Give Flashmasters a call or check them out here ---> amzn.to/2t23v1F BUT Be sure you order the right computer for your vehicle. We replaced this about 6 months ago. Still working great!
I replaced the throttle body and my car is still doing all these things and after I replaced the throttle body it don’t want to go past 20mlp. Do you think it would be my computer since I already replaced the throttle body?
M y 2006 Chrysler 300 was doing the same thing! IT went on limp mode and had no power and would stall. I ordered the same part from the link you put and just added my vin, got here in a bout a week but now it's back to running how it supposed to! Thank you so much ! And flashmasters was great with shipping, 150$ plus shipping. Would of cost me an arm an leg at the dealership. Thanks for the video!
Instead of wasting any money do this, turn the key to the on position but don't start the vehicle press the gas pedal 5 times really slow so the computer can relearn it on the fith time depress pedal slowly look at the lightning bolt and it will disappear and then test drive your vehicle and it will run like new without having to replace the ECM,guaranteed my friends.
@Louheffna if the light came back on check the throttle body and the maff sensor and push on them making sure they are plugged correctly, if they are loose it can cause the lightning bolt to come on,unplugging the temperature sensor will also cause the lightning bolt to come on so repeat the process after checking these components
I just shut it off and it's gone until the next time it goes in limp mode and it only does it in the mornings once it gets warmed up it's good the rest of the day so I'm lost on what to do. I've seen where ppl have said how to reset it but when I shut the car off and restart it the lightning bolt is gone and I can drive it. Do you have any ideas what this could be?
Just received my ecm today and man this worked perfect, I’ve been struggling to get these lights off for atleast 1 year very fast shipping too would highly recommend to anyone with this problem
Thank you bro I had the same problem, I called the dealership and they told me 1,200 i went to flash masters after looking through autozone Oriellys and rock auto and couldn’t find anything. I saw this video i tried flash masters and my car is back in action the light is off and im satisfied.
For the last few months I have been watching your channel and others trying to build up the nerves to make the decision to do this. Between you, the Hollars, Justin, Better Together, Living Traditions and others...It has really helped me to finally make my next move. I purchased a 10 acre tract in Dent County, MO. I should be heading there within the next month to start new. I Thank you so much for all your content and information you have given. So, I want to thank all of you and the community.
I feel humbled to be in such a list with the other channels you have mentioned. One of the reasons that I started on UA-cam was to help others with information. I am glad that you were able to get 10 acres, you can and will do so much. Welcome to Missouri. Thanks so much for the awesome feedback. Hope to see you sharing your story... Because maybe you will encourage the next person. Good luck and be Blessed my friend.
2007 Chrysler 300 2.7 thanks guy. You is a big help. This is exactly what im gonna do with my car. Buy a new one just like you did and ill be back in a couple of weeks to reply to what i need and did.
Cheers mate, I messed up bought an American P.O.S. and this car has only 61,000 miles. If not for u, I was about to go down that dealership stink hole. Sold it, back to my Mercedes C300 craving from an older gentleman from Pasadena Ca who didn’t drive anymore. 👍👍👍 to you.
Okay so just to help all you people out with the issue that happened with me I had the red lightning bolt flashing and saw this video saying to buy a new computer flash master ECM computer they're almost $200 or you can check the wiring to your crankshaft position sensor and make sure there are no wires that are exposed and touching one another that's what I just found on mine and I just separated the wires and sealed them all off independently and the flashing lightning bolt went away and I didn't have to order the flashmasters computer after all
First of all, I don't have anything to do with the people who made the video or the used computer people. Now that it's clear that I'm not taking anyone's 'Side' here, think about this... The guy making the video is trying to help you. I mean that he is trying to give you a run down of what worked for him without paying dealership prices. The idea that you 'NEED to check out your car' and be sure of what is wrong with it, should go without saying! My God people... If your dang car is tore up than 'Yes' you need to check it out and figure out what is wrong with it! What a concept! Were Any of Ya'll that guy in England who drove into the English Channel because his GPS told him to turn right??? Ya'll Take Care, (and by the way, if you have a flat tire... Check the air pressure before you order New tires!). -John
Just replaced my ECU on my 2008 Caravan with a Flashmasters unit. Send them the old one back. Good Fix, along with a Throttle body clean and replacement pedal accelerator.....Minivan going again with 247K ! The stow n Go Minivan is a hard vehicle to replace as a 2nd errand car...nothing has the room, and it worth it to a point to do these fixes.....
thank you so much for the information. I have a Chrysler 302,006 as well and it just cut off while driving and all the lights came on just like you said and I’ve been hearing it for a while that the engine is sounding just like you described as well. I will be giving this a try.
