BendTech Tube Notching Part 1
Вставка
- Опубліковано 7 жов 2024
- BendTech Tube Notching Part 1 video:
0:11 - 2:00: Setting the Stage
Alright, Kaleb, in this section, they've got all the tube pieces cut, bent, and labeled. They're prepping to start the tube notching process. They're talking about the cutting wrappers printed by the Bentek software, which give you the cut angle, size, and rotation. You'll learn how to use these to notch the tubes accurately. They mention marking the tubes for rotation before bending, but it's all good even if you didn't do that.
2:00 - 4:45: Wrapping and Tracing
They discuss wrapping the cutting wrapper around the tube and lining it up with the outside radius of the nearest bend. They suggest labeling each cutting wrapper for easy reference. They trace the edge of the wrapper onto the tube to guide the notching. It's all about precision, my man.
4:45 - 6:44: Notching Straight Tubes
Here, they're showing how to line up and mark the cutting wrappers for straight tubes. They recommend aligning the line with the seam weld and measure the distances mentioned on the wrapper to set up the notcher accurately.
6:44 - 8:14: Safety Precautions and Setup
Safety first, dude! They're talking about protecting your feet and ankles from hot metal chips. Always use proper safety gear. They demonstrate setting up the tube in the notcher, clamping it securely, and keeping the weld seam on top for easy alignment when flipping.
8:14 - End: Notching Process
They showcase notching a straight tube at a one-degree angle, emphasizing the need for accurate setup to avoid damaging the notcher or the tube.
Key Takeaways:
Cutting wrappers from Bentek software provide the info you need.
Accurate wrapping, tracing, and alignment are crucial.
Label those cutting wrappers to avoid confusion.
Safety gear and awareness of hot metal chips are a must.
Weld seam alignment helps keep everything square.
Proper setup ensures precise notching.
Sounds like you've got a knack for metal fab
Awesome! Getting ready to do my first bend tech wrapper notches! Thanks!
Right on, hope all goes well!