Mickey Mouse man, what a lovely sound. Really beats everyone running milteks or AWE. Very unique sound for the engine you have and setup you’ve done. Love it.
Man, thank you so much for this video! Now finally I love how my car sounds, after so many attempts to get that 2.0 to sound beefy. Did same setup but in reverse order (tube resonator already was installed so I didn't want to cut it). Good stuff!
Links GET A DISCOUNT BCM FLOW MASTER EXHAUST 10 amzn.to/3y1sKwj GET A DISCOUNT BCM HIGH FLOW EPA EMISSIONS HIGH FLOW CATALYST amzn.to/3kahNn9 GET A DISCOUNT BCM HIGH FLOW RESONATOR amzn.to/2WaFofD
@@brucecustommotors for now it sounds good but still had that little raspy sound and whenever I’m on lower rpm the nose is little too loud so putting on the high flo and the two res will bring those down without making the car too quiet ?
I deleted my mid pipe and cat then had to change fueling in transient speed. There was no extra lag . I have stock muffler and second muffler, car sounds amazing and the best part is all the crackles and bangs , especially during 2 step
Hey Bruce, this video keeps popping up in my suggestions. And rightfully so! Lol The sounds you have in the beginning is intoxicating and never gets old. You mentioned In this video of another A4/5 2.0T with a Flowmaster Super 10 set up. Could you post the link?
yeah, im running an actual 3 inch in/4inch out exhaust from dc on my jetta 2.0t and it straight sounds just like the 2.5 i5 just like yours, especially at higher rpms...i was debating getting the slower 2.5 passat i saw on the lot the same time i got my jetta 2.0t, but since you can actually get a similar sound out of the 2.0, the sluggish 2.5 n/a engine is basically pointless, but yeah, sounds just like the 2.5...great setup to say the least..most vw 2.0ts, and audi 2.0t's sounding like straight rice..
@@brucecustommotors no prob bro! I'm currently working on my b7 A4 Im doin a wide body kit, rebuilding the 3.2 V6 with some performance apr valve springs, new valves, pistons, new exhaust, and a new tune! Also doing air suspension! And thanks bro I'll definitely ask for some information on some of the stuff I'm doing!
Thank yo so much for this video. I love the sound. What Hi flow cat are you using and with this setup are you able to pass emissions bc I would love to use this but I want to be able to pass emissions where I live as well. Thanks
Hey Bruce will that test pipe fit on a 2014 Audi A6 2.0 tfsi? Or what would you recommend? I'm doing this build with my son so any information would greatly be appreciated or what do you think about me knocking out the baffles in the cat could that work
So for the b9 a4. So I just keep a hfc at the turbo then 3 inch non resonated downpipe to the Flowmaster then two resonators? Do you get any drone from this?
Love the build man!. Trying to rebuild this in the UK but I can't get hold of the high flow cat so my question is will any 2 inch high flow catalytic converter work? Also with the flow master 10 will the single exit Muffler sound the same as this? Many thanks
@brucecustommotors no worries at all bud it sounds awesome. But will any high flow catalytic converter work as I can't get the same one as yours as I've got the rest of the exhaust but can't get the same cat as you have
@@brucecustommotors I have it straight pipped from front rezzy but still got stock cat and flex pipe and stock res but has a custom Y pipe where the mid was
I will end up doing the same setup but would it be a big problem if I just install a high flow Cat where the Oreginal one go? or I have to do it at the specific place?
I don’t have a dang clue about exhaust. I’m starting to get into cars though. I owned this a5 2014 for 3 years and only been dreaming of doing this stuff. Imma try my best to follow you. Also, is there anyway to get 300hp without water methanol injectors or is that a must?
Hey what’s up bro, no reason I started off with the down pipe with out the cat , and just did the placement there, at the time they were out of stock. , one of my friends have the set up with it 2 in one, and it feels about the same
Hey, i absolutely love the sound! I have a 2.0 turbo Camaro that i wanna try and make sound like that. I know i wont get that big V8 sound, but man you blew that out the water! Amazing sound! What size are your glasspack resonators?
