DIY Welding Turn Table Positioner Battery Powered
Вставка
- Опубліковано 25 січ 2020
- Plans to my projects
madebythemetalist.etsy.com
New Video Sheet roller: • How to build a DIY She...
My Welding Table: • Welding Table Build wi...
My Sheet Metal Bender Video: • DIY Sheet Metal Bender...
In this Video i build a battery powered Welding table, it works with a 18volt battery. The Batteryplug on the side is a 18v Lamp. The Motor is a 24volt windshield wiper Motor. The Gearwheels are from an old lathe and the Control regulation is a PWM-Control (About 10-15€ in eBay or Amazon). Please mind that i don't Show any cabeling in this Video, you shouldn't do any thing of this if you are not to 100% sure what you're doing!!!
I Tig Brazed everything to gave my Turntable a industial look, with the holes in the Bottom I'm able to screw it to my Weldingtable to secure it.
This is not a step by step Explanation Video and i build everything with my personal skills. - Навчання та стиль
That moment when you hit "Like" before the video even starts, because you already know it's good 💪
All your builds are incredibly inspiring! Keep up the amazing builds.
Thank you 😊
@@TheMetalist hi can you give me cad drawing file of this?
Chuck's a smooth operator who seems to have a thing for being tiggled.
Straight forward and simple! Love it! Thanks for sharing and keep up the great work!
Thank you 😊
Ohh man - It's time for us all to pick the pace - That was awesome, thanks ;)
Thank you 😁
You should somehow prevent the welding current from flowing through the bearings. The copper band inside the housing is supposed to do just that. However, it should be spring loaded because the copper will eventually, quite soon actually, stop making a decent contact with the shaft as it looses the original tension.
Being battery operated is a great idea !
Thank you 😊 to spring loaded the copper band its a great idea 💪🏻👍🏻
Nice work I especially like the battery powered wiper motor
I’ll have to look into that
I just powered a bead roller with one and am thinking of a sheet metal roller powered the same way
Than depending on how they last was thinking of powering a tube bender/roller
Incredibly inspiring. Lots of great tips and style hidden in this build. I’m going to add this to my list of build projects now. 👍😊👍. Thank you for recording and sharing ! Joel.....
Thank you Joel 😁
Excellent!. It is truly a gift to be able to build things and a luxury to have the time and energy to do so. When we have these characteristics, we must remember not to ever take them for granted. Thumbs up!.
Thank you 😊
You are like Poetry in motion and a pleasure to watch Great Video as per usual Thankyou.
Thank you 😁
Great work man. Great time lapse photography etc. Love the 'get right to it format' with no talking about crap for 20 minutes. I will build your table and maybe this rotator. Definitely inspired and I have subscribed. WHere did you get the 3 finger chuck? Same old lathe the gears come from? Thank you sir.
Thank you 😁 des from that old lath
Very satisfying watching you build things.
Thank you 😁
I just recently started welding and although I still suck I really enjoy it. Your videos are inspirational! Fantastic job!!!
Your workshop is amazingly professional. Be blessed
Thanks man 😁
Sehr sehr cool! Kommt auf die Liste der Dinge, die ich noch bauen muss! 😎🤙🏻
Watching this dude's channel has me ordering a Lincoln 200 tig welder. Should be here soon. 😁
Another awesome build and video thanks for sharing love your work👍😀inspired to try building my own 🙏
Thank you 😁 it is actully my third welding table that i build. I allways improved it 😅
Brilliant idea , I'd like to make one , looks light enough & safer than the old mercury grease filled ones , well done good job
Thank you 😊
Excellent build, very innovative.
Thanks for sharing.
Thank you 😁 you are welcome
Pulse for tacking, looks great.
