Man, I have been in my current soul sucking career for the last 22 years. I would absolutely love to get out of it and do something different but i have no skills and no extra money and a family to raise. I have recently found wood working and have free access to many necessary tools, and an endless supply of free pallets. I don't care if I make any money at it, I am finding it so refreshing to learn it, at my own pace. My littlest one, my light, loves to join me in the shed as well. I only recently discovered your videos and I thank you for them. They are a blessing through a very mentally difficult time for me. Thank you for being so encouraging dude. You rock.
Small steps. Make small things that match your skill level and try things that are a bit more challenging to enhance your knowledge. Remember you learn not only from succeeding but also from failure. If something does not go right work through the problem. What went wrong where? Be careful of pallet wood and stray nails or embedded metal.
@@shawnr771 thank you so much for the advice. I am definitely learning just by using. As a musician I understand the slow and steady process of success by failure..XD. As for the pallet wood, I disassemble them with a crowbar and or skill saw, I pull all of the nails. Never thought of the potential of stray metal. I have a metal detector so maybe I will go over the wood with it just to be sure.
@@johnsonfamily889A stack of strong magnets will find anything that is ferrous. I use Rare Earth magnets Neomydium(sp). Used to be able to buy them at HD in the fastner section. But they have been out lately. If you do get them do not let your little ones play with them. When they attract they attract and can pinch skin. Larger ones will make you bleec they are not toys.
Hey Johnson Family. I agree with Shawn! And don't say you have no skills... say I'm learning a new skill. Keep negativity out of your life... even with something as simple as wording. You mentioned your little one joining you in the shop... That... is... awesome! And the best motivator a parent can have. If nothing else learn so that you can teach. So great to have the use of the woodworking equipment and pallets. Find a beginner project and get to it. Learn as you go and push yourself to grow every day... you'll see that it changes your whole outlook on everything. Great to have you here!
@@MatthewPeechWoodworking I am learning a new skill. That sounds so much better than how I saw it, I am typically a "glass-half-full" kinda guy. Thank you again for the words. My little light loves to be with me and if I can show her a thing or two and then she takes it to the next level, then I'll feel I've done well as a parent! I have my first assignment from my wife; a headboard for the bed. We shall see how it turns out! Can't wait for your next video!
Absolutely love it. "The only thing I can't do is things I haven't tried" I've recently just started doing some great woodworking projects. Starting off small as the only real experience I've had is cutting dimensional lumber for construction purposes. I have been watching a lot of your videos, and you all on your own, have been an inspiration to me. For that I thank you!
This is one of the best woodworking channels out there. Straight forward, simplified, well explained info. Not to wordy and over done! Glad I found it! Keep it up
Thanks for this video. Ive got so many ideas for projects. From beer caddies to wine racks to charcuterie boards. Just finding the one or two ideas that stand out. I guess its the fear of not succeeding thats holding me back. Ive started woodworking with in the last 5 years so still learning about woodworking. But have so many ideas that I've seen on UA-cam and putting my own twist on them. Thank you for the encouragement to push myself to try something new and succeed in what I love to do with woodworking. God bless and keep the video's coming. 👍
Thanks for watching Juan! Ok so here goes... never fear failure!!! In this you never fail... you learn from what might not have worked and then you grow from that knowledge. I have had many "lessons" over the years... but never a failure. You've got this man. Get to work!
This is the video I needed right now. Just started making and selling things and this video hit just right at just the right time. Thank you, new subscriber for sure, keep up the awesome tips for us trying to do what your doing! I appreciate the information and behind the scenes help we all need.
