How to trim out a pocket door!
Вставка
- Опубліковано 2 жов 2017
- This video contains some tricks on how to trim out a pocket door! Feel free to subscribe to my channel and click the bell to get notified on my next videos. Also leave your questions or any comments down below and leave a thumbs up if you like this video.
#homeimprovements
#howtotrimoutapocketdoor
#kenjaeck
Recommended channels:
/ 3556malen
/ @mjsadventures1349
Man am I glad I found this video. I have some excess movement on my passage side of a pocket door and I wasnt sure how to dress it up. This is a great idea
Most don't take in account if you ever need to remove or adjust the door. On the inside of the room, the bathroom side, you should make the head jamb trim piece removable. That means leaving ends square and screwing it in place for future adjustment/removal. You won't be nailing bottom edge of casing either. You can fill screw holes and paint or use screw caps to cover screw heads. Like the pocket detail when door is closed. I cut the tabs of the guides off that stick into the door opening, looks a bit neater and you don't hit them when vacuuming.
After reading many , many , many comments , I need to congratulate you , because you deserve it !!! it's amazing how wrong information is more acceptable then the right one and how do people make this videos without having a idea how to trim out a pocket door , good job bdyt
Thank you Ken. I hid the plastic door guides by carving out the back side of 2 pcs of ripped 1 x 3 on the pocket side of the opening. Used 2 screws in the guides (to prevent guide movement) then hid the guides behind the trim.
Love the detail with the recess! Very good idea. Thank you!
Ken, perfectly clear and concise. Just what I needed to finish this project.
Thanks Tim. It was my first time using a pocket door in my house and your video was just what I needed to finish it out!
Thanks Ken! I'm getting ready to trim out the pocket door I just installed and this recessed idea is a great one.
This is so pure . Thank you ken!!!
This is what I initially figured how it’s done but didn’t know for sure. Thanks for the share
Great video! Thank you for the hints. After getting in the door I was very confused on how to go about doing the inside trim.
Great video Ken! Thank you. Just installed a pocket door and was clueless how to trim it out. This was hugely helpful and I love the recessed trick, very nice addition for added room isolation.
i realize Im pretty randomly asking but does anyone know a good place to watch newly released tv shows online?
@Quinton Grey I watch on FlixZone. You can find it on google =)
thank you Ken for uploading this video and taking the time to do this. helpful!
Thank you!! Just the information I need to complete the job!!! Great work!!
Great video...well-done. Thanks for posting. I was looking for ideas how to properly trim one of these out!
Exactly what I needed, thanks. And glad you left the boo boo's in too.
Great job! I love the recessed look. I'm going to do this with mine now...
MoST informative information on the small details that left me saying hmmmm...thank you for this video!
Saw exactly the bits that I was wondering about. Thanks so much for your clear description.
Thanks for the tips very informative and straight to the point
Wow 👏 😮 you are doing well nice meeting you here ❤❤❤👍👍
Thank you, this was just what I needed to know.
I like the recessed jamb. For some reason the instructions say not to use a dado jamb, but it seems to work for you.
I like the idea of a recess.
great instructional demo
Just what I needed. Thank you!
Great video, Thanks for posting
Top video for finishing pocket doors, the manufacturers that make this frame should sponcer this video that would sell trims goo suit. Thank you great explanation
Thank you!!
Thanks for sharing this tips,watching from Spain
very helpful thanks ken
great video always good 2 learn something new
That's perfect!
thank you for sharing how you do it so coll and good job
Thank you for sharing ❤
Great video
Good tips.
Good video thanks
Nice work
Just what I needed to finish out my long running pocket door install! Thanks!!!
Hello. Great job. Fullpack
Sending my full support and God bless
Good works maiza
Thanks
use a square when nailing the first board to the pocket frame... put top edge of square at bottom of other hole rest nailer guard on top of square.. you'll never miss..
Watching here keep safe godbless m.a
I like your work boots. haha
Lol! Just relaxing - we made this video 10:30 at night - besides the wife doesn't allow shoes in the house!
Question: Are the plastic bumpers generally necessary? We recently had a contractor install several pockets doors when we finished our basement and feel like the plastic bumpers and steel screws that lie on top of a dark wood floor give a strange look.
Very helpful! Are jambs sold with recess?
Sending my support new friend here from Maiza Alawia see you around
Sending my support. -Pol
How do you make the stop trim?
Nice choosing content frnd.kp sharing enjoy vlogging full.aupport sheisjo
Nice video po , keep on vlogging
m.a
So nice .. Keep it up.. Sending love .. From lalabS m.a
Sending my support from bisdacan
are those slippers OSHA approved?
