Відео

How are supposed to keep water out Goober?

Great job!

Nice Job looks great

I was thinking it might be a good idea to weld the nuts underneath to prevent theft of the box assembly. Cool project!

What a great idea installing everything in the box! Have a link to the lights or the brand? Thanks!

any chance you can send me the plans for this set up since you are no longer making it? i would like to do this and you are the only one with info please let me know thank you

Where did you get that muffler cover? Mine isn't a diggit but it sitts right under the radiator and my machine gets very hot within about 30 minutes of running it.

Did you make a kit to add attachments? You got an AliExpress link to find an Auger with plate that works with this machine? What does this kit do- make it easier to operate?

Now this is a professional install! Very nice craftsmanship. Can i ask how many hours you had in it?

nice work!

Very cool project!!!

Now that is a very very nice winch toolbox that you fabricated, its very well put together.

Can I buy your kit?

Where did you find this kit??

If u ever need more clearance check out "elevator bolts"

New sub. Those welds looked mint.

Nice job, but do you think everyone would have such gadgets to make all this?

I did this to my trailer, it’s a great place for wasps and bugs. I scraped that idea and now just have a 2” receiver mount and a winch that I carry in the box. It can also be used on the back of my trucks.

What type of plasma cutter is that and whats pricing for one ?

I just bought a used scag turf tiger 52 with kohler 22ch. Old engine was damaged rebuilt previous owner said, bought the predator engine and already had the 1”-1-1/8” adapter for the shaft. I’m sure I can hook up the wiring but do you have any issues with it charging ?

Where did you get the board from?

Very Nice!

You did it exactly how I would have. What would you charge to do another?

Damn fine work sir 👍🏾

Very nice, clean work and wiring is very nice. I will have to do this to mine. Thanks

What is the total cost for all hoses and valves?

where do I find the valve?

Can that pin fall out if the engine is still together? Someone had messed with mine and it ramps up real high and I can't seem to get the RPMs to come down no matter which way. I adjust that this is a 13 horse Kohler on a Craftsman Rider which is probably in the 2000s

How do I purchase this kit?

I have never seen that happen before

I notice most people put “power disconnect” switches rather than “battery disconnect” on the ground side, That would cut power from the positive cable entirely.

How do I get a kit

Looks nice.

Can you tell me how you wired it up?

Where did you get the plans for your cnc table?

What a strange table. I love it! Did you build it yourself? I love how you can side-load it super easy with the way it's built. Never seen a table that's meant to be up against a wall like that before. Really innovative.

Nice simple tutorial. 2 things: those are called shackles, not brackets. Also if you use Sheetcam (yes it's extra software to purchase but it's not very expensive), it will do the kerf measurements for you. Its G-Code generator is also the most reliable generator I've ever used.

Did the same thing ua-cam.com/users/shortsoJBvaYtCe_Y?feature=share

👍🏻

Hi! When will you have these back in stock?

Can I buy a post hole auger for the scl850

My JD 25 command, aluminum intake still, had a problem with it. Start getting into thick brush and instead of just giving itself a little too compensate, it floors itself which RPMs shoot up for a sec, then let's off, still under load so it shoots back up 🤦🏻‍♂️. Back and forth the whole time I'm in tall grass but under little load it's fine

I have the urge to do this and if it is slightly underpowered throw a draft through carb turbo setup on it

What was the engine doing when the gov pin fell out? I have the same issue as others mentioned below. I've set the gov numerous times per the service manual. It will start and idle but if I get to half throttle the rpms will take off too high. Decreasing the throttle brings it back down but it will never settle at higher RPM. I'm starting to think something internal but would like to hear more before ripping motor out. Thanks

What an amazing build. Nicely done.

How did you take it out

Can I ask what brand lights did you go with. I like the flush mounted setup. looks good!

Can you please send me the info to buy this kit. Could really use it.

Engineered failure points.

You did a great job the fabrication particular is nuts you did a great job I’m going to try to replicate mine might not be as half as nice as yours great job