Hello Matthew, I just wanted to take the time and comment on one of your videos. For a couple weeks now I have been spending a lot of time absorbing the information you provide from your channel. I haven't found what I wanted to say until I watched this video of yours this morning. You have helped me to discover a passion of mine and rekindle a drive I may have forgotten in my young adulthood. I am currently 27 YO working at a chocolate factory making ends meet but obviously not doing something I love. I have always had an interest in carpentry/woodworking not pursuing doing so because lack of mentorship as well as funds. Being autistic has also had challenges in store for me, though I'm very ambitious and detail oriented I have always struggled with getting started with something new like the information was not given correctly or withheld from me. The way you teach woodworking has really caught my interest and I'm learning a lot so much even though I can't yet put it into practice. You genuinely care about your subscribers weather they can be successful in this line of work. The way you talk about motivation is so great buddy it is definitely noticed I'm sure I speak for others when I say I appreciate your content and will share my work with you once I can get my tools together if that is alright with you. Message me sometime if its appropriate I ask you for tips and advice one on one. Thank you so much for your time :D
Love your work mate, just remember you can be as successful as anybody else can be. With the right attitude even autism can be a strength! You can teach yourself anything, especially with guys like this on youtube. Being detail oriented is also a strength, I can imagine you selling super high end stuff one day. God bless lad
Thanks Matthew ! Nothing wrong with the DIYers starting to make money on the side, unfortunately some or most UNDER PRICE their item's and don't understand that profit isn't a bad word...in doing so they KILL the market for those of us that make a living from doing our craft . Great to let them know about material cost , tools, time etc. We have a family run sign/wood working shop and its painful to see an item that we have factored in ALL the costs and sell an item say for 250 - 300 dollars and they do a similar item for 50...We see it often and after doing the breakdown knowing ALL cost involved they are working for 10 cents an hour. Keep up the great work/videos Hello from Canada @canadawoodworksalliston
Thanks and welcome! Yea that has been an issue since everyone seems to be buying equipment... I believe they buy on credit... realize the market is flooded... and have to just try to make a payment. It kills the market for everyone! What you have to focus on is changing your items up... they have copied your item and now your being forced to change it... So shake it up... get creative... think outside of the box! Do what most others cant... be different. Thanks for following!
Another aspect of low prices that a lot of people aren't keeping in mind...... CNC machines. So many of those "low" prices are directly connected to mass production. I absolutely hate that someone can make the same thing I do without any work and in 1/10th of the time. That is what kills people who do woodworking, not a person that's trying to get in the game by selling low to start off.
I’ve been watching your videos for quite a while, and I have enjoyed all of them. Thank you so much for inspiration, ideas, and the confidence building. Look forward to seeing more videos. Thanks again.
I build kitchen cabinets in an area where nothing but trash cabinets are in almost every newish house.. Mostly I replace MDF doors and drawers with real wood.. Easy to make, cheap and they sell well.. Another thought..If you're looking for machinery, saws. drill presses, planers, etc. Be willing to travel your entire state or several states. I've bought a joiner, bandsaw, planer, dust collection system and other items all from craigslist for pennies on the dollar because I was willing to spend an afternoon driving.. Same goes for supplies if you can find a good enough deal. I buy kiln dried cypress for about $1.50 per BF, but I have to go get it.. Same boards I buy sell at the hardwood dealer in town for 8 times the price..
So glad I found your videos!! Just the inspiration I needed to get out of my own way and start making money doing what I love!! Woodworking isn't just for men 🤪
I love that you say the only thing you can't do (besides having babies) is what you haven't tried. My favorite quote is posted where I see it every day, is: I'm always doing what I cannot do in oder to learn how to do it. - Vincent van Gogh
Thank you sir for relighting the passion I once had with woodworking!!!! And then I saw this video and it was just what I needed to build the next project that I has been himmin and hawin over CHEERS BROTHER
Inspirational... I have built a few end tables for my own home, and tried to learn along the way... After subscribing top your channel and watching many hours of your videos, I am going to start making small items to sell locally and perhaps online
Fascinating, interesting and informative. Love all your videos. So. Constructive with your true wisdom. Thank you so much for being so generous for sharing with us. What others do not reveal the knowledge and tricks of the trade. 👏✌️🇨🇦
Hey Matthew just stumbled on your channel, I’m currently in the process of building my own wood shop, I like most would love to turn it into a side business. I just watched your 5 most profitable projects video and you have given me some great ideas. Just subscribed and looking forward to your new videos and catching up on your old videos.
Just smashed the sub button!! I've been doing driftwood projects I used to do it for fun but everyone's wanting me to do one now. It's mostly time . Sanding staining poly and boat riding looking for nice pieces to work on.
Matt as usually nice video and advice. I sell a lot at craft shows and have a hard time getting good money for stuff. I love it when someone wants a item that is bigger then I normally make because they will pay a lot more for it.
I will do a video on craft shows. Theres a different marketing strategy for those. Smalls are the key. $20 or less and have demos of at least one of your big items... will get people asking "can you make..."
You show a lot of passion and pride in what you do. That’s awesome! Well done. I’ve been thinking about carpentry for a long time since I was a young teen, grandfather was one and wanted to be my own version of him. Some people need to hear that passion in what you do matters more than the money and I think you incorporated that very well into your message.