This is awesome! Thanks for making this video. My son's Chrysler is doing all of these things exactly and he's study Automotive Technology in college and is worried he'd have to spend tons to fix it. We're going to try this out, thanks a ton again!
@@andrewsantana1660 yes! It worked... We replaced the computer component, had to erase codes from his car afterwards. It definitely worked though and his Chrysler is running great now.
I just wanna THANK YOU 4 THIS VIDEO! It Solved my problem/I just received my new ECM Yesterday & now I'm Rolling again after my Chrysler broke down 3weeks ago?/This video WORD 4 WORD is exactly what I experienced& was able to fix myself/ THANK YOU DO MUCH!(P.S I got my ECM plug&play from Flagship one)
@@tonykelly2855 roll the dice my friend, I literally just went on Amazon and ordered it, just make sure it’s the right one for your car/truck then it’s gonna ask to customize so you’re going to have to put your VIN so it’s programmed to your car specifically. Wish me luck lol #letsgobyron
I had all the wiring in my car replace had that computer your talking about programmed and replace and put brand new throttle body in it. Because all light in the whole car where flashing then eventually car would not run..also replaced battery car is fixed now a year later..drove it for two days but the light stays on...not flashing..but car runs great no shaking rpms are at 500.. no sputtering muffler. I also reset it but you drive for like 5 mins light comes back on. Any suggestions?
I was stuck an hour from home in tractor supply driveway and couldn’t figure out what to do watches this and now I’m good to go home thanks man video was very helpful
Just turn your key to the on position don't start the vehicle and press the pedal five times really slow so the computer can relearn it and then test drive your vehicle and it will run like new without having to spend a dime, trust me my friends it works
Hello I just came upon this issue with my daughters 300 hemi, does this fix correct the throttle body as some people have said they think is the problem.
One thing I'd try before replacing is unplug the unit, spray plugs with contact cleaner - maybe WD40 and plug them back in. Dampness could cause corrosion and poor connection through the plugs.
Good Morning, thank you for responding. 2008 touring 3.5v6. 145,000. I had the throttle body replaced its still doing it. I'm concerned about replacing that comment, but it is the original part
I WATCHED YOUR VIDEO AND YOU WOULD BE AMAZED HOW MUCH KNOWLEDGE I GAINED FROM YOU,I HAD NO IDEA THE COMPUTER COULD ALSO BE BAD AND WHERE THE COMPUTER WAS LOCATED AND HOW EASY IT WAS TO REMOVE AND HAVE A NEW ONE INSTALLED AND ALSO WHO SOLD IT.I REMOVE MY THROTTLE BODY AND SPRAYED IT DOWN WITH CARB CLEANER,THE INSIDE WAS SO THICK WITH GREASE,SOME OF MY PROBLEM WENT AWAY BUT I COULD TELL THE CAR WAS NOT COMPLETLY HEALED,THE LIGHTNING BOLT WOULD STILL COME ON THEN GO AWAY SHORTLY,ALSO THE ESP LIGHT.I GUESS MY NEXT STEP IS REPLACING THE COMPUTER,THAT NOT A PROBLEM AFTER WATCHING HOW EASY IT WAS WHEN YOU REPLACE YOURS..HERE IS A 👍TO YOU.I ALMOST FORGOT TO MENTION,MY VEHICLE IS A HEMI C V8 2006 WITH A LITTLE MORE THAN 58,000 MILES ON IT,I DONT DRIVE THE CAR A LOT BUT THAT DOES NOT MEAN THE COMPUTER CANT GO BAD.THANKS A MILLION FOR YOU ADVICE.
Ok well I'm sort of having the same problems I think, only it completely shuts off while I'm on the freeway if I go past 80 to 85, that red light thing comes on and it shuts off I have to pull over turn my car off and put in park and restart it. Then the light goes away and its fine again until I go past 80 again.?? Same problem or no???
I have an 06 dodge charger 3.5 mines does the same thing and the only way to get around it is cutting the car on and off until it kick itself out of limp mode. Thanks I'm going to order this for my car now.
I bought a 06 Dodge Charger SRT8 that keeps stalling out. Had the gas tank replaced, the PCM and throttle body and 2 sets of plugs and coil packs and it still jumps into, I guess its limp mode. Soon as I shut it off the lightning bolt light went out and the ESP and BAS lights went off but the engine light stayed on. You think another PCM would fix that?
But I still have all the codes he is talking about an they have been popping up for almost a year now so I finally jus spent the 169 plus shipping 202 the dealer wants 1895 at the end of the day so I’ll get back to you guys on July 31 32 FARMER MAN GOD BLESS YOU FOR THIS! I appreciate you !