Looking to replicate this on my a5 2.0 tfsi, do you get much drone? The blackhorse-racing resonators are out of stock, is there another brand you recommend?
@@brucecustommotors thanks, much appreciated! I have the 2.0 tfsi gen 3 and am having a hard time finding a downpipe so think i’ll have to get a custom built. Do you get much drone with yours?
@@S433D786 Yes i done a 3” from the cat onto the flowmaster 10 (3” in & dual 2.5” out) which then split in to a dual 2.5” all the way back which had a small resonator on each exit. Much louder and sounds aggressive but sadly couldn’t enjoy the sound as wayyy too much drone. It sounds different than Bruces exhaust clips but does sound good and got a lot of compliments though! I have since replaced the resonators with a 7x4 silencer on each side, reduced the drone abit but also reduced the exhaust sound. Looking into ways to reduce drone more or change the set up though.
Great job! Sounds absolutely insane, sounds like it’s gonna kill me lmao. Looking to do a similar set up. I have a question: If I keep the stock down pipe do I need a high flow cat or know? And if I keep the down pipe stock, should I remove the stock res? And then put the flowmaster on in place of the middle M, then just straight pipe it all the way to the end? Or will that need end res as well. With your setup you have everything so it’s super loud, I just won’t have the downpipe and with the first portion of the question, the high flow cat.
Yes definitely, I honestly love armytrix but the price vs the sound , was a bit to high, it wasn’t deep enough for me, and I didn’t want to ad anything to an already expensive exhaust
Hey Bruce, I recently got a Cts test pipe on my a4 b9, CEL popped up as expected. Do you think placing a universal cat where the resonator is will make the cel go away? My setup currently is a Cts test pipe, stock resonators on, muffler delete, stock tune. I would like the same setup as yours thts why I’m asking. Thank you.
@@brucecustommotors The question I was going to ask. Much more affordable and greater sounding 2.0. No need to get rid of my cat less for emissions and to get a 2.5 sound out of a 4banger….. Yessir! So glad I haven’t wasted money on a exhaust and waited.
I appreciate it Bruce but I also have to ask did you let the shop figure out what pipe fixtures would work on the setup or did you order those as well just curious I’m about to get my exhaust setup exactly like yours because it sounds perfect
Hey Bruce, love the videos ! Can you pleeeease tell me where I can get a dual exhaust diffuser for a 2010 Audi a4 B8 ? I think I would freaking find Waldo before one of these. Please help if you can. Thanks in advance. I have ordered all the parts for the exhaust set up that you have here only missing a dual diffuser.
Hey man, I'm unable to get the dark horse resonators as they aren't available, would the Vibrant Performance 1794 bottle style resonator work just the same? Cheers in advance?
@@brucecustommotors my amp stopped working, not sure what it is. The fuses are all good but I gotta figure out why I’m not getting power to the amp or if it’s broken. Also the fuse I was tapped into for my remote wire was for the fuel pump. I didn’t feel safe keeping it there so I moved it to some weird ass thing in my trunk but I’ll have to get the amp running again to see if that will work. The B8.5 is a pain in the ass for the remote wire. Also my car shut off on the highway at 75 mph said transmission malfunction and when backing up slowly downhill. Not sure if the new amp had anything to do with that. Also when I open my door, my fog lights and interior lights flicker now. I’ve been having a rough time with it 😅. I’ll get some time soon to mess with it some more.
@@brucecustommotors also in the process of cleaning my washer fluid sensor because I’ve been using rainx products and didn’t realize that it gunks up the sensor and now always reads empty 😂
@@larryhillz183 Selling no as needed until the car is completed but my mate could fabricate another one using mine as template. Does involve cutting bumper, bending some plates and some welding to the car as well for mounting.
