I'm more than familiar with the fitment issue. Got myself Enkei Raijins 18x9.5 +35 and those won't clear the front Brembos without 20mm spacers. But those do look awesome with the spacers. But still got a minor problem with the rear setup. Don't really like how they look without the spacers on the rear but like you said I too don't like to roll my fenders rightnow. But I'm pretty sure I'll roll the rear fenders during the next winter because I've a minor rust issue on both sides so I'd need to paint those anyway. After that I'll get 15mm spacers to the rear also and that'll fix all fitment issues for me.
Yeah man, it sounds like the rears need to be rolled for sure! But once you do that you'll have a flush fitment for sure. I'm thinking about throwing a 5mm on my setup to get it a little more fitted
Subbed. Not sure if you seen my evo but it is the one that was reviewed by Tj Hunt. I sorta wanna start a channel like yours. I might start once I decide on my wheel setup too. Te37 or CCW Classics both same price.
I haven't seen it no, but I'll search for it! I love both of those wheels, but I haven't seen anyone rock CCW's in a hot minute. That's what I would roll with :)
When you test fit the rpf1s did you have a chance to drive with them on? Did the tire rub against the inner wheel well during full lock? Thinking of going back down to 17s
I rolled with them on but didn't have a chance to go full lock because I wasn't running anywhere near as much camber as I would have needed. I would have rubbed straight paint with those things lol
my man, what toicj screen is that? and how was the install, ive had this double din in the trunk of my evo for almost a year now lol i cant find the right radio for the price to put in
It's a pioneer ATH Nav system. The install is a nightmare, but totally worth it! I'll probably get a more updated Nav unit soon, but at least most of the relocation work is done :)
Yes, but BBS > Enkei.. everyone knows that xD... All jokes aside, I think they look mad on the 9s, and it is still a fairly "standard" looking wheel. I still love my TE37s though. Clean look and simple.
I tried the chest mount and I almost think it's to low. All you can see is the steering wheel. But I kinda like the angle where we can see what your looking at type of thing!
Why not get nt03 with a 40 offset they'll clear the back just fine all you need is an 25mm spacer in the front and that's it Lol, and keep up then vidoes 👌🏻
I love the nt03! One of my favorite wheels in the 18x9.5. However, I'm not dropped on coils so I'm limited to how much camber I can run to fit the spacer in the front. The rears should clear with a slight roll, but unless I get coils soon, I'll have to wait on those
Never thought those wheels would look that sick on your evo :O
Thanks man!
The X wheels look clean on your 9. I have a WW EVO X and i love the stock enkeis
They are legit good looking wheels! I just wish they were a tad bit lighter
Thank you for the EVOOOOOOOVLOOOOG! :D
Just for you ;) haha glad you liked it!
mother of god... its a fellow Idaho Motovlogger. I want a sweet car like that :)
8/9 BBS MR rims are worth 2.5 k aud!!! Soz in Australia atm!!!! Used but immaculate examples sell for around this price 2 k to 2.5k aud! #AwesomeVideo
Very nice mang.
Thanks man!
Evo vlog! Keep em up.
Hell yeah man I will!
I'm more than familiar with the fitment issue.
Got myself Enkei Raijins 18x9.5 +35 and those won't clear the front Brembos without 20mm spacers. But those do look awesome with the spacers. But still got a minor problem with the rear setup. Don't really like how they look without the spacers on the rear but like you said I too don't like to roll my fenders rightnow.
But I'm pretty sure I'll roll the rear fenders during the next winter because I've a minor rust issue on both sides so I'd need to paint those anyway. After that I'll get 15mm spacers to the rear also and that'll fix all fitment issues for me.
Yeah man, it sounds like the rears need to be rolled for sure! But once you do that you'll have a flush fitment for sure. I'm thinking about throwing a 5mm on my setup to get it a little more fitted
Yooo that church is like a mile and a half from my house!!
Subbed. Not sure if you seen my evo but it is the one that was reviewed by Tj Hunt. I sorta wanna start a channel like yours. I might start once I decide on my wheel setup too. Te37 or CCW Classics both same price.
I haven't seen it no, but I'll search for it! I love both of those wheels, but I haven't seen anyone rock CCW's in a hot minute. That's what I would roll with :)
have them on my evo 8 love them
Hell yeah! Love the look of them
When you test fit the rpf1s did you have a chance to drive with them on? Did the tire rub against the inner wheel well during full lock? Thinking of going back down to 17s
I rolled with them on but didn't have a chance to go full lock because I wasn't running anywhere near as much camber as I would have needed. I would have rubbed straight paint with those things lol
my man, what toicj screen is that? and how was the install, ive had this double din in the trunk of my evo for almost a year now lol i cant find the right radio for the price to put in
It's a pioneer ATH Nav system. The install is a nightmare, but totally worth it! I'll probably get a more updated Nav unit soon, but at least most of the relocation work is done :)
If you were going Evo X MR wheels, why not get the Evo X BBS ones as opposed to the Enkei?
Honestly just not a fan of the Evo X BBS looks
Yes, but BBS > Enkei.. everyone knows that xD... All jokes aside, I think they look mad on the 9s, and it is still a fairly "standard" looking wheel. I still love my TE37s though. Clean look and simple.
Aye, what's the intro song? Lol
When you do these vlogs do use a head strap for your camera??
Yep, just a go pro head strap. I might pick up a chest mount if it gives me a better angle
I tried the chest mount and I almost think it's to low. All you can see is the steering wheel. But I kinda like the angle where we can see what your looking at type of thing!
why dont you try some volk rays te37 sl they would look astonishing on your evo with a red label
If I had an extra 2.5k lying around, I would love to!
xD i agree they do cost alot but hell man they look really good the eenkis are pretty good too good job.
I find it funny that everyone thinks you need $2,000 worth of wheels to make a car look good.
Why not get nt03 with a 40 offset they'll clear the back just fine all you need is an 25mm spacer in the front and that's it Lol, and keep up then vidoes 👌🏻
I love the nt03! One of my favorite wheels in the 18x9.5. However, I'm not dropped on coils so I'm limited to how much camber I can run to fit the spacer in the front. The rears should clear with a slight roll, but unless I get coils soon, I'll have to wait on those
ALLDAYANTHONY oh yea I forgot hahah I'm doing a new wheel setup this winter!
do u need spacer for the evo x rims ?
Nope. No spacers or fender work needed. I think a 5mm would make them a flush fit though
Cool thank for the info
song name?
Kali Uchis - Ridin Round!
have them on my evo 8 love them
Right?? Good looking wheels on an 8 and 9!