Why thank you Jake. I do love what I do. And you're right... its not always about the money. Thats why I mostly do single pieces that I can put an artistic twist to. And when I want a little extra cash I do my thing. Stop thinking about it Jake... Its time
I've been creating and making original wood and metal pieces of all types for 50 years and your advice on pricing can apply broadly to custom work. If I spend time conceiving and making a one of a kind piece there is still a market limit on what I can charge for it
Fuckin right man. I got real sick with Covid and gave up a decent job I had running a retail store. Had the job 8 years, was great at it. Couldn't keep doing it, it was killing me. Now I'm starting out in woodworking. I feel I'm doing great work. Doing different work that looks great! When people buy it they tell me they're buying it because it looks great. You got it right. I'm glad as hell I found your channel. I learned a bit ago that you can make what everyone else is making all you want and youll have a house full of stuff you made. But if you make stuff you want to make, put yourself in it, you'll make money. That's what I'm doing. Why would I be doing it if I didn't bring anything special to doing it. Thanks man. Gotta keep the fire going.
I always find it challenging to determine how long it will take. So I take cost, rounded up, times 4 or 5. That don't always work , but for me, It works 90%of the time.
Great advice at the end their bud! I learn more from mistakes than anything else but it helps to recognize that vs getting discouraged and give up. Keep truckin' forward:)
@@MatthewPeechWoodworking Took me a long time to start seeing that. I used to think the Universe was out to get me lol. Now I know it was just trying to teach me.
I find it strange people are willing to pay when shopping on Etsy or elsewhere. But when I sell on craigslist or nextdoor, they don't see me as a business and want to pay 1/3 of the price online. Like buying directly from the maker, they want to pay for the true cost of the item and 2/3 of the online price is overhead
thanks so much; i needed to hear that. i’m new at this, but you were by far the coolest I found on UA-cam for woodworking channels. Come see us down here in Duck Dynasty country. we’ll put u on to a nice Louisiana buck.🦌
8:45 becides having a baby! Hahaha right there with you Matt... made 4 and have 5 and called it quits... Monday 1/10/2022 they are supposed to be coming with my new Steel building 18'x30'x10'... then the build out begins. Can't wait to get back to it...
Good advice, here's another thought, If you are not being turned down for being to ex[pensive half of the time, you are not hitting the middle of the market.
Perfectly said. Depending on what your goal is and if you're doing customs plays a big role in this. I may just do a video explaining that concept in detail. Thanks!
Awesome videos! I definitely appreciate watching them. I wish I didn’t travel 75%-80% of the year. I love working with my hands and would probably love doing something like this to keep me home versus being gone most of the year. Never apologize for your passionate passion for motivation! Keep up the great work.
I just want to thank you for your tutorials and for motivating me to step outside my comfort zone and try something new I've always had an interest in woodworking and I've over the last few months had a little extra money so I've been buying some tools and started trying some simple projects they look a little rough but the more that I play with it the better my skill set gets and I think I'm getting close to try to start selling things on marketplace
I’ve been watching your videos and just realized that I know who you are!! I went to high school with your wife and my wife works with your wife! Love your videos!!
Small cheap projects.... CBG's cigar box guitars. Total cost of material, wood, cigar box, guitar tuners, guitar strings all under $20. Take about 2 hours to make a basic slide box guitar and sell anywhere from $60 to $100!!!! East to make also. Wood making skills from 10 being master builder 1 being brand new its about a 3 or 4 on difficulty.
You're a positive, amazing human, thank you for your beautiful creations, insights, instructions...etc', but this video hit my heart brother. If ya ever get to Canada, lemme know eh! (humour, lol)
Thanks for the emotion and inspiration. I have been finding my passion again doing wood work outside of my day job. Your ideas are always too the point and clear! The community you are building is awesome 👌 I like doing unique styles. Where can I share some of my projects that I have put together? This is the part I am no good at is sharing what I know
"Besides having a baby"....just sprayed my monitor with my drink! Bwa ha ha ha ha ha! A few years ago, I made a beautiful jewelry box for this lady I was seeing. Solid red oak, velvet lined drawers, top notch everything. I probably had $350 in materials in this alone. A couple years later I'm strolling through Walmart or Sam's and see someone jacked the plans, mass produced the same thing I made and was selling it for $40 at the stores. Lesson learned. The girl, yeah she went psycho so I ended up giving it to my mom, who still proudly uses it. Yet another, lesson learned.
"The only thing I cannot do, is the thing I haven't tried" 🤔....... "besides having a baby" 😳 Absolute classic😂😂. Keep up the great work, your videos are informative and inspirational!
Time Value of Money (TVM) is a calculation of future value of today's money at a given growth rate, or the present value of future projected amounts calculated at a given discount rate. It's not related to what labor rate is determined for a person or a job.
