Code: B10F1-14 Ignition Switch Replacement 2011-2019 Ford Super Duty Standard Motor Products USA431
Вставка
- Опубліковано 27 тра 2022
- Here we replace the ignition switch in my 2011 Ford F250. I have had the new battery go dead on me a few time and hop it might be related to the ignition switch going bad.
Donations:
www.paypal.com/paypalme/SABSG... - Розваги
Thanks this was super helpful. I’ve had the code for a while and my mechanic said I could ignore it. My battery keeps going dead and my starter went dead last week. So I’m just gonna replace this in case it’s related. Great video and I appreciate it.
Thanks, I am not sure if it was related but my battery has been fine since. So It's worth a try! Good luck! 🍻
Good diagnoses and repair.
Thank you sir!
Appreciate the video!
Great video. Thanks
Thank u
I had this code and changed out that part and it did not fix it. When I turn my key on my dash lights flicker and a clicking sound comes from the engine compartment and no start. I tried the passenger side fuse box where the clip is coming loose and that's not it either. I'm at a loss.
Does the new ignition switch come with new keys for it or is this a separate piece that I need for the key since I have no key for the truck I’m buying.
Bummer you don't have a key... but no, this is just the ignition switch. You will need the ignition lock cylinder and keys, then the keys will have to be programmed. Good luck.
@@SABsGarage my normal keys will still work after this repair right?
In my Ford F150 MY'13 have the same issue with code B10F1-14, but everything works normally, alarm when door open etc... anyway i replaced the Ignition Switch sensor as on the video and I still have the same error code, any idea what is it? In error procedure are only two cases, one when no alarm of door open when key in ignition or another alarm warning without key in ignition. In my case works normally allarm when door open and key in ignition, only error code...
UPDATE - the problem was with ignition key cylinder. The cylinder was loose and when it vibrated, it sometimes lost contact and the computer recorded an error.
Sorry, I do not. I would have to do some research to see what it could be. Sounds like an odd issue.
I have the same issue (code) with a 2015 Fusion. Most of the searches though only yield the F150 but I went ahead and changed the ignition switch like in this video, also to no avail. The code when cleared came back. Everything seems to work though.
Did it stop the key from turning into accessory mode
Not that I remember. Everything acted normal except for the code and battery kept dying.
how much does it cost?
$20-$60+ Depending on where you get it.
@@SABsGarage done.. now i have another issue... b1124:09-08.. i could not find it online or how to solve it
did the truck ever start back up?
Yep, This fixed it and haven't had an issue since.