Piyush man, this is EXACTLY what was wrong with my Flip 3 activer speaker unit. I did not have to reattach it, just moving the wire around a bit to get it back in the right place did the trick. The wiring as done by JBL seems to be rather badly done with wires that are too long getting deformed or something. THANKS A MILLION
Very true MrHalalk and you analysed the issue very deeply, this is what i want from every viewer, so that no one should get afraid from these type of technical issue.
@@dhruv20 hi. on mine, the smaller ones holding the speaker cover and end pieces together were shorter silver ones. The three black ones that held the two halves together where the ones that were more difficult to get out. They required a different phillips head screw driver size and a more narrow longer shaft because they were more recessed. Also when all else fails, make sure to righty-tighty... lefty-loosey.
Thank you for taking the time to show this, this is awesome stuff to me, I nerd out when it comes to electrical/electrical engineering, how electricity moves and flows ECT. By the way great assessment of the problem.....] 1) Assessed presumed problem 2) tested theory/hypothesis. 3) Initial findings accurate thus assessment accurate, leading to a quick and reliable fix. Good eye, you seem very professional, I can tell you wouldn't be opposed to learning more, well learning the right way. First we throw out everything we were taught in elementary/highschool/college cause it's all nonsense, garbage and totally not reality or practical. The rest is up to you 🤔😉
Good vid! I'm having a problem with a speaker a little bigger than that one. I'm going to try looking to see if I can fix like you did. Thanks for sharing
Weird that so many people are having issues with the flip 3. Mines been fine for the two years I've owned it, but then again I don't listen to bass heavy music. I do listen mine pretty loud though at times.
It's a a smart idea of making money. People often don't do their research and the problem is people bump to music that has a heavy bass. One would expect it to work perfectly but after a 3 weeks or so the bass will start to mess up and that's when you realize you should have bought the warranty :/. It's smart but at the same time dumb. The speaker are made for it, so why would this happen to it. Anywho, lucky you.
As per my knowledge JBL is unable to place the good quality "Breaded wires", which lies between speaker diaphragm and the speaker terminal. So if you want to save your JBL speaker from this type of damage/malfunctioning you should watch this: ua-cam.com/video/jZp7EWVzvrk/v-deo.html
it is not the glue or a blown speaker people it is the wire to the speaker underneath that is right up against shit that makes it rattle carefully bend it our of the way without disconnecting it and you will finally hear some awesomeness
It is definitely not the best way of fixing the problem and it may start distorting again after some time. It does work though, and it is the quickest and easiest way of getting rid of the noise.
@@noskcaj1665 That's right, I have also got the same issue after using it for nearly 2 years. it seams like the build quality is not allowing it to work beyond 2 years.
i had the same problem, solved as you did! Thanks! edit: actually after i've replaced the wires the problem reappeared because i didn't used proper cables that are malleable, so i've replaced the again and it's working fine until.... we'll see. So my advise would be to replace only one of the wires and have a check, if it's working fine then it's no use to replace also the working one.
Just sharing my experince. Took a part mine and found out that the speaker was fine. It was the white wire. Producing that racling noise so I cut it and it work fine. Im guessing. Its a common groung.
This habbi dude sounds like the people who keep calling me who say they are the irs and there going too take away my house if I don’t pay them in gift cards. Lol 😂
I just did a reset and the distortion/poor audio quality on my flip 3 was gone. Recommend trying this before prying it apart. Turn on .... hold + and - , and then push bluetooth button.
Bonjour, exelente vidéo j'ai également un jbl qui grésille j'ai pas bien vu l'opération que vous avez effectuez !si vous savez m'éclairer vous avez soude un fil noir c'est bien ça ?
That is an alternative for the speaker replacement. The best option is to replace the internal speakers which you could get online. check the link below for reference: www.amazon.in/woofer-Speaker-Woofer-Subwoofer-Powered/dp/B08KXPYM5F/ref=asc_df_B08KXPYM5F/?tag=googleshopdes-21&linkCode=df0&hvadid=397081167797&hvpos=&hvnetw=g&hvrand=5488740972732132636&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1007749&hvtargid=pla-1031234608004&psc=1&ext_vrnc=hi
What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools. you can purchase it online by checking you old speaker specifications. Check the link below as an example: www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
i have similar problem with my charge 3. My speaker "whistles" on lower tones. Something like there is a small hole in a radiator, but there isn't a hole. I hope You understand. P.S Sorry for bad English😊
Just charge it if you have this problem because I usually use mine on full battery and it works fine but when the battery is low it starts to crackle until you put plug it in to the charger
Definitely you will get the crackling sound if there is low battery, however what I explained in the video is the connection problem of braided wire in one of the speaker.
I have 5 jbl flip 3 broken charging ports or distorting sounds. And I dunno shit to fix them tried on 2 ended up throwing them away. now selling them as Faulty.
My fake pulse 3 stopped working a long time ago. So I bought at 3.7 volt 2200mah battery from amazon. Installed it and it worked like a charm. After 15-20 min of playback, I put it on charge via my mobile charger. It was again the same problem, it felt like battery was not getting charged, rather it was getting damaged while charging. Suddenly speaker woke itself and made cracking creaking sound with couple of blinks and turned off. Now it doesn't respond if I try to turn on or charge it. Can you help????
This could be a serious issue of a component malfunctioning. I guess you have to check the suspected components on the PCB one by one with the help of multimeter, which is Offcource time taking, but that's the only way to verify the PCB traces and the components if all are good.