People must be more willing to pay more for wood projects than they were about 30 years ago. I built a biplane shelf back then and it was hard to sell them for $35. They were 3-1/2' long made of 1x8 and had a working propeller made of mahogany. When I say working I mean if you put a fan in front of it it would spin.
Hey hey Matthew! Listen, no apologies for the encouragement that you offer on your channel! I think I speak for many of us when I say, keep on keeping on with your vids just as they are, including the "philosophical & psychological" aspects of what you bring to your audience. MUCH OBLIGED! ANT 🐜~💨•°
I tried making cell phone holders that you can turn it sideways you can plug it up and it was a holiday 4th of July and it was red blue with white stars and then never sold
Matthew thank you so much for sharing your videos. You are truly an inspiration. I have ideas and now that lumber is so expensive. I'm looking for a place to buy popular wood and the wood they use for decks. Any suggestions would be great. Thank you again.
Yea thats a tough one. I would check with local mills that kiln dry lumber. They are usually the best for buying "seconds". Other than that your kinda stuck. I get alot of my material from facebook marketplace.
First off, I like your videos. Second, I'm a bit of a logic nerd. I got a bit tripped up on the phrase in this video, "the only things I can't do are things I haven't tried." Did you mean to say, "the only things I can't do are things I WON'T try?"
Pricing is easy. Just look at what everybody else is charging for similar products/work, and then price yours cheaper. That's it, people try to make it way more complicated than it needs to be!
Or make it different enough and sell it for more... there's a little more too it than just underbidding your competition... that's why some items are selling for around cost.
Great video!! I have a question, maybe you or someone can help, I made a custom drawer for a guy that is moving And somehow someone threw out the drawer 🤷🏻♀️. So wondering how to charge for that; it took me 8hrs probably because I was figuring stuff out, but i did have to use my round over bit and a straight bit to make the drawer finish, It’s a 18” x 20” I had the materials and just got pine to make the front, but making the detail was the main thing, thanks!!!
Good info, but honestly, this is mostly common sense. It boils down to simply covering your costs and adding the amount you feel your time and skill is worth.
Hey Matthew -- do I need to setup an account to take credit cards? Can u make a vid about that? Even selling locally - as I plan to do - people just don't use cash all the time. thx
This guy is one of the realist people on UA-cam, he seems very genuine
Thank you!!
Ty very much for taking the time to help me out with what to charge. I have a really bad habit of under selling myself so thank you.
Man, I have been in my current soul sucking career for the last 22 years. I would absolutely love to get out of it and do something different but i have no skills and no extra money and a family to raise. I have recently found wood working and have free access to many necessary tools, and an endless supply of free pallets. I don't care if I make any money at it, I am finding it so refreshing to learn it, at my own pace. My littlest one, my light, loves to join me in the shed as well. I only recently discovered your videos and I thank you for them. They are a blessing through a very mentally difficult time for me. Thank you for being so encouraging dude. You rock.
Small steps.
Make small things that match your skill level and try things that are a bit more challenging to enhance your knowledge.
Remember you learn not only from succeeding but also from failure.
If something does not go right work through the problem.
What went wrong where?
Be careful of pallet wood and stray nails or embedded metal.
@@shawnr771 thank you so much for the advice. I am definitely learning just by using. As a musician I understand the slow and steady process of success by failure..XD.
As for the pallet wood, I disassemble them with a crowbar and or skill saw, I pull all of the nails. Never thought of the potential of stray metal. I have a metal detector so maybe I will go over the wood with it just to be sure.
@@johnsonfamily889A stack of strong magnets will find anything that is ferrous.
I use Rare Earth magnets Neomydium(sp).
Used to be able to buy them at HD in the fastner section.
But they have been out lately.
If you do get them do not let your little ones play with them.
When they attract they attract and can pinch skin.
Larger ones will make you bleec they are not toys.
Hey Johnson Family. I agree with Shawn! And don't say you have no skills... say I'm learning a new skill. Keep negativity out of your life... even with something as simple as wording. You mentioned your little one joining you in the shop... That... is... awesome! And the best motivator a parent can have. If nothing else learn so that you can teach.
So great to have the use of the woodworking equipment and pallets. Find a beginner project and get to it. Learn as you go and push yourself to grow every day... you'll see that it changes your whole outlook on everything. Great to have you here!
@@MatthewPeechWoodworking I am learning a new skill. That sounds so much better than how I saw it, I am typically a "glass-half-full" kinda guy. Thank you again for the words.
My little light loves to be with me and if I can show her a thing or two and then she takes it to the next level, then I'll feel I've done well as a parent!
I have my first assignment from my wife; a headboard for the bed. We shall see how it turns out!
Can't wait for your next video!