Can you send a link for where to buy those big exhaust tips that you have? They look like the rs tips and would I have to get a whole different diffuser for those exhaust tips you have to fit? If so could you also send me a link for the diffuser as well
any diffuser would work. let me find the tips ua-cam.com/video/_cf1Cvutmew/v-deo.html ua-cam.com/video/i1fk1HTwlDo/v-deo.html ua-cam.com/video/Wy6G9nGPGx4/v-deo.html
Hey sounds sick and I would love to do a setup like that on my a5.my main concern is if I was to go with the whole setup you mentioned other than the Downpipe will it still sound the same or do I need to get a downpipe 😄
Links GET A DISCOUNT BCM FLOW MASTER EXHAUST 10 amzn.to/3y1sKwj GET A DISCOUNT BCM HIGH FLOW EPA EMISSIONS HIGH FLOW CATALYST amzn.to/3kahNn9 GET A DISCOUNT BCM HIGH FLOW RESONATOR amzn.to/2WaFofD
Bruce it’s been months, can you drop the link to the end cats before the tips. Please bro. I just got my carbon fiber diffuser with stock rusty exhaust 😂😂😂
yes it can work with anything, but you will get a check engine light if you're not tuned for it, he tune basically deletes the signal to your runner flaps. so essentially, you wont have a cold start any more. which is designed to warm up the engine. if you put it on with out the tune which I have . you will have a rough idle from cold start and a check engine light, but nothing else will be effected
@@brucecustommotors Tune shop tried to talk me out of the intake manifold. Idk if it’s because they’re a UNI dealer. They say for the money it doesn’t add much and people have had issues running them. Ordered my K04 today and injen intake. The dealer also said running S3 injectors won’t do anything because of the spray pattern not in the Stage2+ K04 tune. Looking at a Luft-Technik intercooler kit
Are actually those 2 resonators all the way at the back that give the car a RS3 5 cylinder sound ? Because I actually still can’t believe that this 2.0T can sound like a 5 cylinder
@@brucecustommotors hey ! I just put an ARM test pipe, I kept the first resonator, replaced the 2nd resonator for a flowmaster super 10 muffler and installed 2 vibrant 1794 resonator to each exhaust tip and the sound isn’t even close to this, it still sounds like a 4 cyl ☹️
I found this down pipe that I think includes the high flow catalytic converter www.urotuning.com/products/ie-3-catted-downpipe-b8-b8-5-audi-a4-a5-q5-2-0-tfsi-ieexcg1 What do you think about this should I get this one or should I just buy a down pipe separately from a new catalytic converter and install the separately?
@@brucecustommotors thanks man, just checked dont think i can spend that right now. But what do u think the difference be IF I DID THE SAME EXACT exhaust setup as you except for the downpipe?
Mickey Mouse man, what a lovely sound. Really beats everyone running milteks or AWE. Very unique sound for the engine you have and setup you’ve done. Love it.
Thanks bro cheaper too
Man, thank you so much for this video! Now finally I love how my car sounds, after so many attempts to get that 2.0 to sound beefy. Did same setup but in reverse order (tube resonator already was installed so I didn't want to cut it). Good stuff!
🙏🙏🙏🙏, I would love to here it and my pleasure, Thank you
Can you do a sound video if your car please 😅
Could you make a video😎
Yes please make a video!!!
Just published a video:
ua-cam.com/video/q1bupU6ob1Y/v-deo.html
Links
GET A DISCOUNT BCM FLOW MASTER EXHAUST 10 amzn.to/3y1sKwj
GET A DISCOUNT BCM HIGH FLOW EPA EMISSIONS HIGH FLOW CATALYST amzn.to/3kahNn9
GET A DISCOUNT BCM HIGH FLOW RESONATOR amzn.to/2WaFofD
What other mods do you have done to the motor at the time of this video? Would the 2.0t still sound like this being stock with just the exhaust setup?
Please just make a video with the first 1 minute on loop. Thanks for the great content BCM!!!
Lol Thanks man any thing for my Audi team
Agree!!! Beast!
Agreed!!! Amazing exhaust sounds.
@@brucecustommotors is this with stock turbo?
