BEST 5 MODS for KAWASAKI KX250 Two Stroke

Поділитися
Вставка
  • Опубліковано 30 вер 2024
  • In this video, I give you the best 5 mods you can make to your Kawasaki KX250 two stroke in order to maximize its handling and performance capability. Check out the links below to for a few of the parts that I used on my bike and suggest for your KX250!
    Pro Circuit Link Arm: www.procircuit...
    Pro Circuit Works Pipe: www.procircuit...
    Pro Circuit Platinum 2 Pipe: www.procircuit...
    🔥SOCIAL MEDIA:
    Instagram: / greghitchko
    🔥EMAIL hitchmotoko@gmail.com with any questions or inquiries
    Looking for parts and tools?! Rocky Mountain will no doubt have them in stock. Check out the links below for all of the products used in the video. I greatly appreciate your support when you do that!
    🔥RMATV/MC OEM Parts: www.rockymount...
    🔥MOTION PRO TORQUE WRENCH ADAPTER: www.rockymount...
    🔥MAXIMA 80W MTL TRANSMISSION OIL: www.rockymount...
    🔥MAXIMA COOLANOL: www.rockymount...
    🔥MAXIMA QUICK MIX CUP: www.rockymount...
    🔥MAXIMA SUPER M PREMIX: www.rockymount...
    🔥RATIO RITE MEASURING CUP: www.rockymount...
    ****TOOLS****
    🔥DEWALT IMPACT GUN: amzn.to/3wQgTl8
    🔥DIGITAL CALIPER MEASURING TOOL: www.rockymount...
    🔥TUSK STEERING STEM BEARING INSTALLER: www.rockymount...
    🔥TUSK CLUTCH HOLDER: www.rockymount...
    🔥TUSK CRANKCASE SPLITTER: www.rockymount...
    🔥TUSK FLYWHEEL PULLER: www.rockymount...
    🔥TUSK CRANK PULLER/INSTALLER: www.rockymount...
    🔥TUSK BEARING REMOVAL TOOL: www.rockymount...
    🔥MOTION PRO STEERING BEARING RACE DRIVER: www.rockymount...
    🔥BENCH BUFFER: amzn.to/3tEmFG1
    🔥PRYME CLEANING WHEEL PACK - 8 Inch: www.prymemx.co...
    PRYME FIBER FLAP WHEEL PACK: www.prymemx.co...
    🔥DREMEL: amzn.to/3lJal4L
    🔥DREMEL MINI WIRE BRUSHES: amzn.to/3An55bq
    🔥EAGLE ONE ALUMINUM WHEEL CLEANER: amzn.to/3BCCVdO
    🔥WIRE BRUSHES: amzn.to/37rtLTB
    🔥WIRE TUBE BRUSHES: amzn.to/3fHw35q
    🔥MAP GAS TORCH: amzn.to/2RIbvR7
    🔥BREAKER BAR 1/2' DRIVE: amzn.to/39vErC7
    🔥STRIPPED BOLT HEAD REMOVER SOCKET SET: amzn.to/3cQXWHf
    🔥MOTOSPORT ENGINE STAND: www.rockymount...
    CERAKOTE TRIM COAT: amzn.to/3hPfm8P
    Use GREG10 to save at PHATHEAD RACING HEADS: lukesracing.co...
    This video is NOT sponsored. Some product links are affiliate links which means if you buy something I'll receive a small commission. Thank you for supporting the channel!

КОМЕНТАРІ • 160

  • @coloradodirtbike5930
    @coloradodirtbike5930 3 роки тому +12

    Suspension is vital on any bike. That's my number 1 upgrade as well, for all bikes. Gotta have the right springs for your weight to get the sag set correctly, getting the most out of your bike in the handling and feel of how it rides. Raising or lowering fork tubes in triple clamps can also help some bikes out when it comes to handling. Once you get your bike dialed in to your style of riding and skill level, riding becomes really fun, as the bikes working with you, rather then against ya.

    • @GregHitchko
      @GregHitchko  3 роки тому +3

      Isn't crazy how once you set up your bike correctly, you start gelling with the bike instead of feeling like the bike doing the complete opposite of what you want it to do?! These bikes do like a correct sag measurement as well, good point. I am at 105!

  • @desmondpiihl8776
    @desmondpiihl8776 3 роки тому +6

    I wish I was taller and only 195lbs. 😂
    Solid stuff man. Great video.

