The most important think for DIY videos I wish they all did was say the mistakes they make and how they problem solved. Most of us DIYers are amateur, we haven’t made a ton of mistakes YET because this might be our first or couple handful projects. So even with an instructional video, we are bound to still make mistakes.
Definitely yes to tying in more electronics with your word working! I've been trying to plan a similar project except I want to run the low voltage wire through the drywall behind it. You just gave me a great idea exactly how to do it!
Watching this video, I came up with a similar idea as you did. So...Ditto!, I have a wall in my front room I was at first contemplating a full wall build out. However, using the floating wall system will utilize less material, looks good, and easier to move around if needed. I also though of running the wires in the wall as you did.👍😎😀
@@alexandremartins7856 If they are RF, it's likely the three lights can all work off the same remote. Once the switch is "on" on all three - then you can use the remote to trigger the lights.
This is the first of your videos I've seen. Great shop setup. Most importantly, I really like the way you not only talk about safety, but you really PRACTICE safety as well! Earplugs, glasses, push sticks, etc.
I've seen a lot of videos of DIY'ers doing LED lights, and I would have to say that your video is by far the best so far. I have been an electrician for 30 years now and have done more LED lights than I can say. You hit a home run on this one, however, I would have just run a power wire to the shelves and not used battery operated LED's, but that's what I do for a living anyway. Great job!
@@burtan2000 And you'll have to take all the stuff off the shelf to get to the battery! I'm done doing any battery devices. Seems like a great idea, but after a year of constantly having to charge things it's annoying.
@@RyanTerry if you watched the video, he accounted for that and made an accessible charging port so he wouldn't need to take the shelf off to charge it.
@@RyanTerry OR I would make a USB-c charging port to the side of the shelf, so you can charge whenever needed or constantly put on charge (but not sure if the battery would explode overtime)
Done something close to this with my kids floating shelves... But I drilled into the dry wall and dropped cables from each of the Floating shelves behind the dry wall to a wall dry line box and powered from mains usb power instead of battery packs. No worrying about charging or hot battery packs while charging then. Great job and looks so well. Well done.
For a truely hidden switch (with no standby power draw), consider using a “normally open” reed switch embedded inside the shelf. Then just place a strong magnet over the top of the reed switch to turn it on.
Dude, I've been doing odd and ends carpentry for about five years now. I'm so OCD when it comes to perfection. I have every tool imaginable, but still learning every time I build something. Today I built 4 floating shelves for each side of our fireplace. I used the tape method I saw in your video, and OMG! Game Changer! Thank you so much for posting this video. This made things so much easier!
Great video! Very similar to the way I build floating shelves and as the electronics keep digging into that… so much you can do with low voltage and wood. I have 25+ years in the 12v/audio/video world and now I incorporate that into almost every project with lighting or moving panels. They have power supplies that are super small and thin just for low voltage lighting. Hardwired is the way to go vs battery especially for a no hassle no call back customer service point of view. Not a big deal for people like us to change batteries but most of customers want out of site out of mind hassle free!! Just my 2 cents. Keep up the awesome clean work and keep the videos coming.
You are right about going wired. These items are not much electricity draws and newer electronics can be worked via phone/alexa for a truly seemless voice turn on/off. Is there.a good video for hardwired floating shelf? I'm looking to use one over a bed that has built in light/wireless charger/usb ports.
I love the subtle comedy in your videos, the inception plug in was dope. I always use blue painters tape in my floating shelf glue ups. It holds strong and doesn't tar out any wood fibers when you remove it, nor does it leave any adhesive behind that you have to sand off or may clog any wood grain.
Mike: “Today, I’m gonna be picking up some filament tape from my local store…” Cashier: “Uh, sir? This is a Wendy’s. We don’t sell t-” Mike: “-ON MODERN BUILDS.”
