▼EXPAND FOR MORE INFO!▼ ★ Plans! All plans include exploded views, cutting layouts, and easy-to-follow step-by-step instructions. Etsy Shop: tidd.ly/3DzEa0f ★ Join The Patreon Community! www.patreon.com/MatthewPeechwoodworking ★MPW DISCORD! discord.gg/kYF69Wd8s2 Our Discord is a place where you can chat with like-minded makers, share your brags, and ask questions about anything woodworking. ★ THE BRAG BOARD! Share your brags and view brags from other makers! The brag board has its own discord channel where you can post, view, and comment on builds. Just follow the Discord link above! ★ Subscriber Discounts! (Affiliate links help to sponsor the content) -RZ Masks (Save 15% with code: PEECH) tidd.ly/3TJ1w9q -AXIL Electronic Hearing Protection (SAVE 15% with code MPWOODWORKING) goaxil.com/pages/gs-extreme-affiliatte-special?rfsn=6622602.9d133c ★Links to tools you may see in my shop (If you use one of these affiliate links we may receive a small commission that helps to support the channel) 3/4” Dowel Rod- amzn.to/3sY0PAH 1/4” Jute Rope- amzn.to/3ED9JpQ Leather Strips- amzn.to/3Zh9V7H Dewalt Jig Saw amzn.to/3tGmkUS Diablo Scroll Jigsaw Blades amzn.to/3r6tvXK DEWALT Compound Miter Saw- amzn.to/3fqkIWX DEWALT 20V Max Cordless Drill Combo Kit, 2-Tool Drill Driver/Impact Combo Kit amzn.to/3Kh5OAE Titebond III Exterior wood glue amzn.to/36HHBEx Kreg Pocket-Hole Jig 720 PRO, Blue amzn.to/3trFHkt Craftsman Air Nailer and compressor combo amzn.to/3JLdVVo Craftsman Air Nailer and compressor combo amzn.to/3JLdVVo Drafting pencil amzn.to/3P1x3jY Self-locking tape measure amzn.to/3PhoKBa Kreg 2.5” pocket screws amzn.to/3CBRLCd Sanding block amzn.to/33QqwGH Ridgid Table Saw amzn.to/3KlIPUV Kreg 520 pro amzn.to/3O2qkaW 8” dado set amzn.to/3q24s7x
So I’ve been watching you for a little over a week now, I found your channel after I decided to start making hand router signs, so I went out and bought a inexpensive router, $34 @ harbor freight, and like you like to use, fence pickets are common usage for small sign making, then I found you, you started giving me more ideas for other stuff to make and side hustle, so I went back to harbor freight, and got myself a 10” tablesaw, and a Bauer 20v brad nailer, speaking of the nailer, harbor freight is running a special right now, buy the 20v charger, $39, and buy a 20v 5 amp hr battery, $59 and get the tool free, and the nailer is normally $99. So I really want to thank you for lighting a fire under me, to hustle.
I'm new to the channel. This is exciting and makes me want to cry at the same time. I am a mom, on the downside of that age hill, I've been training dogs for 48 years and still do for my own but not professionally anymore. I have 5 imported longcoat German Shepherds. But woodworking is my hobby. Over the many years, I've collected a nice amount of wood 🪵, oak, cedars, cherry, walnut, mahogany, and purple heart. I had a friend who worked at a place that made custom hardwood doors, and he gave me boxes of scrap wood. I had some trees die, and I dug up the root balls.... a plum, apricot, several aspens, and several apple trees. I saved a nice amount of the trunk as well....allowed it to dry. I do a lot of wood turning, scroll work, carving both power and hand, and some burning. I also just like to make ....stuff!!!! I got a job at a hardware store. Once my kids got into high school just so I could use the HUGE discount to buy tools. Now.....we are moving over 1000 miles. But.....my husband said we are not taking my wood stash. He already tossed my dried tree trunks and root balls. No to my big lathe, big saws, big benches. 🤯🤯🤯 ugggg I looked at your videos and want to get to work making things, but I'm supposed to be packing. 😢 I promise, once I get settled in my new work shop, I'm going to be busy turning wood into fabulous things. Your ideas are super cool. ✏️🔨🪚 🩹 ⚰️ (the coffin is for a certain husband if he goes back on his promise to replace my stuff)😂😂😂😂 I do really love him, and I get his point, the moving truck will only hold so much stuff. Sorry, I vented😊
A good idea for the top of a pumpkin is split up a piece of fire wood into half inch wedges. You can rough up the top part and it looks like kinda real in a way
I love your upbeat attitude, I have 4 more months to work and then I can retire and go to the garage and make stuff and I will be doing a ton of your ideas I have been for years making things for the kids and family but I can see a person can make a buck or two with bit of work but is it work if you love doing it? Thanks for what you do!