You got a very good hand at tig welding and fabrication skill. I am trying to build up my home shop to get more welding jobs in the smalltown in TN. looking for shop tools for metalwork. I would love to get my hands a turntable and a few other shop items. Been retired from the aerospace industry as a precision welder. I enjoy watching your videos keep it up. Thanks
Thank you 😁 nice Aerospace 😮 my main job is in a rollercoaster company and i do a lot of side hustle welding job 😁 and finally i take my time to build everything that i always wanted to build 😁
The brass fill rod was a nice touch !
Thank you 😁
Yes, I was inspired and already collected some artifacts, but I will do it on 220v. But according to your design. Cool video
Thats nice to hear 😁 thank you
@@TheMetalist
👍
Hey @6061 you're inspiring other channels! Love the OG
Sie sind ein wahrer Könner und Meister. Toll.
Dankeschön sowas hört man gerne 😅👍🏻
Well, i didn't know that i needed this but i sure do need it!
one of the coolest builds I've seen!
Thank you 😁
Fabrication genius !
Excelente idea 👍💡. Saludos desde Argentina 🇦🇷
Awesome video and build. Thanks for sharing
Thank you 😊
favorite fabricator to watch hands down 🙌🏼 love the way you build, as well as edit. also I'm curious, what kind of taps do you use? are they a specific brand or anything?
Pretty awesome man , your channel came across my suggestions list. Subscribed 👍
Thank you 😁
Dobra robota 👍 negatywa dali ci co sami potrafią tylko wyszczać dziurę w śniegu 😊
Thank you 🙂
What a great design! Well done my friend...
Thank you 😁
Parabéns, top top top...... onde você comprou essa régua com suporte ajustável ? Obrigado
Wow. Nice job on this!
Thank you 😁
Awesome job quality work and great video no hype just all quality workmanship..just subscribed
Wow That's real trick, Very nice job guy!
Thank you 😁
Great vid mate and love ur mag drill set up 👍👍
Thank you 😊
Świetna robota!!!
That was awesome!
Very nice work, Great video, thanks for sharing
Smart setup!
This isn't just a person who makes or fabricates things. This is a person who engineers things. This is all highly fascinating. This newly discovered channel has my mind thinking about few projects I've had in mind.
Nice 💪👍
Awesome build.. 👍🏽🇺🇸👍🏽
I'm building one of these currently. Wish I knew those all in one speed controllers with the direction switch existed. Would've saved a lot of time, but I've learnt a bit about electronics doing it the way I have. My rotating chuck is being made out of s/s so drilling & filing out a square hole is a chore.
The gears are cool too. I used a motor bike chain & sprocket in hindsight the gears would be the way to go.
Watched this video 2 weeks too late, but saying that. If I run in to reliability issues, I can change the set up similar to yours.
Nice ... learning by doing same like me 😅
Thank you for that nice Feedback 😁
@@TheMetalist keep up the good work! Watched a few videos now. I wish I could keep my work space as clean as you do.
I am cleaning a lot in between 😅
just subscribed, awesome and inspiring, keep your projects coming!
Thank you 😁 i will
Brilliant mate ...absolutely brilliant skill set🧠
Thank you 😁
Super Arbeit! Ganz toll 😊
Dankeschön 😁
Top notch work!
Thank you 😁
Nice build, man!
Thank you 😊
Полезное приспособление. Всех благ.
Really nice. Great work.
Thank you 😁
Fantastic build:)
Thank you 😊
I need one for my garage!
😁
Dude, this is great! Thanks so much for sharing this! This will be perfect for me and I can't wait to get started.
Thank you 😊 send me some pictures if you are finished 😁
Nicely done.
Thank you 😊
Absolutely amazing my man wish I could get this good one day ha
😁💪
Amazing idea!
Thank you 😊
Excelentes te felicito videos y disculpa de cuantos amperes y voltios estu máquina mig de soldar?