I really like that you incorporate projects within projects, but I enjoy longer show the process videos. I’m a dabbler of the things…resin to plywood end grain to copper and concrete.
yes be nice, u basically have to have a full carpentry shop and a good knowledge of carpentry..be so easy to screw up that expensive plywood...he does a beautiful job.
I like that, in spite of the fact that I've seen several videos on how to make a very similar floating shelf, I still learn something new, or I'm able to follow along like I already do know. Not sure if I'll build a floating shelf like this anytime soon but this is a cool build.
I just love how clean everything is when u build it.. even when it's simple or complicated it always comes out super clean... great job brad.. u definitely deserve a diet mountain dew to celebrate
Hi Brad, I just came across this video on my feed and gotta say, I absolutely loved your work, edit and pace. I have never done anything like this in my life, but I am wishing to do it in the future, so I really enjoy seeing videos like yours to learn and get ideas from. Keep up the great work! Just subscribed to see more in the future.
I would have gone with wired power inside the wall, but that’s just me. The 5v would route from a box behind the cabinet and plug into each shelf in or through the supports. This also eliminates the power switches. That said, great job and thanks for the detailed, but not boring instructions and hints. Even the goofs were worth seeing.
Yeah having a remote doesn't make sense if you have to press a button to enable the remote. It's unlikely you would turn off these lights while you are using the shop.
Turned out awesome Brad! Would be cool if there was a way to charge the battery packs wirelessly but plugging in every so often wouldn't be that bad I guess. Hopefully I'll be home from the Packers/Chiefs game to get on the live tonight.
Great job Brad! Always enjoy your videos. Your one of my favorite to watch. You actually really helped me out when I first started wood working because mistakes where made LOL!!! And that really helped me push forward and not quit
Burnishing the edge is a sweet trick to close up that little gap! It’s really hard to get the longer boards just perfectly mitered to not have any gap. Especially for the typical DIY table saw…. They just don’t cut as precise as needed. Looks great!
Dude, seriously good job on conception and execution. I also enjoy blending woodworking, 3d printing, and microelectronics together. It is seriously a match made in heaven these days with what we can do.
Awesome video! I've been planning a couple of floating shelves for my kitchen remodel and you made this seem mich more doable than I had worked out in my head. What kind of weight do you estimate the shelves should be able to hold?
i like your videos. you are cheesy, yet professional. i also like that you give credit to other youtube channels when you dont know something. really cool!
@JOA_Trades_wouldn’t have to do wall repairs. Just run them through the wall behind where you will install the shelf bracket so the hole is covered by the shelf.
This is absolutly fantastic. You are very good at woodworking and you are interesting to listen to. I will experiment your tutorial soon. I am a begginer in woodworking and I am confident. No experience but lots of positivness ! Thank you again.
beautiful work. you are my biggest inspiration. your jobs are very good. I don't get tired of watching your projects. congratulations. My favorit channel. Eddy, from Brazil
I love that you used the old screwdriver to burnish the edges. I have some old ones I inherited and I don’t use them but would feel bad getting rid of them. I don’t feel bad holding onto to the if I can remember them for those types of tasks.
I generally mock shops that use tens of thousands of dollars in equipment but I realized that the goal here is to show what CAN be done and in many cases how to do a quality job that you could make into a hobby or career if you enjoy it.
Nice work! Don't forget to remind everyone to check where the studs on the wall are so that your ribs on your mounting clete aren't in the way...:) Learned that one the hard way!
I love the magnetic charging cables. Putting one of those adapters in there would have the connection not have dust and stuff gunk it up as easy. And of course everything is better with magnets. LOVE the shelves. Want to have similar when we finally get into a house not an apartment
I bought a wood shelf, used a router with an quarter inch bit, installed an led rope light and I’d say it looks better than what you have. The leds I use are definitely up to snuff as I have lights in my garage that have been on for over a year with no issues.
great project. I have an idea to make the shelves even better. you should have put a board or two horizontally between the shelves so you could turn the three leds of the shelves on and off with just one button
I obsses over making my office space as epic and pro level as possible. Videos like this just inspire me to keep trying to take things to the next level. 🤩
Awesome idea!!! Looks so clean. I made my first floating shelf out of scrap 1/4 MDF and on the fly. It is small and is mounted just above my medicine cabinet to put all my meds on. I need to take it down and refinish it and make the support system a little bit sturdier.