Absolutely love it. "The only thing I can't do is things I haven't tried"
I've recently just started doing some great woodworking projects. Starting off small as the only real experience I've had is cutting dimensional lumber for construction purposes. I have been watching a lot of your videos, and you all on your own, have been an inspiration to me. For that I thank you!
This is one of the best woodworking channels out there. Straight forward, simplified, well explained info. Not to wordy and over done! Glad I found it! Keep it up
Thanks! Much more to come!
Thanks for this video. Ive got so many ideas for projects. From beer caddies to wine racks to charcuterie boards. Just finding the one or two ideas that stand out. I guess its the fear of not succeeding thats holding me back. Ive started woodworking with in the last 5 years so still learning about woodworking. But have so many ideas that I've seen on UA-cam and putting my own twist on them. Thank you for the encouragement to push myself to try something new and succeed in what I love to do with woodworking. God bless and keep the video's coming. 👍
Thanks for watching Juan! Ok so here goes... never fear failure!!! In this you never fail... you learn from what might not have worked and then you grow from that knowledge. I have had many "lessons" over the years... but never a failure. You've got this man. Get to work!
This is the video I needed right now. Just started making and selling things and this video hit just right at just the right time. Thank you, new subscriber for sure, keep up the awesome tips for us trying to do what your doing! I appreciate the information and behind the scenes help we all need.
I love hearing it. I'll keep the tips coming.. you keep motivated at meeting your goals!
Same
Hello Matthew, I just wanted to take the time and comment on one of your videos. For a couple weeks now I have been spending a lot of time absorbing the information you provide from your channel. I haven't found what I wanted to say until I watched this video of yours this morning. You have helped me to discover a passion of mine and rekindle a drive I may have forgotten in my young adulthood. I am currently 27 YO working at a chocolate factory making ends meet but obviously not doing something I love. I have always had an interest in carpentry/woodworking not pursuing doing so because lack of mentorship as well as funds. Being autistic has also had challenges in store for me, though I'm very ambitious and detail oriented I have always struggled with getting started with something new like the information was not given correctly or withheld from me. The way you teach woodworking has really caught my interest and I'm learning a lot so much even though I can't yet put it into practice. You genuinely care about your subscribers weather they can be successful in this line of work. The way you talk about motivation is so great buddy it is definitely noticed I'm sure I speak for others when I say I appreciate your content and will share my work with you once I can get my tools together if that is alright with you. Message me sometime if its appropriate I ask you for tips and advice one on one. Thank you so much for your time :D
Love your work mate, just remember you can be as successful as anybody else can be. With the right attitude even autism can be a strength!
You can teach yourself anything, especially with guys like this on youtube.
Being detail oriented is also a strength, I can imagine you selling super high end stuff one day. God bless lad
Thanks alot man, after a long time I quit my job and I want to start with this business by myself. This video was very helpful.
Thanks Matthew ! Nothing wrong with the DIYers starting to make money on the side, unfortunately some or most UNDER PRICE their item's and don't understand that profit isn't a bad word...in doing so they KILL the market for those of us that make a living from doing our craft . Great to let them know about material cost , tools, time etc. We have a family run sign/wood working shop and its painful to see an item that we have factored in ALL the costs and sell an item say for 250 - 300 dollars and they do a similar item for 50...We see it often and after doing the breakdown knowing ALL cost involved they are working for 10 cents an hour. Keep up the great work/videos Hello from Canada @canadawoodworksalliston
Thanks and welcome! Yea that has been an issue since everyone seems to be buying equipment... I believe they buy on credit... realize the market is flooded... and have to just try to make a payment. It kills the market for everyone! What you have to focus on is changing your items up... they have copied your item and now your being forced to change it... So shake it up... get creative... think outside of the box! Do what most others cant... be different. Thanks for following!
Another aspect of low prices that a lot of people aren't keeping in mind...... CNC machines. So many of those "low" prices are directly connected to mass production. I absolutely hate that someone can make the same thing I do without any work and in 1/10th of the time. That is what kills people who do woodworking, not a person that's trying to get in the game by selling low to start off.
I’ve been watching your videos for quite a while, and I have enjoyed all of them. Thank you so much for inspiration, ideas, and the confidence building. Look forward to seeing more videos. Thanks again.
I build kitchen cabinets in an area where nothing but trash cabinets are in almost every newish house.. Mostly I replace MDF doors and drawers with real wood.. Easy to make, cheap and they sell well.. Another thought..If you're looking for machinery, saws. drill presses, planers, etc. Be willing to travel your entire state or several states. I've bought a joiner, bandsaw, planer, dust collection system and other items all from craigslist for pennies on the dollar because I was willing to spend an afternoon driving.. Same goes for supplies if you can find a good enough deal. I buy kiln dried cypress for about $1.50 per BF, but I have to go get it.. Same boards I buy sell at the hardwood dealer in town for 8 times the price..