@@brucecustommotors can you upload a 10 minute video of you just driving the car regularly. Want to hear the sound on a regular drive
Dude ur the only one with this sound, i love it, been searching for this for so fucking long jesus amazing!! Exactly an rs sound, just what i wanted
Man, listening closely, sounds kinda even like an S5 3.0T! Absolutely amazing sounding
Agreed!!!
Does sound amazing!
That’s the biggest complement I got all day, thanks bro, if only I had that super charger wine 😂
Thanks
Always appreciate the love
I had put on the Flowmaster muffler only and got a lot of compliments already. going to put on the rest of the stuff you said in the vid future
whats up bro, man im happy for you, let me know, if you need anything.
@@brucecustommotors for now it sounds good but still had that little raspy sound and whenever I’m on lower rpm the nose is little too loud so putting on the high flo and the two res will bring those down without making the car too quiet ?
Got any videos?
i love how it sounds like a mini v10, for a 4 cyl thats amazing
thanks bro
Just goes to show, Bruce has done it again…! Defying odds
Keep the Videos coming Love this channel, as a women, Im learning so much about my car
My pleasure and thanks, one dream one team
I deleted my mid pipe and cat then had to change fueling in transient speed. There was no extra lag . I have stock muffler and second muffler, car sounds amazing and the best part is all the crackles and bangs , especially during 2 step
I Edited my comment ♤ lmao 🤣 enjoy !
so ur running the first stock converter then a downpipe that it? straight to ur mufflers?
Rebuild your exhaust on my B8.5. sounds amazing 🔥
Love this Audi channel and community. Thanks BCM!!!
Thanks Audi team
Dude best sounding 2.0t out there thanks!!!!
Hey Bruce, this video keeps popping up in my suggestions. And rightfully so! Lol
The sounds you have in the beginning is intoxicating and never gets old.
You mentioned In this video of another A4/5 2.0T with a Flowmaster Super 10 set up. Could you post the link?
yeah, im running an actual 3 inch in/4inch out exhaust from dc on my jetta 2.0t and it straight sounds just like the 2.5 i5 just like yours, especially at higher rpms...i was debating getting the slower 2.5 passat i saw on the lot the same time i got my jetta 2.0t, but since you can actually get a similar sound out of the 2.0, the sluggish 2.5 n/a engine is basically pointless, but yeah, sounds just like the 2.5...great setup to say the least..most vw 2.0ts, and audi 2.0t's sounding like straight rice..
thanks bro would love to see yours
Bro you got that Audi on Beast Mode!!!!
Thanks bro, for the love and support
Hey Bruce, you running 3inch high flow cat or 2.5 inch? Also what about the resonators?
Beautiful A4 dude! Love the build!
Thanks so much brother, let me know if you ever need anything
@@brucecustommotors no prob bro! I'm currently working on my b7 A4 Im doin a wide body kit, rebuilding the 3.2 V6 with some performance apr valve springs, new valves, pistons, new exhaust, and a new tune! Also doing air suspension! And thanks bro I'll definitely ask for some information on some of the stuff I'm doing!
Epic bro thanks for the detailed work thru, your Audi is is a beast💪💪💪
Any time my pleasure, Audi 4 rings
Thank yo so much for this video. I love the sound. What Hi flow cat are you using and with this setup are you able to pass emissions bc I would love to use this but I want to be able to pass emissions where I live as well. Thanks
Yes it’s epa certified, so make sure it’s certified, and you won’t have an issue
And my pleasure here you go amzn.to/3kahNn9
Would keeping the stock cat and changing the mid muffler to flowmaster 10 and removing the rear mufflers sound similar?
I have a 2009 a4 b8 2.0 Quattro, will these parts and setup work for my car? Your build is amazing bro, so inspirational
Is this the wound with stock parts other than the exhaust upgrade or with all your upgrades
Hey Bruce will that test pipe fit on a 2014 Audi A6 2.0 tfsi? Or what would you recommend? I'm doing this build with my son so any information would greatly be appreciated or what do you think about me knocking out the baffles in the cat could that work
What did you use for exhaust tips? Just the glass pack resonators?