Check out the Office Makeover Playlist here: ua-cam.com/video/wQ_CKmejH_s/v-deo.html
Why countersink the screws or bolts holding up the shelves, it only weakens the support and does nothing else since they are not visible anyway?
This was cool, but entirely too much work.
why not inlay power wires in the wall, you can get good thin wires in there, finish it with mud. even easier to fix if you have drywall
How long did the battery pack last?
You should be selling these amazing shelves. I am buying by the way!
I appreciate that you include/admit mistakes. Too often video DIYers present themselves like they can do no wrong - but we all make mistakes.
The most important think for DIY videos I wish they all did was say the mistakes they make and how they problem solved. Most of us DIYers are amateur, we haven’t made a ton of mistakes YET because this might be our first or couple handful projects. So even with an instructional video, we are bound to still make mistakes.
I like that you include the mistakes into your videos, its adds something wholesome to your work
Definitely yes to tying in more electronics with your word working! I've been trying to plan a similar project except I want to run the low voltage wire through the drywall behind it. You just gave me a great idea exactly how to do it!
Awesome, good luck!
Watching this video, I came up with a similar idea as you did. So...Ditto!, I have a wall in my front room I was at first contemplating a full wall build out. However, using the floating wall system will utilize less material, looks good, and easier to move around if needed. I also though of running the wires in the wall as you did.👍😎😀
That is really cool, super nice job
How did you make the controls work together on the 3 shelves?
@@alexandremartins7856 If they are RF, it's likely the three lights can all work off the same remote. Once the switch is "on" on all three - then you can use the remote to trigger the lights.
This is the first of your videos I've seen. Great shop setup. Most importantly, I really like the way you not only talk about safety, but you really PRACTICE safety as well! Earplugs, glasses, push sticks, etc.
I've seen a lot of videos of DIY'ers doing LED lights, and I would have to say that your video is by far the best so far. I have been an electrician for 30 years now and have done more LED lights than I can say. You hit a home run on this one, however, I would have just run a power wire to the shelves and not used battery operated LED's, but that's what I do for a living anyway. Great job!
The batteries will last a few days. Then charge. Then a few days. Then charge.
@@burtan2000 And you'll have to take all the stuff off the shelf to get to the battery! I'm done doing any battery devices. Seems like a great idea, but after a year of constantly having to charge things it's annoying.
@@RyanTerry if you watched the video, he accounted for that and made an accessible charging port so he wouldn't need to take the shelf off to charge it.
@@tukuiPat excellent. Yes, I quickly scrolled through towards the end so I didn’t see that. Thanks.
@@RyanTerry OR I would make a USB-c charging port to the side of the shelf, so you can charge whenever needed or constantly put on charge (but not sure if the battery would explode overtime)
I love that you include/admit mistakes. Too often video DIYers present themselves like they can do no wrong
i work the same way. love it.
Done something close to this with my kids floating shelves... But I drilled into the dry wall and dropped cables from each of the Floating shelves behind the dry wall to a wall dry line box and powered from mains usb power instead of battery packs.
No worrying about charging or hot battery packs while charging then.
Great job and looks so well. Well done.
Damnnn very NICE, will be doing something like this in my living room for sure
I totally respect your choice of teaching safety.
It IS number one.
I applaud you brother. 👍👍
For a truely hidden switch (with no standby power draw), consider using a “normally open” reed switch embedded inside the shelf. Then just place a strong magnet over the top of the reed switch to turn it on.
That sounds like an awesome idea... something I need to look more into for projects of my own.
I like that
Can you explain more?
