Wow loved the build, you did a brilliant job. I have mad.a.couple on Ade's wig wags but have only run them on compressed air. I shall have to follow your example and inspiration to try and make.one one.with a.steam boiler. Great job 😀
That milling technique that starts at about 4:50 is pretty cool. I’ll file that in my keep in mind file in the ole thinkin cap. I love watching how folks figure out ways to accomplish things in machining. Nice work!!
Part way through video . Two points of interest .# 1. When making the piston rod end it is usual to do all work before removing small bits from bar stock . # 2 at about 6.48 i am sure your ream holes will not be straight as i can see deflection with your reamer
First thanks for watching :) Each product is a primary prototype. # 1 Sometimes there are design and manufacturing updates while manufacturing. # 2 The holes were accurate enough for the engine to work properly. In the end the engine worked well and I am very pleased with the result. You have a sharp and professional eye! I would love to receive a review from you in the following videos. Thank you :))
Great respect from you Dennis. I really enjoyed designing and building the engine. I can tell you that boiler production was more complex than the engine.
I would like to build a small steam turbine that has 3 kilowatts of electrical power. Great would be a power plant for home in an emergency, where you can use any heat source to produce steam and from it electrical energy. Unfortunately I do not know how realistic and how much work this is.
Help! Great engine and boiler. I have built many small steam engines but run them on air. I followed your video to make a boiler, I have a bulldog gun that is advertised as even being able to do brass brazing. I am using 1.5mm 55% silver rod. I just can't seem to get the solder running even when red hot. It runs on small jobs but not something the size of this boiler.If you have time, could you give any advice and tell me the solder you use please? many thanks
Thank you watching. I am using Silver Solder Brazing: www.amazon.com/gp/product/B0713Y6V2F/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 and Silv Brazing Flux : www.amazon.com/gp/product/B005ENPK6W/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 The steam boiler is very challenging to manufacture. good luck :)
NICE! Question Is the aluminum cylinder and brass piston good for a lasting engine? I don't want cast-iron sleeves, but is that the only thing that lasts long term that you know of?
@@YooProjects You make some really good stuff and this is certainly one of them, without that safety valve the boiler is at risk of explosion if left for long enough!
@@YooProjects Thanks for the reply, I am planing to buy a lathe for hobby puposes, i have no lathe experience. There are few other brands with same specs as proxxon 400, much cheaper, from china or similar, can’t decide if its worth the pay the difference. I am pretty sure proxxon is more precise and etc. but still can’t decide…
@@YooProjects That isnt a substitute for a safety valve. you can get ready made ones fairly cheaply on the internet. I know its only small but youll be surprised how much it hurts you or someone else when it goes wrong
Wow an amazing project 😍 !! .... Friend I need a lathe😓😅
Thank you bro 🍻 I like your hand made projects 🤩
@@YooProjects De Boa
Thank you 🤩
😅 k
@@YooProjects
3:30 3:42
A build video where the music is pleasant guitar instead of eardrum destroying EDM? How novel!
Thank you very much for watching 👍
Wow loved the build, you did a brilliant job. I have mad.a.couple on Ade's wig wags but have only run them on compressed air. I shall have to follow your example and inspiration to try and make.one one.with a.steam boiler. Great job 😀
Thank you very much! The boiler was the challenging part of the this project. You mast use silver soldering for the steam boiler. Good luck 👍
Woooooow man! What a project ! How much precision hand work, Thomas Savery is proud. Keep’em coming please.
Thank you very much bro. Pleasure to receive many compliments. It gives me back wind to keep going. 🤩
Lovely project.
Thank you for watching 🙏 New project in the oven
This is awesome.... I didn't know that someone can build such things at home...
You very special talent my friend!!!
Thank you very much my friend . I really appreciate 🙏🤗
Very nice job.Well done.
That's
That milling technique that starts at about 4:50 is pretty cool. I’ll file that in my keep in mind file in the ole thinkin cap. I love watching how folks figure out ways to accomplish things in machining. Nice work!!
