Next video on Ignition Tuning is here! Again, if you need advice or have questions or need tuning done, let us know either in the youtube comments or on instagram at: instagram.com/_throttlebuddies/
Is the first time that I see someone build a "home made" stethoscope just to hear the pinging that occurs in a combustion chamber..!! Is a good way to optimice the spark table and not just guessing... regards from Mexico city
absolutely! works great as you can hear. but plenty of people have done it and shown on youtube. though many people use it wrong. it is VERY important to get the placement right, otherwise you will only hear very heavy knock
@throttlebuddies6356 if one is lucky enough to have an engine that came with a knock sensor, its easy to do, but you have to find the right place orherwise
@@Bega309 ne brauchst leider ein standalone. Das wàr sonst ja schön haha Aber auch für solche autos gibts da optionen, kostet aber wegen canbus etc.etwas mehr
Next video on Ignition Tuning is here! Again, if you need advice or have questions or need tuning done, let us know either in the youtube comments or on instagram at: instagram.com/_throttlebuddies/
Is the first time that I see someone build a "home made" stethoscope just to hear the pinging that occurs in a combustion chamber..!! Is a good way to optimice the spark table and not just guessing... regards from Mexico city
absolutely! works great as you can hear. but plenty of people have done it and shown on youtube. though many people use it wrong. it is VERY important to get the placement right, otherwise you will only hear very heavy knock
@throttlebuddies6356 if one is lucky enough to have an engine that came with a knock sensor, its easy to do, but you have to find the right place orherwise
Just used this method to set my ignition timing and some serious side eye went down 😂 thanks for the informative videos!
Haha yeah you get some wierd looks if people notice it 🤣
Thank you, clearly explained
Awesome, thanks!
Good job.
amazing, very cheap and very smart :)
Super Video.! Gruß aus Deutschland (e46 turbo)
Danke, Grüße zurück 😅🙏
kann man die software auch an einem standart steuergerät vom ford focus st mk2 anschließen oder braucht man dafür eine aftermarket ecu`?
@@Bega309 ne brauchst leider ein standalone. Das wàr sonst ja schön haha
Aber auch für solche autos gibts da optionen, kostet aber wegen canbus etc.etwas mehr
lovet he videos man!! We need more off them :) Im asking coz i know u have the mx5 , Can you deepened on the oem knock sensor when tuning?
Have not used a stock knock sensor from an mx5 i know that the bosch sensors work well tho
would boost be lower then 30?
@@Xos_BassHead999 yes, on boost you would reduce timing. Rule of thum to be safe would be reduce timjng by 1 degree every psi of boost you add