Bro in my flip 4 I am having the same problem from one side of the speaker I am having Cracking kind of sound and it's speaker is not working the other side is working so please help
In this situation you are having 2 options: 1. you could check whether the problem is related to braided wire in the speaker or some thing else. *In case you don't know what is braided wire in speaker and where it is located in the speaker and why it is getting malfunctioned, to know about it watch this video: ua-cam.com/video/jZp7EWVzvrk/v-deo.html 2. you could purchase a speaker and just replace it, for an example check out the link below: www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
What if base tube is damage I'm getting the same problem on my flip 3 SE . And I'm not able to detect the exact problem whether it's Wrong with the base tube or Wiring problem
for wiring problem you could use multimeter to verify. if wiring problem is not there and it is still giving the crackling sound then check the diaphragm of the speaker if it is damaged at the joints.
Mine just has tons of white noise, don’t know if that’s just how it is, but when i use it at 20% volume and under, it is more white noise then audio, making it useless for podcast until asleep.
@@PiyushPrasoon battery holds a 8 hour charge, so i don’t believe it’s the battery. Im just wondering, maybe im a bit sensitive to white noise, and its just normal for the flip 3, cause i didn’t test any other of those. I only have a Go 2, but you can’t compare those of course. Thanks for the help by the way, i appreciate it. 👍🏻
@@phoenixyt124 Ohhh got it, however you could try playing speaker noise test audio and play it on different different devices (like you headphones, other speakers and also on this speaker) hope you may figure out the difference that its actually having the issue.
I have replaced the defective braid wire of the speaker, not with the preferred wire but with a normal soft, thin and flexible wire. Braid wire is a wire which is connected from the voice coil of the speaker (point for soldering the braid wire is on the speaker diaphragm) via diaphragm of the speaker to the outer terminal on the speaker. What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools. you can purchase it online by checking you old speaker specifications. Check the link below as an example: www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
In case you are planing to take the speaker for pool party then yes. Normal rain will not affect the speaker. To make it full proof water proof you could use little bit of fevical on the fittings while re-assembling it as by default it is fixed with the help of glue and screw both.
There is a problem with speaker which has been explained in the video. It a problem with the speaker wire which is connecting the voice coil and the terminal of the speaker which is also know as braided wire.
This is a delicate speaker not to be play on the loudest sound and it is not "RUGGED". So it's life depends upon your polite habit with the gadget. I thing now you could decide whether to buy it or not.
You are right, however if you will think logically, what will you do with the speaker in water if it will not work properly. So the fist thing is to repair it so that at least the speaker could play music in a proper manner. Any way playing music while enjoying in the water or during bath is the rare activity among people. Hence loosing water proofing property of speaker will not be a big deal. Any way thanks for reminding this...! and of-course thank you for you valuable comment.
the best option is to replace the faulty speaker inside it. you could purchase it online. ua-cam.com/users/redirect?redir_token=p3EbBG0bHp_4prF38ds0jBNNC2t8MTU4OTI5MTk1NUAxNTg5MjA1NTU1&event=comments&q=https%3A%2F%2Fwww.aliexpress.com%2Fitem%2F2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker%2F32581348021.html%3Fspm%3D2114.40010508.4.2.Iy59aT&stzid=UgxEw7-yUjjkseZBhah4AaABAg.8u3UuTw6Yn48u4UOmXxiBd
No new model are better then this. I haven't seen more problems got reported for the new model. However I would recommend you to check each and every parameter and there reviews before you are purchasing it, as I haven't used the new model by myself.
@@PiyushPrasoon sir thank you for your kind reply I will surely try to follow your words Sir I will be grateful if you could tell :- Is the speaker loud and does it really distort at full volume And can it be used as an outdoor speaker also Sir I am planning to buy this one If I could get the answers of these questions I would be greateful Thanking you.
@@suryashishkundu First of all, Please don't be grateful to me. I am just sharing the knowledge what I am having on basis of my knowing. Now let cone to the point. It completely depends on the sound/music or the song which you are playing in the speaker. Let's say for an example if you will play rock songs which is already having high bass effect, will definitely harm the speaker at maximum volume and the speaker diaphragm could be damaged. At the same time if you will play soft music on full volume it will not affect the speaker diaphragm much as due the les bass the diaphragm movement would be less and hence it will definitely extend the life of speaker. Conclusion: It completely owners/users responsibility to understand if the sound out put is to high with high bass effect the speaker volume should be decreased. Watch this video for more clarity: ua-cam.com/video/jZp7EWVzvrk/v-deo.html
@@PiyushPrasoon yes sir I clearly understood What you wanted to say . Last thing sir if you could tell Is the speaker pretty loud As we need to buy a speaker for outdoor as well as indoor use Thank you sir
bro...i need advice...my monster blaster is giving a ridiculously loud annoying radio like screeching sound...any suggestions or should i send it over to u so u can hav a look at it
It might be possible it braid wire is slightly broken, and due to improper contact it is creating noise. have a look on the video given below to know what is braid wire in a speaker and why it is getting broken. link: ua-cam.com/video/jZp7EWVzvrk/v-deo.html It is not possible to for you to send it to me, I will guide you online.
Tighten you grip on screwdriver apply a bit of pressure and turn in anti-clockwise direction. The screws are fixed with the help of a pinch of glue from manufacturer, so if you are opening it for the first time you have to apply a bit of pressure and twist it with a bit of power, it will be loosen.
@@groomingsessionmalayali When you are putting it on charge it is getting the sufficient amount of power. AND Removing it from power source force it to run from battery power and if the battery is not having enough charge to run the speaker then it will crackle.
There are different parameters due to which it might be not working. Just let me know few details for some points given below. 1. Was it worked properly before you charge it since the malfunction occurred? 2. Is battery is removable? 3. Does any led indicator glows when you connect the charger. 4. Do you here any sound (even a small sound) when you are switching it on with/without charger?
