Atezr L2 24W Engraving Laser with Auto Focus function including Air Assist controlled by Application
Вставка
- Опубліковано 2 сер 2024
- #ErCanEverything #Atezr #Laser
🔥This powerful laser module consists of 4 x 6W laser diodes, which make its total power 24W and it can easily engrave to steel and cut 18mm board in just 1 pass.
📌Using the Atezr L2 you will no longer need a UPS, because it has a function to resume engraving after power failure.
📌The Atezr L2 also have autofocus function, which makes it easier to work.
📌You can buy from here👉 shln.top/CWPOIBKx
0:00 - Intro
0:15 - Unboxing
5:19 - Contents of the package
5:43 - Detailed assembly
10:11 - Mounting and adjusting the laser
11:43 - Prepare a test file for engraving
12:25 - 1st Run
12:30 - Autofocusing
12:52 - Speed and Power sample engraving
14:06 - Engraving on a Steel wood cutting disc using JPG file
14:52 - Engraving on the cutting board
15:37 - Photo engraving
16:25 - Engraving on 3mm black acrylic using a Vector file
18:31 - 18mm wood cutting performance
20:32 - 18mm wood cutting performance 2nd try
21:35 - Engraving on a Steel wood cutting disc using Vector file
22:30 - Function to continue engraving after power failure - Навчання та стиль
Congratulations on your new Laser, Brother! 🎉
It does good job! Ideal for hobbyists!
But how it manages to cut 18mm wood is just amazing 😳
And continued after power failure, just awesome ✌️
It will be an ideal assistant for future projects, I'm sure of that ✌️
Thank you Brother🙏
It was a little difficult to get used to working because it is my first laser, but I think it will do a lot of work for me in the workshop. 🙌🙂
This would be a great improvement for your projects ❤ Great footage 👍👍👍👍
Thank you my Friend🙏🙂🤝
I think it will make my job a lot easier🤔
good JOB Respect!
Thank you my Friend🙏🙂🤝🤝🤝
Güzel ürün
Teşekkür ederim Dostum🙂🤝
👍👋👋😉
👋👋🙂🤝
🔝🔝🔝
🙏🙂🤝🤝🤝
16:07 Bewegt sich die Z Achse automatisch während der Gravur, und passt den Focus permanent an? Oder stellt der Focus sich nur einmal vor der Gravur ein und fährt dan mit dem eingestelltem Focus kontinuierlich durch ?
It focuses only once at the beginning, but when cutting thicker material, the focus can be set and then focusing automatically with each pass.
@@ErCanEverything Bilgi icin Tesekürederim 🙏👍
Bu benim 3üncü lazer tanıtımım ve doğruyu söylemek gerekirse aralarından en iyisi ve kalitelisi bu çıktı.
Heleki 36W olanını alırsanız başka gerekmez.🙂
hi, please how to check if the machine is set to full power...thanks..
I'll check back later and write to you.
thank you very much...
1. In LightBurn, on the bottom right, select your laser.
2. In the upper left towards the middle, select the icon screwdriver with a wrench (Device Settings)
3. In the window that opens, in the lower right have S-value max must be 1000.
In one of my lasers that I added manually, the value was 255 and I went crazy until I found it.
@@ErCanEverything thank you very much
@user-yi8bz7bl4l I'm glad if I was able to help with something🙂🤝
But whether the value was different than 1000?
Sponsored? 🤮
What's wrong with sponsored content, except bias of some reviewers. I got also sponsored goods, which sellers says, say your honest opinion on this product which is fair I think. Yes, maybe some sponsors want to be shown only Positive sides of the products, but a respectful creator can withstand against this kind of manipulations!
And this video ua-cam.com/video/Bax3e-E6Pys/v-deo.html is sponsored, but I showed you the difference right?
Please check carefully time interval 2:18 and 7:01
🙏🙏🙏❤️