Das ist ein sehr gutes Video aber leider waren die kabel beim anschliessen der Akkus immer verdeckt von deiner Hand das ich nicht erkennen konnte an welchen Pol sie angelötet wurden
I bought 5 of these It's 3S 20A BMS But problem with them is that you can't charge your battery pack. I tested all 5 and all 5 can't charge it batteries. Why ? You need to activate them to start charging. Btw i putted already full batteries on it before first charge
Nice video.Not all has spot welder. But the soldering should be done swiftly. But bro one thing I noticed that you are using non insulated battery, as in lithium battery the top is only positive rest body is negetive. You are literally playing with fire. This is very dengerous. Re-sleeve the batteries or use new batteries or atleast use electric tape to insulate the batteries.
There are many videos on how to make a high density battery pack but no one showed how to charge it.Thanks to you for covering this part too!
the wires from the batteries to the BMS must be of the same cross-section and length - so that they have the same resistance
Nice video I like it
Solar charging direct may be use.?
Das ist zer gut!
✌
Das ist ein sehr gutes Video aber leider waren die kabel beim anschliessen der Akkus immer verdeckt von deiner Hand das ich nicht erkennen konnte an welchen Pol sie angelötet wurden
Hi what hapens if i only use the negative an positive 12 volts of Batery without s2 and s3 connected ... will it still work
Is short circuit protection available in this bms?
Yes
My router is of 12V. what will happen if dont use the buck booster pcb XL 6009 ?? is it neccessary ? Please reply
I bought 5 of these
It's 3S 20A BMS
But problem with them is that you can't charge your battery pack.
I tested all 5 and all 5 can't charge it batteries.
Why ?
You need to activate them to start charging.
Btw i putted already full batteries on it before first charge
Good video
Thanks
Hey my friend how do you know that the charge is already complete? regards
BMS Indicate LED From Red To Blue
thanks
You should make switch on-off from bms to adaptor...just for safety
Thanks, Sure
I made one with this same circuit but it is not charging
Check BMS, Wiring Points, Also Check If Any Battery Dull Or Not Connected
@@fineaditya all points connected,it is giving output but not charging.charging MOSFET output not coming.
Charge nhi ho rhi
Aapne bnaya h kiya ye sarkit
@@farukhagwan8577 ha
Yes
Check BMS, Or You Can Also Use 12.6V With Other Direction
dont copy this guy, soldering directly onto the batteries is a no no
if there is no option for spot welder . after that this process will be work.
@@fineaditya that makes no sense, soldering directly onto the batteries is dangerous, if you don't have a spot welder then don't make videos
@@gavshere thanks for your appreciation bro🌷🌷
Nice video.Not all has spot welder. But the soldering should be done swiftly. But bro one thing I noticed that you are using non insulated battery, as in lithium battery the top is only positive rest body is negetive. You are literally playing with fire. This is very dengerous. Re-sleeve the batteries or use new batteries or atleast use electric tape to insulate the batteries.
@@somdutttah NO, you should never solder directly to the cell, swifty or not
หมุนจนกูงง