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      Haha its a great height to weight ratio, but not the best height and weight for moto 😂

  • @davideagle4629
    @davideagle4629 3 роки тому +8

    Love the channel man! I'm finally not the only one on a kx250! Nice to hear other opinions and recent things with the bikes.

    • @GregHitchko
      @GregHitchko  3 роки тому +2

      Thanks David! Hell yeah I have to agree with you. it's pretty cool to hear about everyone who has a KX250, gotta love it 🙌🏼

    • @iterminator309
      @iterminator309 2 роки тому +1

      You'll never be alone bro. Got an '02, pretty trick girl...

    • @volksweegan2784
      @volksweegan2784 Рік тому +1

      My last bike was a 2000 kx 250. I miss it alot. One of these days I will have another 2 stroke KX 250. My favorite bike to ride

  • @2strokin70
    @2strokin70 3 роки тому +5

    I've got a 2003 kx250 and I love it..this winter I'll be tearing it apart and making her really come to life by spring!

  • @Angy_yote
    @Angy_yote 3 роки тому +5

    the kx 250 is a goat i have mine board over and added a flywheel waight to help with the bottom end eats those 450s alive

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      I want to get a flywheel as well and make a video of it stock vs. flywheel. Hear they make them much more rideable!

    • @aliciacaldera3175
      @aliciacaldera3175 2 роки тому

      Would u tell me the weight u recommend on the new upgrade flywheel,I’m a dude using wife’s account.

    • @ItsCheechFool
      @ItsCheechFool Рік тому +1

      Make sure you at an ama track if you talking about 450s chances are you talking local 450 riders not demon riders

  • @andrewgaskin753
    @andrewgaskin753 2 роки тому +2

    I put a 09 Rmz250 front end on my 2001 and upgraded rear spring it transformed the handling it used to wash out in corners now it goes where you point it

    • @andrewgaskin753
      @andrewgaskin753 2 роки тому +1

      Strait into standard triple clamps

    • @GregHitchko
      @GregHitchko  2 роки тому

      That was going to be my next question, the 09 rmz forks slid right into the 01 KX triple clamps and head tube??

  • @knuckledustaz
    @knuckledustaz 3 роки тому +3

    05 kx250 here my man and new subscriber

  • @FappinHD
    @FappinHD 2 роки тому +3

    Do you know much about the xtrig triple clamps and if they would fit the standard kx250 2005 chassis?, Looking to acquire them for a set of 48mm kyb forks.

    • @GregHitchko
      @GregHitchko  2 роки тому +1

      I have a buddy who put Xtrig clamps on his 05 as well with the matching KYB 48mm forks. Check out @travis_ferrell311 on instagram!

  • @chriseich3805
    @chriseich3805 2 роки тому +3

    just picked up a 99, hate the forks compared to my 11’ 250f and your vid definitely set me on the path to finding another set of 11’ forks and triple clamps (and wheel and brakes of course) for my 99’.

    • @GregHitchko
      @GregHitchko  2 роки тому +1

      Right on Chris! Might as well my man. You'll get an updated feel for sure!

  • @rapscallion3421
    @rapscallion3421 2 роки тому +2

    Race fuel almost never makes a impact on power, pump gas will work just fine. Race gas helps the engine cool itself because of the combustion point. Race gas is definitely not necessary on a stock MX bike

  • @ItsCheechFool
    @ItsCheechFool Рік тому +1

    My stock one runs better the obvious flaws easy to master

  • @newellweeks2759
    @newellweeks2759 3 місяці тому

    I JUST BOUGHT A KX250 2003 ITS GOT ROCKET RON FRONT SUSPENSION AND I NEED TO DO THE REAR SHOCK ,,RESEAL OR REPLACEMENT SHOCK?? IM NOT A RACER,AND MEDIUM JU😅MPS AND WOODS RIDING,, THANKS

  • @motomoto986
    @motomoto986 5 місяців тому

    Did the same shock spring work when you used the pro circuit linkage? ( forks and shock already revalued. Also what is your fork height with that 2017 forks

  • @mojavemike3060
    @mojavemike3060 2 роки тому +2

    Looking at putting 2010 kx250f forks and 2010 450 shock on a1998 kx250
    Any thoughts and advice

    • @GregHitchko
      @GregHitchko  2 роки тому

      Great idea! You will need a Trick Engineering Steering stop for the frame so the 2010 clamps work. I am actually not too familiar with the shock side of things as far as going with a 450 shock.