Thank you 😊
Rehm Tiger AC/DC Digital 230AMP
Your excellent craftsmanship must be shared with the rest of us eager to achieve greatness but without plans, *measurement, approximately only* and what kind of motor and wiring diagrams (most welders don't know much about electronics) it would take painstaking hours that most of us don't have, only to end up frustrated. Be a team player and post your diagrams. I'm willing to donate for your effort as sure as others will. It's worth it. Thanks in Advance, an admirer. Phoenix One.
It would be cool to have a parts an electric controls break down UA-cam some where .
Lord knows, I'm not the guy for that job.
Just Love It!
Thank you 😁
Great work
Thank you 😊
Freaking awesome!
Thank you 😁
Great job😃👍
Thank you 😊
Very good
Congrats!!
Thank you 😁
this is awesome!
Thank you 😁
Awesome video. What do you use to draw grid lines on your table?
Somebody get this man a fucking 🥇. This dude is a genius.
😅Thank you 😁
Great job, I wonder given the slightly golden color of the welds if you have used silicon bronze as a tig
-rod. I understand that there is no benefit and it is just an increase in costs. But from the color that can be an optical effect this idea comes to me. In case I thought it was for purely aesthetic purposes giving a line close to INDUSTRIAL STYLE or STEAMPUNK?
..... looking at it well, it seems to me it could be an optical effect due to the warm light and perhaps also to the reach of argon.
O cara é fera.
You’re my hero.
Oh ok 😅
Thank you 😁
Bravo!
Sehr inspirierendes Video. Werd ich definitiv Nachbauen. Welche Zahnrad größe nimmt man für sowas am besten? Welche hast du dafür genommen?
Very neat!
Thank you 😁
Chapeau..Prachtig.. UItmuntend stielmanschap !! Louis.
Good job mate 👍
Thanks John 😊
Good job 👍👍👍
Thank you 😊
Great build. I wish I had seen this before making my own years ago, would saved me a lot of headaches
Thank you 😊 i planned a couple weeks befor and battery powered was a last minute desicion 😁
@@TheMetalist yeah that was really smart. I used a cordless drill to drive a gearbox. Now I'm gonna have to make a new... one thanks a lot hahaha
Make a Video maybe than i have to build a new one 😅
Great Job! Sub added!
Just stumbled onto your channel. Instant sub bro.
Thank you 😊
New subscriber! Thanks for your amazing content. Quick question: What is that adjustable ruler that you use to mark off of called? Looks super handy!
Thank you 🙂
Measuring gauge!
Hi @The Metalist, what brand/model is that adjustable edge ruler/scriber? (4:21) I love your engineering on the fly method of building, it's inspiring.
I would like to purchase one aswell.
Does anyone know if he made it?
Same here, tried googling "lockable ruler" etc. Nothing.
AMAZING
Mad skills. Your layout work is amazing. Just like your welding and creativity. Video editing too?
Thank you 😁
What a fantastic build! Great craftsmanship, design, and production. Creativity is truly alive here. Thanks!
Thank you 😊
😃This guy is good! 👏👏😃👍
Thank you 😁
Imprecionante parabéns 👏👏 y
Thank you 😊
Muy bueno.
Do the battery's run dead flat if left on or will it power off before so it wont be pron to empty battery damage
Cool AF!!
Awesome build man did you use silicon bronze on those joints ? it really looks incredible;)
Is there a worry of fringe the electrical and battery when you are wielding? Because I know when we get our trucks welded on it is a good practice to disconnect the battery before welding
5:51 Sure would have been nice to have the welding positioner to weld the piece on the welding positioner , but hence the welding positioner was not done yet LOL
Brilliant....
Thank you 😁
Gefällt mir!!!
Glaub ich 😊 bring ihn dir vorbei 😉
We have the same feeling guys ;) I love your work. Your vids give me many inspiration
Thank you 😁
You are number one !!!!
Thank you 😊
Fai dei progetti incredibili....una domanda che saldatrice a tig hai? E come ti trovi?
ایول احسنت خیلی عالی👌👌