Idea on the pumpkin sitters/plaques: make the back boards into rustic tombstone sitters for Halloween. Cut them out just the same as here, only difference would be to not attach a stem, maybe paint them up a differently, and the sayings written on them. So if you have any that didn't sell as Fall décor, maybe pop the stem off and repaint, then market them for October. Or just cut out extras when making the pumpkins and set them aside to make tombstones. It would be really cool if they were reversible, with a somehow detachable stem, so you could display the pumpkin side with stem now, then pop it off for Halloween and flip it around to the tombstone side for next month, pop the handle back on and flip it back around for November. Hope this makes sense, there's a reason I'm not a writer:)
Just ran across your channel over the weekend. Did some bing watching… and then got building.. thank you so much for making these videos. They are so easy to follow and you explain every detail, really do appreciate your style! I made the decor bench to make a display for my crafts to come, it turned out great!! I can’t wait to add some of these other ideas you’ve mentioned to it. 12:19
Hello Mr. Peech, I'm Samuel my friends call me DOC I was raised by a carpenter who actually let me build things and use power tools on my own at age 5 growing up, Freaking 70s baby lol. Anyway got away from it now circling back in life to what was always my heart. Am go8ng to start my own store online, Docs rustic woodwork. It's inspiring to see an interesting and intelligent person and channel now adays. I just wanted to say thanks.keep up the good work. Congrats on your success and cool channel. Thanks again for the designs and ideas I'll keep following. Be blessed.
Your videos are so helpful! I discovered the first one last weekend and my friend and I have been binge watching your videos ever since. Thank you for so many great ideas that have helped us take our creations to a whole new level!
Thank you sir for this content. Your grace and humility will bless you beyond simple recognition.and believe it or not, this is not my normal vernacular. Promise
As always, your videos are awesome and informative. Now that I'm a Patreon member, I will be uploading items to the brag board as well. Keep up the excellent work!!
I've been messing around with printing backwards on wax paper from an ink jet printer to transfer black and some colors to wood. Much cheaper than stamps and stencils
I made two "towel" racks 20 yrs ago for my parents.1 stands in the corner about 4 ft tall and has towels LOL hanging on it in the kitchen. The other is 2ft wide x 7 ft long and hangs flat from the ceiling above the island as a pot rack made from closet pole and 5/4 x 4
i just bopught a hand saw and a phillips screw driver. Going to use a string for measuring until I can get a tape measure. Time to get building. Keep the excellent videos coming. thanks
Thank you for this video, my wife and daughter and daughter in law they love stuff like what you showed us. So when I show them this video I'll be pretty busy building most of them. Also thank you for the video on the feeders my little brother loves his yard rats so I'm making him a couple.
Hola! 🖐I hope you are doing well. I always enjoy your videos because you offer a different way of looking at these projects AND I really appreciate how encouraging you are for others to give them a try. I'll share this with Grammy (my wife) and I'm sure she'll want me to make them all for her. 😂 Take care and have a good one, Adios!👊
Their 3/4 inch material bench is a copy of an old wash tub bench it historically would hold 2 washtubs one with soapy water and clean water in the 2nd tub. after washing you would sun/wind dry the clothes on the line. great video thanks. I had one I got from my mom for years.
On those pumpkin plaques with the phrases on them,,, You could cut different shapes (like Turkeys or Christmas trees) drill a small hole in the handle and run a piece of cord thru the hole to hang them as different holiday decorations! BUILD CHEAP, SELL BIG!! Can't wait to get my shop together, just moved in last week! The ''electrician'' left me ALOT of work to do, half the lights don't even work!!
I do the same thing! I go shopping, see something I want, take a pic of it, then go home and make it out of scrap wood. I had rather make it any day than buy it! Plus I can custom make it to suit ME!