    • @rapscallion3421
      @rapscallion3421 2 роки тому

      The rear shock is going to be taller from the 450, you will have to do some custom grinding and fitting. I have a few buddies that went this route and said they could never get a the kxf forks and shock to act right. It's not a very good upgrade at all, the stock suspension is actually pretty good on these bikes they just need to be dialed in

  • @rockman49er
    @rockman49er Рік тому

    Just rebuilt a 98 kx250 and I've had 89 cr500 yz490 rm250 and I can't touch the ground on this 98 kx250 is this normal I'm 6ft tall can't believe this lol

  • @dezracr
    @dezracr 5 місяців тому

    I had a 04 that I bought in 2013 it had less than an hour on it the guy I bought it from bought it in flagstaff and rode it one time it scared the hell out of him next to my kx500’s it was my fav 2stroke I’ve had

  • @maxrpm2215
    @maxrpm2215 2 роки тому +2

    Hey from Melbourne Australia 🇦🇺, im running a standard carb on my 2006 and with 98 octane available at the pumps they still ping and detonate regardless of jetting. I've even had 105 race fuel still did it. In the end i worked out that its a volume of more air and more fuel that the stock carb can't give. The fix is offset bore to 39.2mm detonation and pinging gone and the bike runs way cooler in temp. You'll need to re-jet completely im running 190 main that's how much fuel is being pulled in. The power gains are insane.

    • @GregHitchko
      @GregHitchko  2 роки тому +1

      Right on! Thanks for that solid info about the pinging my dude. Sounds insane!

  • @lysol6663
    @lysol6663 3 роки тому +3

    I'm thinking of rebuilding my 99 kx250
    Maybe slowly with time, to see my options

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      Hell yeah! Let me know if you have any questions!

    • @lysol6663
      @lysol6663 3 роки тому

      @@GregHitchko you will definitely have some question to be answered ,thanks

  • @duarte22mx
    @duarte22mx Рік тому

    Hello guys. I have a KX 250 2004 (M2). Can I use the triple clamps and fork of a KX250F 2011? Is a Showa SFF.

  • @lelenbates3367
    @lelenbates3367 5 місяців тому

    The best upgrade I made to my 1998 was an Eric Gorr 310cc big bore kit.

  • @wolfslayermountaindogs1080
    @wolfslayermountaindogs1080 2 роки тому +2

    I was also wondering if there is a better gear you can put in the bottom end to compensate for lack of power

    • @GregHitchko
      @GregHitchko  2 роки тому +1

      That is a great question Luc. I will have to do some research and see if anyone has done this!

  • @drye1972
    @drye1972 Рік тому +2

    I just bought a 2006 KX250. I finally had an opportunity to ride it and see what it can do. Its amazing of the timing of seeing this video. I say that because I did get the opportunity to experience exactly what your talking about concerning the handling in corners and at fast speeds.

    • @GregHitchko
      @GregHitchko  Рік тому

      Right on! I'm stoked for you about the KX250 purchase my dude. I'm glad you can feel those things with this motorcycle too. Correctly sprung and valved suspension is a great first place to start with the handling. After this video I did get the suspension finally set up for me, I threw the stock clamps and link arm back on and it made a world of difference.

  • @jaredcrist4235
    @jaredcrist4235 3 роки тому +3

    You need a new reed boot my guy. Or my recommendation is always a boyesen rad valve, that way it’s all aluminum and uses a circulair boot to the carburetor. It also moves the powerband hit 500 ish rpm sooner (at least on the 03 and 04 kx250.)

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      New reed boot is definitely on my list of things to get 👍🏼!

    • @claudiocoelho8161
      @claudiocoelho8161 3 роки тому +1

      I have boyesen pro series reeds(dual stage) and what a diference.
      I recommend.

    • @1bad335ii
      @1bad335ii 2 роки тому +2

      What’s the best year for kx250?

    • @Ozzierob
      @Ozzierob Рік тому

      @@1bad335ii 95 to 99

  • @ravenrivera1950
    @ravenrivera1950 3 роки тому +2

    Can you tell me what kind of wheel and paddle tire I would need for a 2000 kx250 2 stroke?

