It's been over a year since the microUSB port of my jbl flip 3 is broken i thought it can't be fixed anymore thank you for this I've repaired my jbl kodus
good repair but FLIP 6 come out already...time to repair like this .....relax and go to the store get FLIP 6..not angry not piss off...not worry kakaka ( IF ME) kkkkkk
Thank you! I’ve used the first part of this video to open up the case only, as surprisingly my Flip 3 looks totally different. I own the Flip 3 stealth edition, so I had to open the battery case as well (which I didn’t mind as I had to replace that as well).
Very good video! I saw many videos of flip 3 that are different on the inside and i dont know why. Ours is the same as this one and i gonna try to fix it the same way! Thanks for the video 🙏🏼👍🏼
It didn’t work. I measured black and red wire have 0v When i power them with 5v from usb charger still no lights come on on the speaker :/ any other problem it could be?
@@insanitybe If it was stored with diacharged battery for a long time it could take some time to turn or. It could be that the battery died. My is a flip3se, but it looks the same as the video
hey men! I already did your tutorial and its working! I just wanna ask, what is the problem of my Bluetooth speaker? My speaker will just turn on if its connected to my charger but when i unplug it to my charger, my speaker will go off? I hope that you notice my comment thanks!
Hi. I have a strange problem (can't find anything on the internet). The 5th led is blinking forever and I have no sound at all. I can start the flip 3 and connect with bluetooth but that's all. Could thid be an issue with the charging port ? I bought a new battery and still the same problem.
@@LittleBitTechInfo The round port next to the USB port that you are fixing...Im wondering if an auxiliary charging cord would work to charge the speaker from that existing port. I dont know if that existing port is connected to the charging feature on the device. If not, do you know why that port is there? I may have to check the manual.
Is there any other way of charging a jbl flip 3? Like is there an alternative to plugging the charger in? Perhaps there’s a wireless way of charging it?
my flip 3 is not this shape - my flip 4 is. I need to find video that shows a flat and round Flip 3. The insides are very different of course - only one speaker. If there is a battery it is under the mother board. I am thinking it can't be fixed.
Hey, Great solution! one question, hope you see it - I cut the battery off (very swollen one and pretty dead) and there are 2 black + 2 red wires that were connected. will it still work or should i solder black to black and red to red?
Also need 3rd wire(white or yellow), you can use single red and black wire, remove battery circuit for 3rd wire, this wire used for temprature and its important for circuit
@@LittleBitTechInfo Thanks for your quick reply!! but not sure i understand. I cut all 5 wires and threw battery. there's one white for temperature as you say. so should i join two blacks of battery together and two reds of battery together because they transfer electricity onward or can i connect the power supply to the battery red and black instead of connecting them to the broken plug red and black
Yes you can connect upto 4.2 Volts on red black wire, but if not power on, you need battery pcb for 3rd wire, watch this video, what you need to do ua-cam.com/video/sfruqxppbIo/v-deo.html
⚠⚠⚠ 1:11 WATCH OUT so you don't break your button cover! My Flip 3 has screws that need to be removed to detach the middle cover. I just found it out the hard way. I pulled the cover just like he did in the video and broke the plastic around the screws :(
FYI - NOT ALWAYS MICRO SOLDER FIX NEEDED: Just fixed my daughter's non-charging Charge 3 after switching out the battery which WAS NOT THE ISSUE. Not sure this is the more likely problem with the USB port but in ours, the 5-point contact piece within the USB metal housing was broken rather than the full metal housing piece which is soldered to the board. I was able to grab that mostly intact L-shaped piece which is plastic and then first tested it while carefully holding in in place and connecting a charger cable>>>>lights on speaker came on and started blinking!!! So, next got some quality plastic glue - E6000 craft adhesive - I had around and using a paperclip and needle was able to lightly and cleanly coat the remaining plastic broken post and also the inside of the metal USB housing that attached to the board. This glue is hard to work with in a small space but you have a few minutes before it sets up to apply to both pieces then fit into place. Let set 24 hours and tried to gently connect>>>WORKING GREAT. Probably need to be gentle with using port but I think I got enough glue in place to make it stronger than original. Wanted to post because I bet this broken plastic is probably the part that needs repair for many and the fix DOES NOT REQUIRE any micro-soldering tools or expertise,,,,well, maybe similar expertise, but with the E600 glue which can be tough. Good luck all
I founded many videos of replace battery of a JBL Flip 3, but no one has the parts like this video. But here you dont replace the batery, and your video replacing it is from the other model different of this one. 😞 Dont know how to dismount this one to replace battery 😕
The board got damaged during the repair. How can I bypass the board and put a cable end coming out of the speaker? I don't care about losing the aux input.
