also the loudest ever, seriously you can hear this shit even with headphones on and its only good at 3/4 or full blast Also with modern day laptops that already have a good cooler design it only drops temps by like maybe 10c, part of that is that the way cpu and gpu boost works now.The more thermal headroom they have the higher they will clock, the only way to really make them run cooler is limit the power they use with intel extreme power tuning software or throttle stop, undervolting doesn't do much for the newer chips because of the reasons i said. Im sending mine back because i just cant take the noise its so annoying, especailly when you take your headphones off and realize what you put other people through that you live with, even if i was single and lived alone i wouldn't keep it...at almost 80db thats only 15db off from a lawn mower
@@Amp_Edition you should first change thermal paste something PTM7950, then use this one as needed. You wont have to go full-blast then. meanwhile I use AI which needs CPU to go hard. That's when I turn it up.
Great Perfromance but man the noise 😓. If only company with great performing fans but quite like noctua & be quite Made a Coolingpad it would be great.
Its physically impossible to have airflow in a laptop without the noise. A fan for a case is usually oriented towards high air flow, whereas here you need a high static pressure fan. If you put something in front of those fans like a filter or a radiator, they will be very ineffective, that is why the other cooling pads with fans that aren't made for high static pressure don't perform as well as the gt500 or gt600.
I just got my gt 600 and damn that noise is insane yeah. But I also had a Coorel pad, and the GT 600 ran 8 degrees cooler on a 1000rpm fanspeed then the Coorel @ max speed. @ a 1000rpm. The noiselevels were close. So it runs slot cooler then a standard cooling pad imo. I ran the Cyberpunk benchmark on a msi stealth 16 ai (4090 and an ultra 9)of 4k raytracing overdrive(with pathtracing) with dlss on auto.
A thought on this, I just purchased a GT 600 that I'm using now. As far as the filters are concerned, the finer filter precedes the coarser one in the airflow, as delivered. This doesn't make too much sense to me, as anything that passes the first filter, is likely to pass the 2nd. I just swapped them around. The alternative configuration makes more sense. If there is a reasonable explanation for fine > coarse, let me know!
Awesome cooler, the help to cooldown my laptop is just a plus for me as the main reason for getting this design is to minimize the dust going in. Good investment overall to give my laptop a bit more lifespan.
Very much appreciate the amount of work you put in on this video and all the testing. Q on the AIDA 64 bar graph for the GT600V2 at 50% speed at 8:02 minutes. The avg temp cannot exceed the max temp. Suspect that the 84 is a typo and should say 74. What do you think?
His channel has a few months old video testing the Llano against the GT500 and a bunch of other cooling pads. The Llano won in the tests using an old Asus and a mid-range Victus. The GT500 won in the tests using a high-end Asus Strix laptop.
Bro .. there is also a GT600 V2 .. If figured I found the perfect one with that one, but just saw a review of a guy comparing the regular 600 to the llano or whatever and the llano performed better. GT600 caught up if you elevated it for some reason (maybe it was more efficient in sucking in air when elevated). I also saw others complain that the llano was much louder and less effective. So I can't pick lol
I just purchased the Alienware X16 R2 which is suppose to have pretty good cooling from the factory or at least i hope! Which would you recommend i buy for that laptop? Great videos by the way, I'll be viewing a few of them today!
Great video thank you for sharing this video. I have question about “Allow Chill” cooling pad that is direct compatible for both GT 600 and Llano. If you can compare all 3 cooling pads, it will be so much appreciated 🙏
I bought it and it arrived on September 10th, but then on the 9th I had a quick power outage while it was plugged on but not in use. The day after, the fan wouldn't turn. Let me tell you how disappointed I am that my cooler only lasted one week...
I want the best one, so, this model or the Llano? also, these actually just push air, right? there is not an AC build in that push actually cold air, right?
just by making the closed designee and adding the foam the entire scene of laptops coolers just changed and anything else without this designee is worthless simply cant compete without the seal and the dust filter is cherry on the top
The only issue inhave with the iets gt500 us8ng my 17.3 inch rog strix is that even with all the other rings of foam removed it seems like the opening is still a bit too small as the foam does cut off the edges of the intake vents.
I've heard that the klim everest runs much quieter than the gt500v2, gt600 and llano - could you decibel match all them 4 coolers to the level of the quietest one to see which one is the best at the same decibel level?