I have a lot of static in my speaker and a lot of crackling noises what do I do can someone help me? Can someone tell me if my Bluetooth speaker is damaged or not?
how old is the speaker, do you think that battery might be dead? if battery is not dead. then check the speakers there might be braid wire problem to know what is braid wire please check out this video: ua-cam.com/video/jZp7EWVzvrk/v-deo.html You will also come to know about the wire(braid wire) which I have repaired in the video. In case your speaker is having braid wire issue, it is better to replace the defective speaker. you could check few comparable speaker if you need to replace them. you can purchase it online by checking you old speaker specifications. Check the link below as an example: www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools. you can purchase it online by checking you old speaker specifications. Check the link below as an example: www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT Show less
I have replaced the defective braid wire of the speaker, not with the preferred wire but with a normal soft, thin and flexible wire. What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools. you can purchase it online by checking you old speaker specifications. Check the link below as an example: www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
There might be several problems related to this issue. I have listed few things, please follow those and let me know if it got resolved. Method 1: Try using the Playing Audio troubleshooter to fix the problem. It checks for common problems with your volume settings, your sound card or driver, and your speakers or headphones. Method 2: Try installing the drivers and check the status. Method 3: After you've paired (connected) a Bluetooth enabled device with a Bluetooth enabled computer, you can change the name of the device or enable or disable services for it. You can also control how your computer pairs with this and with other Bluetooth enabled devices.
If it is producing the start up sound then, go ahead and reset the JBL speaker. In case you are not getting the start up sound nor the shutdown sound, you need to check it with your local trustworthy technical expert. Reset Process: 1. Power on the unit by pressing the on/off button for about one second. 2. Press the "Vol - " button and the "Bluetooth" button together for more than 7 seconds. 3. The unit will display Red, Green, Blue light and go into power off stage, but with the on/off light and the light symbol lighted up. 4. The unit is now reset to factory settings. 5. Switch the Pulse OFF by pressing the on/off button for about one second. 6. You can now turn your device back on and it will be reset to factory settings. In case above method does not work with the speaker, try this:- *Turn speaker on then Hold volume + and phone button at same time. Red light will appear then speaker will power off and reset.
Check all the parameter and the dimension before you go for it. FYI, these are only the comparable one not the original, but sound quality would be good.
open it up and check the speaker connection with the use of multi meter. Note: Do this only if you are having good knowledge about checking connections.
I have this problem on my charge 3 when I put the speaker in place the right speaker dies because of loose solder on the wire and the sealed construction of these speakers makes the left speaker pump the diaphragm of the right speaker and the coil scratches and outputs a crack on the dead right speaker.
If you are thinking the outer left and right cover as a speaker diaphragm, then you are wrong. Cause JBL speakers are having the original speakers secured inside the speaker packaging/body. Once you will open it you could able to view both the speakers as I have shown in the video(watch the video carefully to see the internal speakers). Now coming to the point, in case you are having some future planing to replace the faulty speaker however in the meanwhile if you want to use the JBL with one speaker only, you could desolder the three wire (video time: 02:16)(or the red wire but remember the connections or take a pic before desoldering the wires from the defective speaker). This will work for you and later on you could buy a new speaker and replace it with the defective one.
I have replaced the defective braid wire of the speaker, not with the preferred wire but with a normal soft, thin and flexible wire. What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools. you can purchase it online by checking you old speaker specifications. Check the link below as an example: www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
Hay man! Can I change the current ones to these? Are they size matching ones?My right drivers voice coil blew off, so I need it to be changed, and maybe I'm thinking about changing then to the one you've linked. 17bucks aren't so expensive. Cheers!
Piyush Prasoon Hi My Flip 3 speake's charging indidcator's led light is blinking even when it's not charging and that too even when the speaker is off. Please sugges.
In that case pleas let me know the following details: 1.how old is your JBL? 2.The micro-B type USB port on speaker is working properly or not? 3.Is the speaker is blown out/has low sound quality if compared when you purchased it? 4.Do you remember if it had any water damage? 5.Are the other functionalities of the device is working properly?
Its an year old, need to insert the charging plug or shake it sometimes then it starts to charge... sound is as good as earlier but recently heard some hiss sound via speaker during charging.
So that might be the problem try replacing the charging port i.e micro-b type usb port, it is not only for charging but also for data, so as per my recommendation you should replace/repair this port first and check if it is working or not.
My jbl charge 3 muffles when a song with bass is being played. Had exchanged it with JBL for a new one but the new one only last for a month and started to make weird muffle noise when bass took over the song... while my old one before i got it exchange lasted for half a year. Idk whats the problem.
it is a portable mini speakers, if you will play high bass song on maximum volume, definitely the small speaker's diaphragm movement will be high due to which diaphragm or the braid wire will be damaged and in result you will get the sound as you have stated above.
It might be possible the speaker diaphragm got broken, any way you could replace the internal damaged speaker with the new one. you can search for the speaker online or off line after getting the details from the damaged one. for example check out the link below: www.ubuy.co.in/catalog/product/view/id/10074538?gclid=Cj0KCQiAvebhBRD5ARIsAIQUmnknO8YSR72BLhn_lDz8BbDR7j-9ISPbbJo7AfSi0XTpSbL2gUCaGm8aAinUEALw_wcB
Don’t recommend opening up your JBL charge 3 opened my and once I checked if any wires were damaged and closed my JBL Charge 3 neither sides of the base would work please don’t open your JBL Charge 3 😅 take it to the company or have someone professional fix it for you it’s not worth breaking an $150 speaker🤦♂️
I've had my speaker one day and it's making a crackling sound! Are you kidding me. I don't know how soder. I'm never buying JBL again or Anger because their speakers sound muddy like they're playing under water.
