't seen tested yet, but it looks like it might be promising
Bilt Hamber
In order to make this a better comparison, you should fill the water level prior to adding the soap. Also, how well something foams does not indicate how well it will clean or lubricate the surface. I will generally only use a soap that is either ph neutral or a ceramic type of wash depending on what I am washing. Additionally, as you continue testing the same panel it can change dwell times of the soap. DI water has a huge impact on foam too. It is nice to see how well some of the soaps foam though.
i actually disagree with your observation. Using a "scientific method" in the test - everything was done following the same methodology, including noting Ph level (neutral acidic or alkaline), the use of de-ionized water and noting any deviation in the test from manufactures directions. Thickness and foam "hang time" and sheeting was noted. And each panel test was done the same. So, IMHO, the comparison did answer the question of which best soap for foam canon.
@@petecallamaras6422 Still doesn't tell you how well it cleans or lubricates the the panel. Also the first soap on a dry panel will have an increased dwell time over one tested on a wet panel. The longer the test goes on, the cleaner and more lubricated the panel will become.
Also have to give it to Mr. Pink. I also use the 1600 Ryobi in a Griots Garage Brilliant Finish foam cannon. Can't wait for the next video to drop!
Please test Adam’s Mega Foam
I’ve tried so many and I ALWAYS go back to Adams Mega Foam lololol
Great foam but expensive.
It’s on part 2 of the test! Amazing product just a bit expensive
Man it's a bit pricey but I love that shit so so much
these are noce but my go to is Honeydew Snow Foam by Chemical Guys
Wow theeeeeee best comparison on the internet!! Thank you!! Well appreciated!!!
Although I plan to get some Mr. Pink or one of the other top performers, I had previously purchased Turtle Wax Max Power based on an RV detailing video from Pan. I decided to try it in the pressure washer system I just assembled (Karcher 1800 psi / 1.2 gpm, Uberflex hose, MJJC V3.0 / 1.1mm orifice), just because I had it already. They recommend mixing it 50:50 with water for foam cannons, so that's what I did, and it produces really nice foam. It's not as good as the best soaps tested here, but it's not far off, so I'll stick with it until I use it up.
I like that you’re using some off the shelf products that I have, great and fair comparison, thanks Josh 👍😁
I kinda want to see a full paint correction on that 4runner 😱🤗
Feel a little bias towards the Mr. Pink, Meguiars looked just as good if not better, and I see the soap I purchased is not going to be very good in comparison to Mr Pink and Meguiars.. Thanks, like the vid.
I use the gold class and I love it, but I might switch to the spot free one since I was my car mostly by myself. I will take any help I can get lol
Im down with the pink.. 🤙🏼
Please test gtechniq foam. I've been using it and not happy with it. I have to put almost 4 to 5 Oz and still runny
Hi mate great content 👍..you said you dont use bead maker because you have a better one and its cheaper..wich is that one please..thank you
My interest is how well the soap cleans all the nook and crannies without being caustic to the surface. But thanks for the vid 🙏
What's your alternative to bead maker??
This man loaded this video with so many adds
Awesome compare. Much appreciated. Just bought some of your links also much appreciated for the schooling and time/money saving of figuring this out by trial and error. Great channel..subbed !
I used Mr pink all last year in my pressure washer foam canon. It leaves a ton of spots behind unless you was it off and hand wipe it down.
Yes, it should foam better. It would be great if you could test PSI and GPM of different units using tap, vs treated water.
Gold class is my go to soap. Can't wait to see how it compares to the rest
Gold class in a foam cannon works great. I've tried it after seeing a video on this.
@antoniolazzaro7052 gold class what dilution rate mate as I have it
What I use. Easy to get and great results.
Meguiar’s and Chemical Guys are just way superior against any other DIY brand hands down. I only use those two for different things. One compensates the other and vice versa.
Which car schampoo would you prefer for ceramic coated surface and waxes surfaces? Would you recommend one schampoo for me?
Can you just use well water? Probably silly question, but I’ve heard doing mobile detailing that using certain water can cause spots on the car when you wash it.
So I get the foam thickness and lather, which one does the actual cleaning remove dirt and contaminates , so you can do little to no contact washing? I like to foam but more cleaning abliltes Im here In Las Vegas, Nv where there is real dirt, dust, road grime dirt
I wonder how baby shampoo would work ? I’m going to try it !
TYVM for helpful videos. FYI -1oz =30ml or 30cc. A shot glass/jigger for cocktails are cheap and easily found. Careful as many are made for 2oz or 60ml. That should be perfect for you and these tests. lids? Idk… since Idk the diameter of the lids, hard to say, but they look smaller than 1oz each, even guessing at 1/2oz (4 caps)…? Grab a cheap imported cocktail jigger🙂pls.