@@LittleBitTechInfo humre yaha Jo mein Spere part wala hai...uske pass bhi ni hai..or iss me jio wifi dongle me same jack lgta hai Meien toh pura google search kr ke dekh lia pr same jack ni mil rha ☹️
Time to buy a new one keep US economy going good and strong..if you live in a 3rd world countries then try to fix but if you lived in the USA....TRASH THEM QUICK..buy a new FLIP 6 OK... US $$$$$
Bro maine aap ka video dekh kar sahi kar dia but mera ek friend ne wire worng connection kar dia uska abhi charge nahi ho raha hai ek hi light show kar raha hai aur on off karo to jo tone ati thi wo bhi nahi aa raha hai,koi solution hai please batao,9833112009 pe please call kar sakte ho ya aapka number dijiyega
Thanks for such useful trick.
It's been over a year since the microUSB port of my jbl flip 3 is broken i thought it can't be fixed anymore thank you for this I've repaired my jbl kodus
Thanks. I was able to fix the charging port by myself with the help of this video
very good video. I had already come up with the temporary fix but was glad to see you do it. thanks
how much it cost to refix
good repair but FLIP 6 come out already...time to repair like this .....relax and go to the store get FLIP 6..not angry not piss off...not worry kakaka ( IF ME) kkkkkk
Thank you for the video and information, changing port broke and you have a a great temporary fix thanks again great idea
Thank you for this demo. Used the temp solution amd works! The text on screen to help guide was most useful.
Great workaround, thanks help me a lot
I would not have thought this would work! I fixed mine thanks to you =)
Super awesome useful trick, thank you very much. You made my day.😊
Thanks for the video, i fixed my jbl😊
Thank you great video cus I'll be using your first method 😅
Thank you! I fixed my JBL Flip 3
Thank you! I’ve used the first part of this video to open up the case only, as surprisingly my Flip 3 looks totally different. I own the Flip 3 stealth edition, so I had to open the battery case as well (which I didn’t mind as I had to replace that as well).
Very good video! I saw many videos of flip 3 that are different on the inside and i dont know why. Ours is the same as this one and i gonna try to fix it the same way! Thanks for the video 🙏🏼👍🏼
Ur most welcome
It didn’t work. I measured black and red wire have 0v
When i power them with 5v from usb charger still no lights come on on the speaker :/ any other problem it could be?
@@insanitybe If it was stored with diacharged battery for a long time it could take some time to turn or. It could be that the battery died.
My is a flip3se, but it looks the same as the video
Thank you brother 🙏
Thanku bhai 😊
God bless you man, your video were usefull to me. After 8 month i can finaly charge mon speaker. Thank you again
Ur most welcome
Jbl take forever to get it fixed
Thank you bro
hey men! I already did your tutorial and its working! I just wanna ask, what is the problem of my Bluetooth speaker? My speaker will just turn on if its connected to my charger but when i unplug it to my charger, my speaker will go off? I hope that you notice my comment thanks!
