Thanks! I like your very educational videos. I live and Norfolk Virginia. I have a Mercedes Benz Sprinter 2500 which has lit up the check engine light recently 2 days after I took it to dealership for state safety inspection. If your only within an hour away I'd to schedule my sprinter for diagnostics and repair. You got my complete confidence. Even with check engine light the engine is running fine but after a while of running it above 60 mph it seems like the the turbo is weakening.
I think that 572 is a default number that the computer outputs when it detects a problem with the sensor. It recognizes it can’t trust the actual information, so it randomly displays a default value. The reason I say that is exhaust temps normally get to 500+\- during normal driving, so it shouldn’t recognize that as too high. Not that it matters because you still identified a defective sensor. Awesome diagnostic process.
Love love your videos mate. I just discovered your vids 3 weeks ago. Your very good in the explanation of what your doing. Your the first guy I’ve subscribed too. And I have watched thousands of videos. That said. I’m having trouble with a P0471 code on my 2012 Mercedes 3500 sprinter. It comes and goes on its own. I have replaced the exhaust pressure sensor. At least I think I have. Any chance you could address the code problem in a video. And showing where this sensor is and how to correctly test it and wiring to it. Thanks in advance for any light you can shed on this matter
Steve Hunter My Pleasure! Thanks, I will make a video when a vehicle with that problem comes around! you can email me at Deo@calleva.org if you have any questions
I own 2012 Sprinter 2500, with same issues. Currently the van won’t start at all! Does anyone think that a badly clogged DPF can cause a NO Start? Mr. K , please chime if you can
Hmm, the van only clicks when I turn the ignition….. the engine had a really bad knock before it refused to turn over. But all the codes show clogged DPF,
Hi K Diagnostic, your videos spot on 10/10, I'm wondering if you can help me with my VW Crafter 50 Van, 2.5 lts. turbo diesel, 2010 model, my little OBD2 reader, show me P2BAC, Nitrogen oxides, limit exceeded, and P2002: DPF exceeded threshold bank 1, I had cleaned exactly like you showed me in your videos, with Liqui Moly, cleaner and purge, with the Liqui Moly spray gun as well, white smoke coming out, like your videos, I was so happy, but after 20 minutes on the Fwy, the engine when into a limp mode, back home slowly, then I changed the oil, filter, and carried out and other cleaning with Liqui Moly again, no much smoke coming out this time, but I couldn't get out of the limp mode, my little reader doesn't let me, the question is how I can got out the limp mode, also which scanner do you recommend to carry out the DPF regeneration, and others stuff, but not the $10k the Snapon Zeus, too expensive for me, Autel for DIY- Small Shop, will do it thanks
@@KITS_Auto_and_Truck_Repair Please can you be more specific which Auto Scanner will do a DPF Regen for DIY 2008 Dodge diesel. I have been in LIMP MODE HELL for 4 years and need to clean my DFP or do an emissions delete kit. An amazon link for the best affordable scan tool would be ideal. Thank you. YOU TOTALLY ROCK btw, I learned SOOOOO MUCH from your liqui moly DPF clean vids and I am not afraid any more.lol
When my 2008 dodge sprinter goes into limp mode I turn the engine off and on and it resets it until I go up another hill and piss off my clogged DPF and then we are limpy again.
Hello buddy and thank you for all of your help. I own a 2016 sprinter 3500 Dully that 3 lights came on, abs, anti skid (anti lock) and tire pressure sensor light, according to online info it said it was the abs sensors but o didn’t know which one so I went ahead and installed all 8 of them 4 and and 4 wear pad. I started it up and the lights were stop there, tried to clear codes but lights never went away. So I took it got a drive thinking it needed to be driven for codes to clear but the vehicle is now in limp mode, it doesn’t drive and when you try driving it its max speed is about 20 mph and the brake light comes on but shuts off when you stop. Please help. Thank you
@@KITS_Auto_and_Truck_Repair my 2008 Sprinter 3500 occasionally throws P0544 Exhaust GTS circuit trying to find what exactly the triggering factor , it comes ones in a while , any suggestions ?