Is it 3in pipe the whole way or just after the cat ?
So for the b9 a4. So I just keep a hfc at the turbo then 3 inch non resonated downpipe to the Flowmaster then two resonators? Do you get any drone from this?
Did you add after market exhaust tips after the resonators or just go straight pipe?
Thanks, BCM, your intro is great!!!
Thanks , What exhaust set up do you have for your Audi
I agree! WOW!!!
Love the build man!.
Trying to rebuild this in the UK but I can't get hold of the high flow cat so my question is will any 2 inch high flow catalytic converter work?
Also with the flow master 10 will the single exit Muffler sound the same as this?
Many thanks
Ty 🦾
@brucecustommotors no worries at all bud it sounds awesome.
But will any high flow catalytic converter work as I can't get the same one as yours as I've got the rest of the exhaust but can't get the same cat as you have
Bruce Bruce you killed it again my friend. But every time you do a video my wallet cry’s. Cuz me wanna same ting. 🔥🔥🍺🍺🍺🍺🍺🍺
Lol 😂 bro feel, my next car keeping stock lol, what exhaust set up are you running now
@@brucecustommotors down pipe catless and xpipe borla exhaust I think everything is 2 inch. Should of opened it to 3 god dang it.
Exactly what Marco B said lmao!!
@@mab4870 I have a catted down pipe 3” all the way back and doesn’t sound this good. Stage 2 tune also B8 A5
@@brucecustommotors So should remove my high flow catted down pipe and get a cat less DP and add a high flow res where you do?
Wow that sounds incredible lookin to do a similar setup thank you!!
Thanks bro let me know anything you need
Even if you just delete the middle muffler your car would sound better
@@brucecustommotors I have it straight pipped from front rezzy but still got stock cat and flex pipe and stock res but has a custom Y pipe where the mid was
@@brucecustommotors will do thank you for the tips!! Been watching for about 6 months now love the build keep it up bro!!
@@cole3685 sounds epic
Do you mind sharing the part numbers for the high flow and the resonators, I want to do this on my 3.0
do you need the resanotors if u want it loud but dont want to loose power??
I will end up doing the same setup but would it be a big problem if I just install a high flow Cat where the Oreginal one go? or I have to do it at the specific place?
I don’t have a dang clue about exhaust. I’m starting to get into cars though. I owned this a5 2014 for 3 years and only been dreaming of doing this stuff. Imma try my best to follow you. Also, is there anyway to get 300hp without water methanol injectors or is that a must?
You have a APR or CTS downpipe right? Why dont you use a HIGH FLOW CATALYST from their brand and behind that the BCM Flow master stuff?
Hey what’s up bro, no reason I started off with the down pipe with out the cat , and just did the placement there, at the time they were out of stock. , one of my friends have the set up with it 2 in one, and it feels about the same
Hey, i absolutely love the sound! I have a 2.0 turbo Camaro that i wanna try and make sound like that. I know i wont get that big V8 sound, but man you blew that out the water! Amazing sound! What size are your glasspack resonators?
Looking to replicate this on my a5 2.0 tfsi, do you get much drone? The blackhorse-racing resonators are out of stock, is there another brand you recommend?
im checking, but honestly mine were cheap, i think 2 for 79
@@brucecustommotors thanks, much appreciated! I have the 2.0 tfsi gen 3 and am having a hard time finding a downpipe so think i’ll have to get a custom built. Do you get much drone with yours?
Did you manage to do this?
@@S433D786 Yes i done a 3” from the cat onto the flowmaster 10 (3” in & dual 2.5” out) which then split in to a dual 2.5” all the way back which had a small resonator on each exit. Much louder and sounds aggressive but sadly couldn’t enjoy the sound as wayyy too much drone.
It sounds different than Bruces exhaust clips but does sound good and got a lot of compliments though!
I have since replaced the resonators with a 7x4 silencer on each side, reduced the drone abit but also reduced the exhaust sound.
Looking into ways to reduce drone more or change the set up though.
@@ANT_90 thanks for the reply man. Can you send me some clips?