Thanks for another amazing pep talk video!
So glad I found your videos!! Just the inspiration I needed to get out of my own way and start making money doing what I love!! Woodworking isn't just for men 🤪
I do appreciate the pep talk, and the reminder that it's not gonna be easy all the time, but you hang in there, it'll be worth it.
Don't apologize for inspiring us, we need the motivation as.much as we need the know how! Love you and your channel!
Thanks Matt, as someone starting out in my woodworking career this information is very helpful 👍
Dont apologise for havin passion!!
No worries! Glad you liked it!
I love that you say the only thing you can't do (besides having babies) is what you haven't tried. My favorite quote is posted where I see it every day, is:
I'm always doing what I cannot do in oder to learn how to do it. - Vincent van Gogh
I dig it!
Thank you sir for relighting the passion I once had with woodworking!!!! And then I saw this video and it was just what I needed to build the next project that I has been himmin and hawin over CHEERS BROTHER
Inspirational... I have built a few end tables for my own home, and tried to learn along the way... After subscribing top your channel and watching many hours of your videos, I am going to start making small items to sell locally and perhaps online
Love your passion for your work and helping people!
Fascinating, interesting and informative. Love all your videos. So. Constructive with your true wisdom. Thank you so much for being so generous for sharing with us. What others do not reveal the knowledge and tricks of the trade. 👏✌️🇨🇦
You don’t need say sorry I am 57 just getting in to this wood working and you help me a lot this will keep me going thank you
Hey Matthew just stumbled on your channel, I’m currently in the process of building my own wood shop, I like most would love to turn it into a side business. I just watched your 5 most profitable projects video and you have given me some great ideas. Just subscribed and looking forward to your new videos and catching up on your old videos.
Welcome Randy! Get ready for a mix of business and builds!
Great info and especially the passion at the end. Thank you
Just smashed the sub button!! I've been doing driftwood projects I used to do it for fun but everyone's wanting me to do one now. It's mostly time . Sanding staining poly and boat riding looking for nice pieces to work on.
Thanks for the sub! Thats so awesome and an awesome way to think outside of the box to create something unique!
So true Matthew! so true buddy! I always enjoy tuning in brother. 👊
Thanks man. Glad your enjoying the content.
Matt as usually nice video and advice. I sell a lot at craft shows and have a hard time getting good money for stuff. I love it when someone wants a item that is bigger then I normally make because they will pay a lot more for it.
I will do a video on craft shows. Theres a different marketing strategy for those. Smalls are the key. $20 or less and have demos of at least one of your big items... will get people asking "can you make..."
You show a lot of passion and pride in what you do. That’s awesome! Well done. I’ve been thinking about carpentry for a long time since I was a young teen, grandfather was one and wanted to be my own version of him. Some people need to hear that passion in what you do matters more than the money and I think you incorporated that very well into your message.
Why thank you Jake. I do love what I do. And you're right... its not always about the money. Thats why I mostly do single pieces that I can put an artistic twist to. And when I want a little extra cash I do my thing. Stop thinking about it Jake... Its time
I've been creating and making original wood and metal pieces of all types for 50 years and your advice on pricing can apply broadly to custom work. If I spend time conceiving and making a one of a kind piece there is still a market limit on what I can charge for it
Very true.
I'm glad I came across your channel. This is what I have needed for so long, how to start, what to charge, how to create. That you for doing this.
💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾 Builder Life 💙... Great Info as always
Fuckin right man. I got real sick with Covid and gave up a decent job I had running a retail store. Had the job 8 years, was great at it. Couldn't keep doing it, it was killing me. Now I'm starting out in woodworking. I feel I'm doing great work. Doing different work that looks great! When people buy it they tell me they're buying it because it looks great. You got it right. I'm glad as hell I found your channel. I learned a bit ago that you can make what everyone else is making all you want and youll have a house full of stuff you made. But if you make stuff you want to make, put yourself in it, you'll make money. That's what I'm doing. Why would I be doing it if I didn't bring anything special to doing it. Thanks man. Gotta keep the fire going.
One man says he can. One many says he can’t. They are moth mostly correct! I can!!
Great advice mate self doubt is my biggest problem thanks you so much... Hi from Australia by the way 😊
You are a real asset to work workers. Thank you.