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      You will need a 110/19-19 tire! Any type will work great

  • @darrenvenditti2593
    @darrenvenditti2593 3 роки тому +3

    I have an 06 and an 07 and I am only 150lbs and the stock spring rate was ok for me. PR2 in Hanna’s town PA has the very best setting. I have had pro circuit, race tech, pro action and the PR2 is the very best by far. It is set up with the pro circuit linkage. PR2 has setting for the stock 48mm AOS that rival SSS and way way blow away the shitty Kx 250 sff forks. I know I have owned them all.

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      That's super interesting Darren. I can see the stock spring rates being perfect for that weight. That is cool to know about PR2 since all of those other suspension companies are heavy hitters in the suspension world. Do you have stock clamps?

    • @darrenvenditti2593
      @darrenvenditti2593 3 роки тому +1

      @@GregHitchko yes I still have the stock clamps. Would love to try some others but it handles so well now I haven’t been super activity seeking them. I have got the rear end handling so well that I have been able to lower the forks about 15mil and with a Tubliss mx33 on the front turns alright. Turns like a Kawasaki which is a little more of a rear steer anyway. Other people have rode it and have been amazed how well it does. I’m not a pro but I’m not slow either I’m a vet A rider that still does normally all of the big jumps on most tracks.

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      @@darrenvenditti2593 hell yeah that's rad, yeah you have to be a little more of a rear steering guys with these kawi's for sure. I am a vet B guy so totally get where you are coming from. Wish I could ride your bike, I am curious about the tubliss up front too.

    • @darrenvenditti2593
      @darrenvenditti2593 3 роки тому

      @@GregHitchko you can if you ever make it to Florida Sand lot

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      @@darrenvenditti2593 I will definitely keep you posted if I do!

  • @ajbritton1569
    @ajbritton1569 3 роки тому +2

    where do we get big bore kits from?

  • @tm.galliers9825
    @tm.galliers9825 Рік тому +1

    Hi greg! Love the builds!
    I am currently rebuilding a 07 kx250 the forks are are in bad shape, i was thinking rather than having them re chromed etc, do any other model kxf fit into the original kx triple claps without modifications?

    • @GregHitchko
      @GregHitchko  Рік тому

      Thanks my dude!! Unfortunately I don't believe that any KXF forks will fit the KX triples because of the different clamping diameters. But normally you could just find the forks and triple clamps together as a set. Then you'd just need to get a Trick Engineering steering stop and you are golden!

  • @hydarrahmati6257
    @hydarrahmati6257 3 роки тому +4

    I’m kinda glad I got the 03

    • @GregHitchko
      @GregHitchko  3 роки тому

      I'd love to try one out to compare the differences!

    • @michaelbooker8207
      @michaelbooker8207 3 роки тому +1

      I just got a 03 bout an hour ago

    • @GregHitchko
      @GregHitchko  3 роки тому

      @@michaelbooker8207 oh hell yeah! I support that decision ✊🏼💨

    • @michaelbooker8207
      @michaelbooker8207 3 роки тому

      @@GregHitchko Yeah dude wanted it gone cause it had "Blown" motor.... Put new carb on it changed oil runs great and cranks first kit. Got it for $750

    • @GregHitchko
      @GregHitchko  3 роки тому

      @@michaelbooker8207 whattt that is solid! Nice pick up right there. Stoked for you. So hard to find those types of deals right now too

  • @dodgybodger3124
    @dodgybodger3124 Рік тому

    A new fitter younger body would help me 😂😂😂

  • @aussiedigger1441
    @aussiedigger1441 2 роки тому +2

    My 01 250 came with Ohlins rear shock and Ohlins springs in the forks. I'm 57kg and I'm thinking of putting the original shock & springs back on because it feels very stiff and rides high. I'm not a track guy but the bike is dangerous in wet slick conditions! The bike also came with Platinum pipe and pro circuit silencer. Very exciting now it's 20 years old and qualifies for VMX.

    • @GregHitchko
      @GregHitchko  2 роки тому +2

      So sick my dude! Wouldn't be a bad idea to swap out the springs so it's more rideable for your weight! They are super hard to find, but a Platinum 2 pipe will add some more bottom if you are interested as well.