What about the IE down pipe with built in cat + flexipipe rather than a straight down pipe and replacing the resonator ?
Amazing sounding vehicle!
Thanks my Audi brother
Great job! Sounds absolutely insane, sounds like it’s gonna kill me lmao. Looking to do a similar set up. I have a question:
If I keep the stock down pipe do I need a high flow cat or know?
And if I keep the down pipe stock, should I remove the stock res? And then put the flowmaster on in place of the middle M, then just straight pipe it all the way to the end? Or will that need end res as well. With your setup you have everything so it’s super loud, I just won’t have the downpipe and with the first portion of the question, the high flow cat.
No* not know… sorry
did u get a CEL after doing this. tryna keep the whip legal
Where do I get all the parts? How much was everything in total before and after installation?
Wow this Audi is a Beast !!!!
Means a lot Thankyou 🙏🙏🙏, this works for vw to
Is their any weight savings compared to brands like armytrix etc?
Yes definitely, I honestly love armytrix but the price vs the sound , was a bit to high, it wasn’t deep enough for me, and I didn’t want to ad anything to an already expensive exhaust
Hey, I am thinking of buying an Audi A5 2013 with 100k miles, do you think that it is a good deal, or is it too much?
ua-cam.com/video/hkpSac9-yX4/v-deo.html
Your exhaust vs a complete kit like for example Armytrix? Which will get more power?
i have a Armytrix, and miltech, this custom set up gets more, and sounds better, not as pretty but main
@@brucecustommotors dont you have movies about the armytrix?
love it! what fenders do you use?
thanks so much here you go ua-cam.com/video/HuP6-LYhnuo/v-deo.html
Hey Bruce, I recently got a Cts test pipe on my a4 b9, CEL popped up as expected. Do you think placing a universal cat where the resonator is will make the cel go away? My setup currently is a Cts test pipe, stock resonators on, muffler delete, stock tune. I would like the same setup as yours thts why I’m asking. Thank you.
did you have to tune it? i was thinking the same thing
Are you running the flowmaster 817806 outlaw series axle back quads?
Will it work with a hi-flo catted down pipe as well?
Sounds great my question is will it still pass emissions with the cat that you replaced?
Yes I have an epa emissions catalyst, if meets California specs
@@brucecustommotors The question I was going to ask. Much more affordable and greater sounding 2.0. No need to get rid of my cat less for emissions and to get a 2.5 sound out of a 4banger….. Yessir! So glad I haven’t wasted money on a exhaust and waited.
@@brucecustommotors how did you get it? no shipping on two of ur links because california
Would this still sound the same with the Dynomax Race Bullet resonator?
Do you think this setup will work on B9 a5 ?
Another great vid!
My pleasure anything for th Audi community
Hey Bruce what exhaust tips are you running on the setup?
got them off of ebay, something similar to this, just put in oval exhaust tips, www.ebay.com/itm/182711816604?hash=item2a8a79119c:g:lLgAAOSwh-ZghgqR
I appreciate it Bruce but I also have to ask did you let the shop figure out what pipe fixtures would work on the setup or did you order those as well just curious I’m about to get my exhaust setup exactly like yours because it sounds perfect
I know you have all the models listed, but I wonder if this’ll work on an a6
100% yes, one have been done💪💪💪
Where did you get your caliper paint from
I love that color
Hello brother, getting paint code for you
Nice work Bruce. What happened to the custom tune and turbo upgrade? Intake looks awesome. 👌
All get one out soon, thanks for reminding me,
Hi I’m new to this , can i put a 2.0t exhaust system to a 1.8t? I have an Audi A4 1.8 2012 and I can’t find a 1.8 cat back or exhaust system
Yes !!!
Hey Bruce, love the videos !
Can you pleeeease tell me where I can get a dual exhaust diffuser for a 2010 Audi a4 B8 ?
I think I would freaking find Waldo before one of these. Please help if you can.