Another great video. I enjoy seeing the passion you have for helping others and would enjoy more content like this. Thanks for the advice
Plenty more to come!
I always find it challenging to determine how long it will take. So I take cost, rounded up, times 4 or 5. That don't always work , but for me, It works 90%of the time.
Love all you're videos!
Great advice at the end their bud! I learn more from mistakes than anything else but it helps to recognize that vs getting discouraged and give up. Keep truckin' forward:)
Heck yea! Thats how we learn. There are no mistakes... only lessons. Some are learned the hard way.
@@MatthewPeechWoodworking Took me a long time to start seeing that. I used to think the Universe was out to get me lol. Now I know it was just trying to teach me.
I find it strange people are willing to pay when shopping on Etsy or elsewhere. But when I sell on craigslist or nextdoor, they don't see me as a business and want to pay 1/3 of the price online. Like buying directly from the maker, they want to pay for the true cost of the item and 2/3 of the online price is overhead
thanks so much; i needed to hear that. i’m new at this, but you were by far the coolest I found on UA-cam for woodworking channels. Come see us down here in Duck Dynasty country. we’ll put u on to a nice Louisiana buck.🦌
8:45 becides having a baby! Hahaha right there with you Matt... made 4 and have 5 and called it quits... Monday 1/10/2022 they are supposed to be coming with my new Steel building 18'x30'x10'... then the build out begins. Can't wait to get back to it...
Sweet! I have some videos on shop layout if you're interested.
Good advice, here's another thought, If you are not being turned down for being to ex[pensive half of the time, you are not hitting the middle of the market.
Perfectly said. Depending on what your goal is and if you're doing customs plays a big role in this. I may just do a video explaining that concept in detail. Thanks!
Awesome, very accurate lesson on woodworking pricing and life.
Thanks Bobby!
Great motivation man, keep it up bro!
Awesome videos! I definitely appreciate watching them. I wish I didn’t travel 75%-80% of the year. I love working with my hands and would probably love doing something like this to keep me home versus being gone most of the year. Never apologize for your passionate passion for motivation! Keep up the great work.
I like what you're doing here man. Thank you.
Thanks! Much more to come!
Such a helpfull vid at this point of my life, it really gives me a big motivation boost, iam really glad for finding this today!
Much more to come!
I just want to thank you for your tutorials and for motivating me to step outside my comfort zone and try something new I've always had an interest in woodworking and I've over the last few months had a little extra money so I've been buying some tools and started trying some simple projects they look a little rough but the more that I play with it the better my skill set gets and I think I'm getting close to try to start selling things on marketplace
Sound advice brother. Thanks for another great video. Keep up the good work Mr. Peech!
Will do my man!
It’s great to have your perspective
Thanks Jonathan!
Absolutely awesome way to put things in a better perspective. Thank you Matthew keep the videos coming brother✊🏼
Another dropping soon!
Excited to see brother, going to buy me a table saw the weekend, any brand decent? Thought about that dewalt they have for 300
I’ve been watching your videos and just realized that I know who you are!! I went to high school with your wife and my wife works with your wife! Love your videos!!
Whats up Jacob! Small world isn't it. Glad you enjoy the videos! Stop in sometime!
Your info is great.
Good job. Great talk!
Thank you!
Custom(er) or Custom(work). Thats a fine line.
You’ll right bro, I think like you do. Enjoyed 👍
Thanks 👍
Great video!
I just started out and making elevated garden beds.
Small cheap projects.... CBG's cigar box guitars. Total cost of material, wood, cigar box, guitar tuners, guitar strings all under $20. Take about 2 hours to make a basic slide box guitar and sell anywhere from $60 to $100!!!! East to make also. Wood making skills from 10 being master builder 1 being brand new its about a 3 or 4 on difficulty.
You're a positive, amazing human, thank you for your beautiful creations, insights, instructions...etc', but this video hit my heart brother. If ya ever get to Canada, lemme know eh! (humour, lol)
Thanks for the emotion and inspiration.
I have been finding my passion again doing wood work outside of my day job. Your ideas are always too the point and clear!
The community you are building is awesome 👌
I like doing unique styles. Where can I share some of my projects that I have put together? This is the part I am no good at is sharing what I know
You are a huge help man, thanks and keep it up!
Great motivation bud! Thanks! Like the videos!
No worries Norman! And thanks!
"Besides having a baby"....just sprayed my monitor with my drink! Bwa ha ha ha ha ha!