Yo, was loading into game today, when my display cut out. My pc was still on, but the monitor wasn't showing anything as if PC went to sleep mode. I restarted it and when starting up it made 5 beeps (CPU problem in my case) and just didn't show display on my monitor. I disassembled the pc, took off the cooling and took out the CPU to see if it had any burns on it, it was completely fine but the only thing I noticed the 2 pins on the motherboard slot were slightly bent. I thought it was fine, put the CPU back in and installed the cooling. Trying to boot up pc it doesn't even beep anymore, only fans are spinning and RGB working, even powerbutton isn't glowing tho.
@@arctic_void thank you man, Ive actually tried everything but the ram, it all looks to be in perfect condition, gonna try moving the ram around once I'm back from work
Its on Amazon and in the video Gt600 reaches 1600 rpm and doesn't have USB extra ports nor RGB Gt600 V1 Hub reaches 2800 rpm, has USB ports, no RGB Gt600 V2 Hub the same as V1 but with RGB
@@mattscomputerservices perfect! Thank you for the fast reply i’ve ordered both the laptop and the iets gt 600v1 and they’re both arriving on the same day hah!😊can’t wait.
How much noise would you say the llano makes? I was hopping to add a cooler that overall lowers my noise level (office environment) but still gives a few degress of cooling.
I doubt that your router needs anything this powerful, likely a really basic cooler would do, this one wouldn't hurt but its likely overkill even if the router is overheating.
@@djsky2k8 at 1200rpm of llano, you can use GT600 at 1700rpm and GT600 will do the better job for sure! I just would say GT600 is cooler at the same noise level.
The Greatest Coolingpad That's Ever Lived.
also the loudest ever, seriously you can hear this shit even with headphones on and its only good at 3/4 or full blast Also with modern day laptops that already have a good cooler design it only drops temps by like maybe 10c, part of that is that the way cpu and gpu boost works now.The more thermal headroom they have the higher they will clock, the only way to really make them run cooler is limit the power they use with intel extreme power tuning software or throttle stop, undervolting doesn't do much for the newer chips because of the reasons i said. Im sending mine back because i just cant take the noise its so annoying, especailly when you take your headphones off and realize what you put other people through that you live with, even if i was single and lived alone i wouldn't keep it...at almost 80db thats only 15db off from a lawn mower
Reference to that shorts tech channel
Greatest technician that ever lived
@@Amp_Edition you should first change thermal paste something PTM7950, then use this one as needed. You wont have to go full-blast then. meanwhile I use AI which needs CPU to go hard. That's when I turn it up.
I have the GT500 and these are by far the best Laptop coolers on the market!! Very satisfied with mine.
Dude noise level should be measured with the laptop on the pad. Have you ever heard about physics department, called acoustic?
Thanks to noise canceling 😞
Great Perfromance but man the noise 😓. If only company with great performing fans but quite like noctua & be quite Made a Coolingpad it would be great.
But it's for a laptop's and laptop's sounds like a plane when they run something heavy usually. especially my laptop :(
Its physically impossible to have airflow in a laptop without the noise. A fan for a case is usually oriented towards high air flow, whereas here you need a high static pressure fan.
If you put something in front of those fans like a filter or a radiator, they will be very ineffective, that is why the other cooling pads with fans that aren't made for high static pressure don't perform as well as the gt500 or gt600.
I'm using headset anyway so it doesn't bother me much
I just got my gt 600 and damn that noise is insane yeah.
But I also had a Coorel pad, and the GT 600 ran 8 degrees cooler on a 1000rpm fanspeed then the Coorel @ max speed.
@ a 1000rpm. The noiselevels were close. So it runs slot cooler then a standard cooling pad imo.
I ran the Cyberpunk benchmark on a msi stealth 16 ai (4090 and an ultra 9)of 4k raytracing overdrive(with pathtracing) with dlss on auto.
You need to sort your bar graphs so we can see in order, best to worst performance.
Valuable information! Thank you, Matt!
Glad it was helpful!
You did temps at 50% fan speed, would have loved a noise chart at 50% for these coolers.