Thanks in advance. I have ordered all the parts for the exhaust set up that you have here only missing a dual diffuser.
ok let me check message me on Tuesday, if i forget
@@brucecustommotors Hey bro. Hitting you back as requested. Any luck ? Or do I have to send these parts back
Say fam where did you get your front bumper cover from ?
Hey man, I'm unable to get the dark horse resonators as they aren't available, would the Vibrant Performance 1794 bottle style resonator work just the same? Cheers in advance?
yes it should do the same
Appreciate you getting back so quick, just one more question, do you suffer from drone at all with this set up?
great video
Aye Bruce you should make a video on how to properly install a fuse tap 👀
thanks bro will, do, how you been and the set up
@@brucecustommotors my amp stopped working, not sure what it is. The fuses are all good but I gotta figure out why I’m not getting power to the amp or if it’s broken. Also the fuse I was tapped into for my remote wire was for the fuel pump. I didn’t feel safe keeping it there so I moved it to some weird ass thing in my trunk but I’ll have to get the amp running again to see if that will work. The B8.5 is a pain in the ass for the remote wire. Also my car shut off on the highway at 75 mph said transmission malfunction and when backing up slowly downhill. Not sure if the new amp had anything to do with that. Also when I open my door, my fog lights and interior lights flicker now. I’ve been having a rough time with it 😅. I’ll get some time soon to mess with it some more.
@@brucecustommotors also in the process of cleaning my washer fluid sensor because I’ve been using rainx products and didn’t realize that it gunks up the sensor and now always reads empty 😂
Awesome dude !
thanks bro, much love
Love your car and work!!@ where are you located? Love to do a car meet with you some time
thanks bro in texas,
Awesome. Does that cat need to be plugged in or something?
No
Still waiting for responses. Is this still the current exhaust
Nice one man, it does sounds incredible!
Yours aswell, what exhaust set up did you have on yours, all ways wanted to know
Hey Mr. Beard would you ever consider selling your S3 diffuser, or making one
@@larryhillz183 Selling no as needed until the car is completed but my mate could fabricate another one using mine as template.
Does involve cutting bumper, bending some plates and some welding to the car as well for mounting.
@@brucecustommotors Miltek sport cat down pipe, small 1 foot long muffler and that's it :) Might have a cut out on the way though ;)
Yo never thought id hear a good sound 2.0 did this throw any CEL? Also the hi flow cat isn’t available on your Amazon link anymore
Let me find it
Can you send a link for where to buy those big exhaust tips that you have? They look like the rs tips and would I have to get a whole different diffuser for those exhaust tips you have to fit? If so could you also send me a link for the diffuser as well
any diffuser would work. let me find the tips
ua-cam.com/video/_cf1Cvutmew/v-deo.html
ua-cam.com/video/i1fk1HTwlDo/v-deo.html
ua-cam.com/video/Wy6G9nGPGx4/v-deo.html
How is the drone on this system
So if I get that setup on my Audi A6 2.0t it will sound similar to that?
defitnetly
@@brucecustommotors and do I take the cats out and straight pipe it or down pipe?
Hey sounds sick and I would love to do a setup like that on my a5.my main concern is if I was to go with the whole setup you mentioned other than the Downpipe will it still sound the same or do I need to get a downpipe 😄
You'd need the downpipe mate or it would just be a much much milder version of this.
Agreed
It sounds gorgeous.
Come and do it to my car, please :D
Where did u get that rear difuser?
the high flow cat link you posted says page not found do you know where else I can get the same high flow cat from ?
Ok let me find a new link
@@brucecustommotors okay thanks
Where did u get the wing from?
the resonator link is to the high flow cat, there is no high flow glassback link can you provide one?
Ok will do
Links
GET A DISCOUNT BCM FLOW MASTER EXHAUST 10 amzn.to/3y1sKwj
GET A DISCOUNT BCM HIGH FLOW EPA EMISSIONS HIGH FLOW CATALYST amzn.to/3kahNn9
GET A DISCOUNT BCM HIGH FLOW RESONATOR amzn.to/2WaFofD
Bruce it’s been months, can you drop the link to the end cats before the tips. Please bro. I just got my carbon fiber diffuser with stock rusty exhaust 😂😂😂
Can you show me what i need to buy to accomplish this with clamps?
ok will get back to you
@@brucecustommotors thank you!
