I bought this unit and did not get the clip and carbon brush to allow the unit to give the ability to use the turntable for Welding. I've contacted vevor about this and am getting the runaround. They said it's a consumable they drop $60 off, and I then needed to find the brush and clip. I said no way either send the part or give me a return label and a full refund. I wouldn't have any idea where to buy the part and I'm assuming by there reply they don't offer replacement parts rendering it worthless in time. Bad business practice.
Yeah, but I don't follow THEM. AND they're not mad gingers, and may not be willing to take requests, like welding up an arse-kicking barbecue to go with that ice cream truck hot rod!😂
Interesting tool, I could see it being very useful . Good job at critiquing the product. On the lighter side brother, in this day and age no one cares which way you “run”. 😂😂. Thanks for the post. 👍👍🇨🇦
If you have ANY old dc arc , you essentially have a tig welder already!! Save ya money and just get some leads from the people who throw or sell the factory tig pieces to upgrade to CK FLEEEEEXXX stuff. Coz that bright lead makes you Insta good .. never forget that !!
I bought one of these and I have to pump the pedal just like this guy is doing and get it to rotate a little at a time. It won’t turn slow enough to leave it on and weld continuously. You have to tap the pedal, you can hear him doing the same thing but he didn’t mention that at all. I was disappointed that it won’t keep a slow enough speed.
It's a spinning fixture. If you need it to go slower you can swap out the motor. Pumping it works fine. You can get all sorts of different speed motors for under $20
Welding Tig , and mig requires different speeds. He is welding small diameter material, but if you step up to the table size, it may not go slow enough for Tig. If it does go slow enough, due to the speed controller my be jumpy at slow speed. Be sure to check all specs on postioner,s, as they vary.
I got the vevor turntable, and I hooked up my ground. I started mig welding and heard some sputtering. Now I can't get a ground connection to the turntable. I'm assuming how they ground from the ground attachment fried. The motor is fine.
Good luck if it doesn't function on arrival ! I bought the 30 kg version and didn't rotate from the get go . After flicking emails back and forth for two weeks , they decided it would be fair of them to give me a partial refund and let me keep the non working piece of crap instead of sending me one that does work , and returning the one that doesn't.
I had a gear break on my slip roller from Vevor, it did take some back and forth for sure but they did send the parts. I'm sorry they didn't make it right. You are rightfully upset.
That would definitely come in handy... Question does it lock on a speed or do you have to hold pedal down? Thinking of other uses for it. Painting for one. Nice video looking forward to header build.
What is the highest amps you have gone? I am tig welding 1” pipe for rv drains and looking to speed up the process. I currently am welding them at about 160amps. Do you think this unit would handle that?
Great vid, thx for this ! Would this be ok to use MIG welding at 250amps ? Need to weld a 0.213" thick pipe to a 3/8 plate. I know it is rated at 80amps but are wondering if it could handle this.
You put in the time make videos, edit them, post them, moderate them. All for no income. When someone offers you something for “free” you make the call. In the meantime keep your comments friendly.
Love a machine that can't make up it's mind. Another great one
Thanks for checking it out!
Out of all the overseas product's I have purchased, Vevor has been the best in price and build. As always I liked and shared. All my very best.
This thing seems to be on point for the price.
Might have to buy one now, thats pretty slick
It works well for the cost. We will report back on it after using it for a while.
A welding positioner that goes both ways. Doubles its chances for a hot Saturday night.
Damn right! She's taking someone home!
Looking forward to the headers on the shoe box . 👍🏻💯⛽️🇦🇺.
I'm hoping to get back on the Shoebox next week. We are finishing 2 others videos currently. Some cool other stuff coming up!
Thanks for sharing that with us.
Thank you for watching it!
I bought this unit and did not get the clip and carbon brush to allow the unit to give the ability to use the turntable for Welding. I've contacted vevor about this and am getting the runaround. They said it's a consumable they drop $60 off, and I then needed to find the brush and clip. I said no way either send the part or give me a return label and a full refund. I wouldn't have any idea where to buy the part and I'm assuming by there reply they don't offer replacement parts rendering it worthless in time. Bad business practice.