Another great video. I look forward to your videos to see what you've come up with. Thanks to you, I can't pass the decor section of any store without taking things apart in my mind to figure out how to do it better. 😂
Fantastic video as always, so helpful for people who need specific instructions for measurements etc, but also not condescending for those who know what they're doing and just want some inspiration. Now I'm off to try and find the episode where you make that pumpkin you put on the bench 😍 love it and definitely want to make some of those! Im assuming slot joint which if i didnt glue could mean flat packing for posting and season decoration storage. Oh the ideas you've my brain working on! Thanks for sharing 🧡
Am I right in thinking that for the first item we would have to do a glue up of a number of pine boards to get the right size of rectangle before traicing and cutting out the pumpkin shape? Appreciate any input from anyone on this. Thank you.
I just finished one of those squirrel feeder chairs last night. Made it out of scrap tounge and groove blue pine. Any suggestions on a finish? I like the natural look of blue pine.
How do you get the distressed look and also you mentioned about the pumpkin serving trays food based finish what about the painted ones do they make a good grade paint? Thank you I promised myself I would stick to only watching your videos because I get overwhelmed with jumping around all the other Woodworking videos You explain everything and have the build list and plans available to purchase. Thanks again for all you do
Matt don't worry so many people have been building are putting together fall stuff since last month so keep them coming can you do some Halloween decorations 😊 that can go outside or inside thank you❤
Another awesome video Matthew. Love the way you broke and simplified the bench build. I have my eye on a few plans I'm interested in on your site. Thanks for sharing and keep them coming.
That was great ! Lots of idea's. Thank for all your time and effort. Please do forget the dog bowl platform, I really want to see your twist on it, I sold three with dog bowls from Shoprite !
Can you collect some of this into like a document to look at? Loving the channel and videos but its a lot of content to filter through to find the stuff I can do and/or am interested in doing myself. It would be super awesome to have some of this information in a more browseable format.
I'm in the UK. We are still in the process of importing Halloween. Can someone explain to me what a 'pumpkin sitter' is ? What does it represent or do ?
Hi John, it's also called a shelf sitter, so just a decorative piece that will sit on a shelf independently. If you have wood thick enough to stand up by itself your possibilities are endless 😁 one thing I make is blocks of approx 4x4x2" and wood burn sayings/baby names/wedding dates on them. I sometimes add a hanger on the back or hanger attachments in a bag with it so people can choose how to have it in their home
@@BethyS13 Hi Beth, thanks for your reply.. I thought it had some cultural meaning in your part of the world, but now i understand its just another shelf 'dust collector' that is purchased on a whim.. Family and friends are always buying and giving us trinkets . In fact out lounge now reassembles a seaside giftshop.. I prefer 'clean lines' personally. I'd like to box them all up and get rid but that could bring political problems with family and friends. . I'm rather torn about churning this stuff out.. I want the money but I'd be adding to the mountains of the very clutter that I hate ! First World problem Beth ! 😁 Regards, John
Matthew, I love your videos. Keep them coming please. Just one question, you recommend using fence pickets a lot in your videos. My experience with these while building actual fences, is that fence pickets shrink very quickly. Do you allow the pickets to shrink up before using them in one of your projects?
Another awesome video,Matt! Thanks for sharing! I can’t wait to build some of these projects. How did you paint the pumpkin plaque after laser engraving (without getting paint on the letters)?
Love these ideas Matt thanks. Been looking for decent template for the pumpkin trays tbh if anyone can help. Gonna attempt a sided tray in pumpkin shape aswell. Think the pumpkin trays could be pallet wood slats for people. 🏴👍
Your pumpkin looks awesome and their pumpkins are lame. I'm talking about the one you made for your bench. Super cute. And I love the bench being actually useful as a bench. Why would they make a bench that isn't useful as a bench?? These stores are crazy.
I have lots of property to sell on and work on I have a ranch. So I am looking to sell two days a week on reach. Here if you sell two days a week on property it's not considered a business. Really would your input. The economy is getting scary
▼EXPAND FOR MORE INFO!▼
★ Plans! All plans include exploded views, cutting layouts, and easy-to-follow step-by-step instructions.
Etsy Shop: tidd.ly/3DzEa0f
★ Join The Patreon Community!
www.patreon.com/MatthewPeechwoodworking
★MPW DISCORD! discord.gg/kYF69Wd8s2
Our Discord is a place where you can chat with like-minded makers, share your brags, and ask questions about anything woodworking.