Hi @Isabella M, I do understand you feeling, however I would also not recommend you to go with the JBL purchase again. I would like to clarify that, this whole series of JBL is coming up with the crackling sound problem after 1.5 to 2 years approximately, well this is what I could share, base on my observation since it got launched.
like mine will be fully charged then it will jump down to red then the sound of the music will start cracking. What should I do?
Nick Bock same issue have you found any solution to it??
I too have the same problem. Notify when you know more.
You should try to buy a new battery to it.
i dont fukin know>>
Buy a new battery. Mine had the same problem. $14.00
Piyush man, this is EXACTLY what was wrong with my Flip 3 activer speaker unit. I did not have to reattach it, just moving the wire around a bit to get it back in the right place did the trick. The wiring as done by JBL seems to be rather badly done with wires that are too long getting deformed or something. THANKS A MILLION
Very true MrHalalk and you analysed the issue very deeply, this is what i want from every viewer, so that no one should get afraid from these type of technical issue.
i hv the same issue and its right that the wire is bit long and easily deformed, thanks for your advice
The video is crackling b wtf
Brian Aguirre word....
facts
It’s always the right side 🗿
Thank you! I'm going home and fixing my speaker now. You made it look so simple. I have the same one in white.
help all my screw wont move a bit.mine is a blak one
@@dhruv20 hi. on mine, the smaller ones holding the speaker cover and end pieces together were shorter silver ones. The three black ones that held the two halves together where the ones that were more difficult to get out. They required a different phillips head screw driver size and a more narrow longer shaft because they were more recessed. Also when all else fails, make sure to righty-tighty... lefty-loosey.
Thank you for taking the time to show this, this is awesome stuff to me, I nerd out when it comes to electrical/electrical engineering, how electricity moves and flows ECT.
By the way great assessment of the problem.....] 1) Assessed presumed problem 2) tested theory/hypothesis. 3) Initial findings accurate thus assessment accurate, leading to a quick and reliable fix.
Good eye, you seem very professional, I can tell you wouldn't be opposed to learning more, well learning the right way. First we throw out everything we were taught in elementary/highschool/college cause it's all nonsense, garbage and totally not reality or practical.
The rest is up to you 🤔😉
I have this issue also, but with a Charge 3. Really frustrating. Thanks for the video though, this is very helpful information.
did yu get it resolved?
Same with the charge 3
Good vid! I'm having a problem with a speaker a little bigger than that one. I'm going to try looking to see if I can fix like you did.
Thanks for sharing
2020 anyone??😂☝️
Blade me
Me, but I'm thinking mine is something related with battery
@@1theblacksheep mines too
No iam from 2021😌
Yep
Weird that so many people are having issues with the flip 3. Mines been fine for the two years I've owned it, but then again I don't listen to bass heavy music. I do listen mine pretty loud though at times.
It's a a smart idea of making money. People often don't do their research and the problem is people bump to music that has a heavy bass. One would expect it to work perfectly but after a 3 weeks or so the bass will start to mess up and that's when you realize you should have bought the warranty :/. It's smart but at the same time dumb. The speaker are made for it, so why would this happen to it. Anywho, lucky you.
Happened to my jbl flip 4
Bought a charge 3
Happening again zzzzzzzz
As per my knowledge JBL is unable to place the good quality "Breaded wires", which lies between speaker diaphragm and the speaker terminal. So if you want to save your JBL speaker from this type of damage/malfunctioning you should watch this:
ua-cam.com/video/jZp7EWVzvrk/v-deo.html
Exactly the same issue with mine. Thank you so much for taking the time to share. God bless you 🙏👍
it is not the glue or a blown speaker people it is the wire to the speaker underneath that is right up against shit that makes it rattle carefully bend it our of the way without disconnecting it and you will finally hear some awesomeness
Yes, That's true. It's is known as "braid wire".
This should work! Another video suggests stuffing some toilet paper in there. This will prevent the braid wire from moving too much.
It is weird, and for sure it will not work.
It is definitely not the best way of fixing the problem and it may start distorting again after some time. It does work though, and it is the quickest and easiest way of getting rid of the noise.
this answer worked for my jbl charge 3
good guidelines thank you; JBL develops the crackling sound after 2 yrs of excellent performance normally.
Glad it helped
Bro it started for me almost exactly 2 years after I got it
@@noskcaj1665 That's right, I have also got the same issue after using it for nearly 2 years. it seams like the build quality is not allowing it to work beyond 2 years.
Great video! Thank you so much. My only suggestion is a headlamp or task light for when you're working at night.
Great point! thank you so much for your valuable feedback
i had the same problem, solved as you did! Thanks!
edit: actually after i've replaced the wires the problem reappeared because i didn't used proper cables that are malleable, so i've replaced the again and it's working fine until.... we'll see.
So my advise would be to replace only one of the wires and have a check, if it's working fine then it's no use to replace also the working one.
This helped me half way to fix my JBL flip essential
2021?
Thanks for the tips, I got the same problem from the same speaker position.
I'll try this method later
Just sharing my experince. Took a part mine and found out that the speaker was fine. It was the white wire. Producing that racling noise so I cut it and it work fine. Im guessing. Its a common groung.
very helpful man, it worked like a charm
It's WORKING 🔥 THANK YOU SO MUCH
You're welcome!
Thank you very much!! I repare my JBL thank to you! You helped a lot!!
This habbi dude sounds like the people who keep calling me who say they are the irs and there going too take away my house if I don’t pay them in gift cards. Lol 😂
Hi, my JBL charge 3 has a very fuzzy sound. It is still new. please help me
Romeo Ralph Borres nb
Try shoftware update from jbl connect
I just did a reset and the distortion/poor audio quality on my flip 3 was gone.
Recommend trying this before prying it apart.
Turn on .... hold + and - , and then push bluetooth button.
