Відео

Great video. Ive git a pro 026 Ive got to do

I’ve got a 2011 F-150 with this same issue. Chime comes on only when you push in on the key, no accessory mode, and the fuel pump kicks on whenever you move the key into different positions but it starts and runs just fine. Just ordered a new ignition switch, so hopefully all goes well!

Not sure what's up with my new strut but the 3 bolts will go up top but then the mounting bottom bolt bushing is turned the wrong way for the 21 mm bolt to go through. Do the tops or bottom mounts rotate or twist? Or are they specific to driver's and passenger side?

I agree. I did one of 4 tires so far it tool me forever. I took the screw out of the sensor it took me forever to get it back together. I went and bought that little tool to just pull it through with. Good video!

Any ideas.. I have a 2012 F250 super duty that is having AC issues. I have replaced the BCM twice and everything AC wise is supposedly working by 12 different mechanics multiple dealerships New AC relay and I still don’t have cold AC.

Nice detail on the rebuild…

Everything was bad wondering if someone caused some of it trying to fix it then gave up

You’re are awesome man thank you for this video

what type of steel did u use?

Is this tractor designed to free wheel down hill while in drive? I test drove one today and it rolled to fast downhill "in gear" had to use the brake to slow it down. Is that normal? It also needs friction plates!

Thanks man, great video! I’m Gonna get me the bead popping tool and that fisher. All these other videos make this process look hard.

There's two marks on flywheel how do I tell which is for forward or reverse?A n are you saying to put fly wheel on mark an set points maybe 25 thousand

nice explication thanks

My handle held on by same flat head screw..

Wow, great work! It would seem that something on the car must be pretty bent to have it be out so much.

Getting ready to tear into one of these. These videos are extremely helpful. Thanks

Lots o' soapy wata! ... I have a bead popper coming on saturday but if i ordered one of them sliders it be here tomorrow! ... :D

Where did you purchase the rebuild kit. Ihave a 30 year old AR pressure washer pump that is leaking oil.

Since it is a press fit how did you get the bearings out? I have some water in the oil so I bought the oil seals. Is it possible to get the seals out of the cylinders without pulling the crank and rods out?

After spider is replaced and the pump coupler is moved up to the motor coupler, it looks like they butt up to each other. Is there suppose to be a small gap (.02) between the two ? Any negative repercussions either way ? I'm going to try this and if there is a way to screw it up, I'll find it.

The section above the 2 capacitors and the number 470 on my board is dark like its burnt so im guessing i have to order the entire board but the tv still looks brand new.

I have an annovi rcv3g27 that was working fine. Now I pull the trigger and the motor dies. If pressure is turned down it works fine. Any suggestions

This is a great video. I know it’s over a year old but it is great . I’ve sense built three of these they are really easy to do and the seal kits are cheap. Thank you sir for the great work gave you a sub . Be safe brother

I have a 1973 Harleydavidson golf cart

nice job!

Nice safety gear😂

Nicely done 👍

Cracking job!. How refreshing it is to hear dimensions in inches and weight in pounds and ounces instead of all this metric rubbish like here in the UK. Just subscribed .

The alignment pin was a brilliant idea. Great work as usual.

Nice tray, I have the same exact band saw. What model number is yours? Mine has no information on it. Thanks.

Great series! Didn't notice any movement / rattling coming from your brake assembly - just purchased a Harley cart built in 1975 and I can jiggle the brake assembly, though the brakes still work. Looks like I just need to tighten things up. Did you happen to take any videos of reassembling the brake?

Lol. I’m the kind of guy who wants a three wheel Harley golf cart so I can tell people I ride a Harley trike. lol lol

This is a very helpful video and the man behind the video is very knowledgeable and explains the how to great. Thanks Mr.

I need a are filter too . How to know what filter get

I ordered a fuel line that was to big so I had to fabricate my own

Picked a026 2 weeks ago got it running good

Just found your channel and subscribed. Nice work. Good looking shaper

Best one yet.

Wow, that's easier than I thought. My suspension has gone bad in my '08 Colorado, Im planning on buying some bilstein shocks for the front and rear end.

Great and informative video. All of them have straight head screw on the handle. Too bad it's not a pro version with little extra power, but still I bet you fell in love with her.

if you could mass produce those I bet there are alot of saw owners like myself who would buy one I use a mister nozzle and it works but not as good as flood one thing I did was cut a pice of 2x4 wood sawed a kerf in it deeper than the saw blade and just let ride on the blade up at the front guide it wicks some of the chips and coolant off before it goes to the front drive wheel I guess u cold put it in a bracket with a clamp to adjust the pressure it puts on the blade it does wear little

🥱💤💤💤😴

Nice job sir thanks for the video I'm about to do that on my 2006 canyon .

Definitely the red cap is only a shipping cap, it needs a vented cap fitted, because it will pressurise the case if not. Seen lots of videos on these pumps... Great video explains a lot...

how hard would it be to do it on a low profile tire?

I have always just kept the guards on and drive the front wheels over the mower deck. Easier than dragging that heavy deck out the side IMO.

Why would you think my harley cart would be going just fine in reverse, but will not engage forward until WOT

AWESOME video! I 'm just getting ready to rebuild the primary clutch on my 72 Harley 3 wheel cart... Straight forward explanation, right down to refilling the lube. .. VERY HELPFUL! ... A+

Great work! My recently inherited 16-G is barely moving forward and this is exactly what I was looking for. Now just waiting on the part to arrive!

Can you replace the tpms with a regular valve stem? I have newer wheels on an older car.