Fully Enclosed Badland Winch Install on Utility Trailer…..Keeping it out of the weather

Installing a 9500lb ‪@harborfreight‬ Badland Winch. Customer wanted everything in the dry to keep it out of the weather. We also added some lights just in case its used at night.
Harbor Freight Badland Winch 9500lb: www.harborfreight.com/automot...
Harbor Freight Utility Trailer Tongue Box: www.harborfreight.com/2-34-cu...
Burgin’s Garage Instagram : burgins_gar...
#utilitytrailer #welding #fabrication #winch #homemade #cncplasma #tools #diy #harborfreight #harborfreighttools #badlandwinch #carhauler #racecars #racecar #racing #builtnotbought #modified #carmods #trucks #diesel

[@marinescott7790]

I would never say you did a good job on this, but a GREAT job! Very professionally fabricated too!

[@lostinspace280]

That cutter sure cuts the channel Iron well. The install is very professional done. I am going to do something similar to my trailer that I use to haul my Motorcar, railroad (speeder) 1969 Fairmont.
I am going to build the winch/box platform and bolt it to the trailer frame using U bolts. I have always felt welding to a frame can cause hard spots which can cause the frame to crack, especially the tung area. also it will be much easier to re-mount on to another trailer in the future if need be.
IF you are going to weld to tung, I would sugest Skip welding.

[@reezy78]

Damn fine work sir 👍🏾

[@greenup78]

Very Nice!

[@nibbzs15]

Those lights was a very very good touch! 👍

[@phildoleebowitz5335]

Very nice, clean work and wiring is very nice. I will have to do this to mine. Thanks

[@youcanthide004]

What an amazing build. Nicely done.

[@jamesdepaul3410]

Solid job.

[@CSltz]

You did it exactly how I would have. What would you charge to do another?

[@SkeletorJenkins]

Looks nice.

[@brentburnett7778]

You did a great job the fabrication particular is nuts you did a great job I’m going to try to replicate mine might not be as half as nice as yours great job

[@burgingarage]

Thanks. 👍

[@Turningwrenches85]

Nice work brother 👍 🔧

[@burgingarage]

Thanks 👍

[@FixinCat]

I notice most people put “power disconnect” switches rather than “battery disconnect” on the ground side, That would cut power from the positive cable entirely.

[@raystone9059]

Where did you get the board from?

[@LSwon99]

Can I ask what brand lights did you go with. I like the flush mounted setup. looks good!

[@burgingarage]

The customer bought the flush mount ones from rural king

[@anthonywillis3190]

'promo sm' 😌