Greetings Deo ; you are way too much brother , you are great !!! Thanks a lot for all your technical imput Deo I have a question ; my uncle has a 2006 mercedes benz sprinter 5 cylinder , diesel ; he says it has oil leaking from the intercooler hose , going to the intake manifold , what he should check or replace ? Thanks for everything .
Tai Nguyen I have a video here on this channel that shows you step by step how to clean a DPF, go to my playlist and find my How to clean a DPF video!!
112k miles..,maybe that sprinter🤔is lowerQuality then M.B??my is a M.B.2014..with 260k Miles..and i just did clutch,flywheel and all brakes with discs..but dpf and cat i will replace soon..i already loosing power..without check engine light on.
@@KITS_Auto_and_Truck_Repair Of course..same here on US Cars..they not domestic..so all parts needs to be imported..so prices doubles..i import much stuff.....i not know if they produce MB OEM Parts in the USA ..like MB cars..but i doubt it because most OEM parts are produced by suppliers..in East Europe or Asia..because of cheaper labourcosts.
DEAR SIR,
YOU ARE AS CLEAR AS THE SUN LIGHT WITH YOUR DIAGNOSTICS. RIGHT ON THE MONEY. THANKS A MILLION.
sam bitar My Pleasure!!
This is Sprinter Academy. I like the way you analyze the entire process. Great videos. Thank you.
Dragos B My Pleasure! Thanks!
Thanks! I like your very educational videos. I live and Norfolk Virginia. I have a Mercedes Benz Sprinter 2500 which has lit up the check engine light recently 2 days after I took it to dealership for state safety inspection. If your only within an hour away I'd to schedule my sprinter for diagnostics and repair. You got my complete confidence. Even with check engine light the engine is running fine but after a while of running it above 60 mph it seems like the the turbo is weakening.
Edmundo Rodriguez Thank you for Donating to the channel, I appreciate it! Our Sop is in Dickerson MD, Email me at Deo@calleva.org for more info!
Thanks!
Edmundo Rodriguez Thank you for your donation I appreciate it!
Thank you Mr. Deo we learned a lot from you great video❤❤❤❤❤❤❤❤
@brucesavath1494 My Pleasure!
I think that 572 is a default number that the computer outputs when it detects a problem with the sensor. It recognizes it can’t trust the actual information, so it randomly displays a default value. The reason I say that is exhaust temps normally get to 500+\- during normal driving, so it shouldn’t recognize that as too high. Not that it matters because you still identified a defective sensor. Awesome diagnostic process.
Che Kelley Yes, you're right that makes sense, Thanks for your input!!
Love love your videos mate. I just discovered your vids 3 weeks ago. Your very good in the explanation of what your doing. Your the first guy I’ve subscribed too. And I have watched thousands of videos. That said. I’m having trouble with a P0471 code on my 2012 Mercedes 3500 sprinter. It comes and goes on its own. I have replaced the exhaust pressure sensor. At least I think I have. Any chance you could address the code problem in a video. And showing where this sensor is and how to correctly test it and wiring to it. Thanks in advance for any light you can shed on this matter
Steve Hunter My Pleasure! Thanks, I will make a video when a vehicle with that problem comes around! you can email me at Deo@calleva.org if you have any questions
EXCELLENT MR.K
Understand clearly you are the best.
Timmy Tran Thank you!!
Congratulations to are class mate for promoting are channel, good work for K Diagnostic to, thank you
Suleman Habib My Pleasure!! Thanks
Tampa Florida check in love your content
Bob D Thank you!
very good job....Thank you.
@MrMANRIQUE73 My Pleasure!
Great work done, like always!
Lidia Santos Thank you!!
I own 2012 Sprinter 2500, with same issues. Currently the van won’t start at all! Does anyone think that a badly clogged DPF can cause a NO Start? Mr. K , please chime if you can
ernelm Yes, a clogged DPF can cause a no start, do you have good fuel pressure and compression?