Battery problem
भाई राम भला करे तेरा 🙏🙏🙏 थैंक्स अगैन 👍
Awesome 👍
Tnk you 🥰👍🏾
Hi, one of my flip 4 battery is dead, instead of replacing battery can’t we run on direct adapter? As I don’t move it anywhere only ise it for tV.
Hi. I have a strange problem (can't find anything on the internet). The 5th led is blinking forever and I have no sound at all. I can start the flip 3 and connect with bluetooth but that's all. Could thid be an issue with the charging port ? I bought a new battery and still the same problem.
5th battery indicator led?
@@LittleBitTechInfo Yes. There are 5 led blinking when you charge your flip. In my case only one led is blinking.
hey will you chance my for me I can get the port if you dont have any just need cost on your labor ?
Whr do you liv? Imm from India Delhi
Way too complicated for me tho, but nice job. Will the other port ext to it charge it as well? Using proper auxiliary cord of course.
Just need 5 volt for charging, so its doesn't matter, which type of jack you are using just, check positive and negative terminals
@@LittleBitTechInfo The round port next to the USB port that you are fixing...Im wondering if an auxiliary charging cord would work to charge the speaker from that existing port. I dont know if that existing port is connected to the charging feature on the device. If not, do you know why that port is there? I may have to check the manual.
Superb
Is there any other way of charging a jbl flip 3? Like is there an alternative to plugging the charger in? Perhaps there’s a wireless way of charging it?
Bro, mera jbl flip 3 ka charging and audio input port poora gaya mujhe wo full swt milega kya
Hey Buddy, My battery got damaged, could you please tell me how I can use my JBL 3 without battery?
same
my flip 3 is not this shape - my flip 4 is. I need to find video that shows a flat and round Flip 3. The insides are very different of course - only one speaker. If there is a battery it is under the mother board. I am thinking it can't be fixed.
Cheers bro 🇦🇺👍
Can it work on that waterproof JBL Clip 3 my charger port is wrecked? If so how can I fix it myself?
Clip 3 is very different speaker then flip 3
Hey, Great solution! one question, hope you see it - I cut the battery off (very swollen one and pretty dead) and there are 2 black + 2 red wires that were connected. will it still work or should i solder black to black and red to red?
Also need 3rd wire(white or yellow), you can use single red and black wire, remove battery circuit for 3rd wire, this wire used for temprature and its important for circuit
@@LittleBitTechInfo Thanks for your quick reply!! but not sure i understand.
I cut all 5 wires and threw battery. there's one white for temperature as you say. so should i join two blacks of battery together and two reds of battery together because they transfer electricity onward or can i connect the power supply to the battery red and black instead of connecting them to the broken plug red and black
Yes you can connect upto 4.2 Volts on red black wire, but if not power on, you need battery pcb for 3rd wire, watch this video, what you need to do ua-cam.com/video/sfruqxppbIo/v-deo.html
Thanks! dug the battery out of trash, took out PCB and soldered back to battery wires and it works!
@@LittleBitTechInfo i get these pop noises in higher volume because it's a 5.0v charger. is there a simple way to limit the voltage to 4v?
⚠⚠⚠ 1:11 WATCH OUT so you don't break your button cover!
My Flip 3 has screws that need to be removed to detach the middle cover.
I just found it out the hard way.
I pulled the cover just like he did in the video and broke the plastic around the screws :(
Hey man my start button of flip 3 is totally broken can you please make a video on that or how can I get it fixed?
FYI - NOT ALWAYS MICRO SOLDER FIX NEEDED: Just fixed my daughter's non-charging Charge 3 after switching out the battery which WAS NOT THE ISSUE. Not sure this is the more likely problem with the USB port but in ours, the 5-point contact piece within the USB metal housing was broken rather than the full metal housing piece which is soldered to the board. I was able to grab that mostly intact L-shaped piece which is plastic and then first tested it while carefully holding in in place and connecting a charger cable>>>>lights on speaker came on and started blinking!!! So, next got some quality plastic glue - E6000 craft adhesive - I had around and using a paperclip and needle was able to lightly and cleanly coat the remaining plastic broken post and also the inside of the metal USB housing that attached to the board. This glue is hard to work with in a small space but you have a few minutes before it sets up to apply to both pieces then fit into place.