Looks nice, which cleans the best tho?
Could you do a review of one or two bucket wash. Thanks
Can you test out Turtle Wax 53411 Hybrid Solutions Ceramic Wash and Wax also. Thanks
I have a Simpson 3000 psi gas pressure washer for years. Can I use this pressure washer for foam can on only? I wont rinse the car w the pressure washer. Thanks
Thanks for the video - the missing link here, that wasn't tested is: Which one of these leaves the *LEAST* spots after thoroughly rinsing? I used the ArmorAll brand shown and it was HORRIBLE for leaving a mass of huge spots, even though I rinsed the crap out of the vehicle.... it left some sort of residue and resulting 'haze-like film' over the painted surface, big spots everywhere.
Also, maybe mention how all these soaps work with typical well water in a suburban setting. Do you use 'softened' water in your shop? What do you do to combat spotting, after the vehicle dries.... I couldn't even blow the water off in time with my EGO 650 blower before the vehicle dried off..... I am sure the outside sun and heat is a factor... although the day I did it, it was sunny and about 72 degrees. Thanks for your insights.... I am looking for the best foam soap, but that also has the BEST water spot resistance.
I been using chemical guys for awhile. But also find Adam’s polishes makes a good one.
Do you have the top ten foam cannons you like and pricing? I just started watching you and have learned a tremendous amount
Awesome video josh , much respect for all your hard work that you have it into your videos . I am new to snow foam and i have cleaned both of my cars only once with it so far . I noticed afterwards that the chrome around the windows on both cars are now stained . Is there a way to get rid of that and get the chrome like new again ? Please help
I appreciate your tests and comparisons, but in order to accurately evaluate and compare products, the manufacturer’s directions should be followed. I am not an Armor All fan, but even though the cost per wash would be higher, their recommended ratio of product to water was not used in the test. Using about 20 cents per ounce of each different detergent modifies the intended formulas. Some products are more concentrated than others. Better cost analysis could probably be accomplished with equal amounts of label instructed, mixed solutions. Thanks for performing your comparisons.
I get that! I’ll do that on the next set of soaps I test! Thanks
Agreed but I would rather know how concentrated something is because to me a $10 for a 32oz bottle less concentrated is more expensive than a $40 gal that's more concentrated
@@skillz101989 the concentrations within each product doesn't change...at least not with the products I've used. It shouldn't change either because that would be unfair to the consumer.
@@GSP-76 maybe but I've used other products and notice it more with dish soap. Dawn works a lot better than cheap soaps and use less for cleaning
@@skillz101989 Agreed 100% on Dawn...and not just Dawn. There's other very cheap soaps you can get that work great...but back to this concentration thing...I can't fathom that a smaller bottle has higher concentration of soap vs a bigger bottle. That reeks of consumer affairs fraud if the pricing doesn't match up to me. I can understand them saying put more in the bottle cap, etc because the bottle might be smaller but the mix should be the same across all sizes.
Do griots garage brilliant finish! $12-13 for a 64 ounce bottle. I use that with a little bit of no rinse and they smell amazing, foam great, and provide great lubricity
What do you think of ethos car care products like the car foam shampoo?? Just wondering cause I never see no one use that name brand
please excuse my complete ignorance with this topic but I have to ask... what is the big deal about the thickness of the foam? surely all that matters is how it cleans and leaves the car when finished? My local hand car wash uses a foaming product via a pressure lance system.... it runs off quite quickly - but leaves a super clean finish once rinsed and dried.
I’ve seen some videos from UK that stipulate if foam to thick it’s to dry and doesn’t clean as well. Comments? Thoughts? It made sens looking at the comparison in the video. Thank you
Thanks for testing out mr pink! That's all i needed
Interesting video...thanks for posting. DI water does help quite a bit with enabling suds....hard water kills suds. I've had a CR Spotless system but thought it was more of a pain than it was worth. For my foam canon I use distilled, but just tap water for the bucket wash. My go-to soap for both steps is CG Honeydew, but would like to try the Mr. Pink at some point. To prolong the performance of your canon, be sure to fill it with clean water and run it for at least 30 seconds when you're done. You're right that the stainless mesh can gunk up otherwise.
Especially is using a wash and wax. That extra bit of chemical can really clog it
Can u plz tell me your Ryobi PW+ what wand you're using?
this one! amzn.to/3rHbf2V
Thanks for the vids
I bought a Lexus f sport 350 and I want to treat her well
So I’m going to buy this stuff
I’m a detailer and been doing the work for about 5 years and I really enjoy your videos and info but if u could do a little less talking and just hop on in to testing that would be awesome! Haha keep up the good work!