Hmm, the van only clicks when I turn the ignition….. the engine had a really bad knock before it refused to turn over. But all the codes show clogged DPF,
Nice work men where you located.I got a 2007 dogde sprinter van too I will like for you to check it out for me. Thanks
Aneudy Jimenez My Pleasure!! I'm located in Dickerson MD, you can email me at Deo@calleva.org for shop info!
brother help me out… where is air intake temperature sensor located on that engine?
@garnikhakobyan4311 next to the throttle body!
I appreciate that 🙏🏼
Hey i have a ban wit the same problem...im at south carolina. Were you have your shop?
Martin Avila My Shop is in Dickerson Maryland!
Hi K Diagnostic, your videos spot on 10/10, I'm wondering if you can help me with my VW Crafter 50 Van, 2.5 lts. turbo diesel, 2010 model, my little OBD2 reader, show me P2BAC, Nitrogen oxides, limit exceeded, and P2002: DPF exceeded threshold bank 1, I had cleaned exactly like you showed me in your videos, with Liqui Moly, cleaner and purge, with the Liqui Moly spray gun as well, white smoke coming out, like your videos, I was so happy, but after 20 minutes on the Fwy, the engine when into a limp mode, back home slowly, then I changed the oil, filter, and carried out and other cleaning with Liqui Moly again, no much smoke coming out this time, but I couldn't get out of the limp mode, my little reader doesn't let me, the question is how I can got out the limp mode, also which scanner do you recommend to carry out the DPF regeneration, and others stuff, but not the $10k the Snapon Zeus, too expensive for me, Autel for DIY- Small Shop, will do it thanks
Ricardo Bellina I would recommend buying an Auto scanner!
@@KITS_Auto_and_Truck_Repair Please can you be more specific which Auto Scanner will do a DPF Regen for DIY 2008 Dodge diesel. I have been in LIMP MODE HELL for 4 years and need to clean my DFP or do an emissions delete kit. An amazon link for the best affordable scan tool would be ideal. Thank you. YOU TOTALLY ROCK btw, I learned SOOOOO MUCH from your liqui moly DPF clean vids and I am not afraid any more.lol
When my 2008 dodge sprinter goes into limp mode I turn the engine off and on and it resets it until I go up another hill and piss off my clogged DPF and then we are limpy again.
@@kevalbliss I don't know any DIY Scanner that I can recommend! You can check some autel scanner, they might be good!
So please let us know where is your shop I want to bring my 2008 dodge sprinter to you
momin kadir Our shop is in Dickerson MD, you can email me at Deo@calleva.org for shop address and more!!
Great video thank you, I have a coupe with EML on P0428. Car drives fine, can you point me in the right direction please?
Art * My pleasure!! check your exhaust temp sensor circuit! if the circuit is good then the problem is most likely your sensor!!
awesome Big Thank
Pierre Lesage My Pleasure!
Hello . Great job you are doing, I wanted to know the step by step technique please to properly adjust the shifter cable on the sprinter 518
Fabrice Babillon Thanks!! I got your request!! I will make a video about the shifter cable when one with that problem comes around!!
@@KITS_Auto_and_Truck_Repair Thank you super For the next video on this subject good luck
@@fabricebabillon5398 My Pleasure!! Thank you!
Great video 👊🏼
Che Kelley Thank you!!
Hello buddy and thank you for all of your help. I own a 2016 sprinter 3500 Dully that 3 lights came on, abs, anti skid (anti lock) and tire pressure sensor light, according to online info it said it was the abs sensors but o didn’t know which one so I went ahead and installed all 8 of them 4 and and 4 wear pad. I started it up and the lights were stop there, tried to clear codes but lights never went away. So I took it got a drive thinking it needed to be driven for codes to clear but the vehicle is now in limp mode, it doesn’t drive and when you try driving it its max speed is about 20 mph and the brake light comes on but shuts off when you stop. Please help. Thank you
R M What codes do you have in memory right now!
Boss please answer me
When l drive the van like 10-15 min after a beeping in the dashboard and start loosing power ( do you think turbo is bad )
@cengiz028 get it scanned and see what DTTC you have in the PCM!