That just worked for mine instantly
Thank you soo much I love u man
It is not working for me
mines a little over 2 years and now i’m running into a slight pop. I’ll ride this one out till it’s bad or until the flip 5 (if it even comes$
Bonjour, exelente vidéo j'ai également un jbl qui grésille j'ai pas bien vu l'opération que vous avez effectuez !si vous savez m'éclairer vous avez soude un fil noir c'est bien ça ?
That is an alternative for the speaker replacement. The best option is to replace the internal speakers which you could get online.
check the link below for reference: www.amazon.in/woofer-Speaker-Woofer-Subwoofer-Powered/dp/B08KXPYM5F/ref=asc_df_B08KXPYM5F/?tag=googleshopdes-21&linkCode=df0&hvadid=397081167797&hvpos=&hvnetw=g&hvrand=5488740972732132636&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1007749&hvtargid=pla-1031234608004&psc=1&ext_vrnc=hi
2022
Fix at 2:44
My jbl speaker started making cracked sound. How will i fix it? please help
What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools.
you can purchase it online by checking you old speaker specifications. Check the link below as an example:
www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
mine was dropped. and the right treble speaker was damaged. where can i buy the replacement treble speaker?thanks
Same here I had a goofy coworker knock my speaker down from a four foot height distance from the floor onto a fast food hard tile floor 😂😲
i have similar problem with my charge 3. My speaker "whistles" on lower tones. Something like there is a small hole in a radiator, but there isn't a hole. I hope You understand.
P.S Sorry for bad English😊
Please send me the sound sample on facebook.com/prasoontech/ (more than 1 minute sound track.)
Do you fix that Problem?
so the resolution is just buy a solder kit ?? why is nobody saying this?
Just charge it if you have this problem because I usually use mine on full battery and it works fine but when the battery is low it starts to crackle until you put plug it in to the charger
Definitely you will get the crackling sound if there is low battery, however what I explained in the video is the connection problem of braided wire in one of the speaker.
My black flip 3 has the crackling sound and my dad couldn’t be able to fix it so I show this vid to my dad and it with might work
ive just made a huge rant about this speaker!! they keep sending me faulty ones!!! any tips!?
You should ask them for money back.
Buy a Bose soundlink
what's inside a flip 3 😀 thanks!
I have 5 jbl flip 3 broken charging ports or distorting sounds. And I dunno shit to fix them tried on 2 ended up throwing them away. now selling them as Faulty.
Watching this on jbl flip 3 😂
Me too
:-)
WOWOWWWW SOOOO FUNNY
Yeah cos their a fucking screen on the charge 3 to watch videos isn't their it's called "LISTENING" not "WATCHING"dumbass 🤣
Huseyin Yigit jeezus man chill. You know what I mean.
My fake pulse 3 stopped working a long time ago. So I bought at 3.7 volt 2200mah battery from amazon. Installed it and it worked like a charm. After 15-20 min of playback, I put it on charge via my mobile charger. It was again the same problem, it felt like battery was not getting charged, rather it was getting damaged while charging. Suddenly speaker woke itself and made cracking creaking sound with couple of blinks and turned off. Now it doesn't respond if I try to turn on or charge it. Can you help????
This could be a serious issue of a component malfunctioning. I guess you have to check the suspected components on the PCB one by one with the help of multimeter, which is Offcource time taking, but that's the only way to verify the PCB traces and the components if all are good.
@@PiyushPrasoon ok
i own jbl flip 4 ...it create kind of irritating low sound like fan is running inside when somg is playing at low volume level .is it normal????
Bro in my flip 4 I am having the same problem from one side of the speaker I am having Cracking kind of sound and it's speaker is not working the other side is working so please help
In this situation you are having 2 options:
1. you could check whether the problem is related to braided wire in the speaker or some thing else.
*In case you don't know what is braided wire in speaker and where it is located in the speaker and why it is getting malfunctioned, to know about it watch this video: ua-cam.com/video/jZp7EWVzvrk/v-deo.html
2. you could purchase a speaker and just replace it, for an example check out the link below:
www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
It’s the right side on mine too ....
What if base tube is damage I'm getting the same problem on my flip 3 SE . And I'm not able to detect the exact problem whether it's Wrong with the base tube or Wiring problem
for wiring problem you could use multimeter to verify.
if wiring problem is not there and it is still giving the crackling sound then check the diaphragm of the speaker if it is damaged at the joints.
2021 anyone?
I like the music background
hey man mine stopped making any sound completely after I was charging it in my car pls help
Check whether the indicator glows while it is charging, if not it might be the problem with the battery or the wires connected to the battery.
Why do you guys keep taking out?
Hey when i put my jbl flip 3 to play songs with bass, when the bass comes it's Squeezes can you help me ?
Mine just has tons of white noise, don’t know if that’s just how it is, but when i use it at 20% volume and under, it is more white noise then audio, making it useless for podcast until asleep.
It could have the below issue:
1. braided wire wear out
2. speaker diaphragm broken
3. battery could be the issue (what the back time?)
@@PiyushPrasoon battery holds a 8 hour charge, so i don’t believe it’s the battery. Im just wondering, maybe im a bit sensitive to white noise, and its just normal for the flip 3, cause i didn’t test any other of those. I only have a Go 2, but you can’t compare those of course. Thanks for the help by the way, i appreciate it. 👍🏻
@@phoenixyt124 Ohhh got it, however you could try playing speaker noise test audio and play it on different different devices (like you headphones, other speakers and also on this speaker) hope you may figure out the difference that its actually having the issue.
@@PiyushPrasoon yes, i will test that, maybe the speaker is faulty indeed. Thanks again.
I have the same problem on left speaker , i understand first move but the didn't understood 2. Move... from to where put some cable ???
