Build Breakdown: 8 Second 5.3 SBE Turbo LS Mustang. 8.6@160mph
Вставка
- Опубліковано 11 січ 2021
- Break down of my 1987 fox body
blacksheepindustries.ca
/ truenorthturbos
www.performance-world.com
FOLLOW US ON INSTAGRAM!
Brian 02 RCSB 4.8L/88mm/TH400/8.8 / bgerhardt1
Trey 73 C10 6.0/92mm/TH400/8.8 / twalkerwelding
Bob 95 F150 4.8L/88mm/TH400/8.8 / turbotime1995
Russ 87 FOX 5.3L/88mm/TH400/8.8 / rustytuned - Комедії
That is so much faster than I would expect that suspension of being capable of. I'm really Impressed while also being a little scared for you. Lol
Very nice build! My son is building a 5.3 for his 91 hatch!MMS suspension and 8.8 rear 4:10 gears
Love the videos! Keep it up, you have no idea how many people you inspire to get out and go work on something!
Being about it!
Seems like a solid build with plenty of potential for upgrades
Hopefully closer to the 7s this year!
built ford tough with Chevy Stuff!
Teach me how man👌🏻. I need to keep the turbo sitting on the passenger side and downpipe to go near firewall and back forward to exit before the front tire. A tight fit on this foxbody
My original build was on the side check out my Instagram I have pictures on there
@@savagerb28 will check it out, hope you can help me with a few questions latter if you have time. Thanks
I dont comment much on peeps vids, but my hats off to you. She aint pretty but the numbers dont lie. You show a solid chassis with a legit junkyard build can put down the times. I had a 15k+ sbf(dart 363,novi 2k,igloo) that couldn’t hold a candle to this. Im honestly done with sbf and will be doing a ls the next go around. Great breakdown, be safe, and keep posting
Thanks man I appreciated it!
Your sbf really cost 15k to build with the engine and forced induction?
How did you build your front end? Did you use chromeoly or mig it?
Curious how much timing your running up top on E with what did you say, 24# of boost? I'm guessing 10-12*?
Runs around 28psi. timing 19 degrees at 7600rpm
What rear gear?
pro ratchet is my favourite as well. can’t believe it’s not way more popular. what intake you running?
This has a shit ls2 intake haha
For some reason I didn't think the sloppy trans brake was good for this amount of HP. I'm doing 115 in the quarter in a 3600lb street car. Gonna have to wire this up. I like the arcade buttons too. Cool car.
Turbo 400 and proper brake is the best bang for buck to go faster
@@savagerb28 I gotta keep the 4l80e in mine since i love a chill street car. But yeah you're right
What injectors, valve springs, push rods, rockers? Might have missed that. I didn't realize you already had the Walmart football in the spring & it still rolled like that. Yeah, anti- roll bar & you seem to have a car to good to call sloppy.
Bosch 210s ,trick flow Duals and stock push rods and rockers and lifters. 7600 rpm haha
Whats the cheapest and easiest way to run the stock ecu with this set up? I have seen guys running piggyback computers with there stock ecu , have you tried turbo carb set up before?
In the end it’s not even worth going stock ecu honestly you will spend the same amount of money for an inferior ecu setup.
What diff gearing you have in the 8.8?
3.55
What drive shaft are u using?
3” Chromoly just had a it made at a driveline shop
What rear gear do you have
3.55
What tire size are you running back there?
Pro bracket radial 28x10.5
@@savagerb28 wow with no tubs?
@@andrewwhalen25 no tubs
Lol your missing a bolt for the rear left lower control arm!
Do you guys do tuning?
Depends what it is but mostly we just do our own tuning and also do some ls swap stuff as well.
@@savagerb28 I live just in Calgary did ls swap in my 95 mustang brought it to 2 different tuners and doesn't seem like it's good im new at all this so was just curious, because the power and torque are so low
@@joshbrunet9079 what’s the setup? Trans? Drive by wire or cable? Factory ecu?
@@savagerb28 I sent you a dm on Instagram
Do you put ring gap? Maybe thats why you're blowing up motors🤷♂️
End gap doesn’t bend rods ,butting rings breaks the ring lands off. We don’t have that issue on ethanol.
Ring gap doesn’t bend rods detonation does
hrmmm large shop....many videos....no shop burnouts....questionable if we should continue to be friends or not hahahaha
Hahaha we got a nice road out front for that!
@@savagerb28 yes you do..... i hear it when im at the shop all the time hahahahahah, i should come do some 4low 4x4 launches with my cruiser one day with you guys :D
@@RunningJoe wheelie?
@@savagerb28 you know ive never tried on road hahahahahaha, im sure if I launched it hard enough itd be close, I have VERY soft suspension so its easy to load
@@RunningJoe should at least pull a tire haha
😮 not that fast
Real life jimmy neutron