    • @aussiedigger1441
      @aussiedigger1441 2 роки тому

      Hi Greg, I'm in the process of a carb rebuild and can't find information on the slow jet? Is it just fully seated or a turn out? There's no spring on the jet & could back out if it's not seated? Can't afford a Lectro yet.
      Cheers Aussie

  • @MiikeyLawless
    @MiikeyLawless 3 роки тому +2

    My brother has a blown up 07 250f, wonder if that pro circuit linkage would fit.

    • @GregHitchko
      @GregHitchko  3 роки тому

      I don't believe the 250F linkage arm would fit on the 250 2 stroke since the part numbers are different!

    • @MiikeyLawless
      @MiikeyLawless 3 роки тому

      @@GregHitchko Yeah, which kinda sucks lol. They appear to be slightly different lengths. At least i have some clamps and forks at the ready hey? Need to find me a clean 250 now.

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      @@MiikeyLawless Exactly! I noticed a huge difference with the clamps. The stock forks would work with with 22mm clamps, but the less offset is the kicker.

    • @MiikeyLawless
      @MiikeyLawless 3 роки тому

      @@GregHitchko For sure, I remember them making a huge difference on the 250f. I absolutely hated the unsure feeling in the front end of those bikes!

    • @GregHitchko
      @GregHitchko  3 роки тому

      @@MiikeyLawless I forget that I had one back in the day as well that had an athena big bore it on it. It could have benefited from a link for sure!

  • @Hockeygoaliedad
    @Hockeygoaliedad 2 роки тому +1

    Hi question on the upgrades……I have a 2004 kx250 and would like to know about the linkage (should you know) I like the pro curcuit linkage arm but it’s an 05 and up part. Is the linkage arm on the 04 oem model better than the 05?

    • @GregHitchko
      @GregHitchko  2 роки тому

      Great question my man! Kawi did switch to the new linkage design in 2004 but I don’t believe it will since the Part number is only for 05-07. Check out Kouba Links actually! They have links for the 04 that is specific just to that bike.

  • @xxnickthegreekxx
    @xxnickthegreekxx Рік тому

    Here in the UK shell V-Power is 98-99 octane

  • @mikewilliams7330
    @mikewilliams7330 3 роки тому +1

    🤣🤣🤣 that's everything I need to do to my 19 kx250f.

  • @claudiocoelho8161
    @claudiocoelho8161 3 роки тому +2

    I have 2007 kx and that Help alot thanks

  • @robbiefowler-gs9ms
    @robbiefowler-gs9ms Рік тому +1

    Hi, great video and loads of information, got a question, could I put 2013 on 48mm forks with 22mm offset triple clamps on a KX250 model year 1995/96?

    • @GregHitchko
      @GregHitchko  Рік тому +1

      I think you can pull that off! You will just need to get the Trick Engineering Steering stop. Hopefully the steering stems are the same size, if not, you will have to swap those out as well.

    • @robbiefowler-gs9ms
      @robbiefowler-gs9ms Рік тому

      @@GregHitchko cheers dude thank you for the information. Much appreciated 👌🏼👍🏻

  • @sharkosspunchone9631
    @sharkosspunchone9631 2 роки тому +1

    I have an 03 its in pretty good nick and its stock except for a pro circuit platinum and jetting, and ive played with the gearing a bit so its not such a pig in the bush.
    it really is a bit soft but i ride bush tracks so sometimes its a good thing

    • @GregHitchko
      @GregHitchko  2 роки тому

      Hells yeah dude! Yeah the suspension being a little soft will definitely help soak up the bumps in the woods. Moto will be tougher but it's hard to set up a bike that does both really well!

  • @KIPSSYTEM
    @KIPSSYTEM Рік тому

    Porting,Kip system?

  • @christophersmithsonian3350
    @christophersmithsonian3350 2 роки тому +1

    AttaBoy Greg ! My KX125 Is a Pro Circuit team racebike that came with great KYB suspension /link Pipe ECT . All your tips are great advice . But instead of C12 I run MRX02 it's oxygenated
    And gives my 125 10 to 15% more power w/Blenzal Racing Castor

    • @GregHitchko
      @GregHitchko  2 роки тому

      Thanks my man!! That’s wild that MRX02 increases the power by that much, insane. Maybe it’s the smell ;) haha damn I love it

    • @christophersmithsonian3350
      @christophersmithsonian3350 2 роки тому

      Yeah Greg! It feels like 10% more power? I can't say for sure I don't have a Dyno

  • @aliciacaldera3175
    @aliciacaldera3175 8 місяців тому

    I bought 2009 kx250f forks,but now I’m wondering are the 2018-24 forks way better,I was planning on installing them on my 2005 kx250 with pc 22 mm fork offset thanks to your great video.I’m only a vet rider 65yr old but if theirs isn’t much difference I’ll keep the 09, but I want your opinion or anybody else on the newer forks,I haven’t rode in 5 yrs due to illness but next year, maybe.

