Really helpful video. But remember to hold those nuts tight, I dropped one nut inside the spoiler and now I may need a tutorial on how to remove the spoiler lol. If you still feel your spoiler is still loose, open the plastic cover panel of the 3rd brake light, and there are two more nuts that you may also need to tighten. I bought M6-1.0mm flange nuts from Home Depot, and it works well, just use them with a 10mm deep socket.
Thanks for watching. Thank you for the great advice I didnt know about the 2 in the middle. I am sure others will benefit from your advice. Thank you, Thats what makes this community great!
Great video to share. I had the same problem with a CX5. However, under the internal black plastic cover is another two identical threads with nuts that were only finger tight. In addition to tightening the four nuts, I applied nail polish on the threads so the nuts cannot easily work loose again. Nail polish remover can easily be applied if the nuts need to be removed.
Please include commentary on the simpler mechanical necessities, such as the "Mechanic's Guarantee" the work is done via the two pats on the workpiece. The youth must know
Really helpful video. But remember to hold those nuts tight, I dropped one nut inside the spoiler and now I may need a tutorial on how to remove the spoiler lol. If you still feel your spoiler is still loose, open the plastic cover panel of the 3rd brake light, and there are two more nuts that you may also need to tighten.
I bought M6-1.0mm flange nuts from Home Depot, and it works well, just use them with a 10mm deep socket.
Thanks for watching. Thank you for the great advice I didnt know about the 2 in the middle. I am sure others will benefit from your advice.
Thank you, Thats what makes this community great!
Great video to share. I had the same problem with a CX5. However, under the internal black plastic cover is another two identical threads with nuts that were only finger tight. In addition to tightening the four nuts, I applied nail polish on the threads so the nuts cannot easily work loose again. Nail polish remover can easily be applied if the nuts need to be removed.
What size nut was used?
Edit: figured it out, the nut was 6mm
Thank you for your help 👍
@@oscargarcia7418 Your welcome Thank you for watching!
Please include commentary on the simpler mechanical necessities, such as the "Mechanic's Guarantee" the work is done via the two pats on the workpiece. The youth must know
Ah yes, I must include that for future video's. Its like flicking the ratchet strap and saying " That Wont Go Anywhere"
Great video! I learned a lot.
Thank you for watching and leaving a positive comment.
Just found that there are two more nuts along the middle of the spoiler as well. You must take the top mount middle brake cover out to reveal them.
Thanks!
Your welcome, Thanks for watching!
Ty!
💥 p͎r͎o͎m͎o͎s͎m͎