@@brucecustommotors Are you making a new video?
Can’t find the HIGH FLOW EPA EMISSIONS HIGH FLOW CATALYST ???? @bruce custom motor
amzn.to/3qLxVR7
What kind of high flow do you use?
The cat or the down pipe?
@@brucecustommotors The cat. I see decent ones online just wanna get it as close as i can get
amzn.to/3kahNn9
@@brucecustommotors thank you!!!!
Will the IE manifold work with a unitronic stage 2 tune?
yes it can work with anything, but you will get a check engine light if you're not tuned for it, he tune basically deletes the signal to your runner flaps. so essentially, you wont have a cold start any more. which is designed to warm up the engine. if you put it on with out the tune which I have . you will have a rough idle from cold start and a check engine light, but nothing else will be effected
@@brucecustommotorsThanks bro!! Is there a way to tune it with my UNI tune tho? I really hate looking at the damn CE light if I don’t have too lol.
@@brucecustommotors Well after failed run at a used RS5, back to building out my B8 A5 lol. Hope y’all don’t mind my questions lol.
@@brucecustommotors Tune shop tried to talk me out of the intake manifold. Idk if it’s because they’re a UNI dealer. They say for the money it doesn’t add much and people have had issues running them. Ordered my K04 today and injen intake. The dealer also said running S3 injectors won’t do anything because of the spray pattern not in the Stage2+ K04 tune. Looking at a Luft-Technik intercooler kit
Dope video
Thanks bro 💪💪💪
How much for all that?
I cannot find your resonator black hourse. can you help me find it?
Ok
@@brucecustommotors i wait your massage)
Are actually those 2 resonators all the way at the back that give the car a RS3 5 cylinder sound ? Because I actually still can’t believe that this 2.0T can sound like a 5 cylinder
Really the hole combination, every thing plays a role
@@brucecustommotors hey ! I just put an ARM test pipe, I kept the first resonator, replaced the 2nd resonator for a flowmaster super 10 muffler and installed 2 vibrant 1794 resonator to each exhaust tip and the sound isn’t even close to this, it still sounds like a 4 cyl ☹️
@@samwh4775 you got any sound clips of your car? I want to get this done go mine too
@@samwh4775 remove all stock resonators
I found this down pipe that I think includes the high flow catalytic converter
www.urotuning.com/products/ie-3-catted-downpipe-b8-b8-5-audi-a4-a5-q5-2-0-tfsi-ieexcg1
What do you think about this should I get this one or should I just buy a down pipe separately from a new catalytic converter and install the separately?
Yes you’re right, it a 100% does, highly recommended, if you consider buying it let me know, I can get you a coupon code
Ok thank you will do!
will it sounds like this with out all the tune and meth and injection you have ? love the sound great video
Yes 👍
will this work with an IE downpipe? I have a 2015 a4 s line and want to do this setup with quad tips
100 % yes , let me know
Dude, wtf!! I thought this was an S5 with the 3.0t. LOL
Bro what’s that beat? Is it yours? That beat is fire🔥🔥🔥🔥 can I have the name?
The day I deleted, I gained so much
Can i make this exhaust with clamps?
yes but, seal it real good to avoid leaks
@@brucecustommotors you know how to make mufflers on the resonators?
Yes it that what you’re trying to do
@@brucecustommotors sorry i mean muffler tips can you explain?
Do you have a link to the resonator
Yes let me get it to you
Here you go bro amzn.to/2WaFofD
What car you trying to set it up on
Where can i get the downpipe from
ua-cam.com/video/QhkPI-Rjd4M/v-deo.html
@@brucecustommotors thanks man, just checked dont think i can spend that right now. But what do u think the difference be IF I DID THE SAME EXACT exhaust setup as you except for the downpipe?
The high flow cat isn’t available on amazon no more any other place where i can get it?