I’m having this same issue with an 06 Magnum. I’ve replaced everything in line from the throttle body to the pedal, everything but the PCM with no luck. I’ll be checking out flash masters.
A possible even simpler fix i found on fixit by felix. Turn the engine to on, let all the daslights go off, push the gas pedal all the way down and slowly let it up, turn the car to off then crank it all the way on. Totally fixed it in 1 minute!! Its called throttle relearning. Amazing!
Replaced computer in 07 Chrysler 300 with reprogrammed one and it started just like yours shut it off and started it again to make sure it was good went inside bout 20min came back out to start and move it and it wouldn't start or crank ???
My car is Chrysler 300 2007 year was doing the same things with your video , had lightning bolt light and shake all time , I want to buy a flash master but I don’t know to tell them details even Amazon hasn’t contact seller
Hello I’m having same issue too on my 05 300 Hemi 5.7 the vehicle stalled out and cuts off while idling the lightning light came on then off engine light stayed on and after checking the code it showing u0100 which is pcm ecm issue.. will this solve it
Cool Info. I had a throttle body code and used carb cleaner to remove the varnish. Didn't have the limp mode code. Is limp mode only 2 cylinders firing?
Question. I have a 2005 Chrysler 300. It acts like it wants to turn over but doesn’t. Is it the starter? I to the relay fuse off, did the paper clip thing to see if it would crank that way and got the same thing. I don’t know what to do…
Thanks brother. I have a 07 Dodge Charger 3.5L and this has been going on for bout a year not. After a new throttle body, coils, spark plugs and damn near everything under the sun that my ODB2 scanner has said has been replaced, except the PCM. Well I sold, if not then you'll hear about a FL man who tried to drive his car into a tree, lol JK. Still it's been a long frustrating battle with this issue. So thanks for the advice.
I have a 2012 dodge charger rt and I've replaced the fuel pump system and all 4 o2 sensors and when I crank it up it hesitates and then fire up do I need a throttle body or one of those computers from Flashmasters
Brother I am using Chrysler 300 year 2007 my car has problem like you show video but I bought new engine’s brain and replaced new but it doesn’t work . I need to set computer or not . I hope you can answer my question thanks a lot
Mines had the same problem when replacing my egr valve , so they had to take apart the intake in order to get to the egr valve when putting it all back together i guess the intake gaskets Was worn out so thats when the lighting bolt light came on , took it back to replace the gasket and it only cost me 40$
Can this also be a problem due to a bad fuel pump. Because my fuel pump stopped working a mechanic made it work for a day next it the light came on. If I do replace the fuel pump will it solve the problem?. Thanks
Just ordered from flash masters I have 2007 300 2.7 that little lightning bolt light comes on and some times it does not want to turn on till the light goes off
I've purchased the ECM for my 04 300 because it wasn't starting anymore. Now I've gotten my car to start again only to have it die right away. Any suggestions?
Thanks for Sharing this video, I dont have this issue in my car but I want to keep my 300 for as long as possible and it might come on handy. When we hear (it might be the computer) we usually imagine spending thousands and thousands of dollars. Great video.
Damm my guy you just saved m3 1400 bucks , yur a legend 👏 thank you for the video , i bought the throttle body amd still appeared, just ordered it, hopefully thats it, but dope video my guy 🎉🎉
So my car was running fine and just shut off while driving. Tried starting it and it's like if the key gets stuck and just putters. Any info would be really appreciated
My car is doing exactly what this video is showing! Same year make& model! Same exact systems! Could you please send me a link or something showing me how to purchase that same computer for that same price? PLEASE 🙏
I’m having the same problem but my 2008 Chrysler 300 touring go into limp mode once I drive it after a while and come to a complete stop and some times it even turns off if I’m in drive still I’m not sure if I need to change that part or the throttle body what’s some signs that’s it’s the throttle body if you have any
Mine sounds like that the exhaust after I took it to a shop to put timing chains. The engine light blinks on and off and And now it’s having shifting problems. But I drive it 200 miles a weeks. And it goes three the gears. Just not like it usually did. And now the esp bas sensor is on and cruise control won’t work now. Do you think it could be my computer?? Thanks
Thank you for the video. Been having trouble out my 06 300 touring computer. Have to keep cranking it so many times and dash board be lighting up just like yours. Be bless.