Honestly thought we had added it let me see if I can share it another way. Sorry about the confusion
also you forgot to mention how many dbs the noise dropped for the gt500 running at 50% rpm, which would be very useful :) @@mattscomputerservices
actually all the benchmarking for gt500 at 50% rpm would be nice too 😄@@mattscomputerservices
A thought on this, I just purchased a GT 600 that I'm using now. As far as the filters are concerned, the finer filter precedes the coarser one in the airflow, as delivered. This doesn't make too much sense to me, as anything that passes the first filter, is likely to pass the 2nd. I just swapped them around. The alternative configuration makes more sense. If there is a reasonable explanation for fine > coarse, let me know!
Awesome cooler, the help to cooldown my laptop is just a plus for me as the main reason for getting this design is to minimize the dust going in. Good investment overall to give my laptop a bit more lifespan.
Great comparison and presentation. Short but precise! thank you, it's really helpful before buying one! 😁
It would ad some great ambient audio for a flight simulator game.
I thought that was a cooking stove at the first place.
Very much appreciate the amount of work you put in on this video and all the testing. Q on the AIDA 64 bar graph for the GT600V2 at 50% speed at 8:02 minutes. The avg temp cannot exceed the max temp. Suspect that the 84 is a typo and should say 74. What do you think?
Thoughts on the Llano? I know it's more on the expensive side, but would love to see a comparison between the 2
His channel has a few months old video testing the Llano against the GT500 and a bunch of other cooling pads. The Llano won in the tests using an old Asus and a mid-range Victus. The GT500 won in the tests using a high-end Asus Strix laptop.
Bro .. there is also a GT600 V2 .. If figured I found the perfect one with that one, but just saw a review of a guy comparing the regular 600 to the llano or whatever and the llano performed better. GT600 caught up if you elevated it for some reason (maybe it was more efficient in sucking in air when elevated). I also saw others complain that the llano was much louder and less effective. So I can't pick lol
I'm using GT600 v2 since last year. Even better than GT500. Bigger fan, Digital touch fan speed control and led. Paid 80 bucks.
hoooly that was way louder than i expected
How can i turn off the beeping when you change fan speeds? Is there a way to silence the buttons?
I just purchased the Alienware X16 R2 which is suppose to have pretty good cooling from the factory or at least i hope! Which would you recommend i buy for that laptop?
Great videos by the way, I'll be viewing a few of them today!
Probably the IETS GT600 or Llano for a laptop like that
@mattscomputerservices Appreciate it! Will grab whichever is priced the best. I did order it with the 4090 so I do want something good.
Very informative. The bar charts -- what does orange mean and what does grey mean? High temp and low temp?
maybe if you looked down, you can see its clearly labelled CPU and GPU
Great video thank you for sharing this video. I have question about “Allow Chill” cooling pad that is direct compatible for both GT 600 and Llano. If you can compare all 3 cooling pads, it will be so much appreciated 🙏
Haven’t heard of that one I’ll see if I can find it
Dam those cooling pads look huge 😂
I bought it and it arrived on September 10th, but then on the 9th I had a quick power outage while it was plugged on but not in use. The day after, the fan wouldn't turn. Let me tell you how disappointed I am that my cooler only lasted one week...
Oh that's sad :(
I want the best one, so, this model or the Llano? also, these actually just push air, right? there is not an AC build in that push actually cold air, right?
These suck air straight from the vents, hence the airtight design with the foam around it. Iirc the gt600 is the better one overall
just by making the closed designee and adding the foam the entire scene of laptops coolers just changed and anything else without this designee is worthless simply cant compete without the seal and the dust filter is cherry on the top
Awesome I’m going with iets gt600 v2
Is it safe to use that? Can it cause damage to the fans due to the pressure?
i also wonder reverse current produced by big fan
@@jackalturk6491 I didn't find anything spcific🥲 but i think it wont be a huge problem.
Why wouldn't you check how much it cools in games
Can u suggest best with better temps and less noise
Yeah I'm hoping for some good ones with less noise too. I really wanted one of them but that noise is a deal breaker for me.
The only issue inhave with the iets gt500 us8ng my 17.3 inch rog strix is that even with all the other rings of foam removed it seems like the opening is still a bit too small as the foam does cut off the edges of the intake vents.
what if your laptop has rear I/Oand power inputs? this looks like it will interfere with connections. no?
I've heard that the klim everest runs much quieter than the gt500v2, gt600 and llano - could you decibel match all them 4 coolers to the level of the quietest one to see which one is the best at the same decibel level?
Agreed! Noise vs cooling performance chart is important. Like gamersNexus does.