I pray someday I’ll get to the point where this doesn’t sound like mandarin
I love electronics. Incorporating them into woodworking projects takes them to the next level!
Loved that you incorporated electric. I vote yes for more more electrical & woodworking videos!
I rarely build a project just like the one in a video. So seeing new techniques or ideas is always welcome.
I love incorporating electronic stuff into builds. Definitely would love to see more.
Dude, I've been doing odd and ends carpentry for about five years now. I'm so OCD when it comes to perfection. I have every tool imaginable, but still learning every time I build something. Today I built 4 floating shelves for each side of our fireplace. I used the tape method I saw in your video, and OMG! Game Changer! Thank you so much for posting this video. This made things so much easier!
Great video! Very similar to the way I build floating shelves and as the electronics keep digging into that… so much you can do with low voltage and wood. I have 25+ years in the 12v/audio/video world and now I incorporate that into almost every project with lighting or moving panels. They have power supplies that are super small and thin just for low voltage lighting. Hardwired is the way to go vs battery especially for a no hassle no call back customer service point of view. Not a big deal for people like us to change batteries but most of customers want out of site out of mind hassle free!! Just my 2 cents. Keep up the awesome clean work and keep the videos coming.
You are right about going wired. These items are not much electricity draws and newer electronics can be worked via phone/alexa for a truly seemless voice turn on/off. Is there.a good video for hardwired floating shelf? I'm looking to use one over a bed that has built in light/wireless charger/usb ports.
I too like electronics. Combining with wood is fun. Please consider more. If you keep the woodwork good then you won't lose your wood subscriptions...
Just what I always wanted, a shelf to remember to recharge as well! If you have a dry wall it would be easier to just run a wire inside the wall imo.
Nice communication and graphic presentations and of course, a masterpiece construction.
First time watching this video on your channel, love it, looking forward to watch more and learn to build 🤙🏼🙌🏼 keep it up!
Thanks, brother!
I love the subtle comedy in your videos, the inception plug in was dope. I always use blue painters tape in my floating shelf glue ups. It holds strong and doesn't tar out any wood fibers when you remove it, nor does it leave any adhesive behind that you have to sand off or may clog any wood grain.
Cool tape tip! Gotta grab some 🔥🔥
It holds like a champ, Mike. Although your gaffers tape looked cooler 😂😂
Hey Mike love your Bus project you did a couple months ago❤️🔥
💳
How far is Joshua Tree from FTBT
Mike: “Today, I’m gonna be picking up some filament tape from my local store…”
Cashier: “Uh, sir? This is a Wendy’s. We don’t sell t-”
Mike: “-ON MODERN BUILDS.”
Ad placement was smooth, and not a bother. Great Work!
I really like that you incorporate projects within projects, but I enjoy longer show the process videos. I’m a dabbler of the things…resin to plywood end grain to copper and concrete.
Man I wish you sold the plans for these! these are the best looking floating shelves I have seen on UA-cam!
I so wish I had the tools to do all this amazing stuff :( Looks absolutely fantastic! Great vid and great tips!
yes be nice, u basically have to have a full carpentry shop and a good knowledge of carpentry..be so easy to screw up that expensive plywood...he does a beautiful job.
Ikea offers the same floating shelf, just need to add the led
Since you asked, I love the electronics videos. They are the ones I'm most likely to watch. This is a great one.
Thanks for the feedback, Wesley!
I like that, in spite of the fact that I've seen several videos on how to make a very similar floating shelf, I still learn something new, or I'm able to follow along like I already do know. Not sure if I'll build a floating shelf like this anytime soon but this is a cool build.
best of the best
yes please, do more electronics. Best regards from Switzerland
Hi Brad, would love electronic tutorial. Have always been intimidated by this. Thanks!! Great job in the vid!!
thanks, Kathleen!
Well done sir! You make it look easy. Anyone who’s tried to build “perfect” box knows that this is far harder than it looks.