I have a Chrysler 300 2007 2.7 my lamp is on my dashboard blinking off and on I change my throttle body the car still doing the same thing taking a long time to crank up and backfire putting then cut on I unhook my computer 14 minutes to hook it back up car crank up normal ran for 20 minutes and went back to limp mode on do I need a new computer or
Having the same issue with my dodge avenger 2013 2.4 L After idling in the hot (Texas 🥵) for 30 min starts kicking up the revolutions and showing the boot light briefly Not sure how damaged or dirty is my throttle body but after doing the pedal things with the key on will see tomorrow how it behaves I’ve been feeling the car powerless for a while but still speed up in the road with no issues , the only issue I’ve seen is when idiling parked .
I have a 2006 Chrysler 300 now I'm having a concern about these flashing lights that pops up on the dasher while Im driving it on the freeway or just about 3,5 minutes later driving it. And it happens to this car more often now also the odometer signals will move down to 0 like crazy,while Im speeding to 60 65 Mph. What would it be the issue my car is starting to have?
What if it's because my car isn't in time correctly. The guy who changed my water pump didn't line up the timing right the first time and it's been doing this since. Will changing the computer really fix this issue?
So I'm having the exact problem with my chrystler 300 no check engine lights just hose 2 lights and I replaced the brain "comp" it still doing it I also replaced the throttle body and it's still doing it any suggestions all of this installed professionally
Give Flashmasters a call or check them out here ---> amzn.to/2t23v1F
BUT Be sure you order the right computer for your vehicle. We replaced this about 6 months ago. Still working great!
I replaced the throttle body and my car is still doing all these things and after I replaced the throttle body it don’t want to go past 20mlp. Do you think it would be my computer since I already replaced the throttle body?
My key broke and the car went into safe mode, 06 Chrysler 300,
M y 2006 Chrysler 300 was doing the same thing! IT went on limp mode and had no power and would stall. I ordered the same part from the link you put and just added my vin, got here in a bout a week but now it's back to running how it supposed to! Thank you so much ! And flashmasters was great with shipping, 150$ plus shipping. Would of cost me an arm an leg at the dealership. Thanks for the video!
Jonathan Picon my pedal does not work on 2011 Dodge Charger 3.6
Link don't work replaced my throttle body and still going on limp mode . Gunna try this but can't go on website
Instead of wasting any money do this, turn the key to the on position but don't start the vehicle press the gas pedal 5 times really slow so the computer can relearn it on the fith time depress pedal slowly look at the lightning bolt and it will disappear and then test drive your vehicle and it will run like new without having to replace the ECM,guaranteed my friends.
I’m sitting here damn near depressed ima try it my friend lbs thanks God bless
I tried it, it worked but the next day the light came bacc on
@Louheffna if the light came back on check the throttle body and the maff sensor and push on them making sure they are plugged correctly, if they are loose it can cause the lightning bolt to come on,unplugging the temperature sensor will also cause the lightning bolt to come on so repeat the process after checking these components
I did it at first the sign does come off yeah my still doesn’t crank
I just shut it off and it's gone until the next time it goes in limp mode and it only does it in the mornings once it gets warmed up it's good the rest of the day so I'm lost on what to do. I've seen where ppl have said how to reset it but when I shut the car off and restart it the lightning bolt is gone and I can drive it. Do you have any ideas what this could be?
2007 Chrysler 300
I just ordered one from Flashmasters
$119.95 + free shipping!
I hope this fixes my problem. Thank you!
Did this fix your problem?
Did it work
@@alyssawilliams4954 yes ma’am
@@lifeonthemark 👍🏻 yep
what was your problem? Thanks
Was the closest surprise to see the little mechanic helper, great video
Just received my ecm today and man this worked perfect, I’ve been struggling to get these lights off for atleast 1 year very fast shipping too would highly recommend to anyone with this problem
I'm glad that they helped you out. 👍🏼
Did the solution stick? Thx
Love the fact you had the little man help you. Your a great Dad!
Thanks Kevin
Yeah but he should have been using a torque wrench
Thank you bro I had the same problem, I called the dealership and they told me 1,200 i went to flash masters after looking through autozone Oriellys and rock auto and couldn’t find anything. I saw this video i tried flash masters and my car is back in action the light is off and im satisfied.
That's great. Thanks for the comment 👍
Whats codes did u get
For the last few months I have been watching your channel and others trying to build up the nerves to make the decision to do this. Between you, the Hollars, Justin, Better Together, Living Traditions and others...It has really helped me to finally make my next move. I purchased a 10 acre tract in Dent County, MO. I should be heading there within the next month to start new. I Thank you so much for all your content and information you have given. So, I want to thank all of you and the community.
I feel humbled to be in such a list with the other channels you have mentioned. One of the reasons that I started on UA-cam was to help others with information. I am glad that you were able to get 10 acres, you can and will do so much. Welcome to Missouri. Thanks so much for the awesome feedback. Hope to see you sharing your story... Because maybe you will encourage the next person. Good luck and be Blessed my friend.