A few years ago, I made a beautiful jewelry box for this lady I was seeing. Solid red oak, velvet lined drawers, top notch everything. I probably had $350 in materials in this alone. A couple years later I'm strolling through Walmart or Sam's and see someone jacked the plans, mass produced the same thing I made and was selling it for $40 at the stores. Lesson learned. The girl, yeah she went psycho so I ended up giving it to my mom, who still proudly uses it. Yet another, lesson learned.
Bananas!!! And thanks for the encouragement at the end. 👊🏻👍🏻
lol. yeaaa I must have been hungry. It just came out.
Liked, shared and commented 🍻
Awesome information!! Thank you for the content!
Thanks and no worries!
"The only thing I cannot do, is the thing I haven't tried" 🤔....... "besides having a baby" 😳
Absolute classic😂😂.
Keep up the great work, your videos are informative and inspirational!
Time Value of Money (TVM) is a calculation of future value of today's money at a given growth rate, or the present value of future projected amounts calculated at a given discount rate. It's not related to what labor rate is determined for a person or a job.
People must be more willing to pay more for wood projects than they were about 30 years ago. I built a biplane shelf back then and it was hard to sell them for $35. They were 3-1/2' long made of 1x8 and had a working propeller made of mahogany. When I say working I mean if you put a fan in front of it it would spin.
simplify it. not every decor wants an airplane shelf.
Not have a baby bahaha, love your videos Peech!!!
Lol. Thanks!
Good stuff right there! Thanks for the great advice.
No problem!
Thank you, kind sir!
No worries!
Matthew- thanks for what you do. You have been a great help to me.
Glad to hear it.... Keep striving for that set goal!
Hey hey Matthew! Listen, no apologies for the encouragement that you offer on your channel! I think I speak for many of us when I say, keep on keeping on with your vids just as they are, including the "philosophical & psychological" aspects of what you bring to your audience.
MUCH OBLIGED!
ANT
🐜~💨•°
Thanks!
Thank you for the video
Thanks for great videos, and thanks for the passion!
My pleasure!
' "Besides having a baby." Hahahahaha Thank you for these videos. They are very informative and encouraging.
I love your content!
I need a collapsible display shelf. One for a table top. Can you make a video on your take of how to make one? Pleeeeaaasse
Good information.
Thanks for helping us.
It's my pleasure. Thanks as always Shawn
I tried making cell phone holders that you can turn it sideways you can plug it up and it was a holiday 4th of July and it was red blue with white stars and then never sold
faith of a muster seed
Your a good motivator.
Thanks Faron. Im just passionate about the trade.
my factor on pricing is cost of supplies (wood screws glue etc.) and how much beer i drink during the build
Matthew thank you so much for sharing your videos. You are truly an inspiration. I have ideas and now that lumber is so expensive. I'm looking for a place to buy popular wood and the wood they use for decks. Any suggestions would be great. Thank you again.
Yea thats a tough one. I would check with local mills that kiln dry lumber. They are usually the best for buying "seconds". Other than that your kinda stuck. I get alot of my material from facebook marketplace.
Inspirational
Thanks Joseph.. I just have a lot of faith in people.
Great idea. I love it👍🏾❤️🙏🏼
Great info
Thanks!
First off, I like your videos. Second, I'm a bit of a logic nerd. I got a bit tripped up on the phrase in this video, "the only things I can't do are things I haven't tried."
Did you mean to say, "the only things I can't do are things I WON'T try?"
Pricing is easy. Just look at what everybody else is charging for similar products/work, and then price yours cheaper. That's it, people try to make it way more complicated than it needs to be!
Or make it different enough and sell it for more... there's a little more too it than just underbidding your competition... that's why some items are selling for around cost.
Passion, baby! If you have it, it’ll help you be successful.
True story!
Great video, as usual! Thanks
Any advise on starting to sell on marketplace? Etsy isn’t working very well
Yes... Im going to do a video about selling online. Etsy has an issue of people paying to be listed at the top. Plus they take 10%. Stay tuned!
Great video!! I have a question, maybe you or someone can help, I made a custom drawer for a guy that is moving And somehow someone threw out the drawer 🤷🏻♀️. So wondering how to charge for that; it took me 8hrs probably because I was figuring stuff out, but i did have to use my round over bit and a straight bit to make the drawer finish,
It’s a 18” x 20” I had the materials and just got pine to make the front, but making the detail was the main thing, thanks!!!
Nice.
Thanks!
Good info, but honestly, this is mostly common sense. It boils down to simply covering your costs and adding the amount you feel your time and skill is worth.
Hey Matthew -- do I need to setup an account to take credit cards? Can u make a vid about that? Even selling locally - as I plan to do - people just don't use cash all the time. thx
How do think out side the box and then do the research , if it's one of a kind.
Thank you!