I have replaced the defective braid wire of the speaker, not with the preferred wire but with a normal soft, thin and flexible wire. Braid wire is a wire which is connected from the voice coil of the speaker (point for soldering the braid wire is on the speaker diaphragm) via diaphragm of the speaker to the outer terminal on the speaker.
What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools.
you can purchase it online by checking you old speaker specifications. Check the link below as an example:
www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
video may be helpful, but i am not gonna spend 1~2 hour to fix this shit.
Is this the same for the jbl flip 5?
if the same sound is coming then it could be the same issue
Will this process effect the speakers water resistance ?
In case you are planing to take the speaker for pool party then yes. Normal rain will not affect the speaker.
To make it full proof water proof you could use little bit of fevical on the fittings while re-assembling it as by default it is fixed with the help of glue and screw both.
u know u ruined the adhesive that makes it water proof right
The speaker which I have opened in the video is not a water proof speaker.
Wolfgang7117 The flip 3 is not waterproof, it is splash proof
You are correct Mr. Pbknowall.
xD
Pbknowall yes thats what im saying🤦♂️🤦♂️
Wathcing this on jbl charge 3
Explain problem with speaker . thanks
There is a problem with speaker which has been explained in the video. It a problem with the speaker wire which is connecting the voice coil and the terminal of the speaker which is also know as braided wire.
Should I buy or not?
This is a delicate speaker not to be play on the loudest sound and it is not "RUGGED". So it's life depends upon your polite habit with the gadget. I thing now you could decide whether to buy it or not.
Where do you buy the new speaker???
www.google.com/aclk?sa=L&ai=DChcSEwimp8WB7dLrAhUBVmAKHbzOAscYABAHGgJ0bQ&sig=AOD64_2IiaQnfzhRU1icPq69P5tpvSHJaA&ctype=5&q=&ved=2ahUKEwjq3buB7dLrAhWbA3IKHaZaCq8Q9aACegQIDRBY&adurl=
Reminding if yoy remove the speakers of a diffrent speaker that is water proof the speaker will not be water proof enymore
You are right, however if you will think logically, what will you do with the speaker in water if it will not work properly. So the fist thing is to repair it so that at least the speaker could play music in a proper manner. Any way playing music while enjoying in the water or during bath is the rare activity among people. Hence loosing water proofing property of speaker will not be a big deal.
Any way thanks for reminding this...! and of-course thank you for you valuable comment.
if you're using your speaker while it's charging take it off the charger, it worked for me
Thank you for you valuable suggestion.
i just bought flip 3 at higher volume it makes very small sound of vibration hardly noticable is it normal kind of buzz sound
It is normal, however, if you will play such a high base songs at max volume on this small speaker it will definitely get damaged.
Mind have a sudden "eeeek" sound, especially when the charger isnt connected. Please help me.
please record the video and post it on my facebook page so that I could get the issue properly.
facebook: facebook.com/prasoontech/
Mine is jbl flip 2 it is also crackling can u please tell me how to fix?thanks
the best option is to replace the faulty speaker inside it.
you could purchase it online.
ua-cam.com/users/redirect?redir_token=p3EbBG0bHp_4prF38ds0jBNNC2t8MTU4OTI5MTk1NUAxNTg5MjA1NTU1&event=comments&q=https%3A%2F%2Fwww.aliexpress.com%2Fitem%2F2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker%2F32581348021.html%3Fspm%3D2114.40010508.4.2.Iy59aT&stzid=UgxEw7-yUjjkseZBhah4AaABAg.8u3UuTw6Yn48u4UOmXxiBd
Sir can this problem be with the newer JBL 3 models also
No new model are better then this. I haven't seen more problems got reported for the new model.
However I would recommend you to check each and every parameter and there reviews before you are purchasing it, as I haven't used the new model by myself.
@@PiyushPrasoon sir thank you for your kind reply
I will surely try to follow your words
Sir I will be grateful if you could tell :-
Is the speaker loud and does it really distort at full volume
And can it be used as an outdoor speaker also
Sir I am planning to buy this one
If I could get the answers of these questions I would be greateful
Thanking you.
@@suryashishkundu First of all, Please don't be grateful to me. I am just sharing the knowledge what I am having on basis of my knowing.
Now let cone to the point.
It completely depends on the sound/music or the song which you are playing in the speaker.
Let's say for an example if you will play rock songs which is already having high bass effect, will definitely harm the speaker at maximum volume and the speaker diaphragm could be damaged.
At the same time if you will play soft music on full volume it will not affect the speaker diaphragm much as due the les bass the diaphragm movement would be less and hence it will definitely extend the life of speaker.
Conclusion: It completely owners/users responsibility to understand if the sound out put is to high with high bass effect the speaker volume should be decreased.
Watch this video for more clarity:
ua-cam.com/video/jZp7EWVzvrk/v-deo.html
@@PiyushPrasoon yes sir
I clearly understood
What you wanted to say .
Last thing sir if you could tell
Is the speaker pretty loud
As we need to buy a speaker for outdoor as well as indoor use
Thank you sir
bro...i need advice...my monster blaster is giving a ridiculously loud annoying radio like screeching sound...any suggestions or should i send it over to u so u can hav a look at it
It might be possible it braid wire is slightly broken, and due to improper contact it is creating noise.
have a look on the video given below to know what is braid wire in a speaker and why it is getting broken.
link: ua-cam.com/video/jZp7EWVzvrk/v-deo.html
It is not possible to for you to send it to me, I will guide you online.
I have the same problem with mine...!
help all my screw wont move a bit.mine is a blak one
Tighten you grip on screwdriver apply a bit of pressure and turn in anti-clockwise direction.
The screws are fixed with the help of a pinch of glue from manufacturer, so if you are opening it for the first time you have to apply a bit of pressure and twist it with a bit of power, it will be loosen.
so easy to open !!