2007 Chrysler 300 2.7 thanks guy. You is a big help. This is exactly what im gonna do with my car. Buy a new one just like you did and ill be back in a couple of weeks to reply to what i need and did.
Let me know how it turns out.
Did it work?
Did it work???
Cheers mate, I messed up bought an American P.O.S. and this car has only 61,000 miles.
If not for u, I was about to go down that dealership stink hole.
Sold it, back to my Mercedes C300 craving from an older gentleman from Pasadena Ca who didn’t drive anymore. 👍👍👍 to you.
I'm glad I was able to assist 😃
Okay so just to help all you people out with the issue that happened with me I had the red lightning bolt flashing and saw this video saying to buy a new computer flash master ECM computer they're almost $200 or you can check the wiring to your crankshaft position sensor and make sure there are no wires that are exposed and touching one another that's what I just found on mine and I just separated the wires and sealed them all off independently and the flashing lightning bolt went away and I didn't have to order the flashmasters computer after all
Exactly.. new/used wire harness.. scoping first
First of all, I don't have anything to do with the people who made the video or the used computer people. Now that it's clear that I'm not taking anyone's 'Side' here, think about this... The guy making the video is trying to help you. I mean that he is trying to give you a run down of what worked for him without paying dealership prices.
The idea that you 'NEED to check out your car' and be sure of what is wrong with it, should go without saying! My God people... If your dang car is tore up than 'Yes' you need to check it out and figure out what is wrong with it!
What a concept!
Were Any of Ya'll that guy in England who drove into the English Channel because his GPS told him to turn right???
Ya'll Take Care, (and by the way, if you have a flat tire... Check the air pressure before you order New tires!). -John
How do I find this sensor?
Just replaced my ECU on my 2008 Caravan with a Flashmasters unit. Send them the old one back. Good Fix, along with a Throttle body clean and replacement pedal accelerator.....Minivan going again with 247K ! The stow n Go Minivan is a hard vehicle to replace as a 2nd errand car...nothing has the room, and it worth it to a point to do these fixes.....
thank you so much for the information. I have a Chrysler 302,006 as well and it just cut off while driving and all the lights came on just like you said and I’ve been hearing it for a while that the engine is sounding just like you described as well. I will be giving this a try.
What a horrible place for any electronic module. The cowl.
Brilliant engineering!!!!
It's protected in there, much better than in the engine compartment. A clip and a couple of screws.
This is awesome! Thanks for making this video. My son's Chrysler is doing all of these things exactly and he's study Automotive Technology in college and is worried he'd have to spend tons to fix it. We're going to try this out, thanks a ton again!
You're welcome. I hope it fixes it. Please let me know your results.
Did it work?
@@andrewsantana1660 yes! It worked... We replaced the computer component, had to erase codes from his car afterwards. It definitely worked though and his Chrysler is running great now.
@@souldreams333 did it stall and turn off at redlights what was the first sighns?
@@andrewsantana1660 it kept cutting off when he turned the ignition over and the battery light along with a bolt (⚡) light came on.
I just wanna THANK YOU 4 THIS VIDEO! It Solved my problem/I just received my new ECM Yesterday & now I'm Rolling again after my Chrysler broke down 3weeks ago?/This video WORD 4 WORD is exactly what I experienced& was able to fix myself/ THANK YOU DO MUCH!(P.S I got my ECM plug&play from Flagship one)
Thanks for the feedback. I'm so glad you were able to fix your car without going to a mechanic. That's why I made the video to help people out! 👍
My car is having the same exact issues. I will be contacting Flashmasters.
Thanks for the video.
Thanks for the video, do You have to disconnect the battery for this procedure? Thanks for the advice.
I just fixed my 300 by watching this video.. thank you flash masters.. also thanks a million to the gentlemen who uploaded the video..💪💪💪
This video helped me out didn’t have my car for a month waiting on the part but I’m back on the road now
That's awesome. Did you get it from Flash Masters?
You have no idea how much you helped me out with this
Say my car is doing this right now I just woke up no start I’ve checked it say ECM as the code so if I order this it should work right I hope
@@tonykelly2855 roll the dice my friend, I literally just went on Amazon and ordered it, just make sure it’s the right one for your car/truck then it’s gonna ask to customize so you’re going to have to put your VIN so it’s programmed to your car specifically. Wish me luck lol #letsgobyron
@@BruceWayne-ue5dj any luck?