Great test! However during the foaming I’d prefer if you didn’t zoom in that much. Thanks for doing the comparison the way you did though!
I agree with the zooming in comment. That was so annoying.
I love you channel but wanted to point out that the concentrations of each brand may be different. The could be using more water in the soap, lol. I think following the instructions on each bottle would be most accurate while recording the amount for each bottle full to gauge the price per wash. Thanks for all you do!
That's was my Red Raptor on that Meguiar's Ultimate Snow Foam ;) Couple things worth mentioning - USF was developed with use on protected vehicles in mind (ie having wax, sealant or a coating on the vehicle) and unlike any other snow foam, it actually clings BETTER to a hydrophobic surface than a neglected one (AND it is formulated to NOT strip wax/sealants or clog coatings). It is an incredibly trick formula with two types of foam to maximize not just foam thickness, but CLING time (which is paramount for snow foam to actually do work). So on oxidized/neglected/unprotected paint like that test vehicle it actually has a bit of a disadvantage as that is not an intended application.
Lastly, regarding the dilution ratios, unlike other brands that disingenuously suggest using just 1-2 ounces of soap in the foam cannon (which would equate to between a 8:1 and 16:1 when used in either 16oz or 32oz snow foamers), and would yield absolute GARBAGE results, Meguiar's recommends a realistic and functional 5:1. 5:1 is actually VERY good, as most brands requires a 3:1 ratio for truly thick foam (including chemical guys). So in reality, to get comparable maximum thickness foam, you will find USF will outperform other soaps that mislead and suggest you only need 1-2 ounces of soap per cannon fill.
-MK
Something to think about is since you filled up the bottle with soap first and then water, there is already a lot of foam in the bottle which could affect the amount of foam being produced. Maybe try adding water first, then the soap. Also, I would like to see cold water vs. warm water in the foam cannon! Thanks for all your awesome reviews, I ended up purchasing the 1600psi Ryobi unit because of your reviews!
Yes please start with the same amount of water then add the soap.
Trying to find a good car shop for matte/satin paint ( my whole car is not Matte, just my hood, roof, and trunk) so I guess a car soap that is both good for Matte / satin paint and also regular paint.
Do you have a video on where and how to change out the orifice on said form Cannon
How to get MORE FOAM from your Foam Cannon | Car Detailing Tips and Tricks | Pressure Washing
ua-cam.com/video/KUfU8-kjpyk/v-deo.html
Is it safe to use a high pressure gas pressure washer for washing cars or is the rhino type electric pressure washer the better choice?
hello friend, which soap do you recommend to remove impurities from the paint, the clean slate will work for me,?
More soap suds doesnt mean more cleaning power. Which one would be best for a dirty car? Thanks.
I came across a new soap product would you be able to review it. It's called Bowden's mega foam job
Meguiar's D11001 Hyper-Wash with a 1.1 orifice left my car nice and clean, plenty of foam. $29 a gal
Thanks for all you do man! Definitely my new favorite UA-cam channel 🤙🤙🤙
I’ve never even used a foam cannon, but there was an actual audible difference in the pressure washer when you used the Meguiars with the 1.25 orifice compared to the 1.1
I definitely wouldn’t have imagined there would’ve been.
Two different foam cannons. He went from armor all to mjjc. The mjjc is a very sought after foam cannon by detailer and extremely high end compared to the cheap foam cannons out there.
Where do you get the 1.1 office to replace the other one.
Thanks
The MJJC 2.0 Pro comes with the 1.1 as a secondary
You should do a review on Bead Maker vs. the alternative brand you spoke about.
Following! Yeah curious what product you're using other than beadmaker thanks!
@@markyrose79 probably Tec 582
@@danielcastorena3057 Could be but he said it's cheaper than Bead Maker and TEC582 is about $6.00 bucks more a gallon, at least on Amazon?
@@Ryan_H22 maybe, but you use more beadmaker to Tec582 and beadmaker doesn't last much. So maybe it is more cost effective.
first i used beadmaker..then switch to tec582,
tec582 feels slicker than breadmaker, and attracts less dirt/dust compare to beadmaker.
Di water makes a huge difference, I was using plain tap water for the longest then got a di tank similar to yours and immediately noticed that the foam was thicker and not as watery. But I would like to see your comparison to see if my experience is the same for you.
I would have to add that DI water used in at least the final rinse is key to a great detail job. The problem is with most portable units it’s very expensive to purchase and maintain. I have yet to find a supplier in my area that has tanks and does tank swaps.
@@davidbaca7853 if you are in the sgv area near LA there is a spot I could recommend you, let me know if you are from this area. And you are correct definitely needed for the final rinse but I was just referring to the foam aspect.
Thanks for the response but I’m actually in the Houston Texas area.