P123900 charge pressure too low
P16E100 boost pressure too high ( turbo )
P159300 exhaust back pressure sensor
And thank you for answering me
Hello , it's helpful , wonder to know the the model and make of the scan tool you use , mind to share the model and make of scan tool please ?
John Lonappan I used the Snapon Zeus Scanner in this video!
@@KITS_Auto_and_Truck_Repair thank you, what’s the best way to buy one of this tool cost effective? I noticed these tools are costing $10k+
@@johnlonappan7945 you can call your local Snapon rep or google them and they will answer your questions!
@@KITS_Auto_and_Truck_Repair my 2008 Sprinter 3500 occasionally throws P0544 Exhaust GTS circuit trying to find what exactly the triggering factor , it comes ones in a while , any suggestions ?
@@johnlonappan7945 check the sensor wiring or the sensor itself!!
Greetings Deo ; you are way too much brother , you are great !!!
Thanks a lot for all your technical imput
Deo I have a question ; my uncle has a 2006 mercedes benz sprinter 5 cylinder , diesel ; he says it has oil leaking from the intercooler hose , going to the intake manifold , what he should check or replace ?
Thanks for everything .
@CesarCano-e7x My Pleasure! Oil in the charge air cooler hose would be caused by a leaking turbo
@KITS_Auto_and_Truck_Repair thank you Deo , I appreciate it .
Can you tell me with how I can spray to clean the DPF later
Tai Nguyen I have a video here on this channel that shows you step by step how to clean a DPF, go to my playlist and find my How to clean a DPF video!!
Mass airflow sensor 🚙
@ShannyBananny07 Shanny Baby!!
Thank you for your video very informative and helpful, can you come to my van ? I’m in South East London 😂
david hood My Pleasure! I would if I could Hahaha!
Where are you located?
Maxwell Froget I'm located in Dickerson MD, Email me at Deo@calleva.org for shop info!
Hi ! Where are u based?
@nicolaepopiela1857 Hello! I'm located in Dickerson MD, you can email me at kitsautoandtruckrepair@gmail.com for shop info!
Good Job👍🏻
Koné Zoumana Thank you!!
I live in Idaho. You would be worth the trip.
Byways Aww!! Thank you!!
I also have no power when I put it in reverse, you have to step on the had too much to make it move. It only has 40K miles
R M what codes do you have now?
0208 code
112k miles..,maybe that sprinter🤔is lowerQuality then M.B??my is a M.B.2014..with 260k Miles..and i just did clutch,flywheel and all brakes with discs..but dpf and cat i will replace soon..i already loosing power..without check engine light on.
@ricksworlddereaux2397 Ah ok! Good Luck with your van!
@@KITS_Auto_and_Truck_Repair Overhere MB parts are cheap..its a domestic Carbrand ..and labour too..if its without a receipt..👍🤔🇪🇺
@@ricksworlddereaux2397 Oh Really? That's nice, Maintaining a MB is here is pretty expensive
@@KITS_Auto_and_Truck_Repair Of course..same here on US Cars..they not domestic..so all parts needs to be imported..so prices doubles..i import much stuff.....i not know if they produce MB OEM Parts in the USA ..like MB cars..but i doubt it because most OEM parts are produced by suppliers..in East Europe or Asia..because of cheaper labourcosts.
@@ricksworlddereaux2397 Yes!!
2021 Sprinter code P2457, what is it?
Nadiya Zvarych That code has something to do with the EGR cooling system not working well, so you need to test the EGR system!!
@@KITS_Auto_and_Truck_Repair Thx
@@nadiyazvarych1893 My Pleasure!!
Hey buddy
I got a 18 3500 sprinter with dpf tampered shut down
Walter Rolon That's not good, the entire aftertreatment system has to be restored!
How you clear disabled starter motor due to tampered dpf sistem
After mechanic replaced nox sensors
Walter Rolon I'm sorry, I didn't understand your question!
Hi handsome, more videos please. Thanks
G O My Pleasure! There more videos coming out stay tuned!
What is your business name and address I like to bring my sprinter to you
momin kadir Email me at Deo@calleva.org and I will send you our shop's address and phone number!
Thanks ☺️
Jesus Malagon My Pleasure!!