Thank you sir had this problem on my 2014 Jeep Pariot ..and my husband saw your video and did the same. And it work perfectly...Thank you
Thanks for the response. Glad to help
I had all the wiring in my car replace had that computer your talking about programmed and replace and put brand new throttle body in it. Because all light in the whole car where flashing then eventually car would not run..also replaced battery car is fixed now a year later..drove it for two days but the light stays on...not flashing..but car runs great no shaking rpms are at 500.. no sputtering muffler. I also reset it but you drive for like 5 mins light comes back on. Any suggestions?
I didn't even watch the video but it helped me alot. It made me realize that my farm needed and alarm.
Finally found a video to help me fix the situation. Thanks 👍🏽
Thanks for watching. Hope it helps!
I was stuck an hour from home in tractor supply driveway and couldn’t figure out what to do watches this and now I’m good to go home thanks man video was very helpful
I hope it helps!
Just turn your key to the on position don't start the vehicle and press the pedal five times really slow so the computer can relearn it and then test drive your vehicle and it will run like new without having to spend a dime, trust me my friends it works
Thank you I think it's time to change the computer as I have changed the throttle body twice, ignition coils, spark plugs, injectors 4xs, egr valve 2x
Thank you much for this video. My father-in-law and I have been dealing with this problem on my wife's 300
I sure hope it helps.
Hello I just came upon this issue with my daughters 300 hemi, does this fix correct the throttle body as some people have said they think is the problem.
I appreciate you putting the video up thank you it helps a lot to learn about the vehicle
Would this cause the car to only go 43 mph?
great job and you probably save someone else tons of money too hugsssss from Ontario Canada
One thing I'd try before replacing is unplug the unit, spray plugs with contact cleaner - maybe WD40 and plug them back in. Dampness could cause corrosion and poor connection through the plugs.
Good Morning, thank you for responding. 2008 touring 3.5v6. 145,000. I had the throttle body replaced its still doing it. I'm concerned about replacing that comment, but it is the original part
We replaced the computer, and it worked for us.
I WATCHED YOUR VIDEO AND YOU WOULD BE AMAZED HOW MUCH KNOWLEDGE I GAINED FROM YOU,I HAD NO IDEA THE COMPUTER COULD ALSO BE BAD AND WHERE THE COMPUTER WAS LOCATED AND HOW EASY IT WAS TO REMOVE AND HAVE A NEW ONE INSTALLED AND ALSO WHO SOLD IT.I REMOVE MY THROTTLE BODY AND SPRAYED IT DOWN WITH CARB CLEANER,THE INSIDE WAS SO THICK WITH GREASE,SOME OF MY PROBLEM WENT AWAY BUT I COULD TELL THE CAR WAS NOT COMPLETLY HEALED,THE LIGHTNING BOLT WOULD STILL COME ON THEN GO AWAY SHORTLY,ALSO THE ESP LIGHT.I GUESS MY NEXT STEP IS REPLACING THE COMPUTER,THAT NOT A PROBLEM AFTER WATCHING HOW EASY IT WAS WHEN YOU REPLACE YOURS..HERE IS A 👍TO YOU.I ALMOST FORGOT TO MENTION,MY VEHICLE IS A HEMI C V8 2006 WITH A LITTLE MORE THAN 58,000 MILES ON IT,I DONT DRIVE THE CAR A LOT BUT THAT DOES NOT MEAN THE COMPUTER CANT GO BAD.THANKS A MILLION FOR YOU ADVICE.
Ok well I'm sort of having the same problems I think, only it completely shuts off while I'm on the freeway if I go past 80 to 85, that red light thing comes on and it shuts off I have to pull over turn my car off and put in park and restart it. Then the light goes away and its fine again until I go past 80 again.?? Same problem or no???
I have an 06 dodge charger 3.5 mines does the same thing and the only way to get around it is cutting the car on and off until it kick itself out of limp mode. Thanks I'm going to order this for my car now.
Before u order check your egr tube gasket.. mine was bad caused a leak bought a new for 3 bucks changed it never had a problem again
That’s what I have been doing so far it’s still ok. 2006 300 Hemi
What code did u have
I coded mine awhile back and forgot now have to look again but mine been OK past few nonths again. Will look, keep the reader in my car.
I bought a 06 Dodge Charger SRT8 that keeps stalling out. Had the gas tank replaced, the PCM and throttle body and 2 sets of plugs and coil packs and it still jumps into, I guess its limp mode. Soon as I shut it off the lightning bolt light went out and the ESP and BAS lights went off but the engine light stayed on. You think another PCM would fix that?
Settin' the dealership oppressed free!
LOL
So it’s been a year since you did this video. Any problems with the Flashmaster PCM?
But I still have all the codes he is talking about an they have been popping up for almost a year now so I finally jus spent the 169 plus shipping 202 the dealer wants 1895 at the end of the day so I’ll get back to you guys on July 31 32 FARMER MAN GOD BLESS YOU FOR THIS! I appreciate you !