    • @GregHitchko
      @GregHitchko  8 місяців тому +1

      Those Showa 47's from the 09-10 are some of the best. DLC lowers and DLC internals as well. I just bought myself a set of 2010 kx250f forks for my 04 KX125 as well. Get them sprung and valved for your ability and weight and you will love them! It'll make a huge difference 🙌🏼

    • @aliciacaldera3175
      @aliciacaldera3175 29 днів тому

      @@GregHitchko Greg,I’m planning on buying a 2007 kx250 with 2022 kx450f A kit suspension,but I found out,that those 2022 49mm forks have a rake of 27 so in my 07 it’s not going to turn well,right?

  • @craigsteinman9807
    @craigsteinman9807 2 роки тому +1

    The kxs are cool..but u really have to be a Kawasaki fan to through all that ..just to go from really bad to just inferior handling.. but I see guys really rip on these bikes my homie has a 06 it rips

    • @GregHitchko
      @GregHitchko  2 роки тому

      Do you have personal experience riding them, Craig? I do think you would be surprised. MXA torched this bike back in the day but swinging a leg over it, it rips like your buddy's!

    • @craigsteinman9807
      @craigsteinman9807 2 роки тому

      Ya his bike smokes my yzx corner to corner ..but strangely I get him on starts and roll ons. But yes I have rode in the trails and I am a shorter dude really did like it..but I sent him this video. I am sure he will get ATLEAST the extended link.. I like your videos man

    • @GregHitchko
      @GregHitchko  2 роки тому

      @@craigsteinman9807 it's so interesting to notice the differences between them eh? That's why I created my two stroke shootout project! Check that video out on my channel if you haven't yet. It's going to be hard to find the PC link for it but there could be some out there on ebay or something. These aftermarket companies need to start making more parts for the extinct two strokes. You made the right move buying that YZX in terms of parts availability. Plus it's just a GREAT overall bike. Cheers Craig, thank you for the comments and kind words my man.

  • @JaRhule
    @JaRhule Рік тому

    Just buy a CR250

  • @chevellecriado
    @chevellecriado 3 роки тому +2

    Clean bike my guy

  • @sludge86
    @sludge86 2 роки тому +1

    Awesome stuff Gregg. I’ve got a 99 I’m working on :)

    • @GregHitchko
      @GregHitchko  2 роки тому

      I would LOVE to build that generation KX sometime. I'd like to find a 125 actually, that would be really cool.

  • @wolfslayermountaindogs1080
    @wolfslayermountaindogs1080 2 роки тому +1

    Ya I put a newer yamaha rmr suspension front end on mine and did the lowering procircuit arm vforce reeds and next I'm gonna put the smart carb 2

    • @GregHitchko
      @GregHitchko  2 роки тому

      How do you like it so far with those upgrades??

    • @wolfslayermountaindogs1080
      @wolfslayermountaindogs1080 2 роки тому

      @@GregHitchko I find it has tons of power for me bottom end wise I'm 250lbs and it's still a handful to keep the front end down although I still find the front end is a bit to be desired might need to put on the other triple clamps

  • @party_on_dudes
    @party_on_dudes Рік тому

    I may have missed something on the fork/triple clamp sizing. I have a 2001 KX250 and definitely want to do a fork upgrade if it helps with stability. If I get KX250 triple clams from a 2013 and newer bike it will fit? Then I just need to get forks that are for 48mm? Bearings still the same, or do I need to do any modifications to get the triple clams to work?

  • @jameswatson7514
    @jameswatson7514 Рік тому

    Hi interesting video I’ve got a kx 250 2006 and it’s like a light switch it’s picking up power after half throttle in every gear power band kicks in not at a comfortable time very sketchy 😅

  • @kylemasucci1158
    @kylemasucci1158 2 роки тому +1

    What stem bearings would I use?? Should I order them for a 05’ kx250 or 2017 kx250f ? As I bought 250f triples and forks… thanks

    • @GregHitchko
      @GregHitchko  2 роки тому

      They are the same bearing/part number so they will fit no matter what bike you choose it for! I had the 250f bearings in there for reference because they were still good from the stem and triples I got from the 250f.