★ THE BRAG BOARD! Share your brags and view brags from other makers!
The brag board has its own discord channel where you can post, view, and comment on builds. Just follow the Discord link above!
★ Subscriber Discounts! (Affiliate links help to sponsor the content)
-RZ Masks (Save 15% with code: PEECH)
tidd.ly/3TJ1w9q
-AXIL Electronic Hearing Protection (SAVE 15% with code MPWOODWORKING)
goaxil.com/pages/gs-extreme-affiliatte-special?rfsn=6622602.9d133c
★Links to tools you may see in my shop (If you use one of these affiliate links we may receive a small commission that helps to support the channel)
3/4” Dowel Rod- amzn.to/3sY0PAH
1/4” Jute Rope- amzn.to/3ED9JpQ
Leather Strips- amzn.to/3Zh9V7H
Dewalt Jig Saw amzn.to/3tGmkUS
Diablo Scroll Jigsaw Blades amzn.to/3r6tvXK
DEWALT Compound Miter Saw- amzn.to/3fqkIWX
DEWALT 20V Max Cordless Drill Combo Kit, 2-Tool Drill Driver/Impact Combo Kit
amzn.to/3Kh5OAE
Titebond III Exterior wood glue amzn.to/36HHBEx
Kreg Pocket-Hole Jig 720 PRO, Blue amzn.to/3trFHkt
Craftsman Air Nailer and compressor combo amzn.to/3JLdVVo
Craftsman Air Nailer and compressor combo amzn.to/3JLdVVo
Drafting pencil amzn.to/3P1x3jY
Self-locking tape measure amzn.to/3PhoKBa
Kreg 2.5” pocket screws amzn.to/3CBRLCd
Sanding block amzn.to/33QqwGH
Ridgid Table Saw amzn.to/3KlIPUV
Kreg 520 pro amzn.to/3O2qkaW
8” dado set amzn.to/3q24s7x
So I’ve been watching you for a little over a week now, I found your channel after I decided to start making hand router signs, so I went out and bought a inexpensive router, $34 @ harbor freight, and like you like to use, fence pickets are common usage for small sign making, then I found you, you started giving me more ideas for other stuff to make and side hustle, so I went back to harbor freight, and got myself a 10” tablesaw, and a Bauer 20v brad nailer, speaking of the nailer, harbor freight is running a special right now, buy the 20v charger, $39, and buy a 20v 5 amp hr battery, $59 and get the tool free, and the nailer is normally $99. So I really want to thank you for lighting a fire under me, to hustle.
I'm new to the channel. This is exciting and makes me want to cry at the same time. I am a mom, on the downside of that age hill, I've been training dogs for 48 years and still do for my own but not professionally anymore. I have 5 imported longcoat German Shepherds.
But woodworking is my hobby. Over the many years, I've collected a nice amount of wood 🪵, oak, cedars, cherry, walnut, mahogany, and purple heart. I had a friend who worked at a place that made custom hardwood doors, and he gave me boxes of scrap wood. I had some trees die, and I dug up the root balls.... a plum, apricot, several aspens, and several apple trees. I saved a nice amount of the trunk as well....allowed it to dry.
I do a lot of wood turning, scroll work, carving both power and hand, and some burning. I also just like to make ....stuff!!!! I got a job at a hardware store. Once my kids got into high school just so I could use the HUGE discount to buy tools.
Now.....we are moving over 1000 miles. But.....my husband said we are not taking my wood stash. He already tossed my dried tree trunks and root balls. No to my big lathe, big saws, big benches. 🤯🤯🤯 ugggg
I looked at your videos and want to get to work making things, but I'm supposed to be packing. 😢
I promise, once I get settled in my new work shop, I'm going to be busy turning wood into fabulous things. Your ideas are super cool. ✏️🔨🪚 🩹 ⚰️ (the coffin is for a certain husband if he goes back on his promise to replace my stuff)😂😂😂😂 I do really love him, and I get his point, the moving truck will only hold so much stuff.
Sorry, I vented😊
Are you woodworking again
Thanks Mathew for your willingness to spend the time researching all of these items. Saves me a lot of time that I don't have
No worries! It’s what I love to do. Thanks for supporting the channel!