How’d it work out for you?
If only all engine fixes were as simple as that.......
I’m having this same issue with an 06 Magnum. I’ve replaced everything in line from the throttle body to the pedal, everything but the PCM with no luck. I’ll be checking out flash masters.
Let me know how it turns out!
What codes did u have pop up anddid this fix it
I bought one that wasn't already programmed. How can I get one Programm??? THANKYOU!!!
I have a question after installing the flashmasters pcm do you have any problems whit the key or do u have to program it?
I never had any other issues after installing the pcm I got from Flashmasters. It was plug and play
would this also kill a brand new battery
Did you see those two Gigantic Cougars?
A possible even simpler fix i found on fixit by felix. Turn the engine to on, let all the daslights go off, push the gas pedal all the way down and slowly let it up, turn the car to off then crank it all the way on. Totally fixed it in 1 minute!! Its called throttle relearning. Amazing!
Yea that’s what I’ve had to do too
I did that and it worked! Thank you. Now am I gonna have to do that every time I start my car?
Okay but does it keep the lights on
@@danniewolfe7145 it fixed it the 1st time. U hv to do it exactly like it says. A few months later i had to do it again.
@@dewayneparker6734 no.
Replaced computer in 07 Chrysler 300 with reprogrammed one and it started just like yours shut it off and started it again to make sure it was good went inside bout 20min came back out to start and move it and it wouldn't start or crank ???
My car is Chrysler 300 2007 year was doing the same things with your video , had lightning bolt light and shake all time , I want to buy a flash master but I don’t know to tell them details even Amazon hasn’t contact seller
2:10 Two thieves passed behind you 😂😂
thank you for your video that is the problem that i was having with my 300 good video
I hope I was able to help
Hello I’m having same issue too on my 05 300 Hemi 5.7 the vehicle stalled out and cuts off while idling the lightning light came on then off engine light stayed on and after checking the code it showing u0100 which is pcm ecm issue.. will this solve it
Cool Info. I had a throttle body code and used carb cleaner to remove the varnish. Didn't have the limp mode code. Is limp mode only 2 cylinders firing?
So will flashmasters help my 2012 charger rt from hesitating when I crank it up
I am going to attempt to try this myself hope it works🤞🏽
Did the light stop coming on?
My car is having the same exact problems. This video was very helpful. Thank you!!
Glad to help!
Question. I have a 2005 Chrysler 300. It acts like it wants to turn over but doesn’t. Is it the starter? I to the relay fuse off, did the paper clip thing to see if it would crank that way and got the same thing. I don’t know what to do…
did it still run before you replaced the computer? Mine just wouldn’t go over 35mph
This just happened to my car. What computer should I be looking for? I did this same thing for another computer fir my car. Thank you for your help.
Good info. Glad I checked out your video! Good thing you had your "master mechanic" help you get everything put back together! lol
Thanks brother. I have a 07 Dodge Charger 3.5L and this has been going on for bout a year not. After a new throttle body, coils, spark plugs and damn near everything under the sun that my ODB2 scanner has said has been replaced, except the PCM. Well I sold, if not then you'll hear about a FL man who tried to drive his car into a tree, lol JK. Still it's been a long frustrating battle with this issue. So thanks for the advice.
Having this problem on mines what’s the number to flashmaster
I have a 2012 dodge charger rt and I've replaced the fuel pump system and all 4 o2 sensors and when I crank it up it hesitates and then fire up do I need a throttle body or one of those computers from Flashmasters
Brother I am using Chrysler 300 year 2007 my car has problem like you show video but I bought new engine’s brain and replaced new but it doesn’t work . I need to set computer or not . I hope you can answer my question thanks a lot
Mines had the same problem when replacing my egr valve , so they had to take apart the intake in order to get to the egr valve when putting it all back together i guess the intake gaskets Was worn out so thats when the lighting bolt light came on , took it back to replace the gasket and it only cost me 40$
Me and you are in the very same situation bro it started happening after I replaced my EGR 💀🤣
Can this also be a problem due to a bad fuel pump. Because my fuel pump stopped working a mechanic made it work for a day next it the light came on. If I do replace the fuel pump will it solve the problem?. Thanks
Is this the same process for a Chrysler 300?
So mine will lose pressure if ac is turned on and does the lights u showed. Would or could that still be the issue?
I have 300 limp mode issue while watching live data at the APP senor the voltage drops intermittent you think the app is bad or the ecu
Exact problem im having and my stereo goes in and out i was wondering if that has anything to do with computer issue??