    • @wilfredonieves6036
      @wilfredonieves6036 2 роки тому +1

      @@GregHitchko so that 2017 front end suspension would be direct Bolton ?? Just want to double check before i pull the trigger on buying suspension.

    • @GregHitchko
      @GregHitchko  2 роки тому

      @@wilfredonieves6036 bolted on direct for me! The only thing you need is a Trick Engineering Steering stop because the stops on the clamp on the AL framed bikes are wider apart. Because of that, when you install them on to the steel framed bike, the forks will hit the frame.

  • @Factory928AC
    @Factory928AC 3 роки тому +1

    I have an 05... is there a complete shock upgrade or swap from a 250f ?

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      I'm not completely sure on the 250F shock fitting on the two stroke but honestly, I don't think it would be worth it. The stock shock is totally fine, make sure it's sprung correctly and a revalve, and that thing will be awesome for you!

    • @Factory928AC
      @Factory928AC 3 роки тому

      @@GregHitchko thank you for the input ... I’ll keep it and rebuild and worth with it 🤟🏾

  • @tajjson
    @tajjson Рік тому

    What about the mods for KX250 98-99? I am rebuilding one right now.

  • @timdonnelly8392
    @timdonnelly8392 2 роки тому

    Greg do you recommend v force reeds or boysen rad valve, 2003 kx 250,Im hearing more reference for the rad valve for this bike but not really sure, I run the v force on my ktm 300 Xc , 2016 and it seems to be perfect

  • @lindenphilippson
    @lindenphilippson 3 роки тому +2

    Another A++ video! Couldn't agree more on your top picks. I feel fortunate to have access to 94 octane ethanol free gas here jn Canada

    • @GregHitchko
      @GregHitchko  3 роки тому +1

      Thanks Linden! Man I am super jealous of that 94 non-ethanol fuel that you can get, that's solid.

    • @GoProBlizzard
      @GoProBlizzard 3 роки тому +1

      The stuff sucks, it’s not ethanol free. It’s 10%

    • @lindenphilippson
      @lindenphilippson 3 роки тому

      @@GoProBlizzard In canada here its 94 ethanol free

    • @GoProBlizzard
      @GoProBlizzard 3 роки тому

      @@lindenphilippson I'm in Canada. Petro 94 is 10%. Ask them. It's 94 because it has 10% ethanol which is a natural octane booster.

    • @lindenphilippson
      @lindenphilippson 3 роки тому

      @@GoProBlizzard Hahahaha thats a hard no bud

  • @randomvbg7653
    @randomvbg7653 2 роки тому +1

    Does this also go for the 2002

    • @GregHitchko
      @GregHitchko  2 роки тому

      These are best for the last generation models!

  • @shanecircle1236
    @shanecircle1236 Рік тому

    Yeah man! I have a 2002 kx 250. First year of the 48mm forks. Just had them serviced by Pro Circuit on 2-14-2023.Cost $355 before shipping.Already have stiffer springs and set up by PC. I have the older shock linkage with Pro Circuit 125mm pull rods. I will be taking your advice and putting on 2016 kx250f triple clamps .I like my v force reed block and Stealy medium flywheel weight. Definitely more power with a PC Platinum pipe and R304 silencer. 50t rear sprocket.. I've had this bike since 2003.! AMA vintage days !

    • @GregHitchko
      @GregHitchko  Рік тому

      Dang that is awesome that you have had the bike for so long Shane! I commend your self control of not selling it and upgrading to a newer model. I wish I could have been that guy back in the day with a few of my bikes but I was always using the money from the sale of the prior bike for the "new" one lol.

  • @elleryprefontaine2975
    @elleryprefontaine2975 Рік тому

    Thanks for the info on the bike. I picked up a used 2002 kx 250. Crazy fast bit the suspension is toast i think. Also i am 5'9 and 220 lbs. Will be getting a new rear shock and spring to start with and changing the oils. 90 octane so far does the trick and no pinging. Also for anyone getting a used bike check to see if there is an airfilter, mine did not have one lol but have recently installed. Who the fuck runs a bike with no filter😂. Will be looking at the suspension and new exhaust first. Also i am not a motocross rider more trails in the bush.