I just love how clean everything is when u build it.. even when it's simple or complicated it always comes out super clean... great job brad.. u definitely deserve a diet mountain dew to celebrate
I appreciate that! 💪
Yes sir..
This video helped me to build my own In-Wall L-Shaped long shelves in my living room. Thank you for the inspiration.
Hi Brad, I just came across this video on my feed and gotta say, I absolutely loved your work, edit and pace. I have never done anything like this in my life, but I am wishing to do it in the future, so I really enjoy seeing videos like yours to learn and get ideas from. Keep up the great work! Just subscribed to see more in the future.
Good Job Lori. Chuck was a good pick for a seat tester.
I look forward to many more videos.
I would have gone with wired power inside the wall, but that’s just me. The 5v would route from a box behind the cabinet and plug into each shelf in or through the supports. This also eliminates the power switches.
That said, great job and thanks for the detailed, but not boring instructions and hints. Even the goofs were worth seeing.
Yeah having a remote doesn't make sense if you have to press a button to enable the remote. It's unlikely you would turn off these lights while you are using the shop.
Oh yes, woodworking plus electronics. Definitely!
Turned out awesome Brad! Would be cool if there was a way to charge the battery packs wirelessly but plugging in every so often wouldn't be that bad I guess. Hopefully I'll be home from the Packers/Chiefs game to get on the live tonight.
Yes, wireless would be nice, but that was a whole other step I wasn't ready to commit to 😀 Hope the game is great.
#GoPackGo #CanYouFeelTheLove
Very very glad to see you stressing using a blade guard. Well done.
it looks so effortless when you do, yet when I attempted something similar, it was nothing but problems getting them to all fit together seamlessly :(
Yeah, the joints are tricky to get just right. But constant pressure down and towards the fence is the key. Next time you'll nail it, Keith!
@@Fixthisbuildthat I think a track saw or a really large table is key. Breaking down the sheet is where the errors can happen in my opinion.
When skill and creativity collide.
Great job Brad! Always enjoy your videos. Your one of my favorite to watch. You actually really helped me out when I first started wood working because mistakes where made LOL!!! And that really helped me push forward and not quit
Burnishing the edge is a sweet trick to close up that little gap! It’s really hard to get the longer boards just perfectly mitered to not have any gap. Especially for the typical DIY table saw…. They just don’t cut as precise as needed. Looks great!
Great video man! Just wondering, how much weight do you think the shelves would be able to support?
Dude, seriously good job on conception and execution. I also enjoy blending woodworking, 3d printing, and microelectronics together. It is seriously a match made in heaven these days with what we can do.
Awesome video! I've been planning a couple of floating shelves for my kitchen remodel and you made this seem mich more doable than I had worked out in my head. What kind of weight do you estimate the shelves should be able to hold?
I hope that your sponsors stick with you. You are knowledgeable and entertaining.
i like your videos. you are cheesy, yet professional. i also like that you give credit to other youtube channels when you dont know something. really cool!
I think it would have been easier to just run some low voltage wires through the wall.
Connected to the same light switch to the room light exactly!
@JOA_Trades_wouldn’t have to do wall repairs. Just run them through the wall behind where you will install the shelf bracket so the hole is covered by the shelf.
@@jb3760 This. I'm going to try it this way. Wife won't want to have to keep recharging.
@@jb3760how do you connect to switch
You've really upped your game on the montage music sections! They are inspirational!
Love the ”quick jig”. Lol. Keep the electronics coming too.
😜
This is absolutly fantastic. You are very good at woodworking and you are interesting to listen to. I will experiment your tutorial soon. I am a begginer in woodworking and I am confident. No experience but lots of positivness ! Thank you again.
that 46 degree tip is amazing, thank you
I love electronics!! In college, I was the soldering king in my audio classes!
You really should corner the woodworking + electronics niche!! Go all in!
Wish I had a workshop I would be making stuff like this all day.
DIYs And Machinery tools Come along ways AWESOME 👍🤠👍
I am always amazed what you can accomplish with handcraft, and of course the right tools. I failed completely building a square.