I agree with you. It's a simple technique that does a great job. Recommended for those who don't have milling machine.
Thanks for posting this video it really helps!!!😊
My pleasure 🙏 Thanks for watching 🌻
Amazing project! Cant wait to your next projects.
Thank you darling 💜
Part way through video . Two points of interest .# 1. When making the piston rod end it is usual to do all work before removing small bits from bar stock . # 2 at about 6.48 i am sure your ream holes will not be straight as i can see deflection with your reamer
First thanks for watching :)
Each product is a primary prototype.
# 1 Sometimes there are design and manufacturing updates while manufacturing.
# 2 The holes were accurate enough for the engine to work properly. In the end the engine worked well and I am very pleased with the result.
You have a sharp and professional eye! I would love to receive a review from you in the following videos. Thank you :))
Yoo Projects i finally got time to watch the rest of the video a unusual way to make a boiler but it all works well.Cheers Dennis
Great respect from you Dennis. I really enjoyed designing and building the engine. I can tell you that boiler production was more complex than the engine.
Modifikasi ini tidak simpel ❤ susah di pelajari alur energi Nya ❤ ilmu yang lain yang mudah dan ramah masih banyak❤
Very cool...nice work!
Thank you very much :))
Nice work. 👍
Thank you very much for watching 👍💫👍
Hello! Many congratulations on the project!!! Is it possible to have a plan with the dimensions of the pieces? Very grateful in advance! Greetings!
Thanks for watching my video. Search for wigwag engine on youtube. You will find bigger engine plans without steam boiler. Have a great day 👍
@@YooProjects Thank you very much for your reply! Good luck and stay in touch! Greetings!
Wow cool really ingenious idea🥰
Thank you darling ❤️
עבודה יפה כל הכבוד ! Well done
Thank you bro 👍
Very nice, I love it!
boil an egg with the steam.
Thank you. I really appreciate it.
Very nice, but the walnut base would be more stable with the grain direction the long way.
Thanks a lot :) Definitely an interesting point.
great project...nicely filmed...do you have drawings?
Thank you Professor. You can fine great drawing and descriptionon ade Swash channel.
ua-cam.com/video/-F0HeOM8mK0/v-deo.html
Brilliant idea! love it
Thank you so much 😊
Excellent Yoo, very much enjoyed the video and the project :)
Thank you dear man for challenging me. Is it possible to add the engine to the wig wag family? 😁
I would like to build a small steam turbine that has 3 kilowatts of electrical power. Great would be a power plant for home in an emergency, where you can use any heat source to produce steam and from it electrical energy. Unfortunately I do not know how realistic and how much work this is.
Wow.. Very interesting idea 👍 its sound very challenging project.
Nmskar sir
Where is the description? I still can not find the blue print.
I can't even imagine what you will next.
The imagination takes me to these places 😊
That was amazing! Thanks for sharing
Thank you very much for watching ❤️
Awesome work!
Thank you bro 🤩🙏
Excellent work, is that silver solder on the boiler. Thanks
Thank you very much 😊 Yes, its silver solder on the boiler
Very nice little engine, but why, oh why, do you not show some measurements?
Thank you very much bro.
Send me a mail I will send you size (mm)
yooprojects1@gmail.com
Help! Great engine and boiler. I have built many small steam engines but run them on air. I followed your video to make a boiler, I have a bulldog gun that is advertised as even being able to do brass brazing. I am using 1.5mm 55% silver rod. I just can't seem to get the solder running even when red hot. It runs on small jobs but not something the size of this boiler.If you have time, could you give any advice and tell me the solder you use please? many thanks
Thank you watching.
I am using Silver Solder Brazing:
www.amazon.com/gp/product/B0713Y6V2F/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
and Silv Brazing Flux :
www.amazon.com/gp/product/B005ENPK6W/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
The steam boiler is very challenging to manufacture. good luck :)
many thanks, I will try that solder
😅 I thought parting off with a live center in was bad and dangerous...