Let set 24 hours and tried to gently connect>>>WORKING GREAT. Probably need to be gentle with using port but I think I got enough glue in place to make it stronger than original.
Wanted to post because I bet this broken plastic is probably the part that needs repair for many and the fix DOES NOT REQUIRE any micro-soldering tools or expertise,,,,well, maybe similar expertise, but with the E600 glue which can be tough.
Good luck all
Work over time and buy a new one....keep US economy go strong and make you HAPPIER....kkkkk This is a toy anyway
09:17
How should I know which one is positive and which one is negative wire?
I bought but I fucked up the entrance
Red positive and black negative, Check the diffrences, Thickness off the mount, thick is negative and thin is positive, Hope it helped
I founded many videos of replace battery of a JBL Flip 3, but no one has the parts like this video. But here you dont replace the batery, and your video replacing it is from the other model different of this one. 😞 Dont know how to dismount this one to replace battery 😕
The charging port print is broken of my jbl charge 3 .how can i fix it
The board got damaged during the repair. How can I bypass the board and put a cable end coming out of the speaker? I don't care about losing the aux input.
Is the product you repaired original?
Yes 100%
Can you make a video with a jbl charge 3 I want connect like that
If i have i will, you can watch any charging port replacement video, and joint direct wire in black and red wire
Is it safe? Does it have the possibility to over charge?
Charging circuit is inside main pcb, this is the only charging ways
With that way of repair, is led light indicator will still stop blinking when the battery is full?
Yes ofcourse
Can you share how much it costs to fix this problem???
Iski repairing kahan per hoti hai
Bro spiker ka link do mera v kharab ho gaya hai mujhe v change karva naa hai
Bhai speaker ka nhi pata mulega ya nhi
How old this speaker
Bhai...Iska Proper Charging Jack kaha mil skta hai....har mahine baad Charging Jack khrabh ho jaata hai
Bhai pahle ho laga hua tha, uska sample leke spare parts ki shop pr search karo
@@LittleBitTechInfo humre yaha Jo mein Spere part wala hai...uske pass bhi ni hai..or iss me jio wifi dongle me same jack lgta hai
Meien toh pura google search kr ke dekh lia pr same jack ni mil rha ☹️
Why don't they just sell replacement pieces that have the aux/charge port both on the board- so all we would need to do is plug it in
Mera bhi JBL speaker ka Jack kharab hai Kahan thik karaon please batayen
Mera JBL ki body damage ho gayi hai, agar apka kharab hai aur bechna chahte hai to pls let me know
Saan to boss,,ang shop
Why did JBL make this charging port so cheap!?
Fake jbl
Time to buy a new one keep US economy going good and strong..if you live in a 3rd world countries then try to fix but if you lived in the USA....TRASH THEM QUICK..buy a new FLIP 6 OK... US $$$$$
Good video but f*ck it, I’ll just buy another one. 😂
Bro maine aap ka video dekh kar sahi kar dia but mera ek friend ne wire worng connection kar dia uska abhi charge nahi ho raha hai ek hi light show kar raha hai aur on off karo to jo tone ati thi wo bhi nahi aa raha hai,koi solution hai please batao,9833112009 pe please call kar sakte ho ya aapka number dijiyega
Can u fixed my jbl flip 3?
At least cover one cable before you close it
Hello Rimuru, I used Jumper wire so It has already a thin insulation
Why it looks like crap i have a flip 3 se lol
What a stupid solution. You have a soldering iron, so just desolder the charging board.. omg.
Don’t like this video. Don’t follow this channel. Your welcome
(!) business symbol say EVERYTHINGS