Great video just what I needed to know. Did u install the pocket door too? Where did you get the hardware?
Yes, I bought the unfinished pine door slabs from Lowe's, painted on 3 coats of stain and 2 coats of satin clear. I installed them with Johnson Hardware - ordered what I needed, online, as my contractor used Johnson Hardware kits to install the pocket door framing. Just a note to get your back door rubber stop the right thickness, so the door is level with the trim, when it's all the way open.
I see you didn’t need a transition on the floor due to the flooring running into both rooms. I’m replacing a existing door with a pocket door. Can I use a door jam as the transitioning the floor so that it matches the door jam I am installing? And how can I find that door hardware? Can you post a link ?
Thanks for sharing. Where did you get the door handle? I cant find one like that.
Please look at the previous comments as I answered the same question. I don't have the answer handy right now.
Where did you get your door pulls? I like that style a lot better than the rectangular ones.
I found them at www.build.com. They are made by Sugatsune (Spain) part# DSI-3250-35. They make the door easy to open and close, which is important for the enjoyment of a pocket door. Well worth the money!
How do you lock the door?
Good, work. Have you made a locking pocket door?
I have not. I had 4 pocket doors we trimmed out, but none of them really needed a lock.
Keep safe po..god bless m.a
Gudjob sir so beautiful
Great Great Video. Where did you get the hand grab????? and what is it called looks awesome.
Look at my answer earlier to Sarah Easter. I'd copy and past it for you, but I'm on my phone.
@@mnspeed1932 Thanks.
nice work. what is bdyt talking about?i want to make sure i leave open to adjust in future???
The upper inside trim on the back side. He thought I should have just squared it off and used small screws so I could just unscrew it if I wanted to take the door off for any reason. I didn't waste my time doing that. I'll just take a small screw driver and work the trim off if I want to do that.
Great work! What the name of the door lock you used?
Sugatsune stainless steel door pull
Good job. One thing I see, the plastic door guides should go in before the trim is installed so they do not protrude into the door opening.
The instructions that come with the Johnson pocket doors say to do it how he did. That way you can center it between the trim and get a even reveal.
You need to be able to adjust the guides up or down to fine-tune their performance against the door. I don't understand why they make protruding guides either.
Dikit tamsak done..kalimbang all
I cannot find the 1-3/8" wide trim at lowes at all! All they sell is 1-1/2" in my area! ugh! any suggestions?
If you have a table saw, you can rip the 1-1/2" down to 1-3/8's. Otherwise check another store that sells lumber for 1-3/8's.
Yeah, it is very strange that they sell all the pocket door stuff but not a size of pre-cut wood that fits. And since HD and other lumber places will only do cross cut, you have to have a table saw. I used 5/8" drywall so even the larger peice has to be cut down for me as the store only has 4 9/16" for 2x4+ 1/2" drywall.
New subscriber here
@maiza
💖Sending our love and support From Team Maiza Alawia😊💖
We love the hardware... where did you get it from? Thank you!
I found them at www.build.com. They are made by Sugatsune (Spain) part# DSI-3250-35. They make the door easy to open and close, which is important for the enjoyment of a pocket door. Well worth the money!
@@mnspeed1932 Thank you! They are beautiful...
Hello sending my support from maiza alawia
Ken
Where did you buy the handle set ?
Thank you
I don't remember where online I ordered it from, but see Lowe's now sells them. It's the Sugatsune 1.97 stainless steel door pull.
Done dikit kalembang Maiza
What are the shims in place for?
I put the nails through the shims to secure it plumb.
Sending support drom bisdacan
How does one get the offset
Just measure it.
Nice vid..thanks for sharing..keep on vlogging #maizaalawia
hello po im from maiza alawia
New sub Emilyn World
Sandals and shorts? How can I trust this information if you're not wearing crisp jeans, a flannel shirt neatly tucked in, brand new boots, leather gloves, safety glasses, and a hard hat?
Haha, love the comment!!
Poor installation, you did not observed the handle being sunk into the trim. The top nailer on the inside should NOT be nailed in the event that you need to remove the door from the track. Sorry but this is not how is done.
Thanks for your response. I think your idea of just screwing in the backside of your trim, so you can easily take it off to remove the door is a good idea. I've been on my addition project for 5 years and at this point, I simply want to get it done and decided just to nail it.
If you listen to my video, I point out that there's a couple different ways to leave the door jam - with no trim, as you prefer, or a recess, as I prefer. That's what makes us all unique, in a good way. God Bless!
For the door handles - the space for them was meticulously cut into the door - drilling and using a drill metal burr bit - with only a 1/16 inch to spare and then glued the handles into place.