A good idea for the top of a pumpkin is split up a piece of fire wood into half inch wedges. You can rough up the top part and it looks like kinda real in a way
I love your upbeat attitude, I have 4 more months to work and then I can retire and go to the garage and make stuff and I will be doing a ton of your ideas I have been for years making things for the kids and family but I can see a person can make a buck or two with bit of work but is it work if you love doing it? Thanks for what you do!
Idea on the pumpkin sitters/plaques: make the back boards into rustic tombstone sitters for Halloween.
Cut them out just the same as here, only difference would be to not attach a stem, maybe paint them up a differently, and the sayings written on them. So if you have any that didn't sell as Fall décor, maybe pop the stem off and repaint, then market them for October. Or just cut out extras when making the pumpkins and set them aside to make tombstones.
It would be really cool if they were reversible, with a somehow detachable stem, so you could display the pumpkin side with stem now, then pop it off for Halloween and flip it around to the tombstone side for next month, pop the handle back on and flip it back around for November.
Hope this makes sense, there's a reason I'm not a writer:)
Just ran across your channel over the weekend. Did some bing watching… and then got building.. thank you so much for making these videos. They are so easy to follow and you explain every detail, really do appreciate your style! I made the decor bench to make a display for my crafts to come, it turned out great!! I can’t wait to add some of these other ideas you’ve mentioned to it. 12:19
Great to hear!
😊vary cool
I'm glad to see builds again. I love building and selling benches. The bench you showed is another great idea. Thank you.
That bench is just tooo simple! Set the right holiday decoration on the bench and it'll sell in no time!
Dot on dice are called Pips
I'm sure someone has already commented.
Absolutely love your videos!!!!!!!
You ROCK !!!
Hello Mr. Peech, I'm Samuel my friends call me DOC I was raised by a carpenter who actually let me build things and use power tools on my own at age 5 growing up, Freaking 70s baby lol. Anyway got away from it now circling back in life to what was always my heart. Am go8ng to start my own store online, Docs rustic woodwork. It's inspiring to see an interesting and intelligent person and channel now adays. I just wanted to say thanks.keep up the good work. Congrats on your success and cool channel. Thanks again for the designs and ideas I'll keep following. Be blessed.
My name is doc but nobody calls me Samuel
Thanks!
Thank you!!!
I always look to you Matt for idea's. I'm retired and divorced and your stuff is 'Top notch' ! Thanks for great videos too!
Your videos are so helpful! I discovered the first one last weekend and my friend and I have been binge watching your videos ever since. Thank you for so many great ideas that have helped us take our creations to a whole new level!
Thank you sir for this content. Your grace and humility will bless you beyond simple recognition.and believe it or not, this is not my normal vernacular. Promise
Hi Matthew. My wife showed me your channel yesterday. I immediately subscribed! I've already been inspired.
As always, your videos are awesome and informative. Now that I'm a Patreon member, I will be uploading items to the brag board as well. Keep up the excellent work!!
I've been messing around with printing backwards on wax paper from an ink jet printer to transfer black and some colors to wood. Much cheaper than stamps and stencils
I made two "towel" racks 20 yrs ago for my parents.1 stands in the corner about 4 ft tall and has towels LOL hanging on it in the kitchen. The other is 2ft wide x 7 ft long and hangs flat from the ceiling above the island as a pot rack made from closet pole and 5/4 x 4
This is becoming my favorite channel.
i just bopught a hand saw and a phillips screw driver. Going to use a string for measuring until I can get a tape measure. Time to get building. Keep the excellent videos coming.
thanks
Only posted 18 minutes ago and almost 1k views. Keep up the good work
Thanks! Will do!
I am very happy to support your channel....thanks for the tips, and the smalls...
Big thanks
the artistic cutouts on the legs of your sturdy bench I can imagine could also be an image of a Christmas tree or a pumpkin silhouette
Love Matthew's videos. I have been watching his videos for a while now and even purchased his end table plans from Etsy.
Glad to see you back. I love how I'm learning to use my creativity
Putting a half blind dovetail on the bottom board on the bench would be pretty cool.
Love this channel. Such great ideas! Doing my first craft fair mid October. Very excited! Thanks Matt!
Mathew awesome job. Your personal are always spot on.. easy to understand.
Great vid as usual.. but the secrets out. I saw you lurking around the top secret 3M factory in someone else's vid 😊
Thank you for this video, my wife and daughter and daughter in law they love stuff like what you showed us. So when I show them this video I'll be pretty busy building most of them. Also thank you for the video on the feeders my little brother loves his yard rats so I'm making him a couple.