I love this video thank you soo much
Mine gets crackle when its having low battery and if its directly connected no problem for it any reason?
you speaker's battery life is over
@@PiyushPrasoon battery life over means does it gets crackle?
@@PiyushPrasoon but i used it 3 years
@@groomingsessionmalayali When you are putting it on charge it is getting the sufficient amount of power.
AND
Removing it from power source force it to run from battery power and if the battery is not having enough charge to run the speaker then it will crackle.
@@groomingsessionmalayali 3 years are more then enough for this type of speaker battery, after which the battery may get dead.
Sir can you please help me ? Im looking on how may I fix this kts-1090a i don't know what happened after i charged it ..
There are different parameters due to which it might be not working. Just let me know few details for some points given below.
1. Was it worked properly before you charge it since the malfunction occurred?
2. Is battery is removable?
3. Does any led indicator glows when you connect the charger.
4. Do you here any sound (even a small sound) when you are switching it on with/without charger?
@@PiyushPrasoon i have the same pblm.. Pls hlp me
@@sandhraak394 Best solution for you is to replace the internal faulty speaker...!! You could get it from online or local shops.
I have a lot of static in my speaker and a lot of crackling noises what do I do can someone help me? Can someone tell me if my Bluetooth speaker is damaged or not?
how old is the speaker, do you think that battery might be dead?
if battery is not dead. then check the speakers there might be braid wire problem to know what is braid wire please check out this video: ua-cam.com/video/jZp7EWVzvrk/v-deo.html You will also come to know about the wire(braid wire) which I have repaired in the video.
In case your speaker is having braid wire issue, it is better to replace the defective speaker. you could check few comparable speaker if you need to replace them.
you can purchase it online by checking you old speaker specifications. Check the link below as an example:
www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
Plz video for JBL go cracking sound
I will try my best to publish video for JBL go ASAP. Thank you for your recommendation.
Mine is cracking what should i do?
What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools.
you can purchase it online by checking you old speaker specifications. Check the link below as an example:
www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
Show less
Thank You Very Much
Piyush Prasoon i have a crackling problem with sound with the jbl charge 3, can u please help me?
I have replaced the defective braid wire of the speaker, not with the preferred wire but with a normal soft, thin and flexible wire.
What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools.
you can purchase it online by checking you old speaker specifications. Check the link below as an example:
www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
do you know if this speaker you posted will work with the JBL Flip 3? I want to purchase it.
Try to demagnetized your speakers
My flip 3 jbl connected to Bluetooth but no sound when I play anything with mobile or laptop
Plz help me out
There might be several problems related to this issue. I have listed few things, please follow those and let me know if it got resolved.
Method 1: Try using the Playing Audio troubleshooter to fix the problem. It checks for common problems with your volume settings, your sound card or driver, and your speakers or headphones.
Method 2: Try installing the drivers and check the status.
Method 3: After you've paired (connected) a Bluetooth enabled device with a Bluetooth enabled computer, you can change the name of the device or enable or disable services for it. You can also control how your computer pairs with this and with other Bluetooth enabled devices.
If it is producing the start up sound then, go ahead and reset the JBL speaker. In case you are not getting the start up sound nor the shutdown sound, you need to check it with your local trustworthy technical expert.
Reset Process:
1. Power on the unit by pressing the on/off button for about one second.
2. Press the "Vol - " button and the "Bluetooth" button together for more than 7
seconds.
3. The unit will display Red, Green, Blue light and go into power off stage, but with the
on/off light and the light symbol lighted up.
4. The unit is now reset to factory settings.
5. Switch the Pulse OFF by pressing the on/off button for about one second.
6. You can now turn your device back on and it will be reset to factory settings.
In case above method does not work with the speaker, try this:-
*Turn speaker on then Hold volume + and phone button at same time. Red light will appear then speaker will power off and reset.
You're microphone has a little bit of buzzing as fucking well
PP review
Bhai mere pass JBL charge 3 hai is Mai BHI crackling sound aarhi hai left side wale speaker se kya karu
Better option is to replace the left speaker
with the similar one
@@PiyushPrasoon kidhar se original wala milega
@@satyamsaheb3978 www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiMqrD_9fjvAhXBaSoKHSU9BCAYABAOGgJ0bQ&ohost=www.google.com&cid=CAESQOD2MFpRxjStE2qd0pHsYlNv-YGXxzhpZ6Ru2CBAQTbc0d7kJfsuU1hdes2q5CDWsMptzTpc8sKmzPp3HzdcEdI&sig=AOD64_0Sh5K0c325cK6KAeqoP63Zp_WefA&ctype=5&q=&ved=2ahUKEwjXz6b_9fjvAhUGxDgGHfmGB9oQ9aACegQIARB8&adurl=
www.google.com/aclk?sa=L&ai=DChcSEwiMqrD_9fjvAhXBaSoKHSU9BCAYABALGgJ0bQ&ae=2&sig=AOD64_1k8gVMmW86A3o1GoREAW6XEdBuRw&ctype=5&q=&ved=2ahUKEwjXz6b_9fjvAhUGxDgGHfmGB9oQ9aACegUIARCMAQ&adurl=
Check all the parameter and the dimension before you go for it. FYI, these are only the comparable one not the original, but sound quality would be good.
mines won't play sound at all....even when i turn it on
Check volume, Check internal speaker connection, check BT connection
It connected to my phone and the volume maxed it wont play sound at all
open it up and check the speaker connection with the use of multi meter.
Note: Do this only if you are having good knowledge about checking connections.
I have this problem on my charge 3 when I put the speaker in place the right speaker dies because of loose solder on the wire and the sealed construction of these speakers makes the left speaker pump the diaphragm of the right speaker and the coil scratches and outputs a crack on the dead right speaker.