    • @GregHitchko
      @GregHitchko  Рік тому

      How in the world did your bike not have an air filter in it haha. Brutal! Have fun with that 2002, I'm a big fan of those as well. Definitely make sure you get the suspension tuned for you and it will be a monster 💨

  • @cassarj76
    @cassarj76 5 місяців тому

    Great video

  • @aeror115
    @aeror115 3 роки тому +1

    Great vid brother

  • @no-namecrown5510
    @no-namecrown5510 Рік тому

    Here in Australia we can buy 98 ron from the pump.

  • @denisonphillips2483
    @denisonphillips2483 Рік тому

    Hey I have a 2005 Kx 250 about to start rebuilding, so been watching. With the fork upgrade to a KXF set up do you need front wheel ,Brakes etc or does it all just fit up.
    Thanks

    • @GregHitchko
      @GregHitchko  Рік тому +1

      Right on dude! Everything from my 07 just mounted up to the KXF forks. Pretty sweet

    • @denisonphillips2483
      @denisonphillips2483 Рік тому

      @@GregHitchko Thanks mate appreciate it.

  • @jamesestis3249
    @jamesestis3249 Рік тому

    Love what you do

  • @motomoto986
    @motomoto986 7 місяців тому

    Awesome video very helpful!!👍

    • @GregHitchko
      @GregHitchko  7 місяців тому +1

      Hope it helped man! Thank you 👍🏼

  • @the4527klaus
    @the4527klaus 2 роки тому

    millennium big bore kit

    • @GregHitchko
      @GregHitchko  2 роки тому

      I've always wondered what a big bore would be like in one of these bikes. Do you have experience with running them, if so, how was it??

    • @the4527klaus
      @the4527klaus 2 роки тому +1

      I picked one up not too long ago. only taking it out a couple times and so far it's just tried to punch me in the face and kill me. I imagine When you gets used to the power It will become a lot more fun but so far with just kind of scary. It's one of those all or nothing bikes now

    • @GregHitchko
      @GregHitchko  2 роки тому

      @@the4527klaus dang that's wild! I'd really love to try one out eventually

  • @GMAN420BC
    @GMAN420BC 3 роки тому +1

    First time watching channel. This sounds like a paid advertisement for Pro Circuit products. The element of bias makes you lose credibility in what you say.

    • @GregHitchko
      @GregHitchko  3 роки тому +3

      Haha love the feedback Mr Tyler, if only I was getting paid. Pro Circuit is simply a company I trust and one of the only companies that make a lowering link and triple clamps for this model any more. I'd love for you to share your top 5 modifications and why, so other people can benefit from the knowledge!

    • @GMAN420BC
      @GMAN420BC 3 роки тому

      @@GregHitchko I am sure pro circuit makes quality replacement parts. Accordingly, they are pricey in comparison to other replacement parts. You get what you pay for.
      I am just as sure that most people, that aren’t sponsored, are going to upgrade for the sake of upgrading. Not many will buy a new or next to new bike and decide that the parts are inferior to their skill level and will spend hrs tearing the bike apart to upgrade a part that isn’t broken and costs a lot of money. (Let’s face it, you’re not buying a bike if it’s not adequate for your requirements). If you bought an older, used bike, it’s because you have a budget.
      I could give you my top 5 upgrades to a Harley, for example, and recommend an Arlen Ness Frame, Arlen Ness billet wheels, Arlen ness billet whatever. YES they are quality upgrades but out of reach for most and the performance gain will not be noticed.
      I recommend a video that gives your top 5 affordable upgrades for the average rider. That will require some research because, in reality, stock parts perform pretty good and are rarely the limitation in track times. Rider skill is the culprit in most cases.

    • @100pyatt
      @100pyatt 2 роки тому

      Pro Circuit is stellar quality shizz tho !! 🤟🤟

  • @kylevoss208
    @kylevoss208 2 роки тому +1

    Bro you should totally do a video like this for that CR250 for so many of us out here rebuilding older bikes and videos like this help so much for the new guys like me. I love hearing reviews about different parts and how they may or may not affect the bike in a positive way

    • @GregHitchko
      @GregHitchko  2 роки тому +1

      Thanks for the suggestion Kyle! I would love to pout something like that together for you guys. I will put it on my list of things to get done, but I truly love the idea. I think it would be a hit!