Hola! 🖐I hope you are doing well. I always enjoy your videos because you offer a different way of looking at these projects AND I really appreciate how encouraging you are for others to give them a try. I'll share this with Grammy (my wife) and I'm sure she'll want me to make them all for her. 😂 Take care and have a good one, Adios!👊
You vids gave me inspiration to get started & begin bringing money into my household again
Their 3/4 inch material bench is a copy of an old wash tub bench it historically would hold 2 washtubs one with soapy water and clean water in the 2nd tub. after washing you would sun/wind dry the clothes on the line. great video thanks. I had one I got from my mom for years.
On those pumpkin plaques with the phrases on them,,, You could cut different shapes (like Turkeys or Christmas trees) drill a small hole in the handle and run a piece of cord thru the hole to hang them as different holiday decorations! BUILD CHEAP, SELL BIG!! Can't wait to get my shop together, just moved in last week! The ''electrician'' left me ALOT of work to do, half the lights don't even work!!
Just made this bench… really easy!! Now just need to figure out the 2x10 punkin
Why not just cut the pumpkin in half then glue your stained wood in between them....add dowels for strength. Good for those without a tablesaw
I do the same thing! I go shopping, see something I want, take a pic of it, then go home and make it out of scrap wood. I had rather make it any day than buy it! Plus I can custom make it to suit ME!
Great job and projects thx for sharing You could decorate the bench for different seasons Like you could add stars to each leg
I've taken a bigger bench used them for wedding benches to use instead of a guest book
In part due to your inspiration, I'm starting my own channel. Thanks for all you do
Thank `you for shareing your creativity, appreciated
Another great video. I look forward to your videos to see what you've come up with. Thanks to you, I can't pass the decor section of any store without taking things apart in my mind to figure out how to do it better. 😂
Fantastic video as always, so helpful for people who need specific instructions for measurements etc, but also not condescending for those who know what they're doing and just want some inspiration.
Now I'm off to try and find the episode where you make that pumpkin you put on the bench 😍 love it and definitely want to make some of those! Im assuming slot joint which if i didnt glue could mean flat packing for posting and season decoration storage. Oh the ideas you've my brain working on!
Thanks for sharing 🧡
Am I right in thinking that for the first item we would have to do a glue up of a number of pine boards to get the right size of rectangle before traicing and cutting out the pumpkin shape? Appreciate any input from anyone on this. Thank you.
I have the same question. PB’s small board is 15x17x1. I hope somebody knows.
I just finished one of those squirrel feeder chairs last night. Made it out of scrap tounge and groove blue pine. Any suggestions on a finish? I like the natural look of blue pine.
18:39 My favorite: 12:10-16:24
How do you get the distressed look and also you mentioned about the pumpkin serving trays food based finish what about the painted ones do they make a good grade paint?
Thank you
I promised myself I would stick to only watching your videos because I get overwhelmed with jumping around all the other Woodworking videos
You explain everything and have the build list and plans available to purchase.
Thanks again for all you do
Any suggestion on cutting the bench leg cut outs on a table saw? I despise the jigsaw and don't currently have a bandsaw.
I've watched a bunch of your vids. Gonna go all in with these and try to sell a version of all of them. Wish me luck
Matt don't worry so many people have been building are putting together fall stuff since last month so keep them coming can you do some Halloween decorations 😊 that can go outside or inside thank you❤
The bench for the pumpkin would work as a sawhorse off season.
Matthew you are AWESOME!!! THANK YOU!!!🎉🎉❤
Those pumpkins are why I have a 30" scroll saw.
When talking about Big Box stores you mention OPV or PV. What is that? Thank you for the videos.
Another awesome video Matthew. Love the way you broke and simplified the bench build. I have my eye on a few plans I'm interested in on your site. Thanks for sharing and keep them coming.
I think I would have did a round over to soften the look a little.
Thank you for sharing these great ideas!
Glad you like them!
That was great ! Lots of idea's. Thank for all your time and effort. Please do forget the dog bowl platform, I really want to see your twist on it, I sold three with dog bowls from Shoprite !
Great explanation!!! Thank you
Hey Matthew , Can you do a video on how you paint your projects to have that distressed or weathered look? Great stuff as always too!