If you are thinking the outer left and right cover as a speaker diaphragm, then you are wrong. Cause JBL speakers are having the original speakers secured inside the speaker packaging/body.
Once you will open it you could able to view both the speakers as I have shown in the video(watch the video carefully to see the internal speakers).
Now coming to the point, in case you are having some future planing to replace the faulty speaker however in the meanwhile if you want to use the JBL with one speaker only, you could desolder the three wire (video time: 02:16)(or the red wire but remember the connections or take a pic before desoldering the wires from the defective speaker). This will work for you and later on you could buy a new speaker and replace it with the defective one.
What did you do on the speaker?
I have replaced the defective braid wire of the speaker, not with the preferred wire but with a normal soft, thin and flexible wire.
What I have performed in the video is a tough solution, Generally repairing shops or the technicians just replace the defective speaker with the new one by matching there size an their specification, you can do the same with basic tools.
you can purchase it online by checking you old speaker specifications. Check the link below as an example:
www.aliexpress.com/item/2pcs-3inch-4ohm-10W-78mm-gold-foam-edge-black-magnetic-multimedia-speaker/32581348021.html?spm=2114.40010508.4.2.Iy59aT
Thanks...
Hay man! Can I change the current ones to these? Are they size matching ones?My right drivers voice coil blew off, so I need it to be changed, and maybe I'm thinking about changing then to the one you've linked. 17bucks aren't so expensive.
Cheers!
NO! The linked ones are 3 inch. The Flip 3 has 1 inch speakers. That was just an example, that's why he said to match your speaker specs...
Thanks for the fast reply!
Could you send me some alternatives pls in aliexpress? Confused now with them.
Thanks!
Piyush Prasoon Hi My Flip 3 speake's charging indidcator's led light is blinking even when it's not charging and that too even when the speaker is off. Please sugges.
There might be problem in on and of switch of the speaker, did the speaker fallen down?
No It did not... Thanks for your reply
In that case pleas let me know the following details:
1.how old is your JBL?
2.The micro-B type USB port on speaker is working properly or not?
3.Is the speaker is blown out/has low sound quality if compared when you purchased it?
4.Do you remember if it had any water damage?
5.Are the other functionalities of the device is working properly?
Its an year old, need to insert the charging plug or shake it sometimes then it starts to charge... sound is as good as earlier but recently heard some hiss sound via speaker during charging.
So that might be the problem try replacing the charging port i.e micro-b type usb port, it is not only for charging but also for data, so as per my recommendation you should replace/repair this port first and check if it is working or not.
My jbl charge 3 muffles when a song with bass is being played. Had exchanged it with JBL for a new one but the new one only last for a month and started to make weird muffle noise when bass took over the song... while my old one before i got it exchange lasted for half a year. Idk whats the problem.
it is a portable mini speakers, if you will play high bass song on maximum volume, definitely the small speaker's diaphragm movement will be high due to which diaphragm or the braid wire will be damaged and in result you will get the sound as you have stated above.
I just blew out my jbl flip 3 when trying to sync it to another speaker...
It might be possible the speaker diaphragm got broken, any way you could replace the internal damaged speaker with the new one. you can search for the speaker online or off line after getting the details from the damaged one.
for example check out the link below:
www.ubuy.co.in/catalog/product/view/id/10074538?gclid=Cj0KCQiAvebhBRD5ARIsAIQUmnknO8YSR72BLhn_lDz8BbDR7j-9ISPbbJo7AfSi0XTpSbL2gUCaGm8aAinUEALw_wcB
YOUR ENGLISH GRAMMER....👍👍👍
:-)
Hello my filp 3's charging pin not working can u help me plz 8'm from punjab
try replacing the charger
No his charging slot is damaged pin not going into the charging slot
in that case you need to replace the slot.
Possible in chandigarh
Yes off-course you can contact local trusted repairing shops/repairing center.
Don’t recommend opening up your JBL charge 3 opened my and once I checked if any wires were damaged and closed my JBL Charge 3 neither sides of the base would work please don’t open your JBL Charge 3 😅 take it to the company or have someone professional fix it for you it’s not worth breaking an $150 speaker🤦♂️
off-course man you need to do these technical work with great care and it should be performed very patiently and precisely.
MATTHEW575M thanks, fixed it about 2 weeks ago, I’m happy you still helped :)
My bluetooth pairing mode not turning on any help !$
Probably it would be switch issue or the module issue
@@PiyushPrasoon my device is jbl flip essential ,how to reset it ?
Our Jbl speaker has a bad base its kinda crackling
Mee too did you solve this ?
Nice👍
Thanks Bro 🙂
mine wont turn on.. help
check out if it is getting charged.
Piyush Prasoon It doesn't charge, I've tried to charge it with like 5 different cables.
It might be the battery problem or the the problem of the wire/port connecting to the battery.
Rj_P 28 Maybe the battery is Dead? Try To buy a new battery
LMFAO ur in the wrong video bud. Get a new speakers for that
I will never buy a jbl speaker ever again cause of customer service
You are right, JBL should improve their customer service.
2021 n watching
I've had my speaker one day and it's making a crackling sound! Are you kidding me. I don't know how soder. I'm never buying JBL again or Anger because their speakers sound muddy like they're playing under water.
Hi @Isabella M, I do understand you feeling, however I would also not recommend you to go with the JBL purchase again.
I would like to clarify that, this whole series of JBL is coming up with the crackling sound problem after 1.5 to 2 years approximately, well this is what I could share, base on my observation since it got launched.
My google home mini was doing a cracking noise
Try replacing if it is under warranty, or you could replace the internal speaker
Listening on crackling speaker
Kis kis ke pass hai ye