Sorry to hear that
You can't help this guys out?@@madgingercustoms
Good video! How about a basic how-to for that Tig welding?
I'm not a professional welder but I can get by with it. There are some really good how to tig videos from guys way better at it than me!!
Yeah, but I don't follow THEM. AND they're not mad gingers, and may not be willing to take requests, like welding up an arse-kicking barbecue to go with that ice cream truck hot rod!😂
@@liamrobinson2084 what type of BBQ are we talking? I'll fire up the plasma table!
Interesting tool, I could see it being very useful . Good job at critiquing the product. On the lighter side brother, in this day and age no one cares which way you “run”. 😂😂. Thanks for the post. 👍👍🇨🇦
She identifies as bi directional! Lol.
If you have ANY
old dc arc , you essentially have a tig welder already!!
Save ya money and just get some leads from the people who throw or sell the factory tig pieces to upgrade to CK FLEEEEEXXX stuff.
Coz that bright lead makes you Insta good .. never forget that !!
Roger that!
Roger that!
I bought one of these and I have to pump the pedal just like this guy is doing and get it to rotate a little at a time. It won’t turn slow enough to leave it on and weld continuously. You have to tap the pedal, you can hear him doing the same thing but he didn’t mention that at all.
I was disappointed that it won’t keep a slow enough speed.
It's a spinning fixture. If you need it to go slower you can swap out the motor. Pumping it works fine. You can get all sorts of different speed motors for under $20
Welding Tig , and mig requires different speeds. He is welding small diameter material, but if you step up to the table size, it may not go slow enough for Tig. If it does go slow enough, due to the speed controller my be jumpy at slow speed. Be sure to check all specs on postioner,s, as they vary.
You can change out these motors easily. I should do a quick video on that.
@@madgingercustoms the motor/controllers are the first to fail.
Good review.
Thank you!
Great vid!
Thank you!
great review!
Thanks and thanks for checking it out!
I got the vevor turntable, and I hooked up my ground. I started mig welding and heard some sputtering. Now I can't get a ground connection to the turntable. I'm assuming how they ground from the ground attachment fried. The motor is fine.
You can adjust the ground pin from what I see. This isn't rated for high amps though.
Good luck if it doesn't function on arrival !
I bought the 30 kg version and didn't rotate from the get go .
After flicking emails back and forth for two weeks , they decided it would be fair of them to give me a partial refund and let me keep the non working piece of crap instead of sending me one that does work , and returning the one that doesn't.
I had a gear break on my slip roller from Vevor, it did take some back and forth for sure but they did send the parts. I'm sorry they didn't make it right. You are rightfully upset.
That would definitely come in handy... Question does it lock on a speed or do you have to hold pedal down?
Thinking of other uses for it. Painting for one.
Nice video looking forward to header build.
The pedal is momentary. You need to hold it down.
I bought a generic one of these identical. Pedal was click on, click off.
Speed controller on the box set rotation.
Ordered one! Thanks for the code! And the video!
What is the highest amps you have gone? I am tig welding 1” pipe for rv drains and looking to speed up the process. I currently am welding them at about 160amps. Do you think this unit would handle that?
No, I don't think this would work up that high.
Great vid, thx for this ! Would this be ok to use MIG welding at 250amps ? Need to weld a 0.213" thick pipe to a 3/8 plate. I know it is rated at 80amps but are wondering if it could handle this.
I don't think I'd try to run 250 amps through it. They do make a larger version.
@@madgingercustoms wow thats a fast reply ! Thanks man Im gonna look into bigger models.
Hi, is it hollow in the center for purging?
Yes, I believe it is!
For 219 this would be well worth it
I'd think so.
now you can add an arm to hold your tig torch and automate it haha. just dab the rod while the welding is being done for you
I like it!!! Lol
If you can get through the guy saying “right” every other word, it’s ok I guess
Right.
Another sell out.
@sorryyouarewrong known Dave 30 years… you sir are wrong
Yeah completely. Lol
You put in the time make videos, edit them, post them, moderate them. All for no income.
When someone offers you something for “free” you make the call.
In the meantime keep your comments friendly.
I got a carbon brush. Would you be willing to send me some pictures of the clip so I could make it if I give you my email address?
Email me at madgingercustoms@gmail.com