Just ordered from flash masters
I have 2007 300 2.7 that little lightning bolt light comes on and some times it does not want to turn on till the light goes off
I've purchased the ECM for my 04 300 because it wasn't starting anymore. Now I've gotten my car to start again only to have it die right away. Any suggestions?
Thanks for Sharing this video, I dont have this issue in my car but I want to keep my 300 for as long as possible and it might come on handy. When we hear (it might be the computer) we usually imagine spending thousands and thousands of dollars. Great video.
Damm my guy you just saved m3 1400 bucks , yur a legend 👏 thank you for the video , i bought the throttle body amd still appeared, just ordered it, hopefully thats it, but dope video my guy 🎉🎉
When this happened to my dodge ram , I cleaned the tb and that made it all go away. It was sticking from carbon buildup
I have 2006 dodge magnum do you 🤔 think this will fix
So my car was running fine and just shut off while driving. Tried starting it and it's like if the key gets stuck and just putters. Any info would be really appreciated
My car is doing exactly what this video is showing! Same year make& model! Same exact systems! Could you please send me a link or something showing me how to purchase that same computer for that same price? PLEASE 🙏
Just call the company we talked about in the video
My 2006 Chrysler 300 Has The Throttle Body Light On ONLY Not The ESP.. I Changed The Throttle Body Do You Think It’s The Module.? It sounds like crap
Runs like crap and it only lets us go about 20-35 miles per hour.
Question did your car turn off and won’t start. Let it sit then it starts back up. ,and then repeats again with same issues?
No
Damn😲! That's a lot of money you saved there. Moreover, you had a ton of fun doing it by yourself with the help of your little one (at 2:47) 😄.
So did you replace throttle body also or just computer?
Just the computer
I’m having the same problem but my 2008 Chrysler 300 touring go into limp mode once I drive it after a while and come to a complete stop and some times it even turns off if I’m in drive still I’m not sure if I need to change that part or the throttle body what’s some signs that’s it’s the throttle body if you have any
Mine sounds like that the exhaust after I took it to a shop to put timing chains. The engine light blinks on and off and And now it’s having shifting problems. But I drive it 200 miles a weeks. And it goes three the gears. Just not like it usually did. And now the esp bas sensor is on and cruise control won’t work now. Do you think it could be my computer?? Thanks
Thank you for the video. Been having trouble out my 06 300 touring computer. Have to keep cranking it so many times and dash board be lighting up just like yours. Be bless.
You're welcome. Glad to help. God bless
I have a Chrysler 300 2007 2.7 my lamp is on my dashboard blinking off and on I change my throttle body the car still doing the same thing taking a long time to crank up and backfire putting then cut on I unhook my computer 14 minutes to hook it back up car crank up normal ran for 20 minutes and went back to limp mode on do I need a new computer or
I have a 2007 Chrysler 300 it only goes like 35 and it has a code of it says not communication with the TCM
Do you think my steering angle sensor should be replaced before I replace the computer?
Mechanic said it was my pcm so we bought a plug and play and put that on and still having those same problems. So it could be my throttle body??
I have a 2007 crysler 300 2.7 my car was doing the same thing I bought it from flashmasters but it’s still the same
I don’t know what to do anymore
Having the same issue with my dodge avenger 2013 2.4 L
After idling in the hot (Texas 🥵) for 30 min starts kicking up the revolutions and showing the boot light briefly
Not sure how damaged or dirty is my throttle body but after doing the pedal things with the key on will see tomorrow how it behaves
I’ve been feeling the car powerless for a while but still speed up in the road with no issues , the only issue I’ve seen is when idiling parked .
Would this stop the lights from blinking
I have a 2006 Chrysler 300 now I'm having a concern about these flashing lights that pops up on the dasher while Im driving it on the freeway or just about 3,5 minutes later driving it. And it happens to this car more often now also the odometer signals will move down to 0 like crazy,while Im speeding to 60 65 Mph. What would it be the issue my car is starting to have?
If you figured it out I’d sure love some help having this issue right now
What if it's because my car isn't in time correctly. The guy who changed my water pump didn't line up the timing right the first time and it's been doing this since. Will changing the computer really fix this issue?
It seems like if there was a timing issue then there still is a timing issue. and that is the issue that needs fixed
Thanks brothers I have the light on. Where should I buy that computer?
How has the reprogrammed unit holding up
We eventually sold the car. But the ecm held up just fine for the time we had it.
So I'm having the exact problem with my chrystler 300 no check engine lights just hose 2 lights and I replaced the brain "comp" it still doing it I also replaced the throttle body and it's still doing it any suggestions all of this installed professionally
brother I have this problem with my 300 3.5 09, would I have to do the same thing that you did bro?
Could you help me :(