Thanks for watching sir. It's working good so I like this method.
I Would like to build one. Where can we find the blueprint for it?
You can find it in the description. Thanks for watching 👍
very successful, it's splendid👏👏👏 I would like to make the 3d model on catia, would it be possible to have the plans please?
Thank you very much 👍
yooprojects1@gmail.com
Send me email please..
NICE!
Question Is the aluminum cylinder and brass piston good for a lasting engine? I don't want cast-iron sleeves, but is that the only thing that lasts long term that you know of?
This engine is not designed for continuous operation. But the morden engine design from aluminum.
Thanks for watching 👍👍💫
Does anybody else hear a faint 50hz hum in the background of still shots?
What solid boring bar were you using
I used reamer on this project.
What lock tight or glue was used?
Hi, Thank you for watching 🤩. I used Locktit 638
what program are you using for CAD simulation?
I used fusion 360 or solidworks.
Thank you for watching 💫
Can you generate 5-10 W electric power with such engine?
Its a interesting question. I didnt try it and i don't have answer for it. Thanks for watching:)
Needs a saftey valve, look it up, make a simple design. NOT safe to use without one and is illegal in the UK
Ok dear friend. Thanks for watching my prototype steam engine 🙏
@@YooProjects You make some really good stuff and this is certainly one of them, without that safety valve the boiler is at risk of explosion if left for long enough!
@@vatonix84yes it’s literally a bomb if you leave it
hello, new subscriber here :)
Are you using proxxon lathe? 250 or 400? also proxxon vertical drill?
Thank you…
Hello friend,
I have proxxon pd 400. Very nice lathe. Thanks for watching my video, I hope you enjoyed it 🤩🌻⚙️🔩
@@YooProjects Thanks for the reply, I am planing to buy a lathe for hobby puposes, i have no lathe experience. There are few other brands with same specs as proxxon 400, much cheaper, from china or similar, can’t decide if its worth the pay the difference. I am pretty sure proxxon is more precise and etc. but still can’t decide…
You can find Emco lathe on ebay. The old manufacture much better.
Anyone know I can get plans with dimensions?
You can get biger size on wig wag engine. Try to find on you tube.
Mesin uap ya keren kakak salam kenal
Thank you very much
No safety valve....putting my fingers in my ears.........😵
What software did you use at 0:18?
Solidworks
What is the name of the machine? Please answer me 🙏🙏🙏
Proxxon mf 70. Thank you for watching 👍💫
@@YooProjects thanks 😄🙏🙏
Prooxxon does make some pretty nice little metal lathes and milling machines.
True. The main use of the devices is for hobbyists and small models
😅
whats that app in 0:14?
Solidwork, Cad software.
@@YooProjects thanks < 3
I hate to say this, but a soft soldered boiler with no safety valve is very dangerous. Otherwise, it looks very nice.
Thanks for the concern🙏 ..
I used hard soldered, silver type . And there is a small curved tube for safety pressure.
@@YooProjects That isnt a substitute for a safety valve. you can get ready made ones fairly cheaply on the internet. I know its only small but youll be surprised how much it hurts you or someone else when it goes wrong
פרוייקט לא פשוט בכלל!! כל הכבוד לך!!
עם איזו מחרטה אתה משתמש?
Thank you:) The lathe from Proxxon
send me the plans of the machine please in 0:22
Yooprojects1@gmail.com
Plz put it on a "tank"
एक हमें खरीदना है क्या हमें भेज सकते हैं जितना पैसा लगेगा हम भेज देंगे
Sorry, its not for sale. Thank you for watching 🙏
Can’t believe the comments for building a simple engine my cat could make one .
im not interested in the computer designed parts that you make
It's for free.. Thank you for watching my video 👍😁🎁
You never part off using a center
Right. Its effective method for me
Soldering is not your talent :/
I am learning all the time. Thank you very much for watching 👍
Hasn’t a clue what he’s doing .