Great video! I like that you show your mistakes and how you fixed them. We're all human after all. Well... most of us anyway.
I would love to watch and learn more about electronics!
I just started BINGE WATCHING you!!!
I love everything about this video. Awesome production value might I add.
That electronic switch for the lights was IMPRESSIVE, gotta try this one day :)
Yes! We want to see all the electronic build videos
God Bless you & your hands! I wish my son can do this
I like it when the mistakes are not covered up in the final video production.
Great shelves!
That jig was fire, I wanna see more of that lol.....electronics are fun to
Yoooo they r badass!! I wasn’t sure i was gonna like it but once it was finished i love it!!
The shelves look AWESOME!!!
beautiful work. you are my biggest inspiration.
your jobs are very good.
I don't get tired of watching your projects.
congratulations.
My favorit channel.
Eddy, from Brazil
I love that you used the old screwdriver to burnish the edges. I have some old ones I inherited and I don’t use them but would feel bad getting rid of them. I don’t feel bad holding onto to the if I can remember them for those types of tasks.
My grandad's screwdriver and I love using it
Well, I was most impressed with the 46° mitre idea to get those sharp edges.
Must try it out over this weekend with some test ply.
Looks like your producing leveled up! Love your content. Thank you for all you do.
You are a true master of your craft!
You have taught me so much! I wish I had the workshop/space like yours, I would be golden.
Glad it's helping, Stacey!
Your videos are great. You’re like the ChrisFix of woodworking.
I generally mock shops that use tens of thousands of dollars in equipment but I realized that the goal here is to show what CAN be done and in many cases how to do a quality job that you could make into a hobby or career if you enjoy it.
Hey Brad, I use to work warehouse. Highly recommend you buy Uline brand tape. Strongest and their tape gun is buttery smooth.
Nice work! Don't forget to remind everyone to check where the studs on the wall are so that your ribs on your mounting clete aren't in the way...:) Learned that one the hard way!
Great project! Yes, please include more electronics!!
Thank you for choosing safety over cinematography. Safety first!
Every day!
I like them. Only thing I would add is a led light strip on the top shelf also pointing up.
The tunes in this video are on point!
This turned out awesome brad!
I like the way you work and explain everything!🎉
You reading my mind man. Have to build some for the bathroom. Thanks for the idea. Just waiting on my track saw to come in. Great job on the shelves.
Thanks, Phil! Track saws are awesome, you're going to love it!
I love the magnetic charging cables. Putting one of those adapters in there would have the connection not have dust and stuff gunk it up as easy. And of course everything is better with magnets. LOVE the shelves. Want to have similar when we finally get into a house not an apartment
I bought a wood shelf, used a router with an quarter inch bit, installed an led rope light and I’d say it looks better than what you have. The leds I use are definitely up to snuff as I have lights in my garage that have been on for over a year with no issues.
great project. I have an idea to make the shelves even better. you should have put a board or two horizontally between the shelves so you could turn the three leds of the shelves on and off with just one button
Man, I love this inception flip :D
What a great build! Thanks for sharing.
AWESOME DIY!!! Thank you for your great teaching!
The edits on this video are great!
I obsses over making my office space as epic and pro level as possible. Videos like this just inspire me to keep trying to take things to the next level. 🤩
Love electronics, I just need a little more step-by-step instructions 👍👍✌
Big big fan of electronics. Really enjoy your channel. Big inspiration for me and future shop/office updates
i honestly was thinking it was going to look wack, but i was wrong, that is hot af . 10/10 will build ty
Your butter comment earned my subscription to your channel. Nice job on the shelves.
Nice Job there Brad!! very slick
Awesome idea!!! Looks so clean. I made my first floating shelf out of scrap 1/4 MDF and on the fly. It is small and is mounted just above my medicine cabinet to put all my meds on. I need to take it down and refinish it and make the support system a little bit sturdier.