Yo, was loading into game today, when my display cut out. My pc was still on, but the monitor wasn't showing anything as if PC went to sleep mode. I restarted it and when starting up it made 5 beeps (CPU problem in my case) and just didn't show display on my monitor. I disassembled the pc, took off the cooling and took out the CPU to see if it had any burns on it, it was completely fine but the only thing I noticed the 2 pins on the motherboard slot were slightly bent. I thought it was fine, put the CPU back in and installed the cooling. Trying to boot up pc it doesn't even beep anymore, only fans are spinning and RGB working, even powerbutton isn't glowing tho.
so what does that mean? does it have anything to do with the IETS 600?
@@efrenrs7647 just seeing if this guy has any advice, considering he has a channel on building PCs
@@prizrak636reseat the RAM a couple times and check every connection. Try all RAM configurations as well. Troubleshooting is hard, godspeed sir.
@@arctic_void thank you man, Ive actually tried everything but the ram, it all looks to be in perfect condition, gonna try moving the ram around once I'm back from work
What is that non-slip table pad?
That bar graph was awful
What's the difference between the gt600 and gt600v2? I can't find the v2 gt600 online anywhere
Its on Amazon and in the video
Gt600 reaches 1600 rpm and doesn't have USB extra ports nor RGB
Gt600 V1 Hub reaches 2800 rpm, has USB ports, no RGB
Gt600 V2 Hub the same as V1 but with RGB
It also on v2 has like Llano a led color control.
It also goes to 2800 rpm.
Does anyone know, if this USB panel is turned on all the time, while fans are working in GT600? Or maybe this counter turns off after a while?
Do you think it will help a lot for a asus tuf f15 rtx 4070
Yes It would be a great fit for your gaming laptop!
@@mattscomputerservices perfect! Thank you for the fast reply i’ve ordered both the laptop and the iets gt 600v1 and they’re both arriving on the same day hah!😊can’t wait.
Bro studied masters in talk no jutsu
What is the lowest RPM this cooler can go at? Llano has 300 minimum, is it the same for GT600?
its 400
is this good for the asus rog g16?
How to turn your laptop into a desktop, those things are huge.
Found it -- grey = GPU; orange = CPU.
Sorry for the confusion there!
Can the laptop power it?
This cooler draws power from the AC adapter that it comes with.
i have a gt500.. without a doubt.. the BEST cooling pad ever !! brilliant video by the way :)
Llano is better, and llano rgb is coolest. 😂 dont mind the noise because 300rpm to 500rpm is good enough to cool my alienware m18 r2 4090 and i9.😅
How much noise would you say the llano makes? I was hopping to add a cooler that overall lowers my noise level (office environment) but still gives a few degress of cooling.
does the IETS GT600 V0 has RGB or atleast a led light?
no
I got gt300 I wonder how much better 500 and 600 are from it.
Leave your laptop off. No noise and no heat
I am a manufacturer of laptop cooling pads and stands, a supplier of Lenovo HP
outstanding compression, will you recommend getting this pad for my ASUS ROG Rapture GT-AX6000 Gaming Router ? thanks
I doubt that your router needs anything this powerful, likely a really basic cooler would do, this one wouldn't hurt but its likely overkill even if the router is overheating.
@@mattscomputerservices ty
Candace Cliffs
7894 Kilback Crossroad
Corwin Circles
Why didn't you show how they work? All that talking...
would this work with a Macbook Pro M2? It has vents that goes out the top, not the bottom. Wasn't sure if this would be good at all.
No
Robb Path
sooo, basically. Just buy gt500 v2 XD
Hi but, can you use these coolers on gaming laptop rog strix g15 and thank you
❤
Kassulke Keys
use headphone while gaming who cares about the noisee
Wrong, the best laptop cooler is the new Llano! Way more efficient than these ones!
last
Sounds like a vacuum
Llano is overall better and cheaper.
Build quality though and noise are its main downfall
@@mattscomputerservices But the noise level of the iets GT600 is not lower than that of the llano
also more noisier at the same performance
@@JR.JimRoss only by 4 decibels, the llano works best at 1200 RPM anyway so no need to max fans
@@djsky2k8 at 1200rpm of llano, you can use GT600 at 1700rpm and GT600 will do the better job for sure! I just would say GT600 is cooler at the same noise level.
Jackson Linda Davis Gary Perez Mary
Fan noise is terrible. I would never buy this.
91981 Muller Spur