Love your videos Matt!
Hey, what paint would you use for a food safe finish??
Pumpkin stands look great
Another good one Matthew!!! Really enjoy these easy builds.
Thanks for taking the time and sharing your knowledge. JimE
Will you do a video on actually building the projects, or short videos I should sat.
Making that bench next. Thanks!!
Matt, where do you suggest to sell these cute little projects?
Great info and tips as usual... Preciate ya 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾...
Fello Builder Fabricator Life 💙..
Very good inspiration.
i saw that pumpkin pie diss,😝. Another great video, thanks Matthew.
Lol… thank you.
Can i use regular screws from the top? I was thinking to countersink them and fill. I don't have the pocket hole items
Can you collect some of this into like a document to look at? Loving the channel and videos but its a lot of content to filter through to find the stuff I can do and/or am interested in doing myself. It would be super awesome to have some of this information in a more browseable format.
How can I dry out fence pickets? I been building planters but as they dry the wood shrinks. Wondering how to get DRY fence pickets ready to use
I'm in the UK. We are still in the process of importing Halloween.
Can someone explain to me what a 'pumpkin sitter' is ? What does it represent or do ?
Hi John, it's also called a shelf sitter, so just a decorative piece that will sit on a shelf independently. If you have wood thick enough to stand up by itself your possibilities are endless 😁 one thing I make is blocks of approx 4x4x2" and wood burn sayings/baby names/wedding dates on them. I sometimes add a hanger on the back or hanger attachments in a bag with it so people can choose how to have it in their home
@@BethyS13 Hi Beth, thanks for your reply.. I thought it had some cultural meaning in your part of the world, but now i understand its just another shelf 'dust collector' that is purchased on a whim.. Family and friends are always buying and giving us trinkets . In fact out lounge now reassembles a seaside giftshop.. I prefer 'clean lines' personally. I'd like to box them all up and get rid but that could bring political problems with family and friends. .
I'm rather torn about churning this stuff out.. I want the money but I'd be adding to the mountains of the very clutter that I hate !
First World problem Beth ! 😁
Regards, John
Matthew, I love your videos. Keep them coming please. Just one question, you recommend using fence pickets a lot in your videos. My experience with these while building actual fences, is that fence pickets shrink very quickly. Do you allow the pickets to shrink up before using them in one of your projects?
I've been watching him for sometime now and yes, I think he lets them sit in his workshop for about 7 days and rotates them out.
Cool, thanks for the information.@@johnnyperez2087
Where do y’all find ideas or where these things are selling?
I look at what the big box stores are selling and go from there.
I like your videos Matthew. Great job.
Great video. I wish I could fine cedar fence pickets in my area - keep up the awesome work
Check your Home depot they carry them, usually stacked right outside the door at my HD. hope this helps.
you make it Fun!,, I really like your station!
Thank you very much!
Absolutely great ideas thanks for sharing
Fantastic video thanks for sharing
Love that staging bench! 🔨
Always enjoy your videos
What doesPB stand for? I missed that episode.
Does it matter what paint to use on a serving tray? I'm getting mixed answers with google
Another awesome video,Matt! Thanks for sharing! I can’t wait to build some of these projects. How did you paint the pumpkin plaque after laser engraving (without getting paint on the letters)?
For the cutting board, what kind of paint or stain can I use that would be food grade?
You can paint and seal with a water base polyurethane or polyacrylic
Thank you
Another great vid!! Thanks!
Nice! What’s your process for finishing the bench?
Love these ideas Matt thanks. Been looking for decent template for the pumpkin trays tbh if anyone can help. Gonna attempt a sided tray in pumpkin shape aswell. Think the pumpkin trays could be pallet wood slats for people. 🏴👍
I love the ideas but do u do videos of u making them ? I'm new to this
I would crank the bench
I love your channel!
Can this be made longer I need it to be 43 inches long
Marketing? What has been the quickest method?
Your pumpkin looks awesome and their pumpkins are lame. I'm talking about the one you made for your bench. Super cute. And I love the bench being actually useful as a bench. Why would they make a bench that isn't useful as a bench?? These stores are crazy.
I have lots of property to sell on and work on I have a ranch. So I am looking to sell two days a week on reach. Here if you sell two days a week on property it's not considered a business. Really would your input. The economy is getting scary
All fun builds