@@davidbaca7853 just call around (if you haven't already) and I'm sure you'll have one that does .
@@toXic_viRus01 send me the address
I prefer the maguires over mr pink as I have found mr pink can strip wax even though it’s not supposed to.
What's the best product to use with coatings. Dont want waxes to worsen great coatings.
This is the video I needed!!! Earned a subscription and a like 🤙🏽
Great video I have that pressure washer I just ordered that foam Cannon
Nice Camaro 👍
Does doubling the soap make any difference in foam produced.
Hey Josh,
So my question is that I wonder if I can mix the chemical guys foam soap honeydew with the hydrosuds high-gloss hyper foaming si02 ceramic car wash soap into a cannon that I bought from harbor freight would work out???
Just a thought. Could it be that the Walmart soap with wax had an effect on surface tension on those that followed?
Yes it had. This "test" is flawed in so many ways frankly it is embarrasing. Doesnt even try to search wich soap drinse dirt of best....wich is the purpose of soap... This guy does no good for the ones that are serious in the detailing business.
I didnt think of that… it’s possible but I’ve been able to get thick foam even on ceramic coated cars so if it does affect anything it would be minimal. Thanks for that insight though!
To compare the cost you should do cost per 1000ml mix at the recommended dose by the manufacturer.
Could you try Meguiars hyper wash for the next test.
I’ve been watching your reviews on electric power washers that have been very interesting. I’m looking for the best electric power washer to use in a commercial kitchen as well as a soap cleaning agent. Surfaces are painted concrete block walls, stainless steel, concrete floors and a washable fiberboard on other walls. I would also be using this around my house and yard. I know you are a car detailer but any advice you can share would be appreciated.
Have you tried the chemical guy’s hydrosuds ceramic wash? And if so is it any good with the foam cannon
at 11:31 , how is the chemical guys better ? Because even though super thin, armor all was sticking to the panel a lot better than this one. or is it because it was already cleaned by armor all, so less dust and less sticking ?
Because if not, then armor all stayed on more and is better ?
What pressure are you spraying at
What's the alternative you use instead of the P & S bead maker?
I'd like to know too.
It foams better with DI or distilled water because the minerals do not cause the soap to break down and when coming into contact. Warm water also works better. Filling cannon with soap and distilled water is great if you don’t have DI water
whats your cheaper alternative to bead maker?
As far as foaming goes, the Mr. Pink looked great. Having used it several times on my car however, the cleaning ability is strongly lacking. I'll be sticking with P&S Pearl as my shampoo and continue looking for a solid, foaming pre wash
Does p&s have self cleaning properties?
Hot water is the difference maker and a water softener in your system even if household. You will notice a big difference in suds
DRAMATIC ZOOM IN!!! -inserts 70s kungfu music- silly question though can some “snow foams” be used in those foam guns? (Garden hose style)
I would guess that de-ionized water would foam better similar to the way that soft water produces better shampoo suds in the shower than hard water (like from wells), but that's just a guess on my part.
One question, I wonder if the results from the soaps later in the lineup are in any way altered (such as persistence of foam) by any potential residue left from the early soaps (such as that wash-n-wax product), or just the vehicle getting cleaner?
More great info! Are there some soaps that are more "GREEN" than others that clean and you can recommend? Our storm sewers go to the Cheasapeake Bay.
Wondering if you have tried Koch Chemie Gentle Snow Foam yet
Wow, amazing, I just ordered my first presure washer for car washing, gonna try this foam cannon stuff. Stupid quedstion, after the car is foamed, do I just rinse it or should I use some microfiber mitt or sponge?
both actually. If you use a high ph soap you can foam, let it dwell, then rinse just to remove the heavier dirt build up. But you will still need to do a contact wash. So usually i prerinse the car, foam it, then do a bucket wash using the sioap in the bucket and the foam to add lubrication and break down dirt, then i rinse it all away!
This video could have been edited much better but it’s a great video with fantastic info.
Just wish we could have got to each test more back to back,
Test: 1: rate /10
Rinse
Test: 2: rate /10
Etc etc
Why are you don’t use carpro or koch chemie?
How do I order the 1.1mm Orifice and foam cannon? Do I have to order them separately or can I just go on Amazon and order all in one piece?
You should try MS Schippers TandT supposed to be good
Already looking forward to tomorrow's results. I'm currently using gold class and have great results. Looking forward to seeing how it stacks up in this test. But! Already considering moving to Mr. PINK LOL
what foam do you use on a jeep soft top
What about performance of the soap? This compares foam,.
Hey bud awesome video what nozzle are you running for rinsing?
Alway good content, and I am only 10 seconds into the video